tr used for sale

Three-phase oil transformer DIN 42500 The four impellers/ wheels are also exist and included the external dimensions are approx. Width 1.4 m Length 2.2 m Height to top edge of LV connection bolt 2.0 m Hermetic version with DGPT2 and Euromold plug connections Find more here - /

Model: DOTR 63000/123 Rated Power: 50 / 63 MVA High Voltage (HV): 115 kV High Voltage Tapping Range: +9 / -9 x 1.778% (adjustable under load) Insulation Level HV: 123/550/230 kV Low Voltage (LV): 31.5 kV Insulation Level LV: 36/170/70 kV Tertiary Voltage: 6 kV Insulation Level TW: 12/75/28 kV Frequency: 50 Hz Vector Group: Yynyn0(d) Cooling Method: ONAN / ONAF Maximum Oil Temperature Rise: 60 K Maximum Winding Temperature Rise: 65 K Ambient Temperature Range: -25°C to 40°C Impedance: - At 50 MVA: 15.8% (± IEC-Tolerance) - At 63 MVA: 21% (±7.5%) No-Load Losses: 12.5 kW (+IEC-Tolerance) Load Losses at 50 MVA: 154 kW (+IEC-Tolerance) Noise Power Level at ONAF (No Load): 80 dB(A) Weight Details: - Shipping Weight: Approx. 87,500 kg - Weight of Oil: Approx. 15,300 kg - Active Part: Approx. 58,500 kg - Total Weight: Approx. 89,800 kg Dimensions: - Shipping Dimensions ...

2020 Neumaier Industry Factory Train FT830 Route tugger train. DESCRIPTION: The object of realisation is a Factory Train FT830 tugger train from the company Neumaier Industry Description: - The tugger train was only used a few times / year of construction 2020 - Unladen weight 3578 kg / permissible total weight 7178 kg - Payload 3600 kg / 1800 kg per wagon unit on 3 pallets or transport trolleys - Length 10.8 m, width 1.6 m, height 2.3 m - Active steering system - Electronic braking system Main components: - FT830 initial module - EV6 frame Goods carrier - Main module FT830 - EV6 frame product carrier - End module FT830 Current condition / photo documentation: Find more here - / Contact us at -

5 s/s smoke trolleys for salmon, 15 floors, floor dimensions: (15x) 870 mm x 1000 mm, distance between floors: 100 mm, total dimensions: (6x) 1000 mm x 940 mm x 200 mm.

AFS Corona Pre-Treatment system Type (Typ): G 60 M Input (Eingang): - Voltage (V): 400 - Current (A): 16 - Frequency (Hz): 50/60 Output (Ausgang): - Power (W): 6000 Technical Data Roller Width: 2700 mm Electrode Width: 2500 mm Maximum Mechanical Speed: 250 m/min Maximum Generator Power: 6 kW / 1 & 5 Core Operation Electrode Type: Ceramic Electrodes Discharge Roller: Ceramic Roller Drive Type: Driven Discharge Roller Cooling Type: Water-cooled Pre-treatment Direction: Controllable via web path Pressure Rollers: Present on both sides Find more here - / Contact us at -

Manufacturer: Green Transfo Type: Minera MP Year of manufacture: 2024, unused Number of units available: 9 pieces Rated power: 7000 kVA Rated voltage: 30 / 0.72 kV

2. Other and Auxiliary Systems SNA-17. Transformer Systems, Room K 14, Transformer 2 units Cast Resin Dry-Type Transformer Type GEAFOL TG 4951H, Built: 1990 Manufacturer: AEG Trafo Union Technical Data: - 800 kVA - Voltage level 10 kV / 0.4 kV - Dyn 5 Find more here - / Contact us at -

description: High quality control unit for pallet conveyors of a 50.000 bph filling line with several KHS control units For a total of frequency controlled drives, diverse protective switch drives /see photos for details) Switchboard with 2 pieces The Danfoss inverters are overhauled and can be commissioned without concern. The software might be added as well. An andaptation to your project can be also offered Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept.  ...

Oil-Insulated Power Transformers for Sale Manufacturer: Brown Boveri Model: TRFKa 1350/30 Power Rating: 1350 kVA High Voltage: - 26.25 kV (Middle position) - 27.56 kV (Position 1) - 24.93 kV (Position 5) Low Voltage: 6.3 kV Current Rating: - High Voltage: 29.7 A (Middle position) - Low Voltage: 124 A Frequency: 50 Hz Cooling: ONAN Year of Manufacture: 1972 Status: In operation until March 2025 Notable Condition: High CO levels and water content; oil drying and treatment recommended. Find more here - / Contact us at -

Inline Tray Sealer Make: MPE Model: I0 Built 2017 Stainless steel Mould set: D2: 195 X 154MM 16 Cycles min, Gas facility

- 10-STATION HORIZONTAL AXIS ROTARY TABLE, - bar max. Ø 60 mm;, - workpiece length max. 220 mm., - barr length max. 6.000 mm

Semiautomatic tray sealer for modified atmosphere packaging. Before sealing the tray with foil, a gas flushing device replace the current atmosphere inside the tray by a gas mixture and/or vacuum. The packaging machine can be equipped with a skin vacuum module (at a surcharge). The AMTEC tray sealer is particularly interesting for products from the food industry, as the modified atmosphere ensures that the food remains fresh and has a longer shelf life. Ribbon printer for BBD or batch number included in the price. PLC from OMRON, touch screen from WEINVIEW, servo motors from Panasonic, pneumatic valves and cylinders from AIRTAC. - Specifications: 2-lane version for handling 2 trays, (at extra charge handling of 4 or 6 trays per cycle possible) | chamber size: L450xW(200-600)mm, multi-tray processing possible within the range (at a surcharge) | max. cycle of the machine in neutral: 12 cyc ...

Automatic tray sealer incl. gas flushing module for modified atmosphere packaging (MAP). Before sealing the tray with foil, a gas flushing device replace the current atmosphere inside the tray by a gas mixture and/or vacuum. The packaging machine can be equipped with a skin vacuum module (at a surcharge). The AMTEC tray sealer is particularly interesting for products from the food industry, as the modified atmosphere ensures that the food remains fresh and has a longer shelf life. Ribbon printer for BBD or batch number included in the price. PLC from OMRON, touch screen from WEINVIEW, servo motors from Panasonic, pneumatic valves and cylinders from AIRTAC. - Specifications: 2-lane version | chamber size: L550xW(200-600)mm, multi-tray processing possible within the range (at a surcharge) | max. cycle of the machine in neutral: 12 cycles/min (sealing only) or 5 cycles/min (vacuum/protectiv ...

Semiautomatic tray sealer for modified atmosphere packaging. Before sealing the tray with foil, a gas flushing device replace the current atmosphere inside the tray by a gas mixture and/or vacuum. The packaging machine can be equipped with a skin vacuum module (at a surcharge). The AMTEC tray sealer is particularly interesting for products from the food industry, as the modified atmosphere ensures that the food remains fresh and has a longer shelf life. Ribbon printer for BBD or batch number included in the price. PLC from OMRON, touch screen from WEINVIEW, servo motors from Panasonic, pneumatic valves and cylinders from AIRTAC. - Specifications: 2-lane version for handling 2 trays, (at extra charge handling of 4 or 6 trays per cycle possible) | chamber size: L350xW(100-400)mm, multi-tray processing possible within the range (at a surcharge) | max. cycle of the machine in neutral: 12 cyc ...

Semiautomatic tray sealer for modified atmosphere packaging. Before sealing the tray with foil, a gas flushing device replace the current atmosphere inside the tray by a gas mixture and/or vacuum. The packaging machine can be equipped with a skin vacuum module (at a surcharge). The AMTEC tray sealer is particularly interesting for products from the food industry, as the modified atmosphere ensures that the food remains fresh and has a longer shelf life. Ribbon printer for BBD or batch number included in the price. PLC from OMRON, touch screen from WEINVIEW, servo motors from Panasonic, pneumatic valves and cylinders from AIRTAC. - Specifications: 2-lane version for handling 2 trays, (at extra charge handling of 4 or 6 trays per cycle possible) | chamber size: L450xW(200-400)mm, multi-tray processing possible within the range (at a surcharge) | max. cycle of the machine in neutral: 12 cyc ...

Automatic tray sealer incl. gas flushing module for modified atmosphere packaging (MAP). Before sealing the tray with foil, a gas flushing device replace the current atmosphere inside the tray by a gas mixture and/or vacuum. The packaging machine can be equipped with a skin vacuum module (at a surcharge). The AMTEC tray sealer is particularly interesting for products from the food industry, as the modified atmosphere ensures that the food remains fresh and has a longer shelf life. Ribbon printer for BBD or batch number included in the price. PLC from OMRON, touch screen from WEINVIEW, servo motors from Panasonic, pneumatic valves and cylinders from AIRTAC. - Specifications: 2-lane version | chamber size: L450xW(200-400)mm, multi-tray processing possible within the range (at a surcharge) | max. cycle of the machine in neutral: 12 cycles/min (sealing only) or 5 cycles/min (vacuum/protectiv ...

Automatic tray sealer incl. gas flushing module for modified atmosphere packaging (MAP). Before sealing the tray with foil, a gas flushing device replace the current atmosphere inside the tray by a gas mixture and/or vacuum. The packaging machine can be equipped with a skin vacuum module (at a surcharge). The AMTEC tray sealer is particularly interesting for products from the food industry, as the modified atmosphere ensures that the food remains fresh and has a longer shelf life. Ribbon printer for BBD or batch number included in the price. PLC from OMRON, touch screen from WEINVIEW, servo motors from Panasonic, pneumatic valves and cylinders from AIRTAC. - Specifications: 2-lane version | chamber size: L350xW(100-400)mm, multi-tray processing possible within the range (at a surcharge) | max. cycle of the machine in neutral: 12 cycles/min (sealing only) or 5 cycles/min (vacuum/protectiv ...

Loaded now in Paris 2000 kva transfo year 1993

Type: TRC1500/600 Serial number: 11490-2 Year of construction: 2019 Belt width: 655 mm Transport length: 1500 mm Power: 3 x 400V, 50Hz, 0.37kW Dimensions: 1500 x 1250 x 1450 mm

Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available

Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available

Traction test Avery Denison T42 50 tons low price - ideal for retrofit The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools

Maurer cooking chamber. Twin trolley., 6 trolleys available

A conveyor belt is available for buffering and transferring PCBs between processing systems. Transport height: 870mm-970mm, max. transport width: 460mm, min. PCB dimensions X/Y: 70mm/50mm, max. PCB dimensions X/Y: 460mm/460mm, PCB thickness: 0.5mm-4.5mm, max. PCB weight: 3kg. Machine dimensions X/Y/Z: approx. 1590mm/800mm/925mm, weight: approx. 170kg. Documentation available. On-site inspection is possible.

Manufacturer:Porta Model: TRO-06-N08 Year of Manufacture: 2012 Machine Type: Production Cell with CNC Rotary Transfer Machine Control: Porta Additional Components: - Filter System (Knoll VRF450, 2011) - Chain Conveyor (Knoll) - External Cooling Unit - Mist Extraction System - Workpiece Conveyor - Handling: 3x 6-Axis Robots (ABB) - Cleaning System (Mako) with Filter System - Small Pallet Turner (Mako) Find more here - / Contact us at -

We have the following equipment available for sale immediately. Two FRANCE TRANSFO SCHNEIDER ELECTRIC 1250 kva and 850 kva cast resin dry type voltage converter. years of construction 2003. Transformers they have hood which has been dismantled to facilitate extraction which are available in our warehouse

Transnorm Belt Curve Conveyor left GKF 90°-780-600 IR600 both sides transmission RA2019 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 780 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees support feet: optionally available Conveying speed  ...

Roller conveyors with chains pull 90° RA1847 Type: Transnorm 9900-600-550 Length: FL = 9900 mm Conveyor width: FB = 550 mm Total width: 600 mm The chains off slide width: 700 mm height (BH): 140 mm Support roller pitch: 80 mm including pneumatic stopper Optionally available: Supports: Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: KW: 0,37/S1 Engine type: Bremse, SEW Eurodrive angle: 90° Nominal / outside width in mm: 600 Roll width in mm: 550 Roll division in mm: 80 Bauhöhe in mm (BH): 140 Electric data: 230, 400 Conveying length in mm (NL): 9900 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your te ...

Roller conveyors with chains pull 90° RA1846 Type: Transnorm 3300-600-550 Length: FL = 3300 mm Conveyor width: FB = 550 mm Total width: 600 mm The chains off slide width: 700 mm height (BH): 140 mm Support roller pitch: 80 mm including pneumatic stopper Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: KW: 0,37/S1 Engine type: Bremse, SEW Eurodrive angle: 90° Nominal / outside width in mm: 600 Roll width in mm: 550 Roll division in mm: 80 Conveying length in mm (NL): 3300 Bauhöhe in mm (BH): 140 Electric data: 230, 400 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your tea ...

(1995) FJELLMAN Trimming Press Manufacturer: Fjellman Year of Manufacture: 1995 Press Force: 750 kN Opening Height: 1600 mm Number of Cylinders: 1 - Stroke Length: 1300mm - Diameter: 220/125 mm

- Standard model - for right side unloading - with existing accessories

Incl. 3 buckets, 1x 80 cm with teeth, 1x 60 cm, 1x 30 cm, suitable for JCB 3CX

A tray packaging machine Monidin is available. Tray dimensions X/Y: 340mm/280mm, film width: 270mm, performance: 4-5 cycles/min, vacuum pump: Busch R5, pump capacity: 300m³/h, material: stainless steel, packaging type: MAP (Modified Atmosphere Packaging). Machine dimensions X/Y/Z: approx. 3300mm/900mm/2000mm, control: Siemens PLC. Tooling equipment: 2-impression MAP tool for 1825 trays (250mm/180mm) and 1-impression MAP tool for 2427 trays (240mm/270mm). Documentation available. An on-site inspection is possible.

Deze trekwerk zaag van ons gerenommeerde merk SICA S.p.a. staat bij Plastima Used Machinery in de machine opslag. De zaag komt uit 2003 en verkeert in gebruikte, maar goede staat. Brand: SICA S.p.A. Bwo Ud Dvstphp Ioycew Model: TRS/U 110-800 Year of construction: 2003 Power: 5.5 kW Pipe outer diameter max: 110 up to 800 mm

TRANSFORMER FRANCE TRANSFO 6500 kVA For sale: 6,500 kVA STEP-UP TRANSFORMER – FRANCE TRANSFO (Schneider Group) Available immediately – Pick-up EXW France ✅ Key features Brand: France Transfo – Schneider Group Type: Step-Up Transformer Power: 6,500 kVA Year: 1999 Standard: NFC 52-100 Coupling: Yd11 Supply voltage / secondary voltage: Several positions displayed: pos 1 : 16,267 V pos 2: 15,890 V pos 3: 15,483 V (Exact range visible on plate) Frequency: 50 Hz Short Circuit Voltage: 8.17% HV insulation: 95/38 kV LV insulation: 60/2 kV Current rating: 895.7 A Windings: Copper Cooling: ONAN (oil) Dielectric: Oil

General SKU397M493 LocationBarneveld MakePentavac srl TypePENTA 2100 No.820 Year of construction2001 Specified Features - Transwrap machine Transwrap machineSealer and filler Contact parts stainless steelcheck With dosingcheck MakeOMAS Technoistemi TypeDEL 1 No.0107011 Year of construction2001 Contact parts stainless steelcheck Information Mounted on framecheck With switchgearcheck Floorspace1,5x1,2 M Total height2,1 M Weight500 KGTranswrap machinesPentavacPackaging machines > Transwrap machinesBrand > Pentavac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU300U1003 LocationBarneveld MakeCI Electronics Type195/36 Sade P2 No.TP595 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Floorspace0,80x0,65 m CEcheck Total height1,37 m Weight70 kg Extra SpecificationsTablet/capsule weight sorter, capacity: 5-2000 milligrams, processing 55 tablets/capsules per minute.Miscellaneous transportCI ElectronicsConveying systems > Miscellaneous transportBrand > CI Electronics What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0155 LocationBarneveld MakePink GmbH Thermosysteme Wertheim (DE) TypeVSD-e 300-300-120-2 Machine number2008 4823 Pressure Working pressure0.1 Bar Vacuum possiblecheck Main Features MaterialHastelloy Volume35 Ltr. Surface0.18 m2 Specified Features - Tray dryer Tray dryervacuum Stainless steel housingcheck Stainless steel trayscheck Heating surface0.18 m2 Drying chamber capacity35 Ltr Max. temperature150 degr. C Number of trays2 Tray sizes300x300mm Distance between the trays120mm Max. temperature150 degr.C. With 1 doorcheck Connection for the vacuum pumpDN25 Connections(2x) DN10 Without vacuum pumpcheck MaterialStainless steel 2.4602 (Hastelloy C-22) Information Year of construction2008 Mounted on framecheck With switchgearcheck Floorspace2.2x1,0 M CEcheck Total height2,4 M Weight1150 Kg Extra Specificationsin Pink Isolator, Type ISO 1900-7 ...

General SKU446W1481 LocationBarneveld MakePink Wertheim GmbH Themosysteme TypeWSD 650-650-129-6 Machine number2002 4712 Pressure Working pressure0.1 Bar Vacuum possiblecheck Working pressure trays4 Bar Main Features MaterialHastelloy Volume350 Ltr. Surface2.53 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housing1.4301 Heating surface2,53 m2 Max. temperature95°C Number of trays6 Tray sizes650 x 650 mm Distance between the trays120 mm With 1 doorcheck Connectionscheck MaterialStainless steel 2.4602 (Hastelloy C-22) Information Year of construction2002 Mounted on framecheck Floorspace1,20 x 1,70 m CEcheck Total height1,90 m Weight1060 kg Extra SpecificationsWith QVF glass condensor bowl, volume 7 l. :Tray dryersPink WertheimDryers > Tray dryersBrand > Pink Wertheim What you can expect from Foeth: -- Machine is in working condition --  ...

Split nut for Idra 2500 die casting machine, TR300x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Split nut, Tr300x10, 2x550x250x285mm high. Approx. 540kg With sliding bushes The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

transformator 5200kva 10.000 volt primair 400 volt secundair 50hz year 2006 7500Ampere DYN5 total weight 12.135kg transformer located in our yard: Kranenpool 10 6443VA Brunssum NL

table shows the previous factory settings, the machine remains flexible for other layouts and product formats.

Packaging of bottles or similarly shaped products in cardboard trays or shrink packs (depending on the configuration). Ideal for use in production lines for beverages, food or pharmaceuticals. Working principle : Tray packaging / outer packaging Capacity : 17 cartons per minute Control System :Siemens S7 PLC

General SKU422U1327 LocationBarneveld MakeBucher Guyer AG Pressure Vacuum possiblecheck Working pressure trays2 Bar Main Features MaterialStainless steel Volume5000 Ltr. Surface30 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface30m² Drying chamber capacity5 m3 Drying chamber sizes1991x2080x1420 mm Max. temperature110°C With jacketcheck Max. temperature100°C Number of trays11 Tray sizes1550x2000 mm Distance between the trays100 mm With 2 doorscheck Connection for the vacuum pumpcheck With vacuum pumpcheck Motor5,5kW, 400/690 Volt, 1455rpm MaterialStainless steel 1.4541 (321) Information TypeVTS D7 30m² Machine number5266/1-11 Year of construction2000 With switchgearcheck Floorspace3x2,6 m Total height2,6 m Weight6300 kg Extra SpecificationsOn top of the tray dryer, a heat ex ...

Stainless steel transport trolley / slaughter trolley / meat trolley Technical data : Total dimensions: H90 x W56.5 x D95 cm Bathtub dimensions: H30 x W54 x D82 cm with circumferential beaded edge Tub closed with push handle Solid, welded frame for heavy loading mobile, with 2 pulleys & 2 fixed castors Function checked, device ready for use Condition see original pictures! Call or email if you have any questions. Purchase price incl. current VAT. A proper invoice will be issued.

Manufacturer: MF Trasformatori Year of Manufacture: 2024 Machine type: Oil Transformer Technical data: Power: 3150 kVA ONAN Primary voltage: 6.6 kV ±2x 2.5% Secondary voltage: 433V Frequency: 50Hz Switch group: Dyn5 UK: 6.5% Insulation class: A Windings: Cu / Cu Find more here - / Contact us at -

General SKU340X781 LocationBarneveld CEcheck MakeIshida TypeDACS-GN-SE050-35-SS-I-S Specified Features - Miscellaneous transport Capacity32-5000g Motorcheck 230v Information No.560012087 Year of construction08-2017 Floor space0,95x0,75 m Total height1,37 m Weight100 kg Extra Specificationsishida checkweigher: Max belt speed: 90m/min max weight: 5000g minimum weight: 32g division value: 2g equipped with receipt printer conveyor length 950 mm conveyor height 750 mm, adjustable Miscellaneous transportIshida Co. Ltd.Conveying systems > Miscellaneous transportBrand > Ishida Co. Ltd. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU340X784 LocationBarneveld MakeBoekels TypeEWK 2000+/WS 1,25 KG CD Klasse X Main Features MaterialStainless steel Specified Features - Miscellaneous transport Capacity4-1500g Information No.VAB-13565-02 Year of construction2002 Floor space1,45x0,9 m Total height1,75 m Weight270 kg Extra Specifications boekels checkweigher: Max belt speed: 0,92m/s max weight: 1500g minimum weight: 4g division value: 0,2g conveyor length 1450 mm conveyor height 800 mm, adjustableMiscellaneous transportBoekelsConveying systems > Miscellaneous transportBrand > Boekels What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!