135,935 used machines on RESALE, but how to find them? Machine Search
Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Q ...
Parts made of compact tractor Shibaura SP 1840 (manual gearbox) with engine damage, e.B. cabin, rear axle gearbox, four-wheel drive front axle, three-point gear, steering, electrical parts, fairings, mask, wheels, front PTO gearbox, front lift, defective engine (cylinder head damage) etc.
Lippert Belt Conveyor Folding Belt GF 1360-750-600 RA1829 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1270x1180 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S ...
Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1090-650-500 RA1399 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...
Electric tow tractor Manufacturer: MOVEXX Type: T 1000 The electric tow tractor can be used in numerous areas. Think about internal and external logistics; however, the machine can also be used to move containers in waste management. The TT1000-T can also move a variety of different types of trolleys, such as roll containers, industrial trolleys and aforementioned waste bins. Technical data pulling aid: 300W / 800 N Weight without battery: 40 kg Year of construction 2020 including battery charging station Maximum weight to pull: 1,000 kg Battery specifications: Lithium battery: LITHIUM LIFePO4 24V / 36 Ah / 922 Wh Year of Make: 2020 Weight: 11.9 kg Condition & accessories, see original pictures! If you have any questions, email or call.
Scissor Roller Conveyor, Scissor Conveyor PAGUS 83 - 190 cm 48 cm Roll Width Height 70 - 105 cm Dimensions: 950 x 650 x 800 mm
ID3517 Liebherr PR731 C-L year/Year of construction 1990 15.8 t Bulldozer with blade and rear ripper, undercarriage good Bulldozer with blade and rear ripper, drive good
Off-road crawler articulated work platform off-road platform caterpillar platform Can also be moved when lifted ideal for tree and hedge trimming, fruit tree management, hop garden cultivation assembly work indoors and outdoors. Due to its low dead weight, the machine can also be transported with a car transport trailer. FRONTEQ Type: FBZ-6T Payload: 230 kg Platform dimensions: 1.15 x 0.75 m Platform rotatable: 80° / 80° Transport dimensions 5.04 m x 1.54 m Height: 2.10 m Weight approx.: 2700 Kg Working height: 8.4 m Platform height: 6.4 m max. radius approx. 4.3 m Climbing ability up to: 45% Maximum working inclination: 3° / 3° Overload Shutdown: Proportional hydraulic drive Battery drive 2 x 4 pcs 6 V / 230 Ah Integrated charger 24 V/ 60 A German instruction manual included 2-year manufacturer's warranty ...
Roller conveyor / pulley conveyor curve 90 degrees Manufacturer: Costo Year of Make: 2009 Condition: Used Model: 90 Degree Curve Total width outside: approx. 2250 mm Total width inside: approx. 1140 mm Total width: approx. 800 mm Conveyor width: approx. 740 mm Total height including side guide: approx. 220 mm Material: Steel Frame height: approx. 120 mm Stock: 2 pieces Price per piece Condition: fully functional, with signs of wear Feet to be ordered separately Material: Steel Ideal for fast material transport Expertly dismantled and packed Internal Article Number: 2026031202 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, ...
A Varpe double-track scale including a Loma metal detector is available. Accuracy class: XIII(1), scale division: 1g, readability: 1g, product weight min./max.: 30g/500g, cadence: 103rpm, speed: 0.5m/s. Documentation available. On-site inspection is possible.
grass catcher, collection container, mower deck, lawnmower, cutter bar, disc mower -without a fan -for side ejection -Dimensions: 1500/800/H1400 mm -Weight: 100 kg
Temperature controller, temperature sensor, temperature converter, temperature monitor, thermostat, flue gas thermostat, trace heating thermostat -Manufacturer: Raychem, thermostat with temperature sensor -Type: TRDR -Temperature range: - 0-15 °C / 0-15 °C -Dimension: 160/105/H55 mm -Weight: 0.6 kg
Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1045-650-500 RA1366 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...
Tow tractor for logistics train towing vehicles, tugger train for logistics trainsElectric tow tractor, electric tractor STILL type CX TZuglast: max. 4000 kgNominal drive power: 3 kWBatterie voltage: 24 volt hydraulic quick coupling (single-circuit hydraulic system, was used for lifting trailers)- towing bracket - plus an automatic battery charger - battery in poor conditionEmpty weight: 740 kgBattery weight: 382 kgTotal weight: 1120 kg3 pieces available:Tractor 1 = Year of construction 2011Tractor 2 = Year of manufacture: 2010Tractor: 3 =
Electric towing vehicle, tow tractor for tugger train SILENT tow tractor STILL type R063-wheel tow tractor, electric tractorFabr. No. W4X126A00120 year of construction 2010Towing load: max. 6000 kgPayload 150 kgAxle load front: 420 kgAxle load rear: 600 kgDrive power: 3.2 kW /60 min. Battery voltage: 24 volts- 3-wheel tractor- without towbar, carrier plate with 14 mm holes, hole spacing 65 /75 x 120 mm- lighting device- 24 volt socket rear- battery from year of construction 2010, type 5 EPzS 625 (24 volt/ 625 Ah) - defective
8 pieces - Tugger train Tow tractor STILL - Electric tow tractor STILL Type CX TLogistic train Towing vehicles, tugger train for logistics trains Year of construction all around 2010 or laterBatteries from 2010 to 2017Plus a chargerScope of delivery for the offer price:8 pieces Electric tow tractor STILL type CX Each tractor has a battery installed.1 piece chargerAll devices workA battery is defective, so a device does not work. Technical data:Tensile load: max. 4000 kgNominal drive power: 3 kWBatteria voltage: 24
4 wheel drive Gears : 16 Forward 16 Reverse Reversing gear available Auction-ID: A3-46146-1025
Deutz DX 110, 6cil Air-cooled, Engine is good, Gearbox is excellent Auction-ID: A3-46146-80
Lippert Belt Conveyor Folding Switch track 1360-750-600 RA1590 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1170x900 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 ...
A compact lawn tractor John Deere is available. Engine: Yanmar 3-cylinder diesel engine, engine power: approx. 22HP, displacement: 894cm³, machine dimensions X/Y/Z: approx. 1900mm/1100mm/1200mm, weight: approx. 450kg. Includes rear spreader and snow plough. An on-site inspection is possible.
Equipped with: PTO, linkage and pull pin. Auction-ID: A1-47387-271
Towing capacity: 6000kg, platform load capacity: 150kg, rated tractive force: 1200N, max. tractive force: 6500N, travel speed with/without load: 20km/h/12km/h, axle load front/rear: 550kg/860kg, wheelbase: 1190mm, track width: 860mm, turning radius: 1650mm, machine dimensions X/Y/Z: approx. 1850mm/1000mm/2100mm, weight: approx. 1800kg. Including 4 trailers. Documentation available. An on-site inspection is possible.
Suitable for Yanmar VIO 75 mini excavator/Nabtesco, model MSP 00 2609
Fendt 936 Vario – 360 hp – front linkage & front PTO – year of construction 2007 Specifications: Brand: Fendt Type: 936 Vario Year of construction: 2007 Identification number: 936231400 Hour reading: 3,254.5 hours read Drive: 4WD Engine: Deutz TCD 2013 L06 4V Engine version: 6-cylinder turbodiesel, common-rail Cylinder capacity: approx. 7,142 cm³ Maximum power: approx. 265 kW / 360 hp Transmission: Fendt ML 260 Vario Transmission type: stepless, hydrostatic-mechanical power branched Driving ranges: 2 Maximum speed: depending on version/admission up to approx. 60 km/h Front tyres: 600/70 R34 Rear tyres: 710/75 R42 Own weight: indicative approx. 10,360 kg Permissible gross weight according to type plate: 13,250–16,000 kg Technically permissible braked trailer load according to type plate: 29,000 kg Length: approx. 5,660 mm Width: approx. 2,750 mm Heig ...
On-board documents ok, MTM 19124kg, TTM 20500kg, MTM TOW 44124kg, 302kw Auction-ID: A1-49292-10
The scope of delivery includes: 01x Rail / Track, used Rail profile: S41-10 Total length: approx. 3,000 mm Width: approx. 125 mm Height: approx. 140 mm Head: approx. 67 mm Bridge: approx. 12 mm Weight: approx. 120 kg / pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Set 4 Nokian Hakkapeliitta TRI tractor tyres with rims – 480/80 R34 + 400/80 R24 – Case IH Vestrum Specifications: Complete set: 4 wheels Rear wheels: 2 pieces Tires: Nokian Hakkapeliitta TRI Tyre size: 480/80 R34 Alternative size: 18.4 R34 Construction: Radial / Steel Belted Version: TL – tubeless Load/speed index: 164 A8 / 159 D Maximum speed D-index: 65 km/h Factory new profile depth: approx. 27 mm Belt width: approx. 482 mm Roll-off circumference: approx. 4,964 mm Mounted on steel DW15 rims Number of bolt holes: 8 Central hub/axle hole: approx. Ø220 mm Measured pitch between adjacent bolt holes: approx. 105 mm Converted bolt circle / PCD: approx. Ø275 mm Weight of loose tyre: approx. 162 kg Weight of the complete wheel including steel rim: indicatively approx. 220–240 kg each Front wheels: 2 pieces Tires: Nokian Hakkapeliitta TRI Tyre size: 400 ...
Interroll Roller Conveyor 0.99m with Drive The Interroll roller track element is in very good condition. Furthermore, the runway has its own drive motor. Width: 400mm Length: 990mm Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!
Fendt 722 Vario 4WD – 163 kW – front linkage & front PTO – year of construction 2014 Specifications: Brand: Fendt Type: 722 Vario Year of construction: 2014 Date of first admission: 23-07-2014 Identification/Chassis Number: 736212017 Reading hours: 11,851 hours Engine power according to vehicle document: 163 kW / approx. 222 hp Maximum engine power: approx. 168 kW / 228-229 hp Engine: 6-cylinder turbodiesel Cylinder capacity: 6,056 cm³ Maximum torque: approx. 1,002 Nm at 1,500 rpm Transmission: Fendt ML 180 Vario Transmission type: stepless Maximum speed: up to 50 km/h Drive: 4WD / four-wheel drive Front tyres: 600/65 R28 Rear tyres: 650/65 R42 Mass according to vehicle document: approx. 8,010 kg Vehicle documents: present Features: Front linkage with folding/folding lift arms Front PTO / Front PTO 1 hydraulic valve front Hydraulic quick coupling ...
ID3683 Deutz TT3 year/Baujahr 2003 13.390 hours/hours 6.9 t
DT75 crawler tractor, on the move, there are various spare parts for it.
Vehicle registration document: number. 2039916 Curb weight: 1480 kg Permissible total weight: 2000 kg Engine: 30 hp at 1900 rpm Displacement: 2175 cm3 Auction-ID: A1-49723-13
Well-functioning International with signs of wear according to age and mileage. Fully working. Auction-ID: A3-46151-17290
A homemade tractor for logging, a motor from a Belaruss tractor, a bridge from the Urals. HIAB 100 lift, controlled from the cab. Everything works, starts, goes. We sell inexpensively, offer a price.
Neat Fiat 80-66, New battery, Engine in good condition, Brakes in good condition, Gearbox in very good condition. Auction-ID: A3-46151-94
On-board documents: ok, MTM 19000kg, TTM 19000kg, MTM TOW 44000kg Auction-ID: A1-49292-2
With the rotary tiller; Auction-ID: A1-49242-63
Rail wheel, flanged wheel, track roller, track wheel, wagon wheel, track roller -Rail wheel: Flanged wheel with bearing -Wheel: Ø without flange 193/197 mm, see photos -barrel width: mm -Axle Ø: approx. 17 mm -Number: 2x wheel available -Price per piece -Total dimensions: Ø237 x 100 mm -Weight: 7.0 kg/pc.
maximum number of results exceeded
please refine your search
80 € 
