130,507 used machines on RESALE, but how to find them? Machine Search
:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mm swing diameter:550|650|1000|1250 mm turning height:450|500|750/950|1000 mm spindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/min Travel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mm Travel of ram (horiz.):300|340|500|700 mm rapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/min Tool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kW Machine height:2600|2910|4020|4605 mm weight of the machine ca.:4500|6000|13000|18000 kg hydraulic motor:2,2 kW servo motor X-axis:1,6|1,6|4|7 kw servo motor Z-axis:3|3|7|7 kw coolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW :35|40|50|70 kva CNC controller:Siemens/Fanuc/Fagor CNC controls from:Si ...
x-travel:630 mm y-travel:560 mm z-travel:560 mm weight of the machine ca.:6,5 t Number of axles:5 St. spindle turning speed range:18.000 U/min numbers of tools in magazin:24 tool taper:SK 40 Round Table B-Axis
spindle speed::max. 12000 tool taper:HSK 80 . b-axis:360 x 0,001 ° worktool support (A-axis):+40 / -95 ° weight of the machine ca.:25 500 Kgs. x-travel:800 mm y-travel:700 mm z-travel:630 mm dimensions of the machine ca.:6200 x 3000 x 3200 mm pallet size::500 x 500 mm no. of tools in the magazine:61 Nos. Weight approx.:23,5 t Horizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition. Single spindle
x-travel:780 mm y-travel:560 mm z-travel:560 mm weight of the machine ca.:10 t Number of axles:5 St. spindle turning speed range:20-12.000 U/min numbers of tools in magazin:30 tool taper:SK 40 surface area:500 x 630 mm Round Table B-Axis Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.
Total force (nominal):800 to Clamping surface (left-right):x mm Clamping surface (front-back):x mm table surface area:3200 X 2200 mm Total force (nominal):2-3-4-5- Presse - 600 to. to table surface area:2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. 0602300 Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface an ...
x-travel:600 mm y-travel:500 mm z-travel:450 mm turning speeds:5 - 5000 U/min quill stroke:90 mm total power requirement:9 kW feed range:0-10.000 mm/min weight of the machine ca.:3260 kg dimensions of the machine ca.:2200x2800x2000 mm spindle:6 kW vertical milling head:SK 40 CNC universal milling machine without toolchanger, Equipped with CNC-Heidenhain TNC 407 el.handwheel coolant device
x-travel:600 mm y-travel:410 mm z-travel:520 mm tool change unit:16 turning speeds:8000 1/min control:SIEMENS 810 shopmill table surface area:840 x 420 mm rapid traverse X- and Y-axis:36 m/min rapid traverse Z-axis:20 m/min taper ISO:SK 40 spindle drive:15 kW weight of the machine ca.:2,5 t space requirements approx. LxWxH:2,2 x 2,3 x 2,3 m vertical machining center, el. handwheel, no chipconveyor, known defect: control starts not 100% special price
x-travel:800 mm y-travel:800 mm z-travel:800 mm turning speeds:35-10.000 1/min spindle:37 / 30 kW max. torque on the spindle:525 / 206 Nm Tool bore:BT 50 rapid traverse:60 m/min tool change unit:160 Pos. size of pallet:500 X 500 mm control:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kg workpiece height max.:1.000 mm interference area:900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping...
x-travel:800 mm y-travel:800 mm z-travel:800 mm turning speeds:35-10.000 1/min spindle:37 / 30 kW max. torque on the spindle:525 / 206 Nm Tool bore:BT 50 rapid traverse:60 m/min tool change unit:160 Pos. size of pallet:500 X 500 mm control:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kg workpiece height max.:1.000 mm interference area:900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply,
turning diameter:1250 mm turning length:6000 mm spindle bore:130 mm Turning rate:5 - 710 U/min. turning diameter over bed slide:850 total power requirement:37/52 kW weight of the machine ca.:16 t dimensions of the machine ca.:12 x 4 x 2 m Teach In Controll HEIDENHAIN 1 fixed steady
length in total:1200 mm band width:500 mm conveying height:1200 weight of the machine ca.:1 t dimensions of the machine ca.:4,0 x 1,5 x 2,2 m swarf conveyor with coolant attachment Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.
faceplate diameter:5000 mm swing diameter:6100 mm turning height:2400 mm ram stroke each side:1490 mm ram head dimension:340 x 340 mm max. workpiece weight:100.000 kg total power requirement:100 kW weight of the machine ca.:155 t faceplate turning speed range:0,4 - 50 U/min with 2 axes CNC SIEMENS 840 D
material width coil line:600 mm coil weight in kg:2 x 3000 kg coil internal diameter:460 - 630 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm Number of Straightening rolls:9 roll diameter:30 mm material cross-cut:1200 mm² weight:9,5 t Dimensions (WxDxH):4,3 x 2,6 x 2,6 m straightening machine:30.600/9 double decoiler:Kohler, 3000.2 ausiliary drive:hydraulic lag brake:pneumatic expansion:hydraulic snubber roll:hydraulic; motoric driven
Pressure:600 t distance between columns:2600 mm stroke:900 mm Distance table/ram, max. stroke up, adjustment up:1600 mm Table surface area:2500 x 1730 mm pressure of drawing cushion in table:250 t Die cushion stroke in table:400 mm Die cushion area in table:2300 x 1300 mm Die cushion pressure in ram:63 t Die cushion stroke in ram:160 mm Die cushion area in ram:1900 x 1300 mm Ram surface:2500 x 1730 mm Side window:1100 mm Oil volume:3500 l Power capacity:200,0 kW Dimensions (WxDxH):4,1 x 2,8 x 9,6 m Height above floor:6,4 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact absorption:hydraulic
pressure:600 t distance between columns:3640 mm stroke:350 mm no. of strokes:11 - 44 /min Distance table/ram, max. stroke up, adjustment up:1550 mm table surface area:3600 x 2500 mm sliding table:3600 x 2500 mm ram surface:3600 x 2500 mm Side window:2200 mm ram adjustment:400 mm material width coil line:500 - 1950 mm Material thickness at 1200 mm material width:0,6 - 2,5 mm Material thickness at 1850 mm material width:0,6 - 2,0 mm Material thickness at 1950 mm material width:0,6 - 1,75 mm Coil weight:35,0 t coil internal diameter:610 mm coil external diameter:900 - 1900 mm no. of straightening rolls:13 straightening roll diameter:50 mm Stack height:400 mm stacking dimensions - station 1+2 (L x W):150-2000 x 250-2000 mm stations:2 power requirement:112,0 + 35,0 kW Weight:390,0 t Dimensions (WxDxH):7,3 x 5,1 x 15,0 m Height above floor:9,1 m Height below floor:5,9 m clutch-/ brake combinat ...
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 75740 € : 1431.49 € : 600 mm : 1500 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 MK : 3 : 20 - 100, 80 - 400, 400 - U/Min : max. 8 m/min : max. 8 m/min : 290 mm : 90 mm : 5 MK : 225 mm : 11 kW : 3,5 / 22 kW/Nm : 1,75 / 11 kW/Nm : 120 Nm : 1250 daN : 1050 daN Fast and simple communication between the operator and the lathe. Simple workpieces are machined in the same way as on the universal lathe, but more efficient. Complicated workpieces are machined in the same way as on the universal lathe, but faster. Complicated workpieces are machined in the same way as on the CNC lathe, but easier. Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software leads the operator also without programming skills simple and fast to the finished workpiece. The interface is simple and with large icons, which is convenie ...
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 137900 € : 2606.31 € : 220 to : 6050 mm : Y1 / Y2 / X Achse : 265 mm : 5100 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 1050 mm : 154 mm : 250 l : 22 kW : 7500 mm : 1770 mm : 3350 mm : 20800 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides ...
HYDRAC VPS 330 V-Plough – as good as new snow plough Manufacturer: HYDRAC (Pühringer GmbH & Co KG) Model No.: VPS 330 Type: V-Plow Serial Number: SN107182 Product no.: X0016336 Year of Make: 2022 Condition: almost as good as new Operation: only approx. 30 kilometres driven Technical design • Working width: approx. 3,300 mm • V-plough with hydraulic adjustment • Spring flap safety (multiple spring packages) • High-quality plastic scraper blades • Solid design with reinforced attachment frame • Support legs for safe storage • CE compliant Facilities • Hydraulic side adjustment • V-shape, Y-shape and straight alignment possible • Height-adjustable sliding plates • Warning flags • Very stable industrial design Condition • Very well maintained • No significant signs of wear • Technically flawless • Ready to use C ...
Equipped with Cummins engine; approved until 2025; Auction-ID: A1-41682-10
SNR - Batch of precision bearings 60KG Auction-ID: A1-46070-185
Unaudited Good condition Auction-ID: A7-46327-148
Robust snow plough/bulldozer shield/shield combined with Hardox segment scrapers with plate suspension. Softer suspension available for pure snow removal. Shield can be shortened to 1500 mm width and reduced in height. Re-insertable for rolling the snow on top. Plastic scrapers for asphalt protection available as an option. Adapter plate for attachment to tractor, truck, etc. included in the price. For attachment to wheel loader and forklift, or front three-point height adjustment can be omitted (low price). technical data: - Shield width 2600 mm can be shortened to 1500 mm, widened up to 3600 mm - asymmetric design possible - Clearance width at 36 slants: 2100 mm - Height 875 mm (minimum height 670 mm) - Total length with adapter 1120 mm - hydr. Hug 300 mm - extremely stiffened for earth movement, gravel, food, debris, etc. - Scraper slurs segmented with plate suspension, o ...
Material: stainless steel Year of manufacture: 1980 Content: 1000 ltr Weight: 350 kg Length x Width x Height: 3800 mm x 1900 mm x 1900 mm Drive shaft: 6,8 kW, snail 0,6W; Drive snail: 80 1/min. We develop, plan and build for you the whole plant exactly for your needs from new and/or used machines. More then 1000 used machines on stock. Write us below!
Hand roller spreader with wheel drive, capacity approx. 60 ltr., spreading width approx. 70 cm. scattering way: salt about 5-6 km, Sand 1 km. Condition: Super See more winter maintenance technology from A to Z stock - photos!
Gritter Küpper Weisser STA 95 W20 B, attachment device for Unimog, truck etc. driven by B & S petrol engine. Content 2.0 m. equipment: without plan retractable roof. Weight 800 kg. Not functional, corrosion, engine goes on strike - unaudited. With controller and documentary. More spreaders and winter maintenance technology stock! -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...
Rollers loyal for three-point hitch. Splitt-, salt and sand spreaders, content 200 ltr. (with optional essay 280 ltr. possible), spread width 100 cm. Foldable litter floors and shutters made of V2A stainless steel, scattered wave with wear-resistant plastic elements, container cover with hinged bar. Min. for hydraulic drive with flow 12 / MAX 25 ltr. / min. Almost like new condition.
Spreading attachment Küpper-Weisser STA80 W12H. Attachment device for Unimog, trucks, equipment carriers, etc. with municipal hydraulics. Content 1.2 cbm . Equipment: tarpaulin folding roof, control panel and documentation. Further spreading technology as well as snow clearers in various designs and sizes stock edstocked! Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. Please be happy to receive advice by phone in advance. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...
Roller spreader for rear mounting, drive via a 12 volt electric motor with overload protection (8 A). Container contents 120 ltr. , cam roller with interchangeable, asymetric cams (suitable for sand, salt and shards or granules)Roll width 125 cm, stirring shaft to prevent lump and bridge formation, low-wear 10-stage scattering volume regulation by adjustable spring bottom with rubber apron. With grating for accident protection and cable remote control (start/stop). Without growers! Scattering length salt approx. 5-6 km, sand approx. 1 km (manufacturer specifications) Built in 2012, unused, technically and visually as new condition, here and there paint somewhat repelled. Other roller spreaders, also trailers, self-loaders, drive hydraulic, PTO shaft or wheel stock. Winter service technology of all kinds, also slingshot spreaders, snow shields, snow blowers, tractors and used compon ...
Forklift attachments Snow sliders with rubber scrapers Quick pick-up with the fork tines Clearing shield 2-fold to the left and right adjustable Spring folding hatches and scraper screwed on Securing against unintentional slipping Shield width: approx. 2000 mm Shield height: approx. 400 mm Fork cross section: approx. 120 x 50 mm Fork distance: approx. 540 mm All information without guarantee
Spreading attachment PIETSCH STA 1.7 MW series 2000, capacity 1.7 m3, conveyor belt, tarpaulin folding roof, spreader rubber, drive via vehicle hydraulics, with remote control and support supports. Sale as is or in parts possible.
Scatterattachment Küpper-Weisser STA 95 – E50H, spreader for trucks with usable volume 5 m3, screw conveyor, hydraulic drive, spreading width 1 to 6 m, with tarpaulin folding roof, all-round warning light, GPS antenna, wind shield, control panel. More scattering and clearing technology available, see photos!
Spreading attachment Schmidt SST 20 – OAXN MITOS, wet salt spreader with conveyor screw. For Unimog, trucks with municipal hydraulics. Content 2 m3, Sole 860 ltr.. Equipment with tarpaulin folding roof, storage stand, height-adjustable, remote control, Optional PTO pump and hydraulic oil tank available. More winter service technology available - see example photos!
New screw and barrel for Battenfeld .../1900 injection unit 55 mm diameter complete with heaters and screws in the factory box.
Little used screw for Battenfeld .../1900 injection unit 65 mm diameter
complete screw and barrel dia. 45 mm for Battenfeld /1000 injection moulding machine is good condition
Vario - Snow removal blade Samasz PSV 301. Universally hydraulically adjustable blade – wedge plough or side clearer left-right use possible. Working width max./min. 303/262 cm, blade height 80/98 cm, rubber skirting strips, special equipment: training wheel set, plough lighting, electric 12 volt cable remote control for light and hydraulic control block. 1 hydraulic connection dw required. Weight approx. 480 kg. Almost new condition. Further snow removal blades, snow blowers and slingshots as well as spreading technology in stock - see also sample photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!
Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available
Thermoplastic polyurethane elastomers, pressure hose, air hose, plastic hose, barrier fences -Snow fence: 2.25 m wide -2 rolls: a 50 m -Price: complete -Dimensions per roll: Ø 350/2270 mm -Total weight: 230 kg
Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow -Working width: max. 1700 mm -Plow height: 820 mm -with: Spring-loaded flap drive-over system -Plow: mechanically adjustable -for: attachment to forklifts or similar -Transport dimensions: 2195/900/H1100 mm -Weight: 350 kg
We offer you an add-on snow blower (two-way) from the company Schmidt. - Model VF-Z-55-1-004 - fully functional - Year of construction: 2001 - Total mass 1540 kg - Voltage 24 V - Working area roadways (road and rail (standard gauge: 1435 mm) - Room width 2.40 m - Ejection width 41 cm - Drive via PTO shaft front - suitable for Unimog / road-rail Unimog If you have any further questions, please feel free to contact us or visit us Errors and information Errors excepted! No guarantee or warranty. Prior sale and errors excepted. ANB Handel & Service Inh. M. Schönau Halbmondsweg 399885 Ohrdruf
Trailer spreader with wheel drive, stable all-steel construction (mostly galvanized sheets on both sides, primed and painted), net capacity 0.8 m³, spreading material distributor 400mm for spreading widths of 1-6 m with salt (grit 1-4 m), manual spreading pattern adjustment, path-dependent control from 2 - 60 km/h, electrical system 12 volts, digital control panel V-PAD with various displays and setting options (memory card not included) height-adjustable pulling device with overrun brake, towing eye (ball coupling optionally available). Other equipment: protective grille, tarpaulin folding roof, rear siding, operating instructions, quick start instructions, workshop instructions, spare parts lists, connection cable with separation point, etc. The spreader trailer is unused – only soiled by corrosion protection application, last technical inspection until 09-22. Technically almost ...
various screws up to diameter 150 mm available
Snowblower Westa Demonstration unit Hydraulic drive 3 point mount - hydraulically swivelling Pipe Hydraulic Adjustment Weight 615 kg Bolt bottom 28 mm Bolt top 25 mm
All-in-One Snow shovel, sweeper, screw conveyor Drive via PTO shaft 3 DW hydraulic units Width 2.40 m Lights Good condition, little run
snow chains -the automatic snow chain - fascinatingly simple and fast -1: Pair Price: complete -Weight: 10 kg
Spreading trailer Schmidt pre-wetted salt, up to 24 m spreading width Trailer with Aebi-Schmidt "Stratos" spreader body, solids and brine tanks. Contents: grit 5 m³, liquids, e.g. brine: 5,200 ltr. Spreading width: 6-24 m in increments of 1 m Propulsion: Diesel engine Hatz 3M41 Operating control by remote control including remote engine start/stop and engine monitoring. Curb weight 6,500 kg, gross vehicle weight 20,000 kg, tyres 425/65R22.5 164J, Nato towing eye 76 mm! Built in 2002. Hardly used, min. corrosion, accident-free. Operating manuals with spare parts lists completely available. More winter service equipment in stock - see sample photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, ...
maximum number of results exceeded
please refine your search
1.000 € 
