trac used for sale

TECHNICAL SPECIFICATIONS Manufacturer: SBM Basic Construction / SANDVIK Crusher Designation: Crawler mobile pre-crushing system Version: With SANDVIK double roller crusher Year of construction: 2016 Throughput: 1,000 t/h Total weight: 230,000 kg Operating mode: Hand/Automatic Mains voltage: 3400 V (AC), main switch 1000A Controller: - Control cabinet with enclosure - Incl. control with visualization - Incl. error display with operator panel COMPOSED OF 1) Feed bunker Dimensions (LxW): approx. 4.5 x 6.0 m Content: approx. 30 cbm 2) Record tape Type: PA 18 x 9.5 m Version: with crawler chain Plate width: 1,800 mm Plate tape length: 9.5 m Drive power: 90.0 kW (2 x 45.0 kW) 3) SANDVIK Double Roller Crusher Type: Hybrid CR810/12-20 Roll diameter: 1,200 mm Roll length: 2,000 mm Drive power: 2 x 200 kW (direct drive) Throughput: 1,000 - 1,200 t/h Total weight ...

ORDER NO. 6591 TECHNICAL DATA - track width 450mm - shaft width 450mm - disc bore diameter 80mm - shaft diameter 60mm - min dial diameter 300mm - max dial diameter 400mm - max cutting height 250mm - max width of input material 860mm - min length of the workpiece 800mm in advance: - repellers - pulling shaft, metal pressed pneumatically - repellers - pulling shaft, metal, pneumatically pressed - pressure - shaft with saws - pressure - 2 pulling shafts, metal pressed pneumatically bottom: - metal roller, slip roller - guide - repellers - caterpillar - shaft with saws - caterpillar - smooth adjustment of the feed speed on the inverter 4-40m/min - main motors 2x75kW - feed motor about 3kW - electric body lift up/down 0.55kW - electric shaft adjustment with saws 2×0.18kW - central lubrication - diameter of the extraction connection 2x300mm  ...

Epson G10-854SR Robot Screwdriving Station Dosing Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is designed as a closed aluminium frame with a steel welding frame inserted and has a very compact design. The control cabinets and valve terminals are integrated into the system. All movement processes during the operation of the system can be tracked on all sides through large windows and doors. Operation is via a touch screen. The assembly station is divided into substations 3.1 dosing area, 3.2 assembly area KK+SW and 3.3 mounting area front. (KK=heat sink, SW=bulkhead angle) The work steps according to these assembly areas are described below: St.3.1: Dosing range - a WT with attached chassis and printed circuit boards enters the dosing area via the transfer belt. - this is stopped at the stroke positioning ...

Unscrambler,Fleximatic,6 tracks,with exit conveyor.

Alu. seal and lid machine,mounted on 2-track conveyor

Lamella conveyor,stainless steel,3 tracks of 83 mm,L 2800 mm.

Band voveyor,double track,W 2 of 85 x L 1470 mm

pressure: 160 t no. of strokes: 40 - 120 Hub/min sheet width: mm total power requirement: 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubr ...

Roche MagNA Pure LC Nucleic Acid Preparation Station Manufacturer's description, all information without guarantee. Performances Save time with fast, fully automated isolation of high-quality DNA, RNA and mRNA. Get reliable, reproducible results. Benefit from high flexibility in sample type and volume as well as elution volume and post-elution processes. Benefit from the software-supported setup of reagents and disposable items. Automated pipetting of PCRs into LightCycler ® capillaries (LightCycler ® sample carousels), LightCycler ® 480 multiwell plates (96-well), PCR plates or strips or tubes. Product The MagNA Pure LC instrument is a benchtop device for fast, cross-contamination-free nucleic acid preparation and PCR setup. A fully enclosed housing, automatic clot and tip loss detection, and sample tracking make the MagNA Pure LC instrument a true "walk-away" instrument ...

properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 1,200 mm Total width incl. motor: : 660 mm Total width without motor: : 500 mm Belt width: 400 mm Strap type: lentsrillen/ black Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of ...

grinding height: 50 mm grinding width: 120 mm grinding wheel diameter: 600 mm total power requirement: 85 kW weight of the machine ca.: 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _______________________________________________________ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grin ...

workpiece length: 6300 mm swing dia.: 800 mm clamping length: 6300 mm grinding diameter: 800 mm grinding length: 1660-6300 mm grinding wheel dia. x width: 1500 x 150 x 650 mm grinding spindle speed: 250 - 500 U/min work piece spindle speed: 0,1-10 / 1 - 15 U/min table - swivable +/-: ° table speeds: m/min max. workpiece weight between centres: 5000 kg grinding motor: 18,5 / 22 kW control: FANUC 31i A5 clamping diameter: 200 - 600 mm diameter of main spindle: 280 mm tailstock quill diameter: 240 mm tailstock adjustment: 90 mm feed in x - axis: 0,01 - 10000 mm/min feed range Z-direction: 1 - 6000 mm/min z-axis: 7750 mm x-axis: 650 mm bed width: 2300 mm bed track: 4 total power requirement: kW weight of the machine ca.: 55 t dimensions of the machine ca.: 16,5 x 5,5 x 2,3 m Namely automatic clamping, automatic gear shifting, automatic slightly loosening, automatic servo indexing, automatic ...

Sychron motor with ball screw, MDD115C-N-015-N2M-130GB2, Rexroth, mint condition Special price High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new with traces of storage! The assembled linear actuator comes from a spare parts store of a mechanical processing. Year of manufacture 2008. The parts are as good as new, but have minor storage traces. Technical data: 1 complete linear actuator, 119x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB2, R911262637, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 55kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.319/10.50.353.591 T3, D50mm, total length of the screw approx. 591mm, thread  ...

max. wheel diameter: 400 mm gear width: 0 mm module: pinion diameter - max.: 254 mm axial cross angle: 90 ° total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal. The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is loaded with a preset torque. The axial pinion position can be adjusted until the quietest meshing position of the traction flank is found. Likewise, the thrust flank can be tested during the return run. Marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen. Working cycles, as well as the positioning in the tooth gap, are automat ...

pressure: 100 t passage width: . mm stroke: . mm tracking travel: 45 mm safety distance: 208 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mm turning diameter over slide rest: 220 mm turning length: 600 mm turning diameter in the gap: 320 mm turning speeds: 60 - 1650 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 1,1 kW weight of the machine ca.: 340 Kg dimensions of the machine ca.: 1,4 x 0,75 x 0,7 m Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sychron motor with ball screw, MDD115C-N-015-N2M-130GB0, Rexroth, mint condition Special price ! High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue an invoice without VAT As good as new with small traces of storage! The assembled linear actuator comes from a spare parts warehouse of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor traces of storage. Technical data: 1 complete linear actuator,181x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB0, R911262636, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 52kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.339/10.63.1033.1276 P3, D63mm, total length of the screw approx. 1276mm ...

Sychron motor with ball screw, MDD115C-N-015-N2M-130GB0, Rexroth, mint condition Special price ! High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue an invoice without VAT As good as new with minor traces of storage! The assembled linear actuator comes from a spare parts warehouse of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor traces of storage. Technical data: 1 complete linear actuator, 181x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB0, R911262636, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 52kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc. ball screw 1516.339/10.63.1033.1276 P3, Fa. Steinmeyer, D63mm, total length of the screw ap ...

length: 3000 mm Wheel width: 500 ( 450 ) mm work height max.: 880 (+/- 60) mm Description: - 3000 mm roller and measuring track type Exakt A standard - with digital position indicator el. connection 230 V 50 HZ with power pack - Display in mm display (measuring range: +/- 0.5 mm on 1,000 mm) - Measuring stop can be adjusted from the workplace by means of a hand wheel - with pneumatic brake for fixing the dimensions. - Stable material stop trolley, 12 ball bearings - on a large guide profile. - The stop is adjustable and can be folded back manually. - Basic version of roller and measuring track - in stable steel construction, all versions are stationary - The max.measuring length is the track length minus 450 mm - Ball-bearing support rollers Ø 60 x 2 mm - Galvanized conveyor roller with axis Ø 15 mm - Load capacity per meter of roller conveyor approx. 300 kg - Roller pitch 250 mm - Web ...

length: 2.000 mm height: ca. 660 - 815 mm width: 600 mm Furnishing : - stable construction - high load-stable stability - Height-adjustable feet techn. Details: - Track length: 2,000 mm - Roll width: 600 mm - Height: approx. 660-815 mm - Distance between the rollers: approx. 160 mm - Height adjustable: yes - Number of rolls: 8 pieces - Roll diameter Ø 90 mm - color blue / red The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3.000 mm height: ca. 660 - 815 mm mm width: 600 mm Furnishing : - stable construction - high load-stable stability - Height-adjustable feet techn. Details: - Track length: 3,000 mm - Roll width: 600 mm - Height: approx. 660-815 mm - Distance between the rollers: approx. 160 mm - Height adjustable: yes - Number of rolls: 12 pieces - Roll diameter Ø 90 mm - color blue / red The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sychron motor with ball screw, MDD115C-N-015-N2M-130GB2, Rexroth, mint condition Special price High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new with traces of storage! The assembled linear actuator comes from a spare parts store of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor storage traces. Technical data: 1 complete linear actuator, 169x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB2, R911262637, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 55kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.310/10.63.848.1091 P3 D63mm, total length of the screw approx. 1090mm, thread ...

Lifting height: 2000 mm weight max.: 22 - 32 kg. weight: 13,5 kg Description : - Safe hanging of device and supply line - in the weightless state. - constant traction - Tear-proof steel cable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sychron motor with ball screw, MDD112D-N-030-N2M-130GB2, Rexroth, mint condition Special price High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new with traces of storage! The assembled linear actuator comes from a spare parts store of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor storage traces. Technical data: 1 complete linear actuator, 185x26x28cm, ca. 250kg, consisting of: - 1 pc Sychnron motor MDD112D-N-030-N2M-130GB2, R911260224, from Rexroth, permanent magnet motor, max. 75Nm, 3000rpm, 62kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.78/10.80.910.1189 P3 D80mm, total length of the screw approx. 1189mm, thread  ...

pulling capacity: 32 kN : 20 m : 16 mm winch traction in steel case, as good as new pulling power with lever pipe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4070 mm y-travel: 1185 mm z-travel: 1985 mm total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: 6000 x 4500 x 4000 m Consisting of: Working Range: Measuring column, longitudinal movement, X Axis 4,070 mm Measuring slide, cross, as Y Axis (measuring head) 1,185 mm Measuring slide, vertical, as Z Axis (vertical) 1,985 mm Adjustment of measuring head, roll axis 360 ° pitch axis 220 ° Measuring table 5,000 x 2,000 mm Weight, approx. 15,000 kg Space required 6,000 x 4,500 x 4,000 mm Accessories / Special Features : o 3D tracer head, with turning/swivelling device. o Universal 3D Measuring Software, KOROS CAD 5.2.0 from November 2001 (with lots of enhancements), as well as HOLOS UX for manual or automatic measuring of all geometric elements and free-form surfaces, ideally on passenger car bodies, engineering parts and  ...

S39 - used approx. 60 m³ / 60,000 ltr double-walled steel tank, heating oil tank, water tank, fire fighting tank, water cistern. technical details: capacity: approx. 60 m³ / 60,000 ltr material: steel tank, double-walled, DIN 6616D/6601 manufacturer: Dehoust year of construction: 2007 factory no.: 17/07512 weight: approx. 11 t dimensions: Ø approx. 2.90 m × L approx. 9.52 m × total H approx. 3.30 m Other: Used, in good condition, above-ground storage tank, steel tank on 2 steel bases attached to the tank, former heating oil tank, lid and connections on top of the tank body. The container has been emptied and professionally cleaned inside. According to age, traces of use are present. The container can be used as a storage tank for water and many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your d ...

– German production –Ce – Quickfix disc shifting system – year of manufacture 2010 TECHNICAL PARAMETERS: cutting height 110 mm cutting width 340 mm engine power 22 kW feed adjustable on the inverter electric shaft height adjustment electric pressure height adjustment Spindle in Quickfix system (possibility to change the dimension without the need for tools) the diameter of the traczy max. 350 mm spindle diameter 65 mm sleeve diameter 80 mm four upper pressure rollers four rows of anti-jet latches shoe for short elements .max. element width 700 mm Min. element length 300 mm central lubrication connection diameter 250 mm ruler machine dimensions (L/W/H) 190 / 85 / 165 cm weight 1800 kg

Workpiece diameter: 0 mm Workpiece length: 0 mm Technical data Table size: Length: 800 mm Width: 550 mm Height between table and tracer: 700 mm Machine´s weight about: 1050 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 2400 mm Various accessories: Tool cabinet Electrical measuring instrum. Printer

– Italian production – year of manufacture 1991 TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 45 and 45 kW engines feed motor 3 kW height adjustment motor 1,1 kW disc diameter max. 300 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm track width 350 mm total power 94 kW feed adjustment on the inverter automatic central lubrication minimum element length 600 mm electric height adjustment electric shaft height adjustment four upper pressure rollers pneumatic clamps five anti-ejection latches shaft position indicator connection diameter 2 x 220 mm spindle speed 4500 RPM dimensions of the machine (L/W/H) 240 / 235 / 210 cm weight ~ 6000 kg

continuous grilling line suitable for frying, cooking or browning electric heating 400 kW 510A, 3 x 400V, 50Hz with bottom and top band : bottom and top contact frying Overall dimensions (L x W x H) : ± 7,700 x 2,300 x 2,400 mm Cooking time: from 10 sec. to 5 min. Useful length 6,000 mm Track width 1,060 mm max 260 degrees product height 250 mm Air: 6 bar - 100 l/min Water: 65 degrees - 2 bar - 30 l /min variable frying height infinitely variable speed pneumatically controlled tape Siemens PLC control with belt washing system

– Italian production – year of production 2000 –DTR TECHNICAL PARAMETERS: track width 300 mm cutting height 120 mm engine power 25 kW .max. disc diameter 350 mm .max. element width 1000 mm Min. element length 400 mm feed adjustable on the inverter ruler on the right side pneumatically adjustable revolver scale setting 6 types three rows of anti-jet latches possibility of putting on a board - shoe spindle diameter 50 mm sleeve diameter 70 mm sleeve equipped with spacers automatic central lubrication four upper pressure shafts connection diameter 180 mm and 120 mm machine dimensions (L/W/H) 210 / 175 / 160 cm weight 1800 kg

completely stainless steel suitable thermo-oil heated (300 kW) 12 kW Frying length 7,500 mm Track width 600 mm Top band infinitely variable speed Oil pump Oil level control Suitable for fire protection Filter Dirt transport Lid mechanical lifting device insulated lid Dimensions (L x W x H) : ± 10,900 x 2,000 x 3,500 mm Siemens PLC control type S5 95U+ HMI Simatic OP27 suitable for CIP cleaning + Oil Management System Type VTC 2000 single-walled tank Oil pump Dimensions (L x W x H) : ± 1,700 x 1,1600 x 3,400 mm Oil level indicator

Immersion pump, MTR5-6/6 A-W-A-HUUV, 1,1 KW, 40m, 5,8m³/h, Grundfos, mint condition Special price ! If you have a VAT number, we will gladly issue an invoice without VAT As good as new! The part was purchased from a spare parts warehouse of a company, was there for some time in stock but never in operation and has minor storage traces. Immersion pump, cooling lubricant pump, MTR5-6/6 A-W-A-HUUV, Grundfos - 230/400V, 1,1 KW - Hmax. 40,4m, 5,8m³/h - Centering D140mm, pitch circle D 160mm, z4, - immersion depth 280mm Function guarantee! For second hand parts, we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

continuous grilling line completely stainless steel adjustable product height Useful length 1,800 mm Track width 600 mm with bottom and top band: bottom and top contact frying independent temperature control at the top and bottom electrically heated ± 90 kW with belt washing system at the top and bottom Adjustable temperature range per heating plate (6 pieces) Capacity up to 250 kg / hour depending on the product infinitely variable speed Dimensions (L x W x H): ± 3,000 x 1,650 x 2,400 mm

General / technical data: Manufacturer: Rausch Type: RS6/1000 Year of construction: 07/2000 Machine no.: 60305 Weight: approx. 750kg Tractive force: 60kN (80kN) Clearing speed: 4m/min Return speed: 8m/min stroke: 1000mm Maximum tool length: 1200mm Maximum workpiece diameter: Ø approx. 900mm Table opening: Ø 90mm for standard clearing mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to the floor without superstructures) Current type: 400 Volt / 50Hz – 6 / 7,5kW Accessories/ Special equipment: – electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) – integrated coolant system with check valve and drain valve – patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is energized in our wareho ...

CNC Portal Plasma Cutting Machine Manufacturer: Lind Cutting Type: King P4000 Year of construction: 2017 CNC control Track width: 4,000 mm Running track length: approx. 15 m Working area: 2800 x 12000 mm without suction table 1 x Plasma chamfer unit Pro Cut 2D-N Power source Kjellberg HiFocus 440i Filter system Kompac Air 325 660 4x4/o 18.50 KW

cross-section width:: 100 mm cross-section heigth:: 40 mm feed:: 2 - 999.999,9 mm Condition: new, Specification: Impact knife cutting machine CC-600/40 for hoses and profiles - contact length: 600 mm - product diameter: 40 mm - belt width: 100 mm - Tractive force: 400 N to 800 N - Drive: 2 drives upper and lower belt - Conveyor belt speed: 100 m/min - Drive feed, cutting motor: Servo drives - Cutting capacity with blade max.: 4,000 1/min - Connected load: 3.5 kW - Dimensions L/H/B: 1,900 x 1,650 x 960 mm - Weight approx.: 580 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Agilent Monitor M3046A m3 Monitoring Monitor Model M3046A with Bracket+M3001A For sale is a used, well-preserved patient monitor Agilent M3046A m3 STK is still valid until 3/22 + Parameter Patient Module M3001A has usual traces of use and is functional, battery is ok with monitor holder, monitor holder You will receive a VAT invoice. Important: I expressly point out to the buyer that the relevant legal regulations must be complied with in the event of any commissioning of medical devices. Any liability for defects occurring after delivery is excluded. The buyer is responsible for this. In addition, the regulations of the MPG of the MPBV must be complied with and, if prescribed, an STK must be carried out. The buyer must also take care of this.

1 aseptic Elopak filling machine line No E 5 suitable for ESL milk, UHT milk and fruit and Vegetable juice bottling. set at the moment for 3 formats Int. No.B 5, Series No. 453 Manufacturer: SHIKOKU-KAKOKI LTD Type: U-680A Year of construction 2007 with 3-lane run-off section Capacity 10,500 U/h Conveyor belts for individual packaging are manufactured by Polyketting BV Series No. 121614; Year of construction 2013 3 Elopak screw cap gluers a.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2005 Ref. 22111 b.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22121 c.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22122 d.) Individual packaging connection transport system from the Elopak filling machine to the 3 screw caps Gluing machines and on to the inle ...

Proportional valve, 4WRE 10 M64-14/24K4/M, Bosch Rexroth, mint condition Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with few traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Electric motor ALMO MTA 132 SX2 recon Ball bearings renewed from the rotor. Seals renewed. The engine has slight traces of smoke but is in an overhauled and installable condition. Data from the engine see pictures.

machine measurements: 6.850 x 3.600 x 1.900 mm machine weight: 5.000 kg power capacity: 9 kW Condition: used - as good as new unit is still completely packed Specification: Medical surgical mask system complete Consisting of: - See sketches in the attachment Summary of the equipment: This machine is mainly used for automatic forming of plane mask: the whole roll of cloth is driven by roller after being unrolled, and the cloth is folded and wrapped automatically. The nose bridge strip is rolled up for traction and unrolled. After cutting with a fixed length, it is imported into the edge cloth. The two sides are welded to the seal by ultrasonic welding. The mask was transported to two mask ear belt welding stations by the assembly line, and the mask was finally formed by ultrasonic welding. After the mask is made, it is transported to the flat belt line through the assembly ...

+ + + Availability / Delivery time / Pre-order + + + The non-binding estimated delivery time is approx. 3-5 months (+/-) (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can be placed. - - - - - Net price: 2.150 € (excl. VAT) gross price: €2,558.50 (incl. VAT) - - - - - PTO generator 18 kVA with AVR -> More models with 18 - 80 kVA can be found in our other displays - - - - - Data of the PTO generator: - Power: 18 kVA - Voltage: 230 / 400 volts - AVR ESC - Dimensions: 95 x 80 cm - Weight: 134 kg - - - - - Digital Display: - Volt - Display (V) - Ampere - Display (A) - Hertz - Display (Hz) - Power in kVA - Operating hours - Meters - - - - - Requirements for the tractor: - PTO speed: 428 rpm - Recommended tractor power: 40 - 50 hp - - - - - Sockets: - 1x 400V 32A - 2x 1-phase socket 16A ...

Palletizer KRONES PRESS UNI, production year 2007 Along with the conveyors presented in the layout. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors

USED BACHILLER STAINLESS STEEL BEATERS MILL REF.: C4750 Beater mill with a mobile disk with hard wear resistant steel plates. It can be used by two edges, against a static track. It is considered a cold mill because of the high air flow it generates.

Traction test Avery Denison T42 50 tons low price - ideal for retrofit The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools

HILLERSLEV / SCANVAEGT ID.NO. 2152 Hillerslev / Scanvaegt line distributor year of year 2004 3-track track with intralox band. Dimensions L 72 x W 130 cm H 75 + - 20 cm.

+ + + Availability / Delivery time / Pre-order + + + The non-binding estimated delivery time is approx. 3-5 months (+/-) (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can be placed. - - - - - Net price: 2.400 € (excl. VAT) gross price: €2,856 (incl. VAT) - - - - - PTO generator 22 kVA with AVR -> More models with 18 - 80 kVA can be found in our other displays - - - - - Data of the PTO generator: - Power: 22 kVA - Voltage: 230 / 400 volts - AVR ESC - Dimensions: 95 x 80 cm - Weight: 134 kg - - - - - Digital Display: - Volt - Display (V) - Ampere - Display (A) - Hertz - Display (Hz) - Power in kVA - Operating hours - Meters - - - - - Requirements for the tractor: - PTO speed: 428 rpm - Recommended tractor power: 50 - 60 hp - - - - - Sockets: - 1x 400V 32A - 2x 1-phase socket 16A  ...

Number of sanding units: 8 st. sanding width: 150 mm Machine can be inspected during production! Leistomat - Finisch and intermediate leveling machine Löwer LZ 8 -------------------------------------------------- ------------------- for finish sanding (smoothing, defibering and edge breaking) or intermediate sanding profiled window latch - Finish and intermediate sanding machine with eight sanding blade aggregates, 2 surface units at the top (synchronism / counter-rotation) 2 surface units below (synchronism / counter-rotation) 4 profile units with angled arrangement top right, bottom right, top left, bottom left, all mating - linear guidance of all grinding units over Linear ball bearing sets on hardened shafts - Timed immersion of all in the opposite direction rotating grinding units directly above the incoming Workpiece edges to avoid looping through the Primer in the front edge area ...