tractor unit used for sale

System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: UCF 646-00-35 Power: 110 kW Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzung of the root solution to power consump ...

RLA 160 Extraction system Dust nozzle diameter: 160 mm Engine: 2.2 kW 400 V 50 Hz Nominal volume flow at the nozzle: 1448 m ³/h Maximum flow rate: 2400 m3/h Filter surface: 9,21 m² Dust class M Residual dust content: H3 Chip collecting volume: 2 x 165 (193) l The maximum sound pressure level: 73 dB (A) Dimensions (L x W xH): 1755 x 830 x 1654 mm Weight: 267 kg G & pieces 5131620

Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of both screwing units - separately adjustable distance between screwdrivers 250-540 mm - automatic screw feeding - automatic disconnection of the feeder movement - screw depth sensor - foot switch control Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - feed force pressure reducer - additional manual slot for various screws - extended travel +30 mm to 130 mm - laser positioning pointer - screw depth sensor - horizontal pressure

Filter system for ref. No. 235-1659 with bagging device for big bags L x W x H: 500 x 200 x 600 x cm Weight 2300 kg Built in 1999 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

WSM Stationary screwdriving unit screwdriving station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started. Functional sequence The station is equipped with the pre-assembled assembly via the transfer belt. The work steps of the automatic station with a run of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled assembly in St.2.1 - Lowering the wearer with the scanner and the vision sensor - Scanning of the 3 codes (front panel, fro ...

Angular swivel unit, Accuracy 0.01°, SW100D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swing angle 180 [°] Torque 15 [Nm] Repeatability +/- 0.01 [°] swivel time 0.5 [s] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Operating temperature 5 ... +80 [°C] Cylinder volume per cycle 108 [cm³] Weight 6.3 [kg] 10 million maintenance free cycles, Positioning 2 positions, e ...

Injection unit Krauss Maffei size 700 complete with screw cylinder 50 mm Ã?, complete with all valves and servo motor

Blocking unit Built in 1999; working condition

Built in: 2004 Rebuilt: 2017 Equipment: stitching unit for Ferag UniDrum; working condition

Swivel unit, OSE-A45-8, Schunk, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Built: 1998 Dimensions: 1.15 m x 0.8 m x 2.5 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Umluf fan: 8,000 m3/h; 4.0 kW; 1435 rpm Location : Warehouse Room Herzogenaurach Sales price: € 2,990,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Angular swivel unit, Accuracy 0.01°, SF100-90D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swivel angle 90 [°] Torque 15 [Nm] Energy transmission pneumatic 4 [number] Swivel angle adjustable +/- 3 [°] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Repeatability +/- 0.01 [°] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Nominal operating pressure 6 [bar] Operating temperature min. 5 [°C] Operating temperature max. + ...

Qty. 1 Second-hand laser tube wall thickness measurement unit Mfc.: MSG Maschinenbau GmbH Built: 2009 Determination of wall thickness using laser technology. Max. loupe dia.: 85 mm (can be modified) Wall thickness: 11 – 14 mm Loupe length: 250 – 600 mm Operation speed: 1.3 m/sec. Power: 6.5 kW, 400 V, 21 Amps., 50 Hz Air pressure: 6.0 bar Scope of supply: Removal device Feeder Saw inlet channel Vertical drivers Vertical & horizontal straightener Heavy-duty metal circular saw Blow-out and suction device Weighing device (calculation) Catchments Loupe crane Suction unit Hydraulic aggregat Collection stand

Year of construction : 1983 / 2003 Oven and burner renewed Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air fan: 8,000 m3/h; 4.0 kW; 1500 rpm Location : Camp Herzogenaurach Sales price: € 2,900,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

1 unit 2 buckles + 1 unit 2 buckles

Upright stack delivery with pressing unit; working condition

Used respirator AVT, type: PSH 3/3 - rust and aircraft stainless steel (1.4404) - ventilation unit with sight glass - seals with clamps - filter candles 3 x 30 ' maximum height 750 mm - operating pressure 0-10 bar - operating temperature 0-150 ° C - connections NW 4 0 - feet height adjustable - height instrument gauge 1,325 mm -Operating pressure 0-10 bar Inspection and test run are possible by arrangement like.

Control unit CU320-2 PN. SINAMICS, 6SL3040-1MA01-0AA0, Siemens, mint condition Special price Attention: Original Siemens product, no replica from.. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Control Unit CU320-2 PN, SINAMICS, 6SL3040-1MA01-0AA0, Siemens, - Digital Outputs 24VDC 0,5A - incl. SINAMICS Control Panel 6SL3055-0AA00-4BA0, Siemens, - incl. SINAMICS S120 Compact flash card, Performance 1, 6SL3054-0FC01-1BA0-Z, Siemens, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in  ...

Filter system 14 x 5 filter L x W x H: 3000 x 1280 x 2100 mm With Shaker Built in 1979 Weight 430 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Linear unit, stroke 1028mm, RK Monoline Z 60, RK Rose+Krieger, used Top Used - top condition like a demonstration unit The part was removed from a pilot system that was only used for a short time and is in almost new condition. Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € 1980 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Technical data: - Linear unit RK Monline Z 60, with toothed belt drive, RK Rose+Krieger, - Incl. 2 tables 187 x 140mm, table 1 is driven, table 2 is freely movable - the 2nd table can be removed - Max. stroke when using one table = 1028mm - Variable positioning of the drive - Connection linear unit - Gearbox with backlash-free Rotex KTR claw coupling GS24 ...

Cross slide unit with 2 spindles, for conversions or adaptations

Spindle unit, for conversions etc - see picture

Feed-slide unit with multi-spindle boring head and turning unit, for conversions and adaptations

N & P (NUMBERING & PERFORATING) UNIT FOR OFFSET PRINTING MACHINE HB GTO 46 + Format (cm): 32x46 All existing tools will be included with the device for punching and perforating as well as holders of these tools (see pictures)

Make: KÜBA Type: SGK 153 Slats distance 10mm Length: 4200mm Volume: 161.20 l Power approx.80KW at minus 40C foldable with insulated drip fir with 3 fans WOODS, total power 6300 watts for shock frost 2 pieces available Info: 0043-6641838175 or info@frigocom.at Price on request

Hydraulic agregate with Bob and cooling, engine made in Swden 55kW, cubic capacity 300 dm per min, pressure 31,5 MPa, transport weight ca. 800kg. Ready for work.

For DMG HSC 75

For sale: USED Diane XT HMI Control Panels , 1 x PP250 & 1x PP450, USED and in good working condition email for photos and price Ex-Stock UK

for Mechanics: IRB6600/6640 Control: IRC5 M2004 Year of construction: 2011 Condition: used spare parts carrier Accessories: No accessory. Including: DSQC 668 DSQC 663 DSQC 627

Mobile strech bander suitable for grouping + banding of folding boxes asn. Output: up to 40 bundles / min. PLC: Siemens S5.

Equipment / Additional information: JEWA Flexo Rotonir SM52: M.No.: 02010-0017 BALDWIN: Typ: FK-1-500 // Serien No.: 151166 // Art.- No: 150.01.0001

Shock evaporator, TK evaporator ECO 54B12, with 4 fans, Y.O.M. 2013 with 12 mm slats for shock.with defrosting heating. Power in KW 45.

Trilo SU 60 and SU 40 leaves and grass loading blowers on 1-axis chassis 80 km/h with road approval (ABE), equipped with Honda gasoline engine or hydraulic drive motor, 4-5 m long suction hose with hand socket for effective work handling. Further loading blowers are also available for attaching to the vehicle board or suction containers with integrated turbine in various sizes and variants. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

We offer a generator set in a container with DEUTZ (MWM) engine - TBG 616 V12K. Engine is completely overhauled. Electrical power - 450 kW Built - 2001 Engine hours - approx. 63000 Bh Control - a new (approx. 2000 Bh) - Deif The complete CHP can be prepared and delivered at short notice. Without unit certificate!

Coolant storage device consisting of metal tank (tank size: 16 litres), coolant pump, hoses and fitting.

Good working conditions

Good working conditions

Refrigeration unit Bitzer LH104 2CC-4.2Y-40S

Emolsion vacuum cleaner Make: Ringler Type: RI 502-D 4 kW 2895 rpm 400V, 50 Hz with suction hose, and various inserts Condition: barved, but functional Only to traders is sold. All information without guarantee

Good working conditions

7.5 KW

Rittal PS 4806 Modular enclosure Product Modular system PS 4000 Manufacturer: Rittal Clamping system: PS 4000 Model No.: PS 4806 Housing frame: sheet steel 1.5 mm Roof: sheet steel 1.5 mm Door: Sheet steel 2.0 mm Rear panel: sheet steel 1.5 mm Mounting plate: sheet steel with zinc coating 3.0 mm Floor plates: sheet steel 1.5 mm Housing frame: dip primed Door, roof and rear wall: dip-primed Powder-coated exterior, textured paint Colour: RAL 7035 4 transport eyelets Wiring diagram pocket made of sheet steel 4118000 Swivel frame, large 19" 44 U Plinth system as a stable cabinet base Control cabinet cooling unit SK 3296100 Dimensions (HxWxD) 2500 x 800 x 600 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

2 pieces available For more information, please refer to the enclosed photos.

Item nr.: 907572-0000 Counter Omron for Tetra Pak machines Omron high speed counter unit, C200H-CT001-V!

Machine Type: Water Circulation Cooling Unit Make Jäckle Type FKG 3 Connection for the welding machine 230 V Schuko coupling Connection voltage 1 x 230 Volt Power connection 230 V Schuko plug Water pressure 3 bar at 2.3 ltr./min. Cooling capacity 1,000 W Burner connection 2 quick-release couplings Water tank 5.4 ltr. Content Dimensions L x W x H 1,080 x 520 x 830 mm Weight 44 kg Age approx. 10 years Condition workshop tested incl. UVV protocol Warranty: 6 months from the date of delivery Original price €1,350.00 + VAT Your price €590.00 + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Straße 31 81249 Munich The contact person is Mr. Manuel Maier. Of course, we will ship the machine to you for 60,- € by freight forwarder thro ...

Tools of a groove drawing machine Stuhlmann With partial apparatus - residual stock tool Part apparatus of a groove drawing machine Stuhlmann, without tool cabinet! With residual stock of tools according to photos.

Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used Top Special price For your info - The current new discounted price of a similar product is € 1955 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse, was only used for a very short time and is in very good condition. Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used-Top, consists of: - Standard cylinder DNC-125-PPV-A (current discounted new price € 419 excl. VAT) - Locking unit KPE-32 (current discounted new price € 1536 excl. VAT) - and a longer piston rod Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, wh ...

Grease separator sether boiler, Type: Easy Clean Standard NS 4B completely cleaned and rinsed, grease-free and odourless. leakage test. A spout pump is included in the scope of delivery. New price was 8000,00â?¬ net. Deutschaland-wide shipping in German-speaking countries possible at an additional cost. Delivery: - Boiler grease separator Easy Clean Standard NS 4B - Sampling device DN100/150 horizontal - Spühl pump for grease separators

The used coolant cleaning system based on centrifuge is connected to a tool grinding machine (Anca, Rollomatic, Walter, Schneeberger, etc.) and supplies the grinding machine with clean emulsion or clean oil. The pure oil is pumped directly to the grinding machine by pumps placed on the coolant cleaning system. Advantages of this system: 1. Use with oil or emulsion no problem 2. Filtration without consumables with the centrifuge, 3. Use with tungsten carbide, ceramic or HSS no problem. 4. The sludge comes out of the centrifuge dry, with minimal residual moisture. Pump capacity of supply pump 1 (for process supply): up to 80 litres/min. at 5-7 bar Supply pump 2 (for spindle cooling) 20 litres/min. at 5 bar The contaminated oil runs back from the machine into the filtration system and is cleaned in the centrifuge. Stage 1: Filtration by a centrifuge, without consumables, the ...