138,069 used machines on RESALE, but how to find them? Machine Search
with the following standard equipment: Chromed cylinder, welded steel frame, oil pressure gauge, pressure adjustment Optional equipment possible for an extra charge: Pressure Regulator, V-Block, Automatic Control, Hydraulically Moving Cylinder Pressure: 80 t Stroke: 400 mm Total power requirement: 3 kW Machine weight: 725 kg Dimensions: 900 x 1560 x 2400 mm Passage in the table: 900 mm Working speed: 5.4 mm/sec Return speed: 8.3 mm/sec
Equipped with foot control. Complete with wooden base 92 x 92 x 92cm and some plastic eyelets. Auction-ID: A3-50009-37
Key data: 220 t, 4000 mm
with CNC-controlled crowning LazerSafe Safety system Foot pedal with standard tool set Machine in little-used condition Colour: turquoise/grey Total power requirement:f 15 kW Projection: 400 mm Stand width: 3150 mm Drive power: 400 V Back gauge: 625 mm Flow speed: 130 mm/sec Working speed: 8 mm/sec Retraction speed: 85 mm/sec Stroke length min./max:. 260 mm R-axis 150 mm Dimensions: 5100 x 1920 x 3080 mm Weight: 12250 kg Machine Number:M00000948 LZ: approx. 8 - 10 weeks, machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out.
horizontal pressure tank, steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater or above ground with brackets, e.g. for molasses, AHL, ASL, water, corn mixture Volume: 32,000 L Dimensions: Ø 2.50 × 7.0 m long
Pressure silo 29 m³ volume, payload 46 to, dead weight 3000 kg Diameter 2500 mm, height 8600 mm Spout height 1250 mm / 900 Ball valve DN 65 Inspection Cover NW 500 Blow-in line, vent line
Silo 20 m³ volume with hook holder Payload 28 to, dead weight 2500 kg Diameter 2500 mm, height 6600 mm, outlet height 1100 mm Outlet NW 250 Blow-in line, vent line, inspection cover NW 500 Silo butterfly valve Footprints 2400 x 2500 mm Next Pressure Test 07/28
If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click: Contact us for a custom quote HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! 20T PHC Pellet Press Machine Type: Hydraulic Single Column Press Year of construction: 2023 Location: Gelsenkirchen, Germany Specifications: - Press force: max. 20 tons (at 250 bar) - Free tearing force: max. 20 kN - Print build-up time: max. 2 seconds (Closed tool steel on steel) - Maximum opening width: 500 mm - Stroke and minimum opening: 400/100 mm - Table height above floor: 800 mm - Total height: approx. 2400 mm - Hall height: at least 3,500 mm - Parallel deviation: +/- 0.1 mm at 20°C - Deflection:
Including 5x black, 6x magenta, 6x cyan and 5x yellow, Issue according to instructions Auction-ID: A3-50009-182
Pressure silo 34 m³ volume, payload 48 to, dead weight 3000 kg Diameter 2500 mm, height approx. 9000 mm Cone with air loosening Spout with ball valve DN 80 Inspection Cover NW 500 Silo Back Protection Ladder Blow-in line, vent line Pressure test book not available
# Description text for the press If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! Mold opener-closer with 40 tons pressing force Table and ram size: 1500 x 1000 mm for heated tools Specifications: - Pressing force: 40 tons - Maximum open height: 1800 mm - Tappet travel: 1500 mm - Oil Temperature Monitoring: Electric Air Cooling - Lubrication: Manual via grease fitting - Extending table travel: 1200 mm - Extending table speed: 30 mm/sec - Electrically infinitely variable ram: 180 degrees - T-slots: According to customer requirements - Pressure setting: From 10 tons to 40 tons - Monitor: 10" on the control cabinet for pressure adjustment and warning ...
Pressure silo 3 m³ volume, payload 4800 kg, dead weight approx. 1200 kg Diameter 1750 mm, stand dimensions 1700 x 1720 mm, Spout height 1200 mm / 900 mm Outlet flap NW 250, silo tip with ball valve DN 65 Filling lid NW 450 in the silo roof, Inspection cover NW 450 in silo cylinder Crane eyelets, forklift pick-up shoes Vertical ladder + platform
pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram adjustment: 85 kW table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: Ø280 mm table height: 830 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2560 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-50076-47
Pressure test book not available - sold as a free-fall silo Silo 34 m³ volume, payload 50 to, dead weight approx. 4000 kg Diameter 2500 mm, height approx. 9000 mm Outlet with silo butterfly valve NW 250 Inspection Cover NW 500 Blow-in line, vent line
SPECIFICATIONS: Dimensions of the work table mm: 2500 x 1300 Number of pistons: 4 Diameter Ø 90 mm Piston stroke mm: 470 Complete with intermediate plate Operation with water
Equipped with foot control. Auction-ID: A3-50009-38
Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of continuous strokes, min-1 12...18 Highest frequency of single strokes, min-1 9...13 Closed height, mm 1500 Adjustment of closed height, mm 400 Slider dimensions, mm from left to right 4500 front to back 2500 Dimensions of the die plate, mm from left to right 4500 front to back 2500 Main drive electric motor power, kW 200 Overall dimensions, mm from left to right 6745 front to back 5400 height above floor level 9360 Weight kg 320000
Key data: 250 t
Catalog No. : 7693 Type: CD 250 Producer: Mecamaq Made in: 2022 Characteristic: Pressing force: 250 t Maximum stroke: 250 mm Machine weight: 3200 kg
The press is function with two adaptor Pressing force max. kN 1800 Pull-off force max. kN 1500 Counterholding force kN 1200 in pressing position Upper punch stroke mm 220 Filling height max. mm 180 Pull-off travel max.mm 90 Pressing path max. mm 90 Distance of upper pressure max. mm 18 Drive motor kW 30 Stroke rate (infinitely adjustable) min-1 6-24 Pre-suspension. Distance max. mm 62 (surcharge). Force max. kN 5.3 Total height mm 4700 Total width mm 2360 without electricity Total depth mm 2700 Hydraulic unit Total weight, net kg 17000
Machine: 3-level deck press gluing star Brand: Altec Type: EB3P-6/18 B (Vario) Year of manufacture: 2000 CE Specifications: Press length: 3,740 mm Pressing units per floor: 3 places Insertion depth: 1,080 mm Press thickness: up to 80 mm Minimum press length: 400 mm Pneumatic pressing pressure: 25,000 N to 35,000 N at 10 bar Pneumatic hold-down devices: instead of mechanical (was an optional accessory) 18 pieces Pressure beams per working level: 6 x 600 mm Useful stroke: 50 or 80 mm Star rotatable: with hand crank Height: 1,900 mm Depth: 1,680 mm Length: 4,320 mm Weight: 1,700 kg
used
Used Hermetic Press - Plate Press for Concrete Slabs, Terrazzo Slabs, etc. Manufacturer: OCEM Type: OPA850 Year of Make: 1994 with washout system for exposed concrete, flat storage and steel pallets Used hermetic press - slab press for concrete slabs, terrazzo slabs, etc. Manufacturer: OCEM Type: OPA850 Year of construction: 1994 with washing system for exposed aggregate concrete, flat cycle and steel pallets
Hydraulic press manufactured in 2018. This Baykal APHS 31200 features a press force of 200 t and a bending length of 3,100 mm. With a maximum stroke of approximately 260 mm, it is designed for efficient bending operations. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31200 hydraulic press we have for sale. Contact us for further details.
Operating pressure: 11bar, capacity: 2000l; for more details see photos of nameplate Auction-ID: A7-50677-929
Unused in the original packaging Auction-ID: A1-50543-64
pressure: 20 t stroke: 200 mm table-size: 550 x 550 mm working speed:: 10 mm/ sec. work height max.: 940 mm toolpiece height max.: 200 mm total power requirement: 2,2 kW : 200 x 10 mm weight: 650 kg dimensions: 1,1 x 0,6 x 1,22 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WEINGARTEN DE 200-20 press built in 1975 in Germany is used for precision workpiece machining. The rigid construction combined with a high press force of 200 tonnes make the machine the perfect solution for mass production of various types of parts. The process of precision sheet metal pressing can be fully automated when the WEINGARTEN press is retrofitted with a sheet metal feeder. Technical specifications of the WEINGARTEN DE200-20 200 t press - press force: 200 t - maximum slider stroke: 200 mm - minimum slider stroke: 15 mm - maximum number of slider strokes: 60/min - minimum number of slider strokes: 20/min - slider adjustment: 110 mm
clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 300 x 300 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 300 x 300 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 76A fuse protection (incl. peripherals) - Pump output: 7.5 kW, 14.9 A - Total output: 28 kW Dimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mm Weight approx.: 2,250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 200 kN injection volume: 80 cm³ screw diameter: -- mm platen size: 350 x 300 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 20 t - clamping force: 200 kN - Heating platen size: 350 x 300 mm Injection unit: - Injection volume max.: 80 cm³ - Connected load: 3x 400 V, 50 Hz - Pump output: 11 kW - Total output: 44 kW Dimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mm Space requirement approx: 5 m² Weight approx.: 3.200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
for sale - PROFI Hydraulic Workshop Press HF2 30 tons Clear width 560 mm Hand and foot operation Piston stroke 160 mm Cylinder diameter 115 mm Weight approx. 165 kg further models and inquiries to FSA Maschinen AG
20,000 LITERS STORAGE TANK/ PRESSURE TANK/ BEER TANK GRESSER CAT NO: 24-0576EUBA MJ UNI KAR Link to product: https://eurolux.de/product/24-0576euba-20000-liter-lagertank-drucktank -biertank-gresser Specifications Surface outside 2B=IIIC ground Manufacturer: Gresser Surface inside 2B=IIIC ground Material V2A (AISI 304) 1.4301 Volume 20000 L Total height 4600 mm Cylinder height 3000 mm Diameter 2700 mm Operating pressure 0.99 bar Operating temperature range 20 C Vertical design Year of manufacture 1991 Number of feet 4 Last Use Food Technical Documentation No Topsoil: Clapper bottom 2 crane eyes Threaded Sockets Tank cylinder: Manhole oval 440 x 430 mm Tasting tap Ladder hooks CIP line DN 40 pulled down with airlocked casing Subsoil: Clapper bottom forward-drawn residual drain pipe with disc valve DN 50 4 fixed feet
HOT PRESS model OMC PL 90 , with diathermic oil heating second hand machine machine worked very very little excellent working conditions , like new CE compliant machine diathermic oil heating via built-in electric boiler heating power KW 9 / 18 for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm.85 max. thrust Ton.90 opening mm.400 hydraulic pump motor power Hp 3 n.4 racks for table lifting guide max. thrust 2.5 kg/cm2 total installed power 21 kW volt. 380/50 net weight kgs. 4500
maximum number of results exceeded
please refine your search
30 € 
