tr 60 sn used for sale

Vertical packaging machine with volumetric cup filler for granules. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50g | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L800xW960xH1900mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your pa ...

Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1% | max. speed of the machine in neutral: 10x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-38)mm | power: 220V, 6.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1800xW1500xH1900mm | weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging ...

Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 10x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-38)mm | power: 220V, 6.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1800xW1500xH1900mm | weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ou ...

Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 10x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-38)mm | power: 220V, 6.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1800xW1500xH1900mm | weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ...

Automatic Sleeve Labelling Machine with a capacity of up to 100 cycles per minute. Shrink tunnel included. Stainless steel version (SS304), servo motor driven cutter, no-bottle-no-label, label feeding device with a feeding speed of up to 90m/min for fast and precise production. Brusher devices to help fixing the label in the right position, bottle position fixing device, adjustment to lift he machine according to the bottle size. MITSUBISHI PLC, WEINVIEW touchscreen. - Specifications: max. speed of the machine in neutral: 100 cycles/minute | label ?: 28-50 or 50-95 or 95-125mm | label length: 35-300mm | label thickness: 0.035-0.08mm | power: 2kW, machine dimensions: L6000xW1050xH2100mm | weight: 1200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available im ...

Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml | volume of hopper: 30L | number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 200-600kg/h (with max. 5m conveying distance) |housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 15L/min | power supply: 220V | power consumption: 2.2kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

X-ray inspection system designed for large trays, boxes, large bags. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 600 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 150 kVp, 7.5 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | X-ray beam: horizontal scan | conveyor belt height: 750 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ? 60 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: L1800xW1300xH1900 mm | weight: 580 kg. Please note that our new prices are often below the usual used prices. Pl ...

Brand Name: GOPEL Model: OPTICON THT 600 LINE Year: 2015 Serial Number: TH-603 Notes: - The machine is in excellent condition and in working order. - No CE manuals and declaration of conformity have been provided. - The goods being sold are declared out of service and with the obligation to restore safety in the devices relating to Legislative Decree 81/08 on machine safety. - PROPERTY INTENDED FOR VAT HOLDERS.

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 130 x 50 mm Truss Type: PNB0443|1.5 Agraffe: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of trusses 2,417 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

For sale is a good used Keyence digital measurement projector of the type IM-6025. The measuring device is sold including the IM-7500 control unit. Prior sale and errors excepted.

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 120 x 50 mm Truss Type: PNB0442 Agraffe: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of trusses 2,058 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Note: Some of the trusses have 5-6 drill holes on the sides. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery loc ...

sheet width: 6040 mm plate thickness: 4 mm total power requirement: 12 kW weight of the machine ca.: 22 t dimensions of the machine ca.: m - Specification - backstop - Roller tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting lenght 6000 mm Cutting thickness 13 mm

Bridge punch of the company Schön, model 64035 / 92 The machine is fully functional.

pressure: 600 t ram surface: 3600 x 2500 mm stroke: 350 mm Control: Siemens S 7 no. of strokes: 11 - 44 Hub/min table surface area: 3600 x 2500 mm ram adjustment: 400 mm material width: 500 - 1950 mm material thickness: 0,6 - 2,5 mm mm coil weight: 35 t coil external diameter: 900 - 1900 mm coil internal diameter: 610 mm no. of straightening rolls: 13 straightening roll diameter: 50 mm Stack height: 400 mm stations: 2 total power requirement: kW weight of the machine ca.: 390 t dimensions of the machine ca.: m with reel, Rstraight out Unit, (conveyor system Schleicher) and stacking unit(NSM) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: OptiCoater 600 Serial number: E022210405068 Year of construction: 2020 Belt width: 600 mm Power: 3 x 400V, 50Hz, 3kW Dimensions: 1800 x 1350 x 1450 mm Weight: 456 kg

A Röders vertical CNC high-speed machining center is available. Travel X/Y/Z: 600mm/450mm/300mm, speed: 42000rpm, tool holder: HSK-E40, power: 14kW, table dimensions X/Y: 700mm/500mm, max. workpiece weight: 800kg, feed: 30m/min, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3500mm/3100mm/2700mm, weight: approx. 5200kg, control: Röders, operating hours: approx. 60894h. Including extraction system and chiller. Documentation available. On-site inspection is possible.

GAMMA MECCANICA VIBRATING SCREEN, previously fitted on a 1.600 kg/h extrusion line, n.2 ways out: for good and clogged material, machine reconditioned, screen size 2.400 x 450 mm ca, 2,0 kw drive, machine offered reconditioned, availability: 3 weeks from confirmation, capacity: 1.600 kg/h, conditions: refurbished, type: plain vibrating screen

Qty. 1 Second-hand slitter – still on foundation Mfc.: TBA Removed to new location: 2000 Stopped: 2022 Input coil characteristics: Strip thickness: 0.1 - 3.6 mm Cut strip width: max 600 mm Internal coil dia.: ø 290 - 650 mm Maxi. external coil dia.: 1100 mm Max. coil weight: 3000 kg Output coil characteristics: Internal coil dia.: ø 400 mm Number of strip cuts 7 times at thickness 3.5 mm Min. width of cut tape: 10 mm Tolerance of tape cutting width 0.2 mm

Copper plate for lapping machine. Dia 600mm, NEW, make: Melchiorre, Mimu Machine Tools Gussago BS Italy, Lapping is a machining process in which two surfaces are rubbed together with an abrasive between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called grinding), involves rubbing a brittle material such as glass against a surface such as iron or glass itself (also known as the lap or grinding tool) with an abrasive such as aluminum oxide, jewellers rouge, opticians rouge, emery, silicon carbide, diamond, etc., between them. This produces microscopic conchoidal fractures as the abrasive rolls about between the two surfaces and removes material from both., The other form of lapping involves a softer material such as pitch or a ceramic for the lap, which is charged with the abrasive. The lap is then used to cut a harder mate ...

Manufacturer / Type: MicroStep SPL-PA 6001.25 + S500 Processing area: 6,000 x 1,500 mm + 500 mm shaft Drive: double-sided backlash-free DC servo drive Guide system: Linear guides Positioning speed: up to 44,000 mm/min Repeatability: according to DIN 28206 / IRC 2500 Control: MicroStep iMSNC incl. touch control panel and software Kjellberg HiFocus 160i Current range: 10 – 160 A Operating voltage: 400V, 3~50Hz Power: 33 kVA Gases: air, oxygen, nitrogen, argon, hydrogen Donaldson DFPRO 6 Cyclopeel – automatic filter cleaning Separation efficiency: 99.999 % at 0.5 μm Extraction volume: 4,500 m³/h Low noise ( < 75 dB(A)) Including oil/water separator and software connection

used sourdough machine Isern Häger 600 RMS, for 1000 liters, in bakery condition (good condition), Masch.-Nr. 06910004, 2.3 kW, 400 V, 50 Hz, weight 420 kg

TECOM BLOWN FILM EXTRUDER, for LDPE-RLDPE blends, Contrex feeding, 2 gravimetric components + 1 volumetric dosing units, Screw diam.70 mm 30 L/D, Rotating head, Low neck, 1.600 mm pull off unit, gusseting unit, Cason corona treatment, single color printer (for marks), 1.600 mm double collection frame, BRA 36+ Eurochiller, working width: 1600, availability: February 2026

PREALPINA EXTRUDER 130 mm., For PE PP ABS PS PC PS, nominal throughput rate 500-600 kg/h depending on material and feeding rate, 280 kw. d.c. drive and starter (new 2019), Electric cabinet, CE compliance, users manual, electrical drawings, crammed feeding unit, Barrel with screw diam.130 mm.35 L/D, N.1 vacuum degassing pump, Constructed 1996,, offeres : checked for good working conditions OR reconditioned, installed power - used power in work: about 60-65% : 280, availability: ready-to-go

HOT-AIR SEALING SLITTER, to be positioned on top of rewinder in extrusion lines or on top of unwinder in bag makers., It creates a RIBBON SEAL. (adjustable width) on the web as per photo, while slitting, Adjustable air-blow to determine the sealed ribbon width Adjustable temperature Adjustable speed Adjustable width of the slit parts (200+1.400 mm./ 300+1.300 mm./ 400+1.200 mm.,…) minimum slitting at 200 mm. Complete with control panel, The machine is offered RECONDITIONED and TESTED

Size: 318 x 470 mm Equipments: 6 pockets, suction feed Criss-Cross Stacker and Max size: 318x470mm min. size: 148x210 Max speed: 2400 h Dimensions: 1650x650x1650

automatic baler Manufacturer: PAAL Type: KONTI 600 F/k with cross-binding Year of construction 2008 only 4 years in operation specifications: Press force: 145 t Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 2 x 75 kW Throughput capacity:approx. 510 m³/h Capacity at 35 kg/m³: 17.5 t/h Capacity at 60 kg/m³: 30.0 t/h Capacity at 100 kg/m³: 47.0 t/h Binding: 5-fold vertical Additional 4-fold automatic horizontal bonding Bale weight: approx. 800 - 1,250 kg depending on baled material and bale length Machine weight: up to approx. 39 t

1x SK labeller GAI 6023-x01, built in 2021, for self-adhesive labels / adhesive labels with capsule roller & 2 label As good as new GAI 6023-x01 Year of construction 2021 2 label stations 1 station with 2 roll-on heads for roll-on capsules Attachment for capsules Molded parts for common bottle sizes Accumulation sensor in the outlet, collection table with belt drive Achievement: Labelling only 2800b/h with roll-on capsule: 2000b/h Price: €38,500 plus VAT ex Rheinhessen location

Key data: 600 kN, 132 g/PS, 35 mm

Arburg 320C-600-250 Injection Moulding Machine Number: 238 Availability: in stock Year of production: 2008 Producer: Arburg Screw diameter[mm]:35 Injection weight [g]: 132 Injection pressure [bar]: 1820 Gap spacing [mm]: 320×320 Panel size [mm]: 446 x 446 Min. Form Height [mm]: 200 Control Type: Selogica Tongue: German Installed power [kW]: 23.9 Working hours [h]: 76550 Weight [kg]: 2330 Dimensions [mm]: 3500×1500 Feed hopper: NO Robot Nest: Yes Core String: 1x

Manufacturer: DMG Model: DMC 60H linear Year of Manufacture: 2009 Operating Hours: 85,242 Spindle Hours: 61,694 Control Type: CNC Control System: Siemens Sinumerik 840 D Power: 35 kW Spindle Speed: 18,000 RPM Tool Changer Capacity: 180 tools Tool Holder: HSK-A63 Travel (X / Y / Z): - X: 630 mm - Y: 800 mm - Z: 680 mm Pallet Size: 500 x 500 mm Machine Dimensions (L x W x H): 5.0 x 4.0 x 3.4 m Find more here - / Contact us at -

Manufacturer: DMG Model: DMC 60H linear Year of Manufacture: 2007 Operating Hours: 104,836 Spindle Hours: 76,420 Control Type: CNC Control System: Siemens Sinumerik 840 D Power: 35 kW Max. Spindle Speed: 18,000 RPM Tool Changer Capacity: 180 tools Tool Holder: HSK-A63 Travel (X / Y / Z): - X: 630 mm - Y: 800 mm - Z: 680 mm Pallet Size: 500 x 500 mm Machine Dimensions (L x W x H): 5.0 x 9.9 x 3.4 m Additional Feature: - Pallet changer RS4 with 4 pallets Find more here - / Contact us at -

Delivers smoothly an even batter coverage Provides adhesion for breading Belt width: 600 mm

Inv. Num. : 8517 Type: DS 6001.20PrkBk AF M Producer: MicroStep Created: 2018 Parameters: Control System: iMSNC Software: AsperWin Basic (2018) Switch-on hours: 12800 h Operating hours: 3400 h Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 50 mm Maximum sheet thickness when cutting (stainless steel): 6 mm Maximum sheet thickness when cutting (aluminium): 6 mm Plasma Source: XPR300/A Core Machine height: 2630 mm Machine length: 16735 mm Machine width: 9260 mm Machine weight: 22180 kg Equipment: Technical documentation Drilling unit Wittur DSF 4-19.3-20I. R3-GBL (26 kW) Filtration DFPRO-8 ART501 (11 kW) Automatic loader with suction cups Positioning gripper on the X-side Roller conveyors at the inlet and outlet Conveyor belt at the small parts outlet Automatic calibration of tool geometry for rota ...

Cast iron clamping cube 2 faces Length: 1000 mm Height: 600 mm Depth: 800 mm T-slots dimensions: 38 x 22 mm Weightapprox: 600 kg

The Tetra Pak Frigus 600 ice cream freezer is a specialized machine designed for the production and continuous freezing of ice cream and other frozen desserts. It plays a crucial role in the ice cream manufacturing process, ensuring the product reaches the desired temperature and texture while incorporating air to create a light and creamy consistency., Key Features of the Tetra Pak Frigus 600 Ice Cream Freezer:, - High Capacity: The Frigus 600 is designed to handle significant production volumes, making it suitable for medium to large-scale ice cream production., - Continuous Freezing Process: This machine allows for a continuous freezing process, which is essential for maintaining the texture and quality of ice cream. It helps achieve the right balance of air incorporation (overrun) and uniform freezing., - Precise Temperature Control: The Frigus 600 offers precise temperature and visc ...

Injection moulding machine Netstal synergy 600/110 BJ 2001

Injection moulding machine Arburg 320C 600/250 BJ 2002

Pneumatic folding bending machine FASTI Type 606 - 11 - 1.0Folding machine for sheet metal folding pre-bendingFor making a fold bendFolding bending machine for thin sheet metal instead of press brakeFabr. No. 9166002 year of construction 1991Working length: 1100 mmMaterial thickness at 45 kg/mm² 1 mmCompressed air requirement 6 bar- pneum. Foot switch roller infeed via threaded toggle screwsSpace requirement L x W x H 1600 x 300 x 1050 mmWeight approx. 250 kggood conditionThe fold is the doubling of the sheet metal in the edge area, i.e. 1x folded around the

Stud welding machine KÖCO KÖSTER & CO. Type 601 EWider-stand welding machine with capacitor discharge technologyFabr. No. 5356 Year of construction approx. 1995Maximum welding current 600 Amp.Welding power at 3% ED 600 Amp.Welding power at 100% ED 100 Amp.Bolt diameter 3-8 mmMaximum welding time 550 msMains connection 400 Volt, 50 Hz, 16 Amp. Plug- Welding current adjustment infinitely variable- Welding time adjustment infinitely variable- Welding gun KÖKO K14 with stroke ignition with 2 meter connection cable- 2 pieces of ground cable with 5 meters

Technical data of the pallet rack crossbar: Shelving system: Bito Type: PL 38 The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Box profile: 110 x 50 mm Truss Type: PT36.112LN Agraffe: 3 HK (hook) Clear width: 3,600 mm Max. load per pair of trusses 1,900 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

An aluminium mitre saw Eisele including a mobile extraction unit AS Sägetechnik is available. 1) Mitre saw Pressta Eisele GS 600, year of manufacture: 2023, saw blade diameter: 600mm, detent positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop adjustment: 200mm, working height: 970mm, extraction nozzle diameter: 100mm, weight: approx. 650kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, suction nozzle diameter: 100mm, air flow rate: 1400m³/h, machine dimensions X/Y/Z: approx. 750mm/800mm/1800mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

KNOLL VRF 900/6000 Coolant system GENERAL Project No.: 905738 Quantity: 1 pcs. Manufacturer: KNOLL Type: VRF 900/6000 Year of Make: 2006 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION GENERAL TECHNICAL DATA Mains fuse 200 A Total power requirement 88 kVA Machine dimensions (LxWxH) approx. 3667x2338x4000 mm REMARK The system supplied three multi-spindle milling machines in one processing line. We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non-binding and to check the data in detail during an inspection.

Bosch Angle Head Cabinet Tool You are buying a high-quality winding head cabinet machine for anchor production. The area of application mainly concerns anchor production. Manufacturing/production/operating documents are included with the machine. Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Technical data of the pallet rack crossbar: Shelving system: META Thyssen The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: orange Truss type: HS 140|15 Box profile: 140 x 50 mm Agraffe: 4 HK (hooks) Clear width: 3,600 mm Max. load per pair of trusses 3,300 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack crossbar: Shelving system: Bito Type: PRO The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Truss Type: PT150S Box profile: 150 x 50 mm Agraffe: 5 HK (hooks) Clear width: 3,600 mm Max. load per pair of trusses 4,000 kg, with the same weight. Distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Complete line for coating dragees