133,845 used machines on RESALE, but how to find them? Machine Search
can be loaded by seller - 70% Auction-ID: A3-43529-10974
Number of tools 240 Tool holder BT 50 "BIG PLUS" Tool coding space-coded Tool breakage monitoring MOP Number of pallets 6 pallets Pallet size 630 x 630 mm X-travel 1000 mm Y-travel 900 mm Z-travel 1000 mm NC – round table division 0.001 ° Gear stages 2 R.P.M. 50 – 6000 Torque 606 Nm Rapid traverse 60 m/min Zero point determination Renishaw MP10 Zero point clamping system System 3R kW 30/22
Equipped with Rated Input Voltage: 1P AC380V ±15% 50/60Hz; Rated input strength: 14A; Rated input power: 9.2 KVA; Open-circuit voltage: 256V; Output current setting: 20-60A; Rated output voltage: 104V; Cyclic duty cycle: 60%; Efficiency: 70%; Insulation class: F; Protection class: IP21; Welding by contact (arc formation): Yes; Unused in box
Table surface 600 x 500 Swivel range 110 degrees Height 150mm good condition
40 cut plates with 13 rails Total price Bakery condition Different insertions
PVC PROFILE EXTRUSION LINE EVC BRAND, single screw extruder with 60 mm 28 LD, constructed in 1998, for 180 mm max width, 44 kw drive, control panel, Calibrating desk 3,7 m.long with 1 x 9 kw.pump, Caterpillar pull off unit, 180 mm wide, saw, 6,0 mt.long discharging table.
Cold storage wagon 60x40 with 14 stainless steel sheets LxWxH: 60x45x160cm 14 rails used
TECNOVA RECYCLING EXTRUDER, for PE PP PS PC ABS, Barrel with 130 mm screw 54 L/D, as new screw and barrel, n.2 degassing pumps for slightly moist or heavy prints, hydraulic screenchanger, hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet for complete management of the line, in need of reconditioning, capacity: 500-600 kg/h, conditions: reconditioning needed, type: 130 mm. 54 L/D 2xdegassing points 500-600 kg/h nominal throughput rate
Dimension tank Height 6,850mm Width 3,450mm , main hole 750mm safety rail 1000mm Angle Helical Bevel Gear mtor 5hp 1:60rpm Location of tank still at SATHAAN ENGINEERING supplier Songkhla. Commercial 1. Ms.Supawadee (supawadee@greatglove.com) 2. Ms.Wilawan (wilawan_sakul@greatglove.com)
1-deck swashscreen (expandable to 2 decks) with a screening area of 1.80 m²/deck, drive 4.0 kW via V-belt (engine renewed). Including 1 pc. sieve insert (not strung; stainless steel blank).
USED VERTICAL MIXER, 24 m3 capacity, total height approx 5.400 mm including transmission group + cyclon, max Ø 2.800 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter,, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, electric voltage: 400 V, 50 Hz,, conditions: good working conditions, availability: immediate, width: 2800 mm. special transport
GRANULATION AND SEPARATION PLANT, Capacity up to 600 kg/h (see below list), separation surface 750 x 375 mm, Vibratig ytable with a 0.750 kW drive, Blower - 0.750 kW drive, Total drive power 1,5 kW, Weight 380 kg, Processing capacity in kg/h approx. :, CU - Solid cable 500, CU - Stranded cable 250, AL - Cable 300, CU - Granulate 600, CU/AL - Radiator scrap 600, Electronic scrap 250, Various plastics 300, Tyre rubber 300, installed power - used power in work: about 60-65% : 1,5 kW, availability: 1 month approx, capacity: up to 600 kg/h, conditions: new equipment, SPECIAL FEATURES: spares usually available in stock - no downtime, CONSIDERATIONS: Ideal to start a profitable recycling business from scraps
EdmoLift WP 85EM Electric Lift 80 kg Loading Area 60x47 cm 24V Made in Sweden, the WP by Edmolift series electric lift is designed to give the operator the ability to easily lift, transport and position heavy objects – all in perfect ergonomic conditions. With a lifting capacity of up to 200kg, the powerful electric lifts of the WP by Edmolift series have many uses, while the design of the lifts brings unbeatable mobility and ergonomics. With the many accessories available, the WP by EdmoLift series offers you the most universal and solid electric lifts on the market, which can be easily adapted to your needs. Manufacturer: EdmoLift Model No.: WP 85EM Serial Number: 125512 Type: Electric Lift Load capacity: 80 kg Net weight: approx. 40.5 kg Dimensions: 79.5 cm long, 60 cm wide and 192 cm high Loading area: 60 cm wide and 47 cm long Lifting time: approx ...
EdmoLift WP 85 Electric Lift 85 kg Loading Area 60x47 cm 24V Made in Sweden, the WP by Edmolift series electric lift is designed to give the operator the ability to easily lift, transport and position heavy objects – all in perfect ergonomic conditions. The powerful electric lifts of the WP by Edmolift series have many uses, while the design of the lifts brings unbeatable mobility and ergonomics. The WP by EdmoLift series is one of the most universal and solid electric lifts on the market, which can be easily adapted to your needs. Manufacturer: EdmoLift Model No.: WP 85 Type: Electric Lift Load capacity: 85 kg Net weight: approx. 38.5 kg Dimensions: 73.5 cm long, 60 cm wide and 160 cm high Loading area: 60 cm wide and 47 cm long Lifting time: approx. 19 sec Battery: 24 V or 7.2 Ah Charger: 230 V or 1.5 A max. platform height 144 cm Minimum he ...
Motor power: 45 kW Nominal flow rate: 7.5 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 1500x1000x1265 mm Estimated weight: about 700 kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-4
Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roll width: 600 mm -Conveying length: 1850 mm -Diameter roller: 60 mm -Center distance: approx. 140 mm -driven: via chain -Geared motor: 0.37 kW 35 rpm -Roll speed: 9.4 m/min -Dimensions: 2000/900/H400 mm -Weight: 114 kg
Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Manufacturer: Platten, scissor lift table type 6.0 T/F/A -Load capacity: 6000 kg -Platform: approx. 1740 x 1280 mm -Dimension when retracted: Height 975 mm -Extended dimension: Height 1390 mm -Hydraulic unit: Kunz/Elmot 1.5 kW / 180 bar -Transport dimensions: 1740/1280/H1985 mm -Empty weight: 1270 kg
Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: Nord, gear motor with brake -Gearbox: Type SK 3080A F i= 4.59 -Speed: 600/61 rpm -Engine: SSB Type 05-0410.208.50-K1 -Power: 0.75 kW -Protection class: IP44 -Hollow shaft: Ø 35 x 115 mm -Dimensions: 400/370/H175 mm -Weight: 32 kg
VoIP phones UNIFY OpenStage 60T approx. 8 pcs., small quantity handsets SIEMENS
Dining table light grey approx. 60x180 cm, 3 cantilever chairs, chrome frame, seat leather grey, traces of use
A deposit of €3500.00 is required in order to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. B-axis travel -120 +90 C-axis travel +/- 360 X-Y-Z axis speed 30 mm/min C-axis speed 10800 deg/min 30-position tool changer Max tool diameter 90-130 mm Max tool length 300 mm X-axis positioning accuracy 0.016 mm Positioning accuracy Y/Z axis 0.012 mm B/C axis positioning accuracy 14 s X-axis repeatability 0.009 mm Y/Z axis repeatability 0.007 mm Repeatability of B/C axes 8 s Tables, utensils and accessories included WARNING! FOR TRANSPORT, EXCEPTIONAL TRANSPORT WITHIN 3 METERS IN WIDTH IS REQUIRED Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-4386 ...
used
2 EACH REBUILT GE LM-6000 PC SPRINT YOM 2002 Recent overhaul on Turbine Hours since overhaul approx. 2,000 GAS TURBINE With Sprint Power Boost FUEL: GAS Fuel POWER OUTPUT: 47,300 KW ISO MANUFACTURES GUARANTEED HEAT RATE OF - 8200 BTU/ kWh_ EMISSIONS GUARANTEE, WATER INJECTION: NOx 25ppmvd 15% O2 GENERATOR: Brush 71.2 MVA, 60 HERTZ, 13.8 KV
Metal cabinet approx. 60x130 cm, shelf, hardly any contents
SOLMEK BM-600 Universal Floating Hydraulic Flail Mower, Floating Flail Mower, Oil Flow 30-80 L/min, Cutting Size 600 mm, Pin Diameter 30 mm, Never Used, Packaged in Original Packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 175 kg Auction-ID: A7-45834-235
SOLMEK BM-600 Universal Floating Hydraulic Flail Mower, Floating Flail Mower, Oil Flow 30-80 L/min, Cutting Size 600 mm, Pin Diameter 30 mm, Never Used, Packaged in Original Packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 175 kg Auction-ID: A7-45833-235
SOLMEK BM-600 Universal Floating Hydraulic Flail Mower, Floating Flail Mower, Oil Flow 30-80 L/min, Cutting Size 600 mm, Pin Diameter 30 mm, Never Used, Packaged in Original Packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 175 kg Auction-ID: A7-45833-100
SOLMEK BM-600 Universal Floating Hydraulic Flail Mower, Floating Flail Mower, Oil Flow 30-80 L/min, Cutting Size 600 mm, Pin Diameter 30 mm, Never Used, Packaged in Original Packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 175 kg Auction-ID: A7-45834-100
Pallet rack grey/white 2 stands each approx. 600x80 cm, 3 trusses each 270 cm, approx. 12 pallet spaces incl. floor spaces
Shelf Roller VARIOIFIT approx. 60x40 cm, Handle
Rolling workstation STIER 1,600x2,500h mm, real wood panel, electrification, packing space 217
STIER workstation 1,600x2,500h mm, real wood panel, electrification, packaging space 218
STIER workstation 1,600x2,500h mm, real wood panel, electrification
STIER workstation 1,600x2,500h mm, real wood panel, electrification
Workstation repacking/reworking approx. 2,600x2,000 mm
Workbench GARANT 1,600 mm, with lighting superstructure
Compact Conveyor KOCH 608 Bj. 05-12, S/N 32141, 230 V
For screwing steel or aluminium profiled sheets. 3 boxes (2x250 pcs. and 1x 100pcs.) 600 pieces. Auction-ID: A1-45977-249
Number of tools 240 Tool holder BT 50 \"BIG PLUS\" Tool coding space-coded Tool breakage monitoring MOP Number of pallets 6 pallets Pallet size 630 x 630 mm X-travel 1000 mm Y-travel 900 mm Z-travel 1000 mm NC – round table division 0.001 ° Gear stages 2 R.P.M. 50 – 6000 Torque 606 Nm Rapid traverse 60 m/min Zero point determination Renishaw MP10 Zero point clamping system System 3R kW 30/22 Auction-ID: A1-45737-2
Serial Number: 77653 • Power: 43 kW • Controller: Selco OSI / NC410 • Additional Notes: Power supply 380 VAC, 3-phase, 50 Hz; rated current 81 A; pneumatic air supply 7 bar; suction air speed 30 m/sec; wiring diagram VB003; Weight: ~11,000 kg; Software: Selco OSI, NC410 (release 2.x manuals present); Total switched-on time: ~16,301 h; Total worked material volume: 133.8 m³; Auction-ID: A7-40553-14
Control Type: Selogica Closing System: Hydraulic TECHNICAL DATA Closing Force: 600 kN Clearance between Tie Bars: 370 mm x 370 mm Platelet Dimensions: 570 mm x 570 mm Mold Size: Min 250 mm Maximum Opening Stroke: 500 mm Maximum Distance Between Platens: 750 mm Screw Diameter: 40 mm Shot Volume / Shot Weight: 188 ccm / 172 grams PS Injection Pressure: 1390 bar GENERAL DATA Motor: 15 kW Heaters: 5.5 kW Operating Hours: To be verified EQUIPMENT Language: German Hydraulic core: x1 Service book: Yes Auction-ID: A7-45917-1
Gripper function Diameter 150-850mm tilt forward/back 0-90, Turn left right +90 / -90 Battery 12 V 70 AH without charging rack without battery without charger Auction-ID: A1-45975-25
Gripper function Diameter 150-850mm tilt forward/back 0-90, Turn left right +90 / -90 Required battery 12 V 60 AH without charging rack without battery without charger Auction-ID: A1-45975-26
maximum number of results exceeded
please refine your search
1 € 
