tractor unit used for sale

GRASO PK030 shrink wrapping machine with GRASO TGW 30/80 heat shrink tunnel was manufactured in Poland in 2014 by Graso. The device, due to its versatility and advanced technology, optimises the process of packaging various types of products in unit packs as well as collective packages. Packaging made of heat shrink film effectively protects products from external factors, while enhancing their aesthetic qualities at the same time. The GRASO PK 030 packing machine has a large working area and a knurled bar, which guarantees excellent sealing quality. After sealing, a roller conveyor transports the product to the heating tunnel, where the film shrinking process takes place. After exiting the heating chamber, the finished pack is cooled by fans. The GRASO TGW heat shrink tunnel, in turn, is equipped with a control box, heaters with heat sinks and adjustable airflow by means of adjustabl ...

Maintenance unit, three-piece MARTONAIR, NORGREN M8B-A68-B39D R15-000-RNL0 F15-000-M3H0 L15-000-0P90 G 1 1/4 0.4 - 8 bar New !' Dimensions: 450 x 280 x 145 mm

Dividing head DECKEL Center height 90 mm Spindle Passage in Pull Tube 25 mm Gear ratio 40 : 1 Weight approx. 41 kg

Threading unit Suhner Tapmaster GEM 20, serial no.: 3132, as good as new, in original packaging with documents

For more specifications, see PDF.

For more specifications, see PDF.

2017, machines have been put away working and have had annual inspections

With accessories in wooden box.

Maintenance unit, maintenance device combination FESTO LFR-D-DI-MAXI LFR-1/2-D-DI-MAXI-KF 192445 G 1/2 12 bar used, tested ! Dimensions: 360 x 290 x 125 mm

2015, machines have been put away working and have had annual inspections

CNC unit for corner notching in off-set design Brand: Atemag Type: Function Line Extra 2 Max drive speed 8,000 R.P.M. Max. tool spindle speed 12,000 R.P.M. Gear ratio i = 1:1,48 Turning direction left/right Torque max. 20 Nm Tool interface: Special Attention: price is just valid for standard version

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Vario Viso With adjustable angle 0 - 100° Max. drive speed 15,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 15 Nm Tool interfaces: combination ER 25 and saw, saw blade flange 30 mm Version with one single clamping screw, locking with the lever

Maintenance unit with pressure switch REXROTH 3 x 0 821 100 023 2 x 0 821 300 306 1 x 0 821 302 515 4 x 0 821 300 920 1 x 0 821 300 264 0,0,0 5 - 16 bar used, Accessories for AGIE CUT 300 ! Dimensions: 340 x 250 x 100 mm

CNC unit with oscillating cutter head Brand: Atemag Type: Function Line Soft Cutter Pro Max. drive speed 6.000 R.P.M Max. tool spindle speed 9.000 R.P.M. (Frequency 150Hz) Gear ratio i = 1:1,48 Torque max. 8Nm Amplitude: 4mm

CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Mono With one tool interface, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 22 Nm Tool interfaces: ER 25, ER 32, saw blade flange 30 mm, dia. max. 300 mm We recommend with saw blade or for heavy duty rough milling a gear reduction: Type MONO, version R Max. drive speed 12,000 R.P.M. Max. tool spindle speed 8,000 R.P.M. Gear Ratio i = 1:0,676 Torque max. 22 Nm

CNC unit for boring, routing and sawing Brand: Atemag Type: Vario Classic With one tool interface, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St G K04/0412 Nominal pressure: 1 MPa (10 bar) Nominal diameter: 6 mm Wegevenil ORSTA 6-0.0 1 TGL 20705 ED 100 24 V DC used, tested ! Dimensions: 230 x 130 x 180 mm

Height 1750 mm Width 1260 mm Length 2380 mm Power supply: 400V 50Hz 3N Description The machine is adapted to transport shredded dry industrial materials.

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St G K04/0410 Nominal pressure: 10 kp/cm² (10 bar) Nominal diameter: 6 mm Wegevenil ORSTA 6-0.1 TGL 20705 ED 100 220 V AC used, tested ! Dimensions: 230 x 130 x 170 mm

impressions: 44 Mio. max. printing speed sheets: 8000 /h max. paper size: 32x46 cm numbering unit: include The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multispindle drilling head unit for cnc working centres Make: ATEMAG Multispindle drilling head for economical drilling of numerous holes or complex hole patterns in just one machining stroke. Max. drive speed: 10.000 Rpm Max. tool spindle speed: 10.000 Rpm Gear ratio i= 1:1 Torque: max 1-5 Nm Number of tool output: on request

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St GK 04/0400 Nominal pressure: 10 kp/cm² (10 bar) Nominal diameter: 6 mm hand levervenil ORSTA 6-0.1 TGL 20705 used, tested !' Dimensions: 240 x 130 x 240 mm

(processless) (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Ser. No.: PJ000016 // Typ: PJ.003.0000 Throughput: up to 11 plates/hour (depending on the plate type used) Format (cm): 52 & 74 with software license for both formats Plate formats (H x W): from 240 x 240 mm up to 670 x 750 mm Plate thickness: 0.15 mm - 0.30 mm Resolution: 2540 dpi, max. 300 lpi, AM and FM screening Material counter: 26298.03 m2 Plate counter: 81600 pieces Exposure counter: 81322 pieces Total material used: 27988.8 m2 Total of all plates: 86417 pieces Total of all exposures: 86220 pieces Total of all punches: 86524 pieces Total of switch-on time: 85165.82 hours Total of exposure time: 3053.96 hours Equipment / Additional information: Plate stacker, advand PST 26 integrated single cassette loader, fully automatic plate loading/unloading unit with automatic intermediate paper removal, exte ...

Circulation pump, centrifugal pump, water pump, chemical pump KSB ETALINE GN40-160/902 Ausf. GN6, CD4090 with control unit VarioDrive Type:30FV1 DN60 380 V very good condition Dimensions: 680 x 310 x 470 mm

NEW 10x Sandvik Coromant Inserts R390-170408M-PM 1030 Area of application of the plates: P and M

CNC unit for boring and routing Brand: Atemag Type: Function Line Quattro With four tool interfaces 2x boring / 2x routing Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 25, ER 32

CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch One With surface copying function with fix spindle ER25 and fix bell Max. drive speed 18,000 R.P.M. Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 10Nm Tool interface: fix ER25 Adjustment distance: 70mm

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular

Flow meter with display unit ACS, ENDRESS+HAUSER PROMAG 33A 33AT04-FD1BA41A22A DN04 1.4404 PN40 IP67 flange Ø 95 mm The two devices are not wired together ! S364 and EL249 combined ! Dimensions: 330 x 260 x 240 mm

Underfloor drilling unit suitable for IMA - incompatible with a Weeke plug

Control cabinet cooling unit, control cabinet cooling unit RITTAL TOP THERM PLUS SK 3303500 suitable for PC cabinet EL407 ! 20°C to 55°C 230 V used ! Dimensions: 280 x 230 x 550 mm

Key data: 160 mm, 2 kW, 1770 m³/h

mobile chip extraction system AL-KO FMRG 1/160 Manufacturer Part Number: 4172370/2

Control cabinet cooling unit, control cabinet cooling unit MCLEAN MIDWEST SLIMBOY 28-0626-G005 Useful cooling capacity: 1582 / 1758 W 230 V 60 Hz used, tested ! Dimensions: 990 x 250 x 730 mm

For sale is a used Nordson Problue 10 hot melt machine

For sale is a used Nordson Problue 4 hot melt machine. Various application heads as well as hot glue hoses (new and used are available)

Load cell with connection unit, force transducer, load cell PROMESS 20002 10900/4 measuring range: 1 kN cable length approx. 0.6 m used, tested ! Dimension(Sensor): 40 x 40 x 32 mm Dimension(Connection Unit): 160 x 95 x 42 mm

2-Stage-Reverse Osmose System. Capacity: 27.000 liter/hour. See documents for technical description, component list and 3D drawings.

Housing Unit, Three-Hole Flange Bearing Housing Unit, Flange Bearing INA PCFTRY 35, PCFTR35 2pcs ! housing: CFTR07 insert bearing: GAY 35-NPP-B Shaft diameter: Ø 35 mm Dimensions (single bearing): 145 x 128 x 45 mm New !' Dimensions (Packing): 145 x 130 x 90 mm

IMA milling unit - several milling motors immediately available from stock - price on request, depending on equipment and condition

Housing Unit, Four Hole Flange Bearing Housing Unit, Flange Bearing NTN UCF216D1 2 pieces ! insert bearing: UC216 shaft diameter: Ø 80 mm Dimensions (single bearing): 208 x 208 x 85 mm New !' Dimensions (package): 145 x 130 x 90 mm

Exchange units for contour milling HOMAG

Housing Unit, Four Hole Flange Bearing Housing Unit, Flange Bearing PAGUS UCF216 2 pieces ! insert bearing: UC216 shaft diameter: Ø 80 mm Dimensions (single bearing): 208 x 208 x 85 mm New ! Dimensions (packaging): 145 x 130 x 90 mm

Profile sanding unit IMA Type: 08.063

Housing Unit, Two-Hole Flange Bearing Housing Unit, Flange Bearing INA PCJT 30 10pcs ! housing: 01CJT08 insert bearing: GYE 30 KLLB-C FA115 shaft diameter: Ø 30 mm Dimensions (single bearing): 142 x 80 x 42 mm New ! Dimensions (Packing): 400 x 150 x 90 mm

Sanding unit IMA Type: 08.062 - oscillating