tr used for sale

: 420 mm : 220 mm : 380 mm : 840x390 mm : 950x250 mm : 65-2600 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm : 220 mm : 380 mm : 840x390 mm : 950x250 mm : 65-2600 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 19560 KW, 11000 V

Multifuel 19.5 MW Wartsila CHP Power Plant with 2 x 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power and 9.5 tons/hour of saturated steam at 10 bar. In addition, the delivery includes an ...

Henkovac TPS 2000 Automatic Traysealer – Excellent Condition – In Stock (Netherlands), We offer a very clean and well-maintained Henkovac TPS 2000 traysealer, equipped with a powerful, 160 m³/h Busch vacuum pump, now available directly from stock at STC Food Solutions in Emmeloord, The Netherlands., This machine has been taken straight out of production, is in excellent working condition, and ready for immediate use., With 1/2 Gastro tooling; 325 x 265 (2x), ---------------------------------------------------------------, Key Features, - High-capacity automatic traysealer for MAP and vacuum packaging, - Equipped with integrated Busch vacuum pump (160 m³/h), - Dual mould system – seal two trays simultaneously for high throughput, - Suitable for a wide range of food products (meat, ready meals, vegetables, etc.), - Quick and easy mould change system, - Transparent cover for excelle ...

Transnorm belt conveyor GF 4365-600-500 RA2493 Technical data: Conveyor length (NL): 4365 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 45 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 4365 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 Co ...

Transnorm Rising falling Incline belt conveyor with leading belt GF 800+4650+560-600-500 RA2494 Technical data: Conveyor length (NL): 6100 mm ( 560 mm arch + 4650 mm riser segment + 800 mm leading ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 6100 ( 8 ...

Transnorm accumulation roller conveyor 19000-600-550 RA2491 Make: Transnorm Roller width (RB): 550 mm Nominal/outer width (NB): 600 mm Length: 19000 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Drive Eletrical Data: 380 V, 0,37 kW Accumulating space size: 700 mm Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: scope of delivery: without supports and side guides Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation Nominal / outside width in mm: 600 Roll width in mm: 550 condition: gut Jam detection: Lichtschranke nominal voltage: 380-480 V Conveyor speed m / s: bitte Kontaktieren Roll division in mm: 76 Conveying length in mm:  ...

Transnorm roller conveyor 3620-600-555 RA2492 Make: Transnorm Roller width (RB): 550 mm Nominal/outer width (NB): 600 mm Length: 3620 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Gear Motor Eletrical Data: 380 V, 0,37 kW Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Construction year: 1995 nominal voltage: 380-480 V Conveying length in mm: 3620 Nominal / outside width in mm: 600 Roll width in mm: 550 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: including side guides without supports For individual, expert advice, simply get in to ...

Double corner round slotting machine Tränklein EK-D 100; cleaned and tested; 2x Knife 16mm (other sizes on request); Insertion height max.100mm; optical sensor; Foot release. Double corner rounding machine Tränklein EK-D 100; cleaned and checked; 2x knife 16mm (other diameters on request); max.pile hight 100mm; optical sensor; foot switch.

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

A Bous spray cleaning system is available. Usable space dimensions X/Y/Z: 470mm/650mm/300mm, max. material weight: 100kg, filling quantity: 500l, max. temperature: 70°C, heating capacity: 18kW, exhaust connection diameter: 108mm, drying capacity: 11kW, weight: approx. 1600kg. Including loading station and oil separator. Documentation available. An on-site inspection is possible.

Transnorm conveyor belt GF 5650-600-500 RA2450 Technical data: Conveyor length (NL): 5650 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 41 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 5650 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 ...

Transnorm Rising falling Incline belt conveyor with leading belt GF 800+1275+1005-700-600 RA2499 Technical data: Conveyor length (NL): 2980 mm ( 830 +150 mm arch + 1200 mm riser segment + 800 mm leading ) frame width (NB): 700 mm, 900 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 2980 ( 800 + 1275 + 1005 ) Nominal / outside ...

A total of two identical Tria S.p.A. plastic granulators are available. Rotor knives: 3, stator knives: 2, rotor diameter: 260mm, motor power: 7.5kW, throughput: 150kg-220kg/h, hopper opening: 350mm/300mm, hopper capacity: 30l, discharge hopper capacity: 15l, year of manufacture: 2015/2020. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

turning diameter: 250 mm turning length: 600 mm control: FANUC Series 31i-Model A total power requirement: 23 kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: 2.880 x 2.130 x 1.990 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Can filler CFT type Master Can Tronic RS 40/6 with 40 filling valves and 6 head can seamer isobaric filler year of manufacturing: 2013 capacity: 20 000 cph by 500 ml standard cans, on beer 24 000 cph by 330 ml standard cans, on beer can end: 202 Can diameter - min-max.: 50 - 66 mm Can height - min-max: 75- 190 mm pitch: 141 mm incl. lid feeding system incl. control system: PLC Siemens S 7 filling product: beer filling temperature: 2-4°C as nice range for beer The last major service combined with an upgrade of the machine was done in November of 2024. The machine is still in production until the end of June/ bginning of July 2026.

This 3-axis Trotec Rayjet R400 was manufactured in 2021. It features a powerful 100 W DC CO2 laser source and a generous working area of 1030 x 630 mm. The machine is equipped with an air assist system, LED lighting, and a control panel for precise laser positioning. If you are looking to get high-quality laser engraving capabilities, consider the Trotec Rayjet R400 laser engraving machine we have for sale. Contact us for further details.

Transnorm Pneumatic Pusher 900-600-500 90° RA2092 Technical Specifications: External Dimensions of Mounting Frame: LxWxH=980x700x825 mm Maximum Product Width: 900 mm Maximum product height: 640 mm Maximum conveyor belt-frame width (NB): 600 mm Maximum conveyor belt-frame height (BH): 90 mm Support feet: available as an option Drive: Pneumatic cylinder Optionally available : Control system Prices net plus VAT from the central warehouse of Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

General SKU249Y201 MakeDe Lama Serial0219 Pressure Working pressure0.4 Bar Vacuum possiblecheck Working pressure trays3.5 Bar Main Features MaterialStainless steel Volume305 Ltr. Surface1.5 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface1,5 m² Drying chamber capacity305 l Max. temperature95 °C Number of trays7 Tray sizes510 x 500 mm Distance between the trays50 mm Max. temperature95 °C With 1 doorcheck Connection for the vacuum pumpcheck With vacuum pumpLeybold Motor0.55 kW (380 V, 1350 rpm) MaterialStainless steel 1.4435 (316L) General TypeDLDR/V Year of construction2003 LocationBarneveld With switchgear(as is) Floorspace1,60 x 1,05 m Total height2,00 m CEcheck Extra SpecificationsWith tray holder and trolley, touchscreen controlPaints & coatingsPowdered foodsGeneric medici ...

Manufacturer: Trumpf Model: Trumatic L3030 Type: TC L3030 Laser type: CO2 Laser power: 4,000 W Year of manufacture: 1999 Electrical and Utility Data - Mains supply: 400 V / 50 Hz - Connected load: 88 kVA - Control voltage: 24 V - Compressed air: 6 bar Condition and Availability The machine was in continuous production use until November 2025 and remains powered on.The resonator has been replaced once during its service life. Find more here - .ucymachines/ Contact us at - sales@ucymachines

This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, dual tool carriers with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant cleaning system and a hinged belt conveyor for efficient chip removal. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC65 DG horizontal turning machine we have for sale. Contact us for further details.

Fixed setting stick approx. 100 mm for SN 40

AUTOMATIC PAPER STACKER TRUMAX HYPERSTACK -Year 2006 -Max width 125 cms. x lenght 90 cms. -Height 1,50 meters -Two side papers equalizers -Can be installed on the exit of any machine with a belt delivery

Storage tape especially for automation (e.g. "ghost shift", clipboard, buffer) Consisting of two ribbons on one belt, the empty cartons are and on the second belt are the filled cartons. The two conveyor belts are equipped with the EUROMAP67. This allows the belts to be connected to the machine and the removal robot programmed. Manufacturer: KRAUSS MAFFEI Year of Make: 2010 Length of the conveyor belts: 6.00 m each Width of the conveyor belts: 1.75 m in total

Electric drive Foot switch actuation, Various tools are included in the delivery: 1 x top/bottom knife with radius 4 mm 1 x top/bottom knife with radius 6 mm 1 x top/bottom knife with radius 7 mm 1 x top/bottom knife with radius 8 mm 1 x top/bottom knife with radius 9 mm 1 x top/bottom knife with radius 15 mm (currently in use)

5.5m Total. 4m Box Trailer. Spacious Food Area New Catering Trailer / Burger Van 4 metre box stainless Steel cabinets. 5.5m total length with tow hitch. We have for sale a catering trailer, newly manufactured, delivered but never kitted out or put on the road. Everything is brand new. It has a couple of scratches to the body which with a bit of tlc can be covered with stickers or sorted. Some of the finished metal work needs a little tlc, finishing trims etc. In need of a good clean inside and out. Electric box with sockets fitted internally at factory Built in cash draw Stainless steel cupboard doors/ counter tops, chequered plate floor Two hatches. One main serving and side hatch. New tyres

Manufacturer: Trützschler Model: ZNM-D Year of Manufacture: 2011 Technical Specifications : - Working width: 3.600mm - Cutting positions: 3 double cuts Additional information: - Machine is WITHOUT Control System! Find more here - .ucymachines/ Contact us at - sales@ucymachines

Rated load capacity: 5t, clamp pressure/working pressure: 18/16MPa, front overhang: 575mm, center of gravity Px/Py: 480/810mm, weight: 2.1t. An inspection on site is possible.

A longitudinal circular splitting saw is offered. Saw blade Ø: 400mm, cutting length: 400mm, cutting depth: 130mm, integrated coolant system, swiveling saw head for miter cuts, manual feed, base cabinet. Inspection possible by arrangement.

Line is consisting of:, Treif slicer, Type: Divider 660+, Serial number: 660002.21888.133706, Year of construction: 2018, Cuts: max 2640 RPM, Slice thickness: 0.5 - 25 mm, Stacking height: up to 100 mm, Product size: max 280 x 160 mm, Product length: max 850 mm, Belt width: 385 mm, Compressed air: min 6 Bar, Power: 3 x 400V, 50Hz, 7.5kW, Dimensions: 1900 x 1050 x 2150 mm, Weight: 850 kg, Including knife holder and tool trolley, Treif / Wipotec check weigher, Belt width: 345 mm, Weighing platform: 400 mm, Dimensions: 400 x 1100 x 1050 mm, Treif transversal sorter, Belt width: 420 mm, Dimensions: 700 x 1050 x 1050 mm, Treif sorting conveyor, Belt width: 420 mm, Dimensions: 2300 x 1150 x 1250 mm, Treif knife sharpener, Type: HS-380, Serial number: 243003.61973.105787, Year of construction: 2009, Dimensions: 500 x 900 x 1650 mm, Weight: 90 kg, Variovac thermoformer, Type: Optimus, Serial num ...

Belt width: 600 mm, Belt speed: 15 m/s, Infeed height: 700 mm, Outfeed height: 1650 mm, Power: 3 x 400V, 50Hz, 0.75kW, Dimensions: 3800 x 800 x 2050 mm

Max. pipe extension length: 3,000 mm 4-fold bending angle preselection with digital display up to 180° Working area 6 to 38 x 5 or 48.3 x 3.25 mm Includes pre-assembly device with hydraulic cylinder Deburring unit for tubes inside and outside from 6 - 48.3 mm Tools included: Bending mandrels: 35 x 2, 28 x 2.5, 22 x 2, 42.2, 18 x 2, 28 x 2 Bending shoes: 42, 38, 35, 18, 30 ZD, 16-R 35, 22 R 45, 20-2 XD, 25-2 XD, 28 R 55 Weight: approx. 600 kg

Inv. Num. : 6826 Type: TruLaser 3030 Producer: Trumpf Created: 2010, GO 2020 Parameters: Laser ON: 74680 Beam ON: 29226 Laser power: 6 kW Work table length: 3030 mm Work table width: 1500 mm Source: TruFlow 6000 Equipment: Cooling Suction

Power supply: 75A, connected load: 35kW, control system: Traub SYSTEM TX 8F, weight: approx. 4.5t, operating hours: 84,126h, the machine has problems when machining inclined surfaces. An on-site inspection is possible.

Offered is a high-performance solid-state disk laser. Laser power: 6000W, beam quality: 8mm mrad, wavelength: 1030nm, laser diode rated power: 29kW, control: TRUMPF LaserControl S. Equipped with internal heat exchanger, Grundfos pressure pump CRI10, integrated safety circuit, 2-phase fiber optic connection box. Weight: approx. 2000kg, overall dimensions X/Y/Z: approx. 1750mm/850mm/1370mm. Inspection possible by arrangement.

Workpiece dimensions: 4000x2000x20mm, laser power: 4kW, connected load: 88kVA, nitrogen/ oxygen connection: 30/ 20bar, control system: Siemens 840D, length: 7000mm, width: 3600mm, height: 2300mm, weight: 12.5t. An on-site inspection is possible.

General SKU026N542 LocationBarneveld MakeTria (It) Main Features Motor15 KW Inlet diameter400 mm Width420 mm Specified Features - Granulator Granulatorcheck Rotor width420 mm Rotor diameter400 mm Open rotorcheck Number of rotor knives3 Number of stator knives:2 With hoppercheck Inlet500 x 300mm Hinged topcheck Motor15 kW, 380 Volt MaterialMild steel General Type400/ELR No.33.0441.85 Mounted on framecheck With switchgear(as is) Floorspace1,9 x 1,2 m Total height2,2 m Weight1300 kg Extra Specifications- OVERHAULED -Sieves included: 10 mm, 12 mm, 16 mmPowdered foodsStarchRubberSpicesPlastic & polymersCatalysts & fillersDiscountE-waste & metalSugarPlastic & rubberMinerals & inorganicGranulatorsTriaIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > StarchIndustries > Chemical > RubberIndustries > Food & Feed > SpicesIndustries > Chemical > Plastic ...

Power supply unit, DIN rail -360 W, 24 V/1 5 A -Power supply output type: Fixed/Adjustable -AC input voltage: 85 V to 132 V, 187 V to 264 V. -Number of output channels: 1 -Nominal output voltage: 24 V -Output current max.: 15 A -Power output max.: 360 W -SVHC: No SVHC (19-Dec-2012) -Areas of application: Industrial -External width: 80 mm -Width: 80 mm -Input voltage change: 0.5 % -Frequency input-: 63 Hz -Frequency supply max.: 63 Hz -Power supply unit -Frequency supply min.: 47 Hz -Weight: 1.1 kg -Height: 125 mm -Load change: 0.5 % -Length: 125 mm -Length outside-: 125 mm -Mounting: DIN rail -Rated power: 360 W -Voltage output: 24 V -Voltage output max.: 28 V -Voltage output min.: 24 V -Current output: 15 A -Power supply type: switch mode -Depth outside: 125 mm -Supply voltage: 264 V -Supply voltage max.: 264 V -Supply voltage min.: 85 V

Material Name: SS 430 Former Holder Track (In Oven) Material Brand: Generic Model: Former Holder Track Material Type: Fabricated oven track / guide rail Material Specification: Fabricated oven track / guide rail PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

Inv. Num. : 9160 Type: Trumatic 500R Producer: Trumpf Created: 2003 Parameters: Compressive force: 22 t

CNC hydraulic press brake Type: TruBend 5130 Manufacturer: Trumpf Year: 2007 Controled axis: X,R,Z1,Z2,Y1,Y2 Pressing force: 130 t Working length: 3000 Stroke: 445 mm Working pressure: 300 bar Machine weight: 10900 kg In good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

-Striebig -Standard II TRK, 5220 A -Year: 1998 -No.: 28351 -was acquired refurbished! Shipping available on request. Sale only to tradespeople. Stated purchase price = Net plus 19% VAT = €13,708.80 Gross

Bread slicer Treif Diskus 400 Year of Make: 2007 Cutting without oil One-button operating system Areas of application: Crafts, commercial kitchens, supermarkets, bakery branches Dimensions (LxWxH): 800x700x1100 mm Weight: 195 kg Max. insertion length: 400 mm Disc thickness 4-24 mm Max. insertion cross-section (WxH): 330x150 mm Max. 130 sections per min

Waste-Box Collector, Waste Collector, Blower, Fan, Filter System, Radial Fan, Dust Extraction Blower, Fan, Extraction, Dust Blower -Dust extraction blower: with filter gases -Monitoring device: for the amount and quality of waste in the waste suction system -for sampling: on teasels or cleaners -Motor power: 2.2 kW -Speed: rpm -Inlet connection: 1x Ø 300 mm, 2x Ø 100 mm -Dimensions: 1200/800/H1700 mm -Weight: 248 kg

Trima K2 bread roll line with compact proofer G2-3 Suitable for round, long-rolled, folded and flattened products, e.g.: hamburger, hot dog, mini baguette Dough divider and rounder K2 (YOC 2014) Digital adjustment of weight adjustment, effective room height adjustment, effective speed and effective time Dough hopper capacity 25 kg with feed belts Flour for dough hoppers, moulding chambers and spreader belts Manual pressing pressure adjustment for different types of dough Weight range: 25-95g / 50-150g With footswitch Touchscreen control with recipe memory Power: max. 3,200

Colchester triumph 2500 variable speed for sale. 50” long bed, gap bed, metric, quick change dickson toolpost, 3 jaw chuck, DRO, 6 position carriage stop, rear tool post cross slide. Direct from workshop clearance. Has been tested and seems to run fine in all gears and variable speeds, screw cutting, cross and longitudinal traverse. Moves smoothly along the bed and cross slide .

Tool monitoring, thread cutting without compensating chuck, main spindle: spindle bore: 36mm, max. speed: 6300rpm, drive power: AC 6.7/10.7kW, C-axis, Hainbuch change parts, installation aid base body, Hainbuch manual changing device, counter spindle: counter spindle as motor spindle, C-axis, device for counter clamping pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool carrier, driven tools, electronic gearbox, X3 cross axis for front attachment, 5-position front attachment and cut-off side machining station with driven tools, machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece discharge device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36, coolant lubrication system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining station, Knoll VRF 150/750 vacuum rotary filter (su ...

Features: 1) KUKA KR 30 HA industrial robot, max. reach: 2033mm, rated payload: 30kg, max. additional load arm + wrist: 35kg, max. total load: 65kg, number of axes: 6, position repeatability: +/-0.05mm, path repeatability: +/-0.16mm, operating temperature: 10-55°C, protection class: IP64, IP65 (central hand), connected load: 7.3kVA, robot installation area: 850x950mm, weight: 665kg, 2) Trumpf TruDisk 8002 (6000) laser source, connected load: 39/40kVA, laser type: ND:YAG laser, weight: 2t, 3) KLH L 36.HL22 cooling unit, rated voltage: 3x 400V, refrigerant: R407c, refrigerant charge: 18kg, permissible operating pressure: 25bar, max. operating current: 31A, 4) filter unit. An on-site inspection is possible.

Transnorm belt conveyor GF 26000-1000-900 RA2510 Technical data: Conveyor length (NL): 26000 mm frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 26000 Nominal / outside width in mm: 1000 Belt width in mm: 900 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 2,2 Conveyor speed m / s: 0,2 scope of d ...

Manufacturer: Traub Model: TNK 36 Year of Manufacture: 2003 Operating Hours: approx. 124,705 h (as of May 2026) Total Connected Power: 33 kW Voltage: 400 V / 50 Hz Condition: No known defects. Available for live demonstration. CNC Control - Control: TX8i (64-bit) - Screen: 10.4 inch flat panel display - Interface: V24 RS232 in control cabinet - MDE Interface: Machine running / piece counter - Tool monitoring included - Thread cutting without compensation chuck - Programming: At machine control or via WinFlex IPS software on PC Main Spindle - Spindle Bar Capacity: 36 mm - Max. Speed: 6,300 rpm - Drive Power: AC 6.7 / 10.7 kW - C-axis included - Hainbuch collet chuck system (manual change device included) Counter Spindle - Motor spindle with C-axis - Counter-clamping pressure device - Workpiece ejector - Hainbuch Axfix collet chuck - Upper tool carrier with driven tools and ele ...