tractor unit used for sale

Equipped with 1 shower; 220 Volt connection; lockable with key and knob cylinder; spoon holes; unused (Transport dimensions 1310x1100x2360, Weight 490KG) Auction-ID: A1-40105-267

Equipped with insulated walls and roof; 2 bedrooms; living room with corner kitchen; bathroom with shower, toilet and sink; each room equipped with lighting and sockets 230V; meter cupboard; PVC floor; aluminum windows and doors; lockable; water, electricity and drainage can be easily connected is prepared; unused and ready for transport (note furniture not included) (transport dimensions 590x220x248 cm, weight 3100 kg) Auction-ID: A1-40105-261

W.O.S. 40B vacuum unit. Capacity of 40m3 vacuum Features: Honda GX240 petrol engine Stelcon plates nap a 75 x 75 cm Lifting eye Spoon board cutout Auction-ID: A1-40135-266

An industrial vacuum dust collector Höcker is available. Suction diameter: 250mm, nominal volume flow: 4241m³/h, min. volume flow: 3534m³/h, motor power: 5.5kW, vacuum pressure: 2940Pa, weight: approx. 630kg. Documentation available. An on-site inspection is possible.

Air conditioning compact unit EES type WPWG -LL- 32, compact unit room air conditioner with remote control, 220 V, cooling capacity 3200 W, heating power 3200 W Auction-ID: A7-45960-50

S03-C Mason, 7,5KW, 380V, Pump : Rexroth 1PV2V3-30/40 RA01MC 63A1 , 1/80. Hydr. Block for 4 valves, 2 4/3 directional valves, elek. , tank approx. 170lt., dimensions; 95 x 60 x 80cm Possibly also with bending tool, bending cylinder! See photos. Other units on request! See photos!

For more specifications, see PDF. Auction-ID: A7-45828-1

S03- A ( 2pcs. ) BOSCH 3 pumps, 2xkonst. No. 1517222370 / 0510715004, 1 xadjustable. 2517300000 Vn=17cm3/U, 70bar; little used 4/a directional control valve R250 768, pressure regulator, 2 pressure gauges up to 100bar or up to 400bar, oil cooler, hydraulic accumulator, engine 5.5 kw, 1400rpm, oil level indicator. Tank approx. 60lt. Dimensions: Length : 100cm; Width : 55cm ; Height : 80cm; Weight: Price per piece Others on request !

S03- A ( 2pcs. ) BOSCH 3 pumps, 2xkonst. No. 1517222370 / 0510715004, 1 xadjustable. 2517300000 Vn=17cm3/U, 70bar; little used 4/a directional control valve R250 768, pressure regulator, 2 pressure gauges up to 100bar or up to 400bar, oil cooler, hydraulic accumulator, engine 5.5 kw, 1400rpm, oil level indicator. Tank approx. 60lt. Dimensions: Length : 100cm; Width : 55cm ; Height : 80cm; Weight: Price per piece Others on request !

Description Filter Hose for Alko Mobil Jet 140 to 300 Material: Polyester, BIA Cat: M, antistatic, Weight 460 g/m² We manufacture every filter size! Prices, delivery times and payment terms on request. Telephone advice at: 05656-9239404

Threading unit Suhner Tapmaster GEM 20, serial no.: 3132, as good as new, in original packaging with documents Auction-ID: A1-45977-229

Year of construction 18.11.2003 Factory No.: D 7489 Rated voltage 230V 50 Hz Temperature range 20 - 55° C Weight 13 kg. Auction-ID: A1-45977-32

Thread cutting unit Suhner Tapmaster, serial no.: 616466-00201 Auction-ID: A1-45977-227

Built-in control unit Type: BUS6-VC-EC-0016 Art. Item No.: 232691 Auction-ID: A1-45977-37

Thread cutting unit Suhner Tapmaster, serial no.: 623302-00101/12 Auction-ID: A1-45977-228

Factory No.: D 200739 Rated voltage 230V 50 Hz Total cooling capacity 1490 W Temperature range 20 - 55° C Year of construction 12/072012 Weight 30 kg Auction-ID: A1-45977-26

Transport width: 1050mm Length: 3x 1600mm Roll diameter: 90mm Chain drive via worm gear motor Auction-ID: A7-45983-58

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-45901-684

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-45901-677

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-45901-681

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-45901-679

Hinged window; Desk; cabinets; Floor; Lighting; Fuse box; 230V; 3 sockets with USB connection; insulated; aluminum frame; lockable inside and out; Auction-ID: A1-45901-1

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-45901-675

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-45901-683

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-45901-678

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-45901-682

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-45901-676

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-45901-680

The Filtrox Cross Flow microfilter works with a permissible transmembrane pressure of 6 bar (0 °C - 95 °C) and a filtrate volume of 4.5 - 7 hl/h with a filter surface area of 26.4 m². Two pumps (20 kW) in the unfiltrate circuit transport the medium to be filtered. With 16 hl agitator tank as cleaning tank., Additional title: membrane filtration plant for yeast-beer recovery 1987-1991, Capacity: 7 hl/h, Tol. operating pressure: 10 bar, Tol. operating temperature: 85 °C, Max. filter area: 26 m^2, Current: 4,85/2,8 A, Voltage: 220/380 V, Frequency: 50 Hz, Operation / Control: Simatic S5, Features: 8 ceramic membrane modules (total filtration area 26.4 m2); high-pressure pump; 16 hl cleaning tank with agitator; various pipes, valves, measurement and control technology

Matek Mix-Kult System for mixing ready-made syrup with water or mixing several components. The system is mounted on a base frame. The individual units are easily accessible and can be observed as they work. All necessary fittings, control and display devices as well as the control cabinet are installed. The mixing plant is fully automatic. Syrup and water are dosed in a predetermined ratio, mixed evenly, deaerated and impregnated. The finished beverage is stored in the beverage tank, from which it is then optionally piped to the filler via a pressure booster pump., Additional title: Inline mixing unit, Capacity: 80 hl/h, Operating pressure: 10 bar, Volume: 555 l, Power: 10 kW, Water: 2,5 atm, Compressed air: 5 atm, Length: 1900 mm, Width: 900 mm, Height: 2300 mm, Weight: 1000 kg, Material: Stainless steel, Base construction: Frame, Features: Mixing and dosing vessel; beverage tank; Mohno ...

This used keg filling system from m + f KEG-Technik GmbH & Co. KG (built in 1989) is a reliable solution for cleaning and filling kegs with a capacity of up to 30 kegs per hour. The machine is equipped with two heads for filling and cleaning as well as two CIP tanks, ensuring efficient and consistent operation. It supports flat and basket formats and is controlled via Siemens S5. Thanks to its robust construction and compact design, this system is ideal for breweries or beverage manufacturers looking for a proven and cost-effective solution. Our team at VBW Asset Trade will be happy to answer your questions., Capacity: 30 Keg/h , Pressure: 5 bar, Length: 2,40 m, Width: 1,90 m, Height: 2,10 m, Weight: 400 kg, Formats: flat- and basket-fitting, Operation / Control: Siemens S5, Features: 2 heads (both filling and cleaning), 2 CIP- vessels

Volume-dependent dual system, Additional title: Separator, condenser and control cabinet from 2010, Features: 1 NH3-separator, 2 cooling compressors, 1 evaporative condensor, 1 control cabinet

The ventilation system was used to extract kitchen exhaust air. The system is weatherproof and can therefore also be installed outdoors., Additional title: Fan for air exchange, Flow capacity: 20000 m³/h, External compression: 600 Pa Total compression: 734 Pa, Fan revolution: 1160 1/min, Noise level next to the unit: 58 dB(A) in 1 m distance, Power: 5,82 kW (inkl. Frequency converter), Motor 7,5 kW, Current: Motor-electric power 16,01 A, Voltage: Motor-Voltage 3 x 400 V, Frequency: 53 Hz, Length: approx. 4070 mm, Width: approx. 1630 mm, Height: approx. 1810 mm, Weight: 1200 kg, Operation / Control: controlled via wall mounted cabinet with integrated controllers, Material: Stainless steel cabinet, Features: Fan (free spinning wheel), Frequency controller, electrical cabinet, bird protection (780 x 780)

2 KSB centrifugal pumps with frequency control from the ice water circuit of a refrigeration system. Capacity: 2 x 15 m³/h at 2 bar, Additional title: centrifugal pumps, Delivery rate: 15 m³/h, Delivery pressure: 2 bar delivery head 20 m, Running direction: clockwise

Additional title: Control cabinet with touch panel, Voltage: 110-240 V AC, Frequency: 50-60 Hz, Length: 500 mm, Width: 580 mm, Height: 210 mm, Weight: 35 kg, Operation / Control: touchpanel

Additional title: 4 container CIP, Capacity per tank: 3000 l , Number of tank: 4 pieces , Width: 1,3 m, Height: 3,4 m, Weight: 500 kg, Position: vertical, Features: Pressureless tanks, 3 tanks, every with 30 hl, d = 1,2 m, h = 2,8 m,1 tank with 25 hl for fresh water, d = 1,2 m, h = 2,2 m, feeding in of water of the main

A continuous-flow washout machine Glunz & Jensen for washing out and simultaneous gumming of chemistry-free offset printing plates is available. Brushes: 2, max. working width: 851mm, min. plate width: 231mm, min. plate length: 300mm, max. plate length: 1100mm, plate thickness range: 0.15mm-0.3mm. Machine dimensions X/Y/Z: approx. 1400mm/700mm/1100mm, weight: approx. 130kg. The machine has been cleaned, dismantled and is stored in a dry warehouse. Documentation available. An on-site inspection is possible.

Type - HKV Manufacturer - Ludden & Mennekes Year of manufacture - 2019 Fits 4-wheel MGB flat-top trailers Stationary EXW Vilnius - 5100 EURO

Input line L 6200mmxW385mmxH920mm; Output line L12200mmxB1280mmxH950mm; push-off unit L1450mmxB1800mmxH650mm Auction-ID: A1-43429-28

JUNG magnetic chuck / magnetic clamping plate for holding steel workpieces during machining, typically on a surface grinder. The set includes an external control unit in a red housing. The chuck is equipped with an EIN / AUS (ON / OFF) switch. The control unit features a viewing window with scale/indicator and an adjustment knob. Complete set, ready for connection. Main features / parameters: • Manufacturer: JUNG • Type: magnetic chuck / magnetic clamping plate for grinder + control unit • Functions: ON / OFF (EIN / AUS), external control unit Auction-ID: A7-46285-13

5 linked office units HWK020-080 HWK020-102 HWK020-082 HWK020-127 HWK020-128 Auction-ID: A3-43519-20939

Grid size: 2500x1000mm, working height: 1020mm. Equipped with: (2x) drawers. Auction-ID: A1-43429-56

Bitzer Kühlmaschinenbau GmbH condensing unit, type: LHV7E/4EE-6.F1Y-40S, serial number: 1604211107, Bitzer Kühlmaschinenbau GmbH cooling compressor, type: 4EE-6.F1Y-40S, capacity: 22.7/27.4 m³ per hour, dimensions: 1350 mm x 700 mm x 1700 mm. Never used.

Bitzer Kühlmaschinenbau GmbH condensing unit, type: LHV7E/4EE-6.F1Y-40S, serial number: 1604207723, Bitzer Kühlmaschinenbau GmbH cooling compressor, type: 4EE-6.F1Y-40S, capacity: 22.7/27.4 m³ per hour, dimensions: 1350 mm x 700 mm x 1700 mm. Never used.

Bitzer Kühlmaschinenbau GmbH condensing unit, type: LHV7E/4FE-5.F1Y-40S, serial number: 1603113853, Bitzer Kühlmaschinenbau GmbH cooling compressor, type: 4FE-5.F1Y-40S, capacity: 18.1/21.8 m³ per hour, dimensions: 1350 mm x 700 mm x 1700 mm. Never used.

Equipped with: demountable camper body / expedition camper box (demountable camper unit), 2 person bed conversion, 6 windows, skylight, kitchenette with sink, 4 gas burners, fridge with freezer compartment, bathroom with sink and shower, storage compartments, inverter to 220v, kilswitch, 2 water tanks, space for 2 spare wheels, Auction-ID: A1-40136-18

Unused, spoon holes, toilet and sink, shower with sliding wall Auction-ID: A1-40106-46

Good condition Auction-ID: A7-46327-146

liter capacity:21 l/min Pressure of coolant:50 bar rated current:20 A Clean water tank capacity:300 l total power requirement:16 kW weight of the machine ca.:200 Kg dimensions of the machine ca.:1,2 x 0,8 x 1,4 m We are importers for FRASCARA high pressure coolant systems Frascara delivers compact, mobile and reliable high pressure coolant / filtering systems with 50 or 70 bar 21 l/min. We can provide up to 3 pressure levels controlled by M-Functions. Oil operated systems are available also. Areas of application: Cleaning of coolant lubricants, emulsions and cutting oils without filter residues. Installation on machine tools for individual machines Function: The lifting pump inside the machine tank with minimum 2bar / 20 l/min capacity presses the contaminated water through the twin filter unit into the clean water tank. of the Frascara unit, from where it is pumped back through the spin ...

total power requirement:413 kW Induction hardening machine Rotary table Eldec: Z (servo drive 750 mm Y (electromechanical) 300 mm X (electromechanical) 200 mm Maximum part diameter 600 mm Maximum workpiece weight 500 kg High frequency generator type HFG 200 Medium frequency generator type MFG 30