We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,781 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Manufacturer: Hebrock, Type: AKV 2001 DK, Year: 1997, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: 8, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: Radius, Corner tracing type: yes, 1 motor: yes, Radius scraper: yes, Bonding part EVA: yes, FREE TEXT: Zustand sehr gut, Year :1997
used
Manufacturer: Brandt, Type: KS 23, Year: 1988, Min-max edge material mm: 0,5-12, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 55, Min-max feed m/min: 12, Premilling: no, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Edge sanding: yes, Year :1988
used
Manufacturer: SCM , Year: ca.1995, Control: hand, Number of profile spindle: 1, Tracer: yes, Max. operating height mm: 50, Spindle travel range total mm: 110, Number of milling spindles: 1, Milling spindle kW: ca.1,5, Milling engine rpm: 10000/20000, Grid depth setting: yes, Tracer pin in the table: yes, Number of tables: 1, Table size in mm: 7700 X 900, FREE TEXT: Tischub per Handrad 200 mm/pneumatisch Fusspedal, Year :ca.1995
used
Manufacturer: Brandt, Type: KD 99, Year: 1998, Control: Homatic, Min-max edge material mm: 0,4 - 3,0, Work piece width min-max mm: 62, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 60, Edgeband height max mm: 62, Premilling: yes, Bevel milling: yes, Corner tracing type: yes, 4 Motoren: yes, Nuten : yes, Radius scraper: yes, 4 Motoren: yes, Compressed air bar: 6, Machine lenght mm: 8740, Noise enclosure: yes, Rückführung Typ: yes, machine ready for demonstration: yes, Year :1998
used
Manufacturer: IMA, Type: Quadromat 4012 F, Year: 1995, Program: yes, Min-max edge material mm: 0,5 - 8,0, Min.-max. workpiece length in mm: 250, Min-max feed m/min: 10, Premilling: yes, Min.-max. batten magazine mm: 0,5 - 8,0, Mitre stations: yes, radius milling: yes, Corner tracing type: yes, 2 Motoren: yes, Year :1995
used
Manufacturer: Homag Ziehklingenaggregat, Ausführung rechts: yes, Radiusziehklinge: yes, Steuerbar: no, Tracing by roller: yes, Wechselstähle: yes, Wendemesser: yes, Radien 2/3 mm: yes, Automatischer Radienwechsel: no, Ständeraufbau: yes, Kettenbahn/Oberdruck: yes,
used
Manufacturer: Homag Ziehklingenaggregat, Ausführung rechts: yes, Radiusziehklinge: yes, Steuerbar: no, Tracing by roller: yes, Wechselstähle: yes, Wendemesser: yes, Radien 2/3 mm: yes, Automatischer Radienwechsel: no, Ständeraufbau: yes, Kettenbahn/Oberdruck: yes,
used
Manufacturer: Homag, Type: KL 10/21/QA, Year: 1999, Program: Homatic, Control: PC 21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 50, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-30, Axis control: yes, Infeed table: no, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, IR zone: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: yes, Radius milling axis adjustment: yes, Corner tracing type: FK 13, 2 Motoren: 2, Magazin : 2 X 12, with tool holders: HSK, Grooves, slewable-controlled: Freiplatz, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Corner trace buffing: no, Corner trace buffing: no, Bonding part EVA: 2 Stück, Number of tools per tool-magazine: 2 X 8, Buffing unit: yes, Roller/belt: Riemen, Freiplätze: ...
used
Manufacturer: Homag Radiusziehklinge, Ausführung links: yes, Radiusziehklinge: yes, Tracing by roller: yess, Wechselstähle: yes, Wendemesser: yes, ziehend: yes, Radien 2/3 mm: yes, Automatischer Radienwechsel: no, Ständeraufbau: yes, Kettenbahn/Oberdruck: yes, Zustand: gut, Available: sofort,
used
Manufacturer: Homag Ziehklingenaggregat, Ausführung rechts: yes, Radiusziehklinge: yes, Steuerbar: no, Tracing by roller: yes, Wechselstähle: yes, Wendemesser: yes, Radien 2/3 mm: yes, Automatischer Radienwechsel: no, Ständeraufbau: yes, Kettenbahn/Oberdruck: yes,
used
Manufacturer: IMA , Type: Advantage 5620, Year: 2001, Program: IMA, Control: IMA, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 70-1300, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 45, Min-max feed m/min: ca. 20, Premilling: yes, IR zone: yes, Lasertechnik: yes, Kw-Leistung Laser: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: yes, Grooves, slewable-controlled: yes, Type of scraper: yes, Cleaning nozzles: yes, Edge sanding: yes, Profile sanding top bottom: Rolle, Roller/belt: 6, Year :2001
used
Manufacturer: IMA Kantenbearbeitung , Type: U/F 720 V/Compact, Program: yes, Control: no, Min-max edge material mm: 3, Work piece width min-max mm: 60, Min-max edge material mm: 3, Work piece width min-max mm: 60, Edgeband height max mm: 70, Min-max feed m/min: 3, Finished product: 250, Soft forming: 2, Axis control: no, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: Granulat und PU, Profile milling: no, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, IR zone: MFA 843, Coil magazine: yes, Strip magazin: yes, Radius milling axis adjustment: Riemen, Corner tracing type: 10-25, 4 motors: 6,
used
Manufacturer: Brandt Eckenkopiergerät, Type: FP 10, Edgeband thickness max mm: 3, Edgeband height max mm: 55, Working widht max mm: 80, Kopierfunktion single sided: yes, Tracing by roller: yes, Cycle time automatic: yes, Engine milling kW: 0,5, Compressed air bar: 6, Wight approx. kg: 150,
used
Manufacturer: HolzHer, Type: 1444, Year: 1991, Min-max feed m/min: 10 - 20, Premilling: yes, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Top pressure belt/roller: Rolle, Year :1991
used
Manufacturer: Hebrock, Type: TF 03, Year: 1998, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Kopierfunktion single sided: yes, Tracing by roller: yes, Arbeitstakt automatisch: yes, Engine milling kW: 0.5, Machine lenght mm: 1000, Compressed air bar: 6, Wight approx. kg: 200, mit Schwabbelstation, Year :1998
used
Very well maintained SLM 280HL 2.0 (dealer demo machine) with approx. 1900 laser hours for sale., The system has been cleaned without powder and is ready for shipping. The system was professionally dismantled by SLM dealers., Direct link: https://www.maschinenmarkt.layerbylayer.de/angebote/4427000-bedarf-201 8-slm-solutions-slm-280hl-2-0-single, Installation: 2018, equipment: HRSH 050 L/W 5kW cooling unit, PSM 100 V3 vibrating screen station, SLM AMC 330 safety vacuum cleaner, BPH 280 handling device, Installation space in mm (x/y/z): 280x280x350, laser power: 400W, build speed: 35 cm3/Hour 35 cm3/Hour, practice layer thickness: 20-100μm, Min. track width / wall thickness: 180µm, Operative beam focus freely selectable: 100µm - 700µm, compressed air requirement: ISO 8573-1, 18l/ bar, Dimensions in mm (w x h x d): 1800 x 1900 (2400) x 1000, Weight in kg: approx. 1000, E-connect ...
used
max workpiece width: 2500 mm max thickness: 150 mm Feed by chain track Top pressure by belts Equipment: 1+1 Saw motor 7,5 kW
used
turning diameter: 700-1500 mm clamping length: 3000 mm guage width: 1676 mm Control: weight of the machine ca.: 60 t Rafamet UBC 150 wheelset lathe for railway wheelsets Serial No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Gauge of the wheelsets to be machined in standard version: 1435mm track widths: 1435mm , 1524mm , 1676mm Length of wheelsets to be machined: 1640-3000mm Running diameter of the wheelset: 700-1500mm Driving diameter: 350-1350mm Width of the wheelset tyre: up to 140mm Fork dimensions of the wheelset lathe_ 8700x360x3250mm Total installed power: 172kW Weight of the machine: 59200kg Speed of the setting movement Lifting and centring device: 2500 mm/min. Headstocks: 1320 mm/min. Quills: 550mm/min. Supports in the longitudinal direction: 1300 mm/min. The data for this ad was created with ModulMWS - the software solution of LogoTe ...
used
TECHNICAL SPECIFICATIONS Manufacturer: PS Förder- und Lagertechnik (KW Kranwerke) Designation: Bucket chain excavator Type: PSZ-80L Year of construction: 1992 Design: Land-based on crawler chassis Flow rate: approx. 100 cbm/h Conveyed material size: approx. 0 - 16 mm Conveying speed: 44 m/min Conveying depth: max. 15 m Bucket capacity: 75 ltr. Number of buckets: 47 pcs. Length of lower bucket ladder: 22.0 m Upper bucket ladder length: 6.85 m Boom length: 14.0 m Boom lifting speed: 1.5 m/min Discharge belt length: 15.0 m Discharge belt width: 650 mm Discharge height conveyed material: 5.5 m Travel speed: 2 m/min Track width: 900 mm External dimensions of track: 4,100 mm Generator: LEROY-SOMER Diesel Three-phase Generator Set Generator type: LSA 4450 VL11 (100 kW / 125 kVA) Current type, frequency, speed: 400/230 V, 50 Hz., 1,500 rpm Engine: IVECO diesel engine ...
used
HP Indigo Press ws4500 Seven Color Printing Press Age: 2007 Impression: 45mio One Shot color Pentium CPU with Windows XP 72 GB Virtual Image Memory (RAID) internal HP Indigo RIP (Adobe PostScript 3) ITT (Image Tracking Technology Inline Densitometer Color Personalization HDI (High Definition Imaging) DVD writer OFIR (Online Fast Ink Replacement) 5th, 6th and 7th color (white, orange, purple) Blanket Cleaning Station BID washer WebReinsertion kit for duplex printing Spare Ink Tank Ink Mixing System Without Chiller
used
Single-Girder Bridge Crane, Bridge Crane, Overhead Crane with Track, Bridge Crane with Electric Chain Hoist, Portal Crane; Used Machine Manufacturer: S+V 98 Ltd Type: DP-013-3200-400-800 Year: 2013/05 Last Inspection: 2023.03 Capacity: 3.2 tons Bridge Crane with Electric Chain Hoist: Width: 4000 mm Span: 3800 mm Weight: 1950 Kg Capacity: 3200 Kg Lifting Height: 2900 mm Trolley: Yale With Wired Remote Control Electric Travel and Lifting Crane Track: Length: 8220 mm Width: 4000 mm Height: 3800 mm Profile: HEA 220 Lifting Height: 2900 mm Span: 3800 mm
used
• 10-track for thermal foils, max. temperature 220°C • Intermittent operation • Output max. 45-50 cycles/min (450-500 sticks/min) • Volume dosing (10 dosing slides) for mini tablets/granules/powder free-flowing 250 -1500 mg/bag • Bag lengths adjustable 50-155 mm • Bag widths depending on format set, with format set for belt width per bag 46 mm, finished bag width 18 mm • Product suction via Piab Vacuum Conveyor • 10 hot-stamping units Schmucker PL 1B MB, single-line, 17 types • Cutting knife for tear notch • Horizontal knife • Ionisation unit Haug for ionisation product infeed • Dust extraction • Outfeed belt 10-lane, e.g. for connection to 10-track 100% checkweigher (see our item no. 10-0219) • Lateral conveyor belt for bad bags • Transport trolley for film reel • PLC Siemens S7-300 • Electr. connection 380V/50Hz
12 galvanized conveyor belts, belt width 650 mm, capacity 150 to 200 t/h Lengths from 8 meters to 60 meters Left - clockwise rotation, with traction drive 037 KW Tel. 01715213204
new
turning diameter over bed: 290 mm turning diameter over slide rest: 170 mm turning length: 750 mm turning speeds: 75 - 2000 U/min centre height: 145 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK tailstock quill stroke: 80 mm connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,34 t dimensions of the machine ca.: 1,3 x 0,75 x 0,7 m 2-axis LCD digital display system (now new). Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Qty.1 Second-hand Aluminium cold rolling mill Mfc.: SPIDEM Type: 4-Hi Non Reversing Built: 1964 Installed: 2017 (new mechanical & hydraulic, PLC – ABB, AGC) Stopped: 2020 Strip width: 1700 mm Thickness Entry: 11 mm Exit: 0.2 mm Rolling speed: 450 m/sec. with edge trimming: 300 m/sec. Mill force: 1500 T WR Length: 1830 mm Dia.: 465 / 500 mm Back-up rolls Length: 1830 mm Dia.: 1100/1200 mm De-coiler Max. counter traction force: 5500 kgP Reduction ratio: 1:5.53 Revolution: 72.3 – 199 RPM Speed: 136.5 – 375 m/min. Coiler (2 x 400-1100 RPM) Max. traction force: 15000 kgP Reduction ratio: 1:4.41 (470 m/min.) Speed: 9.9 – 200 m/min.
new
Pulverbeschichtungsanlage für Autofelgen Kann 4 Stück 22"-Felgen in 1 Charge pulverbeschichten Komponenten der Anlage: 1,5x1x1,28m Pulverbeschichtungsofen, 18KW elektrisch VFK-2 einseitige manuelle Pulverbeschichtungskabine Förderstrecke und Ladewagen Manuelle Pulverbeschichtungsanlage Lieferung - 8 Wochen EXW Istanbul Fabrik Inklusive Montage und Schulung Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment Delivery - 8 weeks EXW Istanbul Factory Assembly and training included
new
TRANSFER TYPE POWDER COATING LINE Curing oven - gas, diesel or electrical source Powder coating booth - cyclone type or cartridge filtered Powder coating equipment - manual or automatic system Overhead conveyor system - tracks trolleys and frull structure Contact us for quotation We provide the best technical solutions and competitive prices German speaking contact in Germany VOGAMAKINA Ltd.
used
Assortment Tool Holder, Cutting Unit, 12 pieces KENNAMETAL 4x TEH6273482 F68500170 1x KM40NVJCL16 1056CE5 2x KM40TSMDJNL1506 F68500070 3x KM40TSNVHCL16050M 116195994B7CV, F68500090 2x KM40TSNVHCR16050M 114378850C5CV, F6850075 mounting type, machine side: KM40TS, KMT - Modular cone interface with ball track system, HORN-TS40, UTS-System ( WIDIA ) used, tested ! Dimensions ( packaging ): 235 x 150 x 125 mm
used
Continuous checkweigher: • Specially set up for aerosol cans/bottles Ø 23 mm • Belt run from right to left • Load cell SW-D-FS with 2 tracks (2 objects are weighed simultaneously) • Passage with cycle star for object Ø 23 mm • Weighing range 0.1 - 500 g • Capacity max. 100 weighings/min • e=d 0.05 g • Paper printer • Various interfaces (Ethernet, USB, CAN, RS 232, RS 422) • HC operating terminal • Without infeed conveyor up to cycle star and outfeed conveyor between cycle star and infeed Camera box Coding station: • Receptacle for printhead Domino inkjet printer (without printhead and inkjet printer) • Camera control object bottom • bad ejection camera/weight with blowing nozzles • Connection 115/230V/50/60Hz Scale has worked together with aerosol filling/sealing unit (our item no. 13-0102).
used
Brand : Barriquand Steriflow Model: 1351 EA Year of manufacture: 1994 Type: sterilisation autoclave Capacity: 6.57 m3 / 6570 dm3 (5 baskets) Fluid: overheated water / steam Design pressure: 5 bars Design temperature: 150?C Exchanger type IJMS Equipped in 2017 with an MPI Expert kit: improved visibility and traceability of cycles. Technical file and regulatory report available.
new
Key data: 68 KW, 85 kVA, 400 V
PTO generator 85 kVA for field operation, optionally also for yard operation Aggregate type: transportable Design: Weatherproof IP 44 PTO : 540 Technical Data Generator: Generator manufacturer: WA Generator type: WA-ZB 85/4 Gene. No.: on request Generator power: 85 kVA Dimensions of the unit: Width approx. mm: 800 Height approx. mm: 923 Length approx. mm: 1,204 Weight approx. KG: 386 Scope of delivery: PTO generator for field operation, optionally also for yard operation, building seizing with 1H socket according to VDE 0100-551 with synchronous three-phase generator, incl. electronic voltage regulator AVR in protection class IP 44 (splash-proof) Gearbox for 540 PTO Tractor power / min. KW 125 Tractor power / min. hp 170 PTO speed / rpm 400 Generator speed / rpm 1,500 Required PTO / NM 2.671 Sockets / Mennekes / PCE ...
used
Tires, solid rubber tires, tractor tires, forklift tires -Tire size: 7.00-15 SC10 -4 pieces available -Price per piece -Dimension: diameter 700 x 170 mm -Weight: 52 kg
used
Pig slaughterhouse, approx. 200 pieces/hour. Location: 26215 Wiefelstede/ Germany The system is dismantled into individual parts. -consisting of the following components: -1): 1x rider seat retainer with automatic Cardiac/cerebral anesthesia, color. Banss, type LVR-8940L -2): 1x bleeding plate conveyor, make Banss, type EFB -4): 1x plate conveyor type PB-1500 -5): 2x flame/hygiene flame oven, make Banss, type BF2 -6): 1x dry whipping machine make Banss, type T3S -7): 1x whip washing machine make Banss, type AW -8): 1x pre-washing machine, make Banss, type V3S -9): 1x condensation brewing tunnel, make KBT-220 -10): 1x continuous hair removal machine, make Banss, type 300-2/1 -11): 1x lot of cable -12): 1x bleeding and brewing tunnel conveyor -13): 1x giblet conveyor -14): 1 slaughter conveyor -15): 1x PLC control, make Siemens, type S7-414-2DP -16): 1x weighing rail conveyor, make Bans ...
used
for lawn tractor, ride-on mower, lawn mower, lawn tractor, mower, lawn mower, cutter bar, disc mower -Lawn mower blades: 48 pieces -different: types -different: sizes -Package: complete -Price: for all 48 lawnmower blades -Weight: 120 kg
used
Front broom, front sweeper, roller brush, broom -suitable for: Iseki Hako and other tractors -PTO drive -Three point mounting -hydraulic: swiveling -Broom width: 1200 mm -Own weight: 140 kg
used
Longitudinal carriage, chassis, welding carriage, longitudinal carriage, automatic welding machine, welding carriage, inert gas welding device, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding device, rail runner, welding tractor -Stable, compact and modular design -4-wheel drive via stepper motor -Wheels with polyurethane treads -Excellent directional stability -Viscose damper for constant driving -Integrated position measuring system -Reinforcement frame with mounting spigot for wire feed -4 pieces of lifting eyes -Power supply and PLC power unit integrated in the chassis -Power cord with plug: 12 m -Control line to the power source: 10 m -Incl. Hose package
used
Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, length 3.6 m on a solid base frame, height adjustable -Roll width: 490 mm -Roller diameter: 90 mm -Roller spacing: 100 mm -Quantity: 2x roller conveyor available -Price per piece -Dimensions: 2490/570/H760 mm -Weight: 216 kg/pc.
used
Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, length 3.3 m -Roll width: 705 mm -Roller diameter: 80 mm -Roller spacing: 200 mm -Dimensions: 3300/760/H295 mm -Weight: 180 kg
used
Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not driven, length 4.0 m each, 2 pieces -Roll width: 800 mm -Roller diameter: 80 mm -Roller spacing: 200 mm -Price/tax: complete -Dimensions: 4000/840/H260 mm / 4000/840/H240 mm -Total weight: 336 kg
used
Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, length 3.6 m -Roll width: 1200 mm -Roller diameter: 83 mm -Roller spacing: 200 mm -Dimensions: 3600/1220/H265 mm -Weight: 206 kg
used
Track roller, swivel roller, transport equipment roller, fixed roller -Manufacturer: Tente, swivel castor -Wheel: Ø 80 mm -Width: 60mm -Hole spacing: 105 x 78 mm, Ø 11 mm -Quantity: 11x swivel castors available -Price per piece -Total dimensions: 150/110/H135 mm -Weight: 3.3 kg/pc.
used
Diesel engine, drive engine, tractor engine, stationary engine -Manufacturer: Deutz, diesel engine type F6L 912 -Power: 112 HP / 82 kW 2500 rpm -6 cylinders: air cooled -Origin: from forklift Linde H60 D -Individual components: see photos -Dimensions: 1620/1100/H860 mm -Weight: 770kg
used
Rail wheel, flanged wheel, track roller, track wheel, wagon wheel, track roller -Rail wheel: flanged wheel with bearing -Wheel: Ø without wheel flange 130 mm, see photos -Receptacle: Ø 30 mm -Dimensions: see photos -Quantity: 124 rolls available -Price per piece -Total dimensions: Ø 160 x 45 mm -Weight: 3.3 kg/pc.
used
Roller conveyor, conveyor track, roller conveyor belt, roller conveyor, saw roller stand, saw roll stand, saw stand, saw roller conveyor, length stop, longitudinal stop, saw stop, material stop, motorized length stop, controlled length stop -Roller conveyor: Saw roller conveyor, 2 pieces / one-sided with stop rail -Roll width: 250 mm -Transport length: 2130 mm -Rollers: Ø 50 mm -Roller spacing: 300 mm -Total height of roller conveyor: 880 mm -Transport dimensions: 2130/400/H250 mm -Total weight: 73 kg
used
Roller conveyor, conveyor track, roller conveyor belt, roller track -Handover: in current condition as seen -Conveyor rollers: 1 piece is missing, see photos -Roller conveyor: not powered -Roll width: 740 mm -Diameter roll: 90 mm -Center distance: 610 mm -Total dimensions: 6020/960/H845 mm -Weight: 400 kg
used
Roller conveyor, conveyor track, roller conveyor belt, roller conveyor -Handover: in current condition as seen -Conveyor rollers: 6 pieces are missing, see photos -Roller conveyor: with electric drive -Roll width: 800 mm -Diameter roll: 110 mm -Axle distance: 200 mm -Drive: SEW-Eurodrive 0.37 kW 1415/64 rpm -Speed: 24 m/min -Total dimensions: 7370/1300/H1080 mm -Weight: 730 kg
used
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller track, carrier rollers -Conveyor roller: transport roller with bearing block -Diameter roll: 108 mm -Transport width: 1200 mm -Total dimensions: 1365/161/H110 mm -Weight: 19 kg
used
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller track, carrier rollers -Conveyor roller: transport roller with bearing block and drive wheel -Diameter roll: 130 mm -Transport width: 1200 mm -Sprocket: Ø 165 mm -Total dimensions: 1365/166/H166 mm -Weight: 28 kg
used
Hydraulic pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: Plessey, hydraulic pump type A096X -Electric motor: EMI type D 112/2R-6/8 24 volts / 2 kW -Dimensions: 290/115/H130 mm -Weight: 10 kg
used
Roller conveyor, conveyor track, roller conveyor belt, roller conveyor -Roller conveyor: not driven -Roll width: 370 mm -Roller diameter: 80mm -Roller spacing: 100mm -Dimensions: 2000/510/H290 mm -Weight: 93 kg