We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,375 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Traypacker Transnova
TrumaSort R4 Sorting of productions parts in 4 standardized containers
used
Type: Flexon Loading sections (L x W x H): 590x120x200 mm Cutting length: 1,0 – 30,0 mm Saw blades 1 set, 1010 mm Capacity: up to 1800 kg/hour Electric power: 8.0 kW Machine dimension in cm: Width: 145 cm Lenght: 60 cm Height: 115 cm Delivery time: 10 working days after advanced payment
used
used Treif Falcon portion cutter incl. scale and the sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, the machine is equipped with a smooth curved blade for products without bones, bone-in version optionally available, products up to -3° C. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
used
Tricool 99 S2/50 chiller 50/S2/1617 stainless combi chiller on mobile skid, also with heating
used
Traenklein; good condition; cleaned and checked; Table-to-table; Knife 9mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
used
Traenklein BRM; good ZUustand; cleaned and checked; Working width 500mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
used
Sieve drum machine Trützschler SF144 used for the processing of cotton fibres and similar fabrics. Manufacturer: Trützschler Type: SF144 with hose filters, each 15 hooks of 200 mm left and right In the middle of the machine is the sieve drum (length 1,200 mm approx. 500 mm), with fine stainless steel sieve fabric, clamped on square screen basket. Machine was used for separating/filtering cotton fibers and other light fabrics. with fan Dimensions filter box: 850 x 1,500 H 1,100 over frame, H with frame 2,300 mm Total space requirement: 2,300 x 2,000 H 2,800 mm 2 identically available. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
used
Properties Manufacturer: transmissions GmbH Type / type: 110600 No. S/N: 1457 Year of manufacture: 1999 with drum motor Overall length: 1020mm Overall width: 760 mm Color: Blue / stainless steel Belt: Smooth
used
Treif model: 08 55 stainless dicer, max product 350mm x 90mm x 90mm, variable speed
used
Description Precise forming with quick tool changes. Our axial t form forming machines of type REB are specially suited with forming forces up to 1,300 kN and effortlessly master complex geometries. With up to six forming stages in combination with an intermediate clamping unit, they meet almost all requirements. The operation is simple and intuitive via touch panel. A sequence control makes every single movement of the respective forming stage user-friendly and individually freely programmable. Optionally, we equip our systems with electrical or hydraulic-numerical drives. For very short cycle times, these forming processes can be carried out step by step in transfer plants. The systems enable intuitive flow-based programming. Simultaneous axis movements ensure fast production processes and enable efficient and highly dynamic production. Technical data REB 660 6-60 mm . . .
used
Properties Used belt conveyor of manufacturer TRANS standard Color: Silver Incl. SEW motor and Guide material: steel Ideal for fast material handling Expertly disassembled and packed Condition: fully operational Material: Aluminium 1 STK. in stock Belt conveyors The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. Technical data: Mass of the belt conveyor Overall length: 7.100mm (1 x 800mm, 1x3900mm & 1x2400mm) Overall width incl. ...
used
Properties Used belt conveyor of manufacturer TRANS standard Color: Silver Incl. SEW motor and guide ideal for fast material handling Expertly disassembled and packed Condition: fully operational Material: Aluminium 1 STK. in stock Year of manufacture: 2007 Belt conveyors The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. Technical data: Mass of the belt conveyor Overall length: 7.180 mm overall width incl. motor: 700 mm Info ...
used
Properties Used belt conveyor of manufacturer TRANS standard Color: Silver Incl. SEW motor and guide (100 mm tall) Year of manufacture: 2009 Ideal for fast material handling Expertly disassembled and packed Condition: fully operational 1 STK. in stock Belt conveyors The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. Technical data: Mass of the belt conveyor Overall length: 1,920 mm overall width: 800 mm Information on the be ...
used
Nibbling machine trump, unloading 1000 mm, copying device, cutting, nibbling, slits, gills, beading, etc.
used
TRENNJAEGER Cold circuit saege - see pictures
new
Manufacturer: Trane Type: CRHR400 G2HBO Type: Compressor Technical data: Volume flow 145.3 m3/h compressor end pressure 28 bar speed 145 0 1/9p Voltage: 380/415 V 3PH 100/92 A 50 Hz New price EUR 11,043 Condition: new; ready for use
used
CNC Control Traub System TX 8D C-axis/ Driven tools Bar feeder Stamag DN42 Collector of the finished parts Chip conveyor Internal liquid cooling Very good condition Max. bar diameter 42 mm Turning length 220 mm Hydraulic chuck Chuck- max. turning dia. 140 mm Max. turning diameter 140 mm Max. turning diameter over bed 390 mm Spindle boring 42 mm Number of turret heads- 3 -1st turret 12 tools -2nd turret 12 tools -3rd turret 4 tool Tool holders VDI 30 X axis travel 200 mm Z axis travel 300 mm Spindle speed 5600 rpm Max. bar length 4200 mm Max. working bars in dia. 42- 7 Total power requirement 34 kW Interlocking cover Total dimensions: 7400x1900x2400 mm Weight 4500 kg
used
used
used
used
P109 - used approx. 50 m³ / 50,000 litres polyester silo / GRP-silo, vertically standing, with funnel and support frame 3 x 3 m, in good condition. Twice in stock. volume: approx. 50 m³ / 50,000 litres material: polyester / GRP diameter: approx. Ø 3.00 m height silo: approx. 8.50 m height with support frame: approx. 12.00 m The container can be used as storage silo for water, liquid feed, flour, whey, potato steam skins, salt brine, dried fodder, molasses, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers ...
used
used
used
used
used
used
Helix length at 40 kg / mm ° max. 10 mm Power 1800 Watt 470 strokes / min.
used
roll surface width: 450 mm roll diam. toproll: 203 mm roll diam. bottom roll: 203 mm output: 8,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Technical data: -Saw blade diameter 470 mm -Adjustable miter left + right up to 30 ° -Digital angle display -Cutting capacity 90 ° round 140 mm square 110 mm rectangle 290 x 70 mm round 45 ° 140 mm square 110 mm rectangle 190 x 70 mm at 30 ° round 130 mm -Sägeblattdurchm cutting speeds. 400 mm approx. 22.5 + 45 m / min -Sägeblattdurchm cutting speeds. 470 mm approx. 25 + 50 m / min -Hydr. Horizontal + vertical material clamp -Drive 400 V / 4 kW -Feeding speed of the saw blade, hydr. infinitely variable -Microsprüh - coolant system - space requirement approx. B H 1200 x 1950 x D 1700 mm -Weight 850 kg
used
Capping machine for Tetra Pak line year: 2008
used
Chiller Trane Capacity: 102kW przy R407 2x spiral compressor Trane: CSHA 150kè 1x spiral compressor Trane: CSHA 100KE 2 plate heat exchanger Year of construction: 2011 VERY GOOD CONDITION More photos and info on request, We have a lot of other used cooling equipment
used
Control system: TRUMPF Power on: 35071 h Cutting time: 14638 h Laser power: 3 kW Table dimensions: 3000 x 1500 mm Travel distances: X: 3000 mm Y: 1500 mm Z: 115 mm Max. Thickness of material Mild steel: 20 mm Stainless steel: 12 mm Aluminum: 8 mm Machine dimensions: 9300 x 4600 x 2200 mm Machine weight: 12000 kg
used
Alternative, new box bellows for Trumpf L3030 Siemens -from German production (it is not an original by Trump) -Y-axis (C) -Mapping: Trump ID: 1667805 / 939016 -New part
used
Tragrolle(n) industrial-grade diameter 80 mm length 500 mm steel ball bearings loads up to 200 kg Support rollers are suitable for heavy duty roller conveyors, roller supports, machine feeders etc. the roles are used but undamaged and have some light surface rust. the entire length of a roll is approximately 540 mm, the shaft has a diameter of 14 mm and an Aussparungvon ca. 10 mm on the shaft ends
used
Treif Falcon portion cutter with check weigher and sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, products up to -3° C, the machine is currently equipped for bonless products.
used
<b>Properties</b> Used belt of manufacturer TRANS standard <b>Technical data:</b> Mass of the belt conveyor Specification no.: U1009424-V0091 Nominal radius/inner radius: 600 mm Width: 900 mm Nominal angle/slope angle: 180Grad Strap type: KT96 Förderhöhendiff.: 500mm <b>Belt conveyors</b> The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.
used
TECHNICAL DATA: Work area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 3,200 watts Maximum sheet thickness mild steel: 20 mm Maximum sheet thickness stainless steel: 12 mm Maximum sheet thickness aluminium: 8 mm STANDARD equipment: -Closed machine frame with integrated laser unit -Automatic pallet changer -TFT color display -Position laser diode -Spraying device -Motion unit for high-precision machining -Additional highly dynamic axis YP -Drives with maintenance-free AC servo motors -Closed beam delivery -Conveyor for small parts and waste -NitroLine -FlyLine -Infeed end detection TRUMPF LASER: -CO2 laser TruFlow 4000 -High-frequency excitation -Maintenance-friendly Turbo centrifugal blower -Gas mixer (integrated) -Laser power control -Logbook function laser CUTTING HEAD: -Laserschneidopf with 5 "lens -Laserschneidopf ...
used
<b>Properties</b> Used belt of manufacturer TRANS standard <b>Technical data:</b> Mass of the belt Specification no.: U1009424-V0520 Nominal radius/inner radius: 600 mm Width: 900 mm Nominal angle/slope angle: 180Grad Strap type: KT96 <b>Belt conveyors</b> The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.
used
Hemco hydraulic tracing lathe Hopper feed very good condition...$7,900 obo Contact Fred (716) 433 4224 (12:00 noon is best time to call)
used
Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 1 mm Max. internal grinding diameter: 50 mm Grinding depth: 3 - 200 mm Centre height: 132 mm Workpiece spindle speeds: stepless from: 150 rpm up to: 1500 rpm Max. angle: 90 ° Taper in spindle:: 20 W Grinding spindle speeds: from: 16500 rpm up to: 33000 rpm Table speeds: stepless from: 0 m/min up to: 10 m/min Rotatable grinding spindle head (b-axis): 55 ° Voltage 50 Hz 3x: 380 Volt Workpiece spindle motor: 0.8 kW Drive for internal grinding spindle: 3 kW Machine´s weight about: 2000 kg Overall dimensions machine: Length: 1800 mm Width: 1000 mm Height: 1800 mm Various accessories: Grinding wheel dressing device Frontal grinding device 3-jaw chuck diameter: 125 mm Set of jaws hard Set of jaws Special ba ...
used
Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 1 mm Max. internal grinding diameter: 50 mm Grinding depth: 200 mm Centre height: 132 mm Workpiece spindle speeds: from: 150 rpm up to: 1500 rpm Max. angle: 90 ° Possible grinding-spindle speeds: from: 16500 rpm up to: 120000 rpm Table speeds: stepless up to: 10 m/min Voltage 50 Hz 3x: 380 Volt Workpiece spindle motor: 0.8 kW Drive for internal grinding spindle: 3 kW Machine´s weight about: 2000 kg Overall dimensions machine: Length: 1800 mm Width: 1000 mm Height: 1800 mm Various accessories: Grinding wheel dressing device
used
1250 x 2500mm Siemens 840D 3200w
used
Gluing machine for paper Tränklein Model ZW 300 Year 1995 Width 300 mm Options for PVA glue Available Direct
used
Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0 CNC Model: 0 Control: TRAUB SYSTEM TX 8i-p Operating hours: 46441 Technical data Number of axis total: 7 Number of spindles: 2 Turning length: 180 mm Number of axis total Max. bar diameter: 20 mm Spindle speeds: stepless up to: 8000 rpm Longitudinal travel (Z-axis): 205 mm C axis (spindle,resolution): 0.001 ° Back spindle: up to: 6400 rpm C axis (spindle,resolution): 0.001 ° Turret slide: number: 2 Upper turret head: number of tools: 8 number of driven tools: 8 Spindle speeds (turning tools): 12000 rpm X axis: 120 mm Lower turret head: number of tools: 7 number of driven tools: 7 Spindle speeds (turning tools): 6400 rpm X axis: 120 mm Z axis: 250 mm Y axis: -20 / +40 mm Counter-operation: number of tools: 7 number of driven tools: 3 Voltage 50 Hz 3x: 400 V ...
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0 Number of pallets: 0 CNC Brand: 0 CNC Model: 0 Control: PROTO TRAK A.G.E. 3 Technical data Number of axis total: 3 Table length: 1270 mm Table width: 320 mm Longitudinal travel (X-axis): 750 mm Transversal travel (y axis): 400 mm Vertical travel (z axis): 610 mm Table load max.: 600 kg Distance from vertical spindle to table: 610 mm Distance from spindle axis to slide ways: 480 mm Taper in spindle: 40 ISO Spindle speeds: number (steps): 2 from: 5 rpm up to: 3600 rpm Swivel range Vertical milling head: -90 / +90 ° Feeds (X, Y, Z): 5 - 3800 mm/min Vertical quill travel: 120 mm Quill feed speed: 0.04 / 0.08 / 0.15 mm/r Drill capacity in steel: 35 mm Threat cutting in steel M: 36 Milling capacity in steel: 80 - 150 cm3/min Boringout: 120 mm Voltage 50 Hz 3x: 415 Volt Milling ...
used
Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 0 Technical data Min. internal grinding diameter: 0.5 mm Max. internal grinding diameter: 20 mm Grinding depth: 100 mm Centre height: 60 mm Distance between centres: 150 mm Workpiece spindle speeds: number (steps): 3 from: 560 rpm up to: 1000 rpm Spindle hole: 12 mm Taper in spindle:: 12 W Grinding spindle speeds: from: 90000 rpm up to: 120000 rpm Rotatable grinding spindle head (b-axis): + 45 / - 45 ° Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 900 mm Width: 750 mm Height: 1300 mm Various accessories: Automatic internal grinding support: AMI 25 Set of flanges Set of collets: W 12 Lamp Air spindle Set of service tools
used
Trilo SU 60 and SU 40 leaves and grass loading blowers on 1-axis chassis 80 km/h with road approval (ABE), equipped with Honda gasoline engine or hydraulic drive motor, 4-5 m long suction hose with hand socket for effective work handling. Further loading blowers are also available for attaching to the vehicle board or suction containers with integrated turbine in various sizes and variants. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...
used
Control system: HEIDENHAIN iTNC 530 Working table length: 1,350 mm Working table width: 1,300 mm Maximum table load (uniform): 8,000 kg Spindle drive power: 25 kW Maximum vertical spindle speed: 14,000 spinmin Maximum distance between the spindle and the table: 950 mm Maximum feed speed Axis X: 30,000 mm/min Maximum feed speed Axis Y: 30,000 mm/min Maximum feed speed Axis Z: 30,000 mm/min Machine height: 4,300 mm Machine length: 3.550 mm Machine width: 3,810 mm Machine weight: 16,000 kg Accessories: Span-conveyors Full coverage of the workspace
used
Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 1.0 mm Max. internal grinding diameter: 50 mm Grinding depth: 200 mm Centre height: 132 mm Workpiece spindle speeds: from: 150 rpm up to: 1500 rpm Max. angle: 90 ° Possible grinding-spindle speeds: from: 16500 rpm up to: 120000 rpm Table speeds: stepless up to: 10.00 m/min Voltage 50 Hz 3x: 380 Volt Workpiece spindle motor: 0.80 kW Drive for internal grinding spindle: 3.0 kW Machine´s weight about: 2000 kg Overall dimensions machine: Length: 1800 mm Width: 1000 mm Height: 1800 mm