transfer press used for sale

Unused Working pressure 150 bar – 15 MPa Maximum pressure 150 bar – 15 MPa Capacity 900 l/h – 15 l/min Maximum temperature 90 °C Burner power 3.6 kW Engine power 3.2 kW Nutrition 230 V/50 Hz Detergent tank Diesel Weight 35 kg Auction-ID: A1-40407-40

Temperature range max.: 140 °c; capacity: 900 l/hr; diesel-fired: yes; power: 7.3 kW; connection: 400 V; unused in wooden box; 4496; Auction-ID: A1-51256-242

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-51256-525

Unused in the original packaging The HDR180 petrol pressure washer offers complete independence from external power sources. Thanks to the powerful 7 hp Swedish motor, it can handle even the most demanding cleaning jobs. The robust Swedish outdoor equipment is specially designed for use in harsh conditions. As a special highlight, the Swedic Outdoor line has shock-absorbing buffers at the front and rear, a parking brake, an exhaust guard and large, solid rubber wheels for maximum mobility. Technical data: 7.0 hp OHV petrol engine with low oil protection Commercial Grade Direct Driven Cylinder Axial Pump 20 m high-pressure hose for maximum reach Quick connect nozzles: 0°, 15°, 25°, 40° and chemical nozzle Adjustable pressure up to 180 bar Low-pressure detergent injector for efficient detergent application High-pressure spray gun for precise work 2 m water inlet hose with filter for ...

380V; Motor: 4000W; Max. Flow: 14L/min; Max. pressure: 200 Bar; Max. intel water temp: 50 degrees; Power cable length: 3M; Automatic stop; Filter; High-pressure hose 10M; Spray nozzle 5759 Auction-ID: A1-51256-361

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-51256-524

Unused , 58kw , speed 1450 max 15l/min , working pressure 20mpa , max pressure 21 mpa Auction-ID: A1-40407-32

380V; Motor: 4000W; Max. Flow: 14L/min; Max. pressure: 200 Bar; Max. intel water temp: 50 degrees; Power cable length: 3M; Automatic stop; Filter; High-pressure hose 10M; Spray nozzle 5759 Auction-ID: A1-51256-362

unused; various accessories; PU tapes; soap container; rated pressure 18.6 MPa; 3509 Auction-ID: A1-51256-62

Brand: Life Fitness Model: Signature Series Chest Press Type: Strength Training Machine Condition: Correct Condition / Functional / Rust / Some Signs of Wear Dimensions: 145 × 132 × 180 cm Auction-ID: A1-50612-3

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-51256-404

Robust metal structure with several adjustable clamping stations. Parallel groove work table, equipped with 3 set screws with operating handles. Set on metal frame with mobile supports on wheels, ideal for pressing and assembly operations. Size: 2500 x 1250 Functional Auction-ID: A1-51273-24

Temperature range max.: 140 °c; capacity: 900 l/hr; diesel-fired: yes; power: 7.3 kW; connection: 400 V; unused in wooden box; 4496; Auction-ID: A1-51256-241

Unused, Led display, 1000W, 2800RPM, 0.3-0.9MPA Auction-ID: A1-40407-118

Has N2 Nitrogen been in; Test pressure 16.5 bar; blue lacquered metal; equipped with lifting eyes Auction-ID: A1-50864-196

Brand: Life Fitness Model: Signature Series Triceps Press Type: Strength Training Machine Condition: Decent Condition // Functional /Rust / Some Wear Dimensions: 163 × 109 × 163 cm Auction-ID: A1-50612-4

Auction-ID: A1-51211-62

crimping range 15-63mm; max opening 75mm; pressure 53.5 Mpa; force 500 T; 3000W; 380V; 5585 Auction-ID: A1-51256-346

Galvanized metal; equipped with lifting eyes Auction-ID: A1-50864-92

230V-50Hz; 1PH; Max 60C; 150BAR; 10.0L/min; including spray lance; Auction-ID: A1-51256-4090

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-51256-405

On adjustable tripodLot is equipped with flange valves and wall-mounted pressure gauge Auction-ID: A1-50864-80

380V-50Hz; 3PH; Max 60C; 200BAR; 14.0L/min; including spray lance; Auction-ID: A1-51256-506

unused; various accessories; PU tapes; soap container; rated pressure 18.6 MPa; 3509 Auction-ID: A1-51256-63

Unused, Led display, 1000W, 2800RPM, 0.3-0.9MPA Auction-ID: A1-40407-47

230V-50Hz; 1PH; Max 60C; 150BAR; 10.0L/min; including spray lance; Auction-ID: A1-51256-1701

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-51256-4055

Test pressure 16 bar; blue lacquered metal; equipped with lifting eyes Auction-ID: A1-50864-91

Tank capacity is 2000 liters; Lot is sold up to 1st flange coupling; equipped with lifting eyes Auction-ID: A1-50864-79

Colin BP-508 – Blood Pressure Monitor Manufacturer: Colin Model: BP-508 Type: Vital Signs/Blood Pressure Monitor Condition: Used, Functional Tested Suitable for Recovery Room, Outpatient Surgery, Endoscopy and Emergency Department. Auction-ID: A1-51275-10

Metal construction with cylindrical hopper, filling valve, . Equipped with a set of taps, All connection fittings and lever valve control included. Functional Auction-ID: A1-51273-36

proof pressure 16.2 bar; equipped with lifting eyes Auction-ID: A1-50864-67

Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W Auction-ID: A1-40407-111

crimping range 15-63mm; max opening 75mm; pressure 53.5 Mpa; force 500 T; 3000W; 380V; 5585 Auction-ID: A1-51256-347

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-51256-526

380V-50Hz; 3PH; Max 60C; 200BAR; 14.0L/min; including spray lance; Auction-ID: A1-51256-95

Tank capacity 5000 liters; proof pressure 15.73 bar; equipped with lifting eyes Auction-ID: A1-50864-82

Additional information Brand: Daewoo Type: DHPW-7300 Condition: unused, in the original packaging Working pressure: 200 bar Temperature: 30°C to 140°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Auction-ID: A1-40407-125

pressure: 60 t throat: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Handover: in its current state as seen -Control: not working -Manufacturer: GEV GEBR. EDELHOFF, Single-column eccentric press type EPR 35 -Pressure capacity: 35 tons -Coupling: pneumatic -Drive: 3 kW -Stroke: adjustable 5 - 75 mm - Stroke rate: 120 rpm -Table size: 500 x 380 mm -Table cutout: 220 x 175 mm -Protrusion: 195 mm -Punch holder: Ø 40 mm -Insertion height 310 mm -Dimensions: Press 1520/920/H1960 mm / Control 800/400/H1100 mm -Weight: 1729 kg / 132 kg

: neu : ca. 12 Wochen ab Auftrags : Türkei : 62500 € : 1181.25 € : 40 to : 1250 mm : Y1 / Y2 / X und R Achse : 200 mm : 1050 mm : 250 mm : 440 mm : servomotorischer Spindela : 115 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 1950 mm : 1450 mm : 2650 mm : 3600 kg servomotorized spindle drive 4 axes (Y1, Y2, X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm tran ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 65200 € : 1232.28 € : 40 to : 2050 mm : Y1 / Y2 / X und R Achse : 200 mm : 1700 mm : 350 mm : 440 mm : servomotorischer Spindela : 180 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 2600 mm : 1450 mm : 2650 mm : 4400 kg servomotorized spindle drive 4 axes (Y1, Y2, X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm tran ...

Gebr. Slotted Hole Drilling Machine JAGO Type: B2 exact year not known 1-lever operation Dowel pitch: 16 / 22 / 25 / 32 mm Drilling depth: 150 mm Height adjustment by handwheel Height display via counter Table size 300 x 600 mm 2-jaw chuck (up to 20 mm) 2 pcs. eccentr. Workpiece clamp 90° stop Workpiece stop on the side Extraction connection: 80 mm Weight: 230 kg Manufacturer information Good condition! The machine from a 1-man workshop

CONTINUOUS STEAMING AND SHRINKING OF YARNS THROUGH WATER VAPOR AT 100°

Key data: 40 t, 1500 mm

1500 x 40 ton Cybelec Cybtouch 12" X & Z Axis

Rated force: 125t, stroke adjustment: 20-140mm, ram adjustment: 80mm, stroke rate: 50/min, motor power: 10HP, drive: mechanical eccentric drive, machine is fully functional, maintenance, repairs and safety inspections have been carried out regularly, inspection logbooks and inspection reports are available for the period 2010-2025, extensive maintenance and repair work has been carried out in recent years, including work on the connecting rod and connecting rod bearing, eccentric bushing, bearing points, gear coupling, brake and clutch shoes, bearings, bushings, lubrication system, lubrication pump, parallel keys and other components. On-site inspection is possible.

Pressing force: 100t, distance between uprights: 1030mm, stroke: 600mm, max. installation height: 900mm, table dimensions X/Y: 1000mm/1000mm, table height above floor level: 850mm, lateral opening between uprights: 540mm, ram dimensions X/Y: 900mm/1000mm, oil capacity: 500l, drive power: 30kW. Machine dimensions X/Y/Z: approx. 2000mm/1700mm/4200mm, weight: approx. 10t. The press was mainly used for die tryout and pressing small batches. Documentation available. An on-site inspection with the machine powered on is possible.

Offered is a sheet-fed offset printing press with automatic perfecting device. Min. sheet size: 100 × 148mm. Max. printing area X/Y: 650mm/460mm. Printing speed: 4000-15000 sheets/h. Impression count: 21 million. Substrate thickness: 0.04-0.4mm. Printing plate size X/Y: 650mm/550mm. Printing plate thickness: 0.20-0.30mm. Rubber blanket size X/Y: 579mm/648mm. Rubber blanket thickness: 1.95mm. Gripper margin: approx. 10mm. Control system: Sakurai Interactive System. Inspection possible by arrangement.

Working width: 3000 mm working depth: 1200 mm Number of pressing surfaces: 3 Stk. range L-W-H: 4500 x 2200 x 2100 mm Weight: 1500 kg TRIMWEX hydraulische 3 - Etagenpresse Typ SLV - HPR3 - 100 Technische Daten - Arbeitslänge 3000 mm - Arbeitsbreite 1200 mm - Verleimdicke 20 - 100 mm - Anzahl der Ebene: 3 - Verpressung erfolgt mit einseitigem hydraulischen Zylinder - Anzahl der Zylinder pro Ebene 6 - die Druckzylinder sind fest - Zylindertyp Ø 50 x 150 mm - Spezifische Druck 4,5 kg/cm2 - Anzahl der Niederhaltern pro Ebene 4 - jeder Niederhalter hat einen pneumatischen Zylinder - Typ der pneumatische Zylinder Ø 50 x 75 mm - jeder Niederhalter hat eigenes Ventil für Ein/Aus der Luft - Druckregulation mit Regulator - Hydraulisches Aggregat - Pumpendurchfluss 5,5 l - Leistung der Hydromotor 2,20 kW - max. Druck für der Hydromotor 30 - 130 bar - Parkplatz für die Niederhal ...

Channel baler Paal Konti 275 D, built in 2001 with vorbulator and chain belt conveyor Paal KEM-1500, built in 2005 Technical data: Manufacturer: Paal Type Paal Konti 275 D Year of manufacture 2001 Operating hours 20900 as of 10/2026 Pressing force 75 t Total connection 106 kW Filling opening 1020 x 1550 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 12 t/h 60 kg/m³ approx. 21 t/h 100 kg/m³ approx. 33 t/h Bale weight 500 to 750 kg Transport dimensions approx. 11152 x 2152 x 2800 mm (LxWxH) Machine weight approx. 25,000 kg Type Paal KEM-1500 Year of manufacture 2005 Drive power: 5.5 kW Conveying speed: 0.29 m/s Nominal width 1500 mm Wheelbase 17500 mm Length of feed belt: approx. 10000 mm Length of climbing section: approx. 9000 mm Gooseneck: approx. 1000 mm Slope angle: 28° Materials: pa ...