tr used for sale

General SKU269W392 LocationBarneveld CEcheck MakeSatorius Stedim Systems Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity500 l Sizes800 x1200 x 1200 mm Flat topcheck With covercheck MaterialStainless steel 1.4307 (304L) With jacketcheck General TypeFXC106609 Year of construction2021 Mounted on framecheck Mounted on wheelscheck Floorspace0,8 x 1,2 m Total height1,2 m Weight200 kg Extra SpecificationsNew, unused item.The item is delivered in its original packaging (kit).Paints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.SilosSugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicSartorius Stedim SystemsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIn ...

General SKU354T1034 LocationBarneveld MakeKtron Main Features MaterialStainless steel Motor1.1 KW Inlet diameter370 mm Specified Features - Metering screw Metering screwcheck Screw diameter42mm Pitch31mm Screw length700 With hoppercheck Hopper sizes370x370x370 Inlet370x370mm Outlet44mm With motorcheck With DC motor0,55kW, 180Volt, 1800rpm With breaking/mixing shaftcheck Motor0,37kW, 220/380Volt, 1390rpm Metering screws MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) General TypeS-400 No.240-739 Year of constructionunknown Mounted on framecheck With switchgear(as is) Floorspace1,15x0,65m Total height1,8m Weight200kg Extra Specificationsktron features additional transport/mixing screw.screw Dia: 77mmscrew Dia: 50mmscrew Length: 480mmscrew Shaft Dia: 22mmproduct Exhaust: 80x80mmmotor data: 1.1kW, 220/380Volt, 2820rpmpropeller is equipped  ...

General SKU269W391 LocationBarneveld CEcheck MakeSatorius Stedim Systems Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity500 l Sizes800 x1200 x 1200 mm Flat topcheck With covercheck MaterialStainless steel 1.4307 (304L) With jacketcheck General TypeFXC106609 Year of construction2021 Mounted on framecheck Mounted on wheelscheck Floorspace0,8 x 1,2 m Total height1,2 m Weight200 kg Extra SpecificationsNew, unused item.The item is delivered in its original packaging (kit).Paints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.SilosSugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicSartorius Stedim SystemsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIn ...

General SKU250W324 LocationBarneveld CEcheck MakeSatorius Stedim Systems Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity500 Ltr. Sizes800 x1200 x 1200 mm Flat topcheck With covercheck MaterialStainless steel 1.4307 (304L) With jacketcheck General TypeFXC106609 Year of construction2021 Mounted on framecheck Mounted on wheelscheck Floorspace0,8 x 1,2 m Total height1,2 m Weight200 kg Extra Specifications- New, unused itemPaints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.SilosSugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicSartorius Stedim SystemsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > OintmentsIndustries >  ...

General SKU446W1481 LocationBarneveld CEcheck MakePink Wertheim GmbH Themosysteme Pressure Working pressure0.1 Bar Vacuum possiblecheck Working pressure trays4 Bar Main Features MaterialHastelloy Volume350 Ltr. Surface2.53 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housing1.4301 Heating surface2,53 m2 Max. temperature95°C Number of trays6 Tray sizes650 x 650 mm Distance between the trays120 mm With 1 doorcheck Connectionscheck MaterialStainless steel 2.4602 (Hastelloy C-22) General TypeWSD 650-650-129-6 Machine number2002 4712 Year of construction2002 Mounted on framecheck Floorspace1,20 x 1,70 m Total height1,90 m Weight1060 kg Extra SpecificationsWith QVF glass condensor bowl, volume 7 l.&:nbsp:Paints & coatingsPowdered foodsGeneric medicinesTray dryersTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyAgrochemica ...

General SKU379W1588 LocationBarneveld CEcheck MakeTrivac Main Features MaterialStainless steel Volume65000 Ltr. Motor2.2 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:1 Capacity65 m³/h With motor2,2 kW, 230/400 volt, 1390/1695 rpm MaterialStainless steel General TypeD65B Mach.No.11296 20200007866 Year of construction2005 Floorspace0,80x0,40 m Total height0,40 m Weight90 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherVacuum pumpsSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals ...

General SKU397X1088 LocationBarneveld CEcheck MakeLauda Main Features Heating (medium)Oil Capacity6 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Thermal oil heatercheck Water heatercheck Heating medium:Steam / Water Heating capacity6 kW With cooling(Cooling and Deep Cooling) Temperature-30/200 °C Tank capacity120 Ltr. With pumpcheck Capacity10 m³/h Motor5.5 kW With temperature controller(PID controller - as is) MaterialStainless steel 1.4301 (304) General TypeTR400HKK Mach.No.B 16329 Year of construction2003 Mounted on framecheck Floorspace2,27 x 0,98 m Total height2,52 m Weight1540 kg Extra SpecificationsHeating&:nbsp: Type of primary energy: Steam Transfer area (heat exchanger): 4 m² Connections: DN25 / DN50 &:nbsp: Cooling (K) Type of primary energy: Cooling water Transfer area (heat exchanger): 4 m² Type of ...

Adjusting nut for die-casting machine IDRA2500, TR300x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr300x10, D450x345mm high. 240kg Adjusting nut for die casting machine IDRA 2500 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Key data: 3000 mm

Used machine in good condition. Available for immediate delivery. - Laser type: CO2 - Working area (X x Y x Z): 3,000 x 1,500 x 115 mm - Max. working weight: 900 kg - Positioning speed X / Y: 200 m/min - Simultaneous positioning speed: 300 X+Y m/min - Laser power: 6 kW - Thickness of the iron max: 25 mm - Thickness of stainless steel max: 25 mm - Thickness of the aluminium max: 15 mm - TRUMPF Liftmaster loading and unloading unit (Liftmaster currently not installed)

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D500x315mm high. Approx. 230kg Tie bar expansion nut for die casting machine IDRA 3300. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

General SKU381X955 LocationBarneveld MakeK-Tron TypeK-T-80 Main Features MaterialStainless steel Motor2 KW Inlet diameter300 mm Specified Features - Metering screw Metering screw(Twin-Screw Feeder) Screw diameter80 mm Pitch50 mm Shaft diameter40 mm Screw length700 mm With hopper(± 460 Ltr.) Hopper sizesø 1000 x 1650 mm (500 mm CON) Inlet180 mm Outlet180 mm With DC motor2kW With jacketcheck Metering screws MaterialStainless steel 1.4301 (304) General No.0708592 Floorspace1,6 x 0,55 m Total height2 m Weight150 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsMetering screwsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySo ...

Manufacturer: Trumpf Model: TruLaser 5030 Year of Manufacture: 2010 Operating hours: 57,876 h Known defects: Collision protection; cutting unit cannot be pushed back into the correct position; repair or replacement is necessary. It includes also a Liftmaster : Year of manufacture: 2015 (retrofitted) Operating hours: almost none Known defects: none Find more here - .ucymachines/ Contact us at - sales@ucymachines

General SKU409X1232 MakeBeltron LocationBarneveld CEcheck TypeUV-Trockner BE 20 / 120 W / II Dimensions Belt width220 mm Belt length1050 mm General No.0130128 Year of construction2018 Mounted on mild steel frameand wheels With switchcheck Floorspace1,10x1,10 m Total height1,37 m Weight150 kg Extra SpecificationsType:&:nbsp:UV continuous conveyor dryerLamp type:&:nbsp:2 × medium-pressure mercury lampsLamp power:&:nbsp:Max. 120 W/cmConveyor speed:&:nbsp:0.5 – 12 m/min (variable) (motor: 5 kW)Adjustable lamp height:&:nbsp:20 – 150 mmCooling:&:nbsp:Forced-air, central exhaust fanOperating temperature:&:nbsp:19 – 23 °CExhaust connection:&:nbsp:To outdoor vent, max. 7 m ductAdditional information:Siemens touchscreen control, type&:nbsp:Simatic HMIExhaust fan:&:nbsp:0.14 kW,&:nbsp:2550 rpm, airflow&:nbsp:10.1 m³/minConsumer wastePowdered foodsGeneric medicinesStarchAg ...

General SKU394U1134 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Thermal oil heaterTherminol D12 Heating medium:Oil Electric capacity12.9 kW, 400 volt (Ex) Temperature-40°C/+200°C With pump(2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2880 rpm (EX) (2x) MaterialStainless steel 1.4571 (316Ti) General TypeTR 400 HKT/KT-EX Mach.No.HKS08032 Year of construction2008 Floorspace1,75x1,0 m Total height2,5 m Weight1800 kg ATEX designedcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsTemperature  ...

Universal CNC lathe INDEX G 400 RATIO Line Hersteller [manufacturer]: INDEX Type [ type]: G 400 Control unit: Siemens C200-4D incl. milling of cylindrical tracks Incl. handwheel Baujahr[construction year]: 10/2004 Turning length 1250 Main spindle D102 with swing-in gear 1700 Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE TOOL CARRIER 1 COMPL. AXES X,Y,Z,B with turning/milling operation Disc turret VDI40 10 stations MILLING SPINDLE HSK A63 Tool carrier axles 2 XZ Disc turret VDI40 10 stations SUB-SPINDLE D102 DIRECT DRIVE 1300Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE DISC MAGAZINE ON THE LEFT OF THE HSK63 SINGLE-SWING GEARBOX WITH 32 TOOL HOLDERS DISC MAGAZINE RIGHT COMPL. M.32 TOOL HOLDERS HSK 63A Travel path: X= 320mm Z=1250mm Displacement measuring system X-axis glass mast. (abs) Fe ...

General SKU394U1129 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity300 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Thermal oil heaterTherminol D12 Heating medium:Oil Heating capacity300 kW Electric capacity306,45 kW, 400 volt (ex) Temperature-40°C/+200°C With pumpcheck Capacityunknown Motor5,5 kW, 400/690 Volt, 2880 rpm (EX) MaterialStainless steel 1.4571 (316Ti) General TypeTR400 HHKT-EX Mach.No.HKS08020 Year of construction2008 Floorspace2,15x1,0 m Total height2,50 m ATEX designedcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Ot ...

weight: 280 kg width: 930 mm depth: 560 mm height: 1840 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately.

Used Trane FVCP06CWQ5R2WWBVWW fancoil unit on Glycol. The unit can be used for cooling and heating. Dimensions: 1410x240x560 mm (LxWxH). The fancoil unit has a cooling capacity of 4,8 kW at the following temperatures - air inlet temperature: 26°C & water inlet/outlet temperature: +7°C/+12°C. Trane FVC units are often used in: Apartments / Residential buildings Hotel rooms Offices / small workplaces Bedrooms / living rooms

Spindle bore: 42mm, max. workpiece diameter: 115mm, speed: 3150rpm, power: 9kW, bar length: 5200mm. Machine dimensions X/Y: approx. 2100mm/1000mm, weight: approx. 1500kg. Including bar feeder Stamag D 5000 and various accessories such as collets and feed collets. Documentation available. An on site inspection is possible.

Transnorm Belt conveyor 1880-400-300 RA1391 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1996 Condition: good (used) Motor: fully functional conveyor length (FL): 1880 mm nominal / external width (NB): 400 mm belt width (GB): 300 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 1.05m/s, adjustable conveying speed with frequency converter also possible at extra cost Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1996 condition: good (used) Conveying length in mm: 1880 Nominal / outside width in mm: 400 Belt width in mm: 300 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,10 scope of delivery: without supports and side guides For individual, professional advice, simply get in to ...

Two gravimetric belt weighfeeders K-Tron are available. Load cell measuring range: 60N, belt width: 300mm, throughput: 650kg/h, max. grain size: 10mm. Machine dimensions X/Y/Z: approx. 1400mm/750mm/450mm, weight: approx. 150kg. The machine control was overhauled recently. Documentation available. An on-site inspection is possible.

Transnorm belt curve conveyor left GKF 180°-1270-1100-IR1200 -- NEW RA1945 Technical data: Conveying length middle radius (NL): 5498 mm Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 1200 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 180° Driven ...

2 pieces of rotating bezels for TRENS SUI 80

Key data: 400 mm, 400 mm

1 Fixed stick/steady rest with roller quills for SUI 80 As good as new 400 mm passage

Year of construction 2015, 400V / 50 Hz, 3PE, 10 A, incl. cutting board, several spare tee knives, >20 gang knives, creel 18 x 18, 45 x 45, see pictures, Cutting chamber 96 x 96 x 550, Capacity: up to 1.4 t/h

Transnorm belt curve conveyor right GKF 90°-810-600 IR600 RA1804 Technical data: Type designation: Belt curve conveyor TS 1500-100 Frame width (NB): 810 mm belt width (GuB): 600 mm height (BH): 330 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: KT58 Year of construction: 1990 Optionally available: Supports Side guide one and both sides Frequency converter for stepless speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1990 condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 810 Belt width in mm: 600 angle: 90° Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 scope of delivery: without supports and side guid ...

Double T beam / I 260 profile / crane rail 6 beams available, each approx. 10 meters long Price per carrier 500 Euro net Weight per carrier is approx. 500 kg I 260 Profiles with square solid material welded on it ( 4 x 3 cm ) Shipping available for an extra charge VAT can be declared

Transtherm Industrial Table Cooler / Radiator for Generators – TD90W/HC – For Sale Upgrade your generator cooling capabilities with this robust Transtherm TD90W/HC table cooler, engineered for high-demand industrial applications. Designed and manufactured in the UK, this heavy-duty cooling unit delivers reliable thermal management, ensuring consistent generator performance under continuous or peak load. Any high-demand application needing reliable water-cooled radiator. This TD90W/HC unit is solidly built, reputable, and ready for immediate integration into your generator cooling system. A dependable piece of equipment from a leading UK cooling systems manufacturer. Key Specifications Manufacturer: Transtherm Cooling Industries Ltd Model: TD90W/HC Serial Number: C53911B Date of Manufacture: 13/08/14 Supply Voltage: 380–420V / 50Hz / 3-Phase Maximum Curre ...

Transtherm Industrial Table Cooler / Radiator for Generators – For Sale Boost the performance and reliability of your power generation setup with this high-quality Transtherm Cooling Industries table cooler, engineered for demanding industrial environments. Built in the UK and trusted worldwide, this unit provides efficient cooling for generator systems, ensuring stable operation even under heavy load. Any site requiring stable, heavy-duty cooling solutions This Transtherm table cooler is in solid condition and ready for integration into your generator system. A dependable, proven unit from a reputable manufacturer Key Specifications Manufacturer: Transtherm Cooling Industries Ltd Model: TD80WHA Serial Number: CE53911A Date of Manufacture: 13/08/2014 Supply Voltage: 380–420V / 50Hz / 3-Phase Maximum Current: 27 A Maximum Water Temperature: 110°C  ...

A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/ ...

Source: TruPulse 124 Wavelength of the laser light:1064 nm Maximum average power:140 W Minimum pulse output:300 W Maximum pulse output:6 kW Minimum pulse duration:0.3 ms Maximum pulse duration:50 ms Maximum pulse energy:30 years Maximum pulse repetition rate:833 Hz Beam parameter product:16 mm-mradX-axis:450 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmY-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.1 mm Repeatability:± 0.02 mm Z-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmRotary axis Turntable:120 mm Free inner diameter:45 mm Maximum speed:80 rpm Diameter of three-jaw chuck:80 mm Central passageways:16 mmClamping range, inside:2-71 mm Clamping range, outside:22-69 mm

Offer 25514 Specifications: - Max. working length 3060 mm - Column passage 2690 mm - Max. pressing force 1300 kN - Max. distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to. 11 mm/sec - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2700 x D 2400 mm - Weight approx. 11500 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Upper + Lower Tool Clamping - Die table displacement pneumatically supported

Cutting length: 4.300 mm Cutting height: 2.200 mm Cutting depth: 80 mm output: 4,4 kw saw blade diameter: 300 mm turning speeds: 4.750 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Silo plant Tropper, consisting of 3 pcs. with usable capacity 40 m³ and 1 pc. 33 m³. Disassembly by the buyer. Condition Top, as it is set up indoors.

A total of 4 linear guides, unused, complete and in original condition. Material number trump 1410234. To hand over spare parts due to the purchase of a new machine. Net price trump / piece 3040€. Immediately available.

Transnorm conveyor belt GF 6800-600-500 RA2446 Technical data: Conveyor length (NL): 6800 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstat ...

Transnorm conveyor belt GF 6100-600-500 RA2447 Technical data: Conveyor length (NL): 6100 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.8 m/s Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6100 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s: 0,8 scope of delivery ...

Transnorm conveyor belt GF 14200-600-500 RA2445 Technical data: Conveyor length (NL): 14200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 14200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstat ...

Transnorm conveyor belt GF 7200-600-500 RA2448 Technical data: Conveyor length (NL): 7200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 7200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstat ...

Transnorm conveyor belt GF 13900-600-500 RA2450 Technical data: Conveyor length (NL): 13900 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Small 25mm pulley for low-gap transfer Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 13900 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW ...

Transnorm Rising falling Incline with forerun belt conveyor GF 6000+800-600-500 RA2449 Technical data: Conveyor length (NL): 6800 mm (800 mm forerun + 6000 mm incline) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R27 DT80N4/BMG/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 ( 6000 + 800 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eu ...

-Manufacturer: Trotec - Model: Speedy100c-8063 -Date of manufacture: August 2022 -Serial number: S1-7145 -45 watts CO2 -230 V -50 Hz -with autofocus -with air conditioning - with 2.0" lens -with cutting table 12.7 mm -with performance upgrade -with X-axis with 2 carriages -Rulers in mm incl.: -Suction -Manufacturer: Aigner/Trotec -Model: 8401 Atmos Cube Speedy 230 V - Serial number: 01732-18928 -8247 Exhaust Connection Cable -Suction operating hours: approx. 1639h Shipping available on request. Sale only to tradespeople.

Transnorm Rising falling Incline belt conveyor with leading belt GF 5800+1000-600-600 RA2454 Technical data: Conveyor length (NL): 6800 mm ( 5800 mm riser segment + 1000 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 ( 5800 + 1000 ) Nominal / outside width in mm: 600 Belt width in mm ...

Transnorm conveyor belt GF 15683-600-500 RA2452 Technical data: Conveyor length (NL): 15683 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, R27 DRE80M4/MM15/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 15683 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s: 0,25 scope of d ...

Transnorm conveyor belt GF 6920-600-500 RA2453 Technical data: Conveyor length (NL): 6920 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.35 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6920 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s: 0,35 scope of delivery: without sup ...

TRUMPF TruLaser 5040 6kW laser cutting machine was built in 2012 in Germany by TRUMPF Maschinen Grüsch AG. The machine has been continuously serviced, upgraded and maintained throughout its service life. A set of quartz tubes, all internal optics and the lamp were replaced in September 2022. A cleaning and calibration of the external optics, meanwhile, was performed in September 2025. All filters and oils were changed on an ongoing basis according to TRUMPF recommendations. Water was changed once a year, along with flushing of the CU and AL circuits. All these activities are confirmed by the corresponding service reports. The TRUMPF TruLaser 5040 (L18) laser cutting machine is the perfect choice for any industrial plant. It enables precision cutting of sheet metal made from, among others, steel, aluminium, copper and brass. Laser cutting is performed by means of a stable 6 kW laser b ...

Treif Piccolo Bacon Slicer, Type 1304, with 3 pairs of creels and 1 empty frame, plus a new cutting blade, Connection 400V, dimensions LxWxH approx. 105x60x100cm, Year of manufacture 1989, good used condition, fully functional

- Bread slicer bread gate - Manufacturer: Treif Maschinenbau GmbH - Model: Delfin - Year of construction: 2005 - Operating voltage: 230 volts - Rated current of the machine: 2.5 - Nominal power: 0.9 kW - Weight: 175 kg