transfer system used for sale

ZUMBACH MSF 14 ist eine Rundtakt Transfermaschine mit ausgeprägter Präzision, hoher Genauigkeit und Zuverlässigkeit. Kapazitäten: 14 Arbeitspositionen; Weg des Tisches 20 mm; Längsschlittenweg bis 40 mm; Querschlittenweg bis 40 mm; Spindeldrehzahl von 3000 t/min bis 18000 t/min; Produktionskapazität 35 pce/min. Technische Daten: Anschluss 50 Hz 3x 380 Volt; Maschinengewicht ca. 3500 kg; Abmessungen L1800 x B1600 x H2100 mm. Entwickelt für enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

ZUMBACH - JUROCA Z 14 ist eine Rundtakt Transfermaschine hoher Präzision, ausgelegt für hohe Genauigkeit und Zuverlässigkeit. Kapazität: 14 Arbeitspositionen, 6 CNC-gesteuert, 8 mechanisch; 1 Be-/Entladeposition; Tischhub 20 mm; Arbeitsbereich 40 mm; Schraubendurchmesser 75/35/42 mm; Spindeldrehzahl 3000–18000 t/min; Produktion 35 Stk/min. Technische Daten: Anschluss 3x400 V 50 Hz; Gewicht ~3500 kg; Abmessungen Maschine 2000×2000×2400 mm; Steuerung 1200×1200×2100 mm. Ausstattung: Steuerungsschrank (Abmessungen angegeben). Erzielt enge Toleranzen; Branchen: Automotive, Uhrmacherei, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

PFIFFNER / HYDROMAT HB 32/16 ist eine CNC-Transfermaschine, ausgelegt für präzise Bearbeitung, hohe Genauigkeit und zuverlässigen Dauerbetrieb. Arbeitskapazitäten: 16 Positionen; Stangenlademagazin IEMCA. Technische Daten: Anschluss 50 Hz, 3x 400 V; Maschinengewicht ca. 6500 kg; Abmessungen L 9800 mm × B 4000 mm × H 2900 mm. Hochdruck-Kühlmittelanlage: 60 bar. Ermöglicht enge Toleranzen; typisch eingesetzt in Automotive, Uhrentechnik, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

CONTROLS   PLC SIEMENS SIMATIC OP 47-12 PRESS FORCES   total force (nominal): 200 to PRESS TABLE   table surface (left-right): 2440 mm   table surface (front-back): 1500 mm SLIDE   table surface (left-right): 1500 mm   table surface (front-back): 1100 mm   stroke: 180 mm SLIDE (MECHAN. PRESS)   slide adjustment: 150 mm   stroke rate (min.): 20 /min   stroke rate (max.): 120 /min   main drive power: 45 kW OVERALL SPECIFICATIONS (COIL LINES)   sheet thickness max.: 2.5 mm DECOILER   sheet width max.: 300 mm   sheet width (min): 30 mm   coil weight max.: 3 to   max. diameter of coil: 1500 mm   mandrel expansion range from: 460 mm   mandrel expansion range up to: 530 mm LEVELLER UNIT   sheet width max.: 30 mm   sheet width (min): 300 mm   number of leveller rolls: 9   diameter of leveller rolls: 30 mm   number of intermediate rolls: 11   feed  ...

The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-49495-312

The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-49495-459

The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-49495-412

Used Zebra industrial label printer in the ZT220 version for thermal transfer and direct thermal printing. The device has a network connection (Ethernet/WLAN) and supports various media loading options (standard, cutter, peel-off). Typical applications are warehouse, logistics and production markings with barcode and text labels. The device is used and shows normal signs of use due to use. It is complete and available with a power cord. Scope of delivery: 1 Zebra ZT220 label printer 1 power cable Multiple label rolls (62 x 40 mm, white, direct thermal) Model: ZT220 Printing method: Thermal transfer / Direct thermal Power supply: 100–240 V AC, 47–63 Hz Max. power consumption: 2.8 A Interfaces: Ethernet, WLAN Serial number: 52J134100866 Part Number: ZT22042-T2E000FZ ― Length: approx. 62 cm Width: approx. 40 cm Height: approx. 30 cm Weight: approx. 35 kg Auction-ID: A7-4 ...

Liebherr LH 22 M Industry Litronic GK9 mobile handling machine – Dehaco sorting grab – 2022 – 6,291 hours Specifications: Brand: Liebherr Type: LH 22 M Industry Litronic Version: GK9 Year of construction: 2022 Serial Number / PIN: WHLZ1250CZK143445 Operating hours: 6,291 hours Engine: Liebherr D924 Number of cylinders: 4 Engine power: 105 kW / 143 hp Emission Standard: Stage V Boom length: approx. 5.50 m Stick / spoon handle: approx. 3.50 m Horizontal working range: approx. 10.6 m, depending on equipment Maximum visibility height: approx. 5.23 m Tires: 10.00 R20 solid Maximum driving speed: approx. 20 km/h Permissible total weight: 23,000 kg Dimensions L x W x H: approx. 8.60 x 2.60 x 3.17 m CE marking available Features: Dehaco DSG1102 hydraulic sorting grab GK9 Handling Equipment Hydraulically Raisable Eye Level Cab 4 hydraulic outriggers Ergonom ...

Performs western transfers simply, efficiently, and reliably, in seven minutes and without liquid buffers THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-232

The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-50066-412

The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-50066-459

The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-50065-459

The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-50066-312

The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-50065-312

The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-50065-412

linear axis:: - travel -x axis: - mm weight max. in kg: - kg total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitudinal feed: - mm slides vertical travel: - mm grip- and swivelling device: - weight max. in kg: - kg Control: Sinumerik total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Special price for pickup EXW / EX Foundation from the Osterburken site Linear/gantry axis system in heavy-duty industrial design Long horizontal X-axis 2 vertical linear axes / Z-axes Two separate handling units Rack-and-pinion drive on the horizontal axis Servo motors and gearboxes Power transmission via energy chains Pneumatic components and gripper technology Sensors and limit switches Complete cabling Separate industrial control cabinet Siemens SINAMICS servo drive technology Multiple SINAMICS motor modules / power modules Siemens industrial control and operator components Operator panel on the control cabinet Safety and switching technology Various decentralized I/O and ...

Quantity: 6 printers, sold as one set Models: 3x ZM600, 2x 105SL, 1x ZT510 Type: industrial thermal transfer label printers with LCD control panel and metal housing Application: production line traceability labelling; one unit carries a line 5L traceability label Remarks: each printer carries a plant network label. No print width, resolution, options or operating data confirmed by the seller; no dimensions or weight stated. Auction-ID: A1-48805-243

pressure:1000 t table length:4000 mm table width:1600 mm Controls:SIEMENS S7-1500F PRESS DESIGN:. - frame design : Transfer press :. - Drive type : mechnical :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. - number of tables:2 PRESS FORCES:. - total force (nominal):1000 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):1600 mm - height above floor level:600 mm - autom. tool clamping device : yes :. RAM:. - stroke:400 mm RAM (MECHAN. PRESS):. - ram adjustment:300 mm - ram adjustment:100 mm - number of strokes min:8 /min - number of strokes max:50 /min - hydraulic overload protection : yes :. TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):900 mm - shut height (stroke down, adjustment up):766 mm - distance between columns (H-frame):4250 mm - Free passage between side c ...

AGFA Soeicherfoliensystem (CR System) ADC Solo MUSICA Computer TFT LCD Monitor Model No. B18XA_Bj. 2001 • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Carestream (Kodak) Storage Film System Elite as Spare Parts Dispenser First processing station consisting of computer/monitor/keyboard/mouse and software 2. Workstation 5 Kodak CR cassettes PQ: 35x43 - 2 pcs./ 35x35 - 1 pcs./ 24x30 - 1 pcs./ 18x24 - 1 pcs. Barcode scanner UPS Emergency Power • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technici ...

AGFA Storage Film System (CR) CR 85-X (mammogenic) with: First Processing Station 6 AGFA CR MM 3.0 Mammo cassettes: 18x24 - 2 pcs./ 24x30 - 4 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Konica Minolta Storage Film System (CR) Regius 190 (mammogenic) with: First Processing Station • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Cleanming and Degreasing Plant Part washing system - Part cleaning system - Degreasing system Manufacturer: Reintec Previously used detergents / detergents: acetone, caustic soda Previous use: Cleaning of cast resin molded parts System and workpiece holders stainless steel Spray washing process 3-chamber system Inner chamber: washing chamber with nozzle system Outer chambers for reciprocal assembly of washing baskets Mounting systems or baskets for various workpiece shapes and dimensions available Dimensions total approx. 600 x 130 x height 200 cm

For sale we offer a measuring and weighing system for packages from Bedal. It is a perfect system for all package acceptance or shipping. It can be used for example.B: In shipping at industry, wholesale or e-commerce, fulfillment service providers (e..B. forwarding agents, logistics), or at parcel reception points (e.B. courier services). Package dimensions: Min. BxWxH 10x10x4 cm Max. BxWxH 43x41x48 cm undressed max: LxWxH 75x41x48 cm Tolerance: LxWxH 1.0 x0.5 x 0.5cm Weight: 0.25kg: 0.05Kg (50g) / 25-32kg : 0.075kg (75g) Parcel Kiosk is an economical solution for weighing and dimensioning packages. It is certified by the international organization OIML. Automating packet measurement improves efficiency and saves resources. Thanks to the Parcel Kiosk system, you can be sure that accurate weight and dimensions are read and that your company is protected from errors an ...

AGFA Imaging Plate System / CR System CR 30-X (for Veterinarian) Primary processing station 3 CR cassettes • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or system components must be carried out by the manufacturer or by a specialist or technician authorized b ...

Betschart Swiss Transformer Core Testing System KPA 15 Function The output voltage, which can be infinitely adjusted by hand by means of a rotary knob, is guided directly to the excitation coils of the test core. In this way, an electromagnetic field that is as homogeneous as possible is to be built up in the air gap of the test core, with which nuclear material inserted in the air gap can be characterized. The basic operation of the core test system is carried out via the switching and display elements on the front panel at the front of the test trolley. Specifications Input voltage : 2 x 400 V – 50/60 Hz Input current : 38.3 A maximum Output voltage : 0 ... 230 V Output current : 65 A maximum Measurements : Rotary iron voltmeter 0 ... 500V for input voltage Rotary iron voltmeter 0 ... 250V for output voltage Rotary iron Ampèremeter 0 ... 40/80A for input current Rot ...

AGFA CR System CR 85-X: First Processing Station (Workstation) AGFA CR MD4.0 General cassettes and ADCC HR Kassetten_ different sizes 18x24, 24x30, 35x43 (11 pieces)

Carestream (Kodak) Storage Tray System (CR System) DirectView CR 500 (untested) First processing station consisting of computer/monitor/keyboard/mouse Diagnostic workstation 4 Kodak CR cassettes • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Carestream Storage Sheet System (CR) DirectView CR 975 with: 2x control panel 24 cassettes: 18x24 - 7pcs./ 24x30 - 8 pcs./ 35x43 - 9pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Konica Minolta Storage Film System (CR) Regius Sigma II with: First Processing Station 5 RC-300 CR cassettes: 18x24 - 1 pcs./ 24x30 - 2 pcs./ 35x43 - 2 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Bous Waschfix WSA 70 T3 Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix WSA 70 T3 Usable space: 700 mm Filling quantity: 180l / 180l Temperature +70 / +70 °C Heating: 12 / 6 kW Extraction: 0.25 kW Drying: 5 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 54 A 400 V Year of construction: 2009 Extras: Ultra-fine filters Draining pump Filter monitoring More items - new and used - can be found in our shop! International shipping costs on request!

With plastic inserts on 1 pallet Auction-ID: A1-48959-128

Einbrenn-System Kodak TSO-850 High-Speed Thermo-System / Baking-System Kodak-TSO-850 High-Speed Thermo-System Year 2007 - Serial-No. 1369 Arbeitsbreite / Working width max. 850mm Elektrischer Anschluss / Power supply: 400V / 50Hz / 40A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Bar Tensioning System - Post-Tensioning System DYWIDAG 4 pieces of post-tensioning systems for reinforcing steel Pressing force 60 tons for rod types up to WR 32 Piston stroke 50 mm Piston area 132.54 cm² Operating pressure max. 500 bar Length of the jack 401 mm Total weight of the 4 presses 160 kg

Extraction system, central extraction, room air filter system ETS Efficient Technical Solutions GmbHZentral welding fume extractionYear of construction approx. 2005Volume flow approx. 5000 m³/hExtraction connection at the filter inlet 1200 x 150 mmExhaust air connection at the filter outlet 400 x 300 mmEngine power 10 kWNet connection 400 Volt, 50 Hz - Control cabinet for wall mounting- Bag filter- Maintenance flap for filter change- Centrifugal fan on top of the systemSpace requirement L x W x H 2000 x 1650 x 3650 mmTransport height without Fan 3100 mmWeight

Suspension crane runway Crane system DEMAG type KBK 1Year of construction approx. 2000Monorail overhead track with monorail crane bridgeLight crane system system made of KBK modular system profilesLifting capacity: 125 kgSpan: 5 metresDistance longitudinal rails: 4.1 metresLongitudinal beam length complete: 12 metresGirder profile cross beam = KBK1Girder profile longitudinal rails = KBK1Consisting of:29 metres System profile KBK-1 (4x 6000 mm + 1x 5000 mm)1 piece carriage for the crane suspension2 pieces Double carriage for the longitudinal rails10 pieces Screw claws for the

Filter system - extraction system, central extraction cartridges - impulse filter VALCO type Pidclean 4NZentral welding fume extractionseries. No.: 15003 Year of construction 2003Volume flow max. 3500 m³/hFilter area 92.8 m²Differential pressure 700 PaExtraction connection at the filter inlet 250 mmExhaust air connection at the filter outlet 225 x 160 mmCompressed air requirement 4 to 6 barMotor power 5.5 kWNet connection 400 volts, 50 Hz filter control AUTEL, type Eco S6- pneumatic filter cleaning, automatic via control - 4 pieces

For sale is a system that was used for the sorting of frozen fruit for the foreign body rejection. The system then weighs and packs them into tubular bags. Functional sequence: Transport via incline conveyor to the vibrating table for separating the fruits. The fruits then reach the BEST laser system LS 9000, which detects foreign bodies and blows them out by means of approx. 80 air nozzles. Lasers can be reprogrammed by running so-called good goods, i.e. goods without defects, through the machine. The laser recognizes the surface structure on the basis of a point cloud and thus knows what is good or bad goods. The product then goes to the conveyor belt with metal detector and visual inspection Finally, the fruits are transported again via an incline conveyor for weighing and filling into tubular bags. Weight per bag can be between approx. 10 to 25 kg. Docume ...

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system: -Filter frame: 2190/1460/H2080 mm -Vibration motor: 0.25 kW -Funnel frame: 2235/1440/H2520 mm -Opening: Ø 390 mm / 500 x 220 mm -Individual components: see photos -Weight: 200 kg / 590 kg

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system: -Filter frame: 1400/1995/H2100 mm -Shaking motor: 0.25 kW -Funnel frame: 1400/1995/H2350 mm -Opening: Ø 500 mm / 500 x 220 mm -Individual components: see photos -Weight: 220 kg / 521 kg

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system -Filter frame: 2135/2135/H2030 mm -Vibration motor: 0.55 kW -Funnel frame: 2100/2130/H2330 mm -Discharge gear motor: 2.2 kW 8.7 rpm -Opening: Ø 250 mm / 250 x 220 mm -Individual components: see photos, without extraction fan -Weight: 320 kg / 890 kg

Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Condition: The system is unused -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P -Cyclone separator: made of stainless steel -Inlet opening: Ø 110 mm -Outlet opening: pneumatic shut-off valve Ø 300 mm -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm -Weight: 1120 kg

Fuji Imaging Plate System / CR System FCR Capsula X with: Reader Type CR-IR 357 Primary processing station 10 cassettes IP Cassette Type CC: 24x30 - 6 pcs./ 35x43 - 4 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are used and sold as is, unless otherwise stated. We do not give any guarantees or warranties for the devices sold. It is the buyer's responsibility to ensure that all equipment is thoroughly inspected and overhauled by qualified technicians prior to use on the patient.

Fuji Imaging Plate System/ CR System FCR Capsula X with Reader Type CR-IR 357 Primary processing station Cassettes IP Cassette Type CC: 18x24 - 2 pcs./ 24x30 - 2 pcs./ 35x43 - 2 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • To recommission the device, you will most likely need a license from the device manufacturer. • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are used and sold as is, unless otherwise stated. We do not give any guarantees or warranties for the devices sold. It is the buyer's responsibility to ensure that all equipment is thoroughly inspected and overhauled by qualified technicians prior to use on the patient.

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Donaldson, Filter system cartridge filter -Type: Torit Downflo DF 6 -Motor power: 3 kW -Volume flow rate: 2500 m³/h -Filter cleaning: pneumatic -Extraction opening: 3x Ø 320 mm -Dimensions: 1650/1300/H2740 mm -Weight: 835 kg