tr 60 sn used for sale

Manufacturer: Superfici, Type: UV Trockner, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 3 - 80, Number of lamps: 2, kW power 1 lamp: 10, Lampen Schräg eingebaut: no, Lampen gerade eingebaut: 3, Adjustable: Halblast, Power per lamp watt UV: 80, Working widht mm: 1300, od distance mm: ca 80 mm, Conveyor lenght mm: 4000, Working hight approx mm: 980, Feeding speed m/min: ca 5 -25, Exhaust air diameter mm: 3 X 200, Working widht mm: 1300,

Manufacturer: IST , Type: UV Trockner, Year: ca 2000, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 80, Working widht max mm: 1300, Number of lamps: 2, Lampen Schräg eingebaut: 2, Adjustable: halblast, Power per lamp watt UV: 80 W/cm, Conveyor lenght mm: ca 3000, Feeding speed m/min: 2 - 7, Working height in mm: verstellbar, Year :ca 2000

Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1999, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Compressed air bar: 155, Wight approx. kg: 1400, Year :1999

Manufacturer: Purete, Type: 3 Lampen UV Trockner, Year: 2017, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 5-100, Working widht max mm: 1300, Number of lamps: 3, kW power 1 lamp: 11,2, kW power all lamps: 37, Lampenlänge mm: 1400, Reflektor von oben abnehmbar: yes, Gesamtlänge UV Modul mm: 2300, Lamps straight installation: yes, Adjustable: halblast, Chain pitch mm: 45, Feeding speed m/min: 5-20, Conveyor: Stange, Drive power kW: ca,1,0, Exhaust air diameter mm: 3 X 120, Year :2017

Manufacturer: Trepel Hebebühne, Type: EH40/13/1, Year: 1996, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Year :1996

Manufacturer: SBA Trafo, Type: SFT, aus Maschine: UV Trockner, Prim:: 380, Sek:: 2000, Btr:: DB, Schaltgr.: C=4Uf, Hz 1: 50, V2: 6000,

Manufacturer: IMA, Type: Transportkette, FREETEXT1: Platten 74x182, FREETEXT2: 2x 31.680 mm mit Noppen, FREETEXT3: 2x 22.590 mm ohne Noppen,

Manufacturer: Bürkle, Type: UV Transportband, Year: 2001, Work piece width min-max mm: 1350, Lampen gerade eingebaut: 1, Conveyor lenght mm: 5000, Drive power kW: 1,1, Year :2001

Manufacturer: Trepel, Type: EN 10/10/0, Year: 2002, Lifting power kg: 1000, Length mm: ca 1400 , Width mm: ca 800, built-on roller conveyor: no, Year :2002

Manufacturer: Venyeskob, Type: Transportrollengang, Year: ca.1995, Working widht mm: 1300, Total hight mm: 950, Roller pitch mm: 150, roller diameter: 80, Length mm: 2500, Driven: yes, Working widht mm: 1300, Conveyor speed m/min: 5-25, Year :ca.1995

Transnorm belt conveyor GF 2000-1250-1100 RA2390 Technical data: Conveying length (NL): 2000 mm Framework width (NB): 1250 mm belt width (GuB): 1100 mm Framework width including Motor (MB): 1700 mm height (BH): 210 mm Side guides height: 400 mm Drive: SEW gear Motor with Movi-Mot Conveying speed m/s: freely adjustable between 0.5-1.5 m/s Electrical data: 50Hz V380-500, kW 1.1 Optionally available: Supports Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 1120 Belt width in mm: 1000 Driven: YES Engine type: SEW Eurodrive KW: 1,1/S1 Conveyor speed m / s: 0,4-1,3 scope of delivery: including side guides without supports, including Movimot frequency converter For individual, professional advice, simply contact us. Simply contact us by phone ...

Transnorm belt curve conveyor right GKF 180°-1270-1100-IR1200 RA1946 Technical data: Conveying length middle radius (NL): 5498 mm Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: good (used) Nominal / inner radius in mm: 1200 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 180° Driven:  ...

honing diameter: 9999999 mm stroke: 9999999 mm throat: 9999999 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Used Treiber from a Nagel MSU2 control No warranty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TRUMPF TruLaser 3060 laser cutting machine was built in 2007 in Germany by TRUMPF Werkzeugmaschinen Teningen GmbH. The machine, distinguished by its excellent precision and high productivity, is used for machining workpieces with a maximum thickness of 20 mm. The machining process is performed by a stable laser beam with a power of 4 kW and a thickness of only a few μm, which is generated by a reliable laser source with the highest energy efficiency. The automatic pallet exchange system, in turn, allows simultaneous loading and unloading during the cutting process, reducing machine downtime to a minimum. The offered TruLaser 3060 laser cutting machine also features a number of state-of-the-art technical solutions that significantly affect the cutting quality and expand the machine’s machining capabilities. This includes, for example, the ControlLine distance measuring system, which ...

Crucible in top condition with ink box, pressure shut-off and good ink rollers. Crucible 26 x 34 cm -

3000w Year: 2018 5 Axis Fiber Laser 3000w Y Axis: 1500mm Twin Cell Machine

Trumpf monitor Delem mod. DA 65

Bacon Cutter Treif Felix 100 CE Stainless Steel, 400 V, 3 A, 1.0 kW, 173.5 kg, shelf PE, feed chute 30x10x10 cm, phase turner, rotating field detection, 1 gate set, 1 spare knife, total dimensions 95x75x105 cm, bacon, ham, sausage and other types of meat can be cut just as easily as cheese, fish, fruit and vegetables, capacity approx. 800 kg / h, year of construction 2009

Key data: 65 mm

CNC Turning and Milling Center CNC lathe used CNC universal lathe Manufacturer: Traub Type: TNA 300 Year of Make: 1996 Spindle ø 65mm Tailstock Powered tools Conveyor Control TX8H FlexIPS Collet chuck with collets from 5mm to 65mm Three-jaw chuck Various tool holders fixed, rotating and angle-rotating Etc... incl. bar loading magazine Traub DNH 61 3000, year of construction 1996 incl. many accessories! Location of the machine: Nahe 93047 Regensburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.

A complete Ernst Nagel brochure machine is sold Composed of Foldnak 8 SP Plus Online Trimmer Machine is used and fully functional. The machine can and should be viewed and tried out on site, as warranty or guarantee is excluded Price is net, VAT can be claimed.

Volume of work tank 200 l Usable volume 125 l Max. workpiece (diagonal) 170 mm Screening area 2190 cm² max. centrifugal force 49,000 N There are 2 lifts available!

Drum mixer with bagging flap, solid very heavy version, drum and mixing spiral stainless steel. Year of construction not known. Three-phase motor rewound, condition see pictures

Transnorm curved belt conveyor left bend 180°-650-500 IR600 RA2398 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 180° nominal/external width (NB): 650 mm belt width (GB): 500 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,5 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2012 condition: very good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 650 Belt width in mm: 500 angle: 180° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,5 scope of delivery: withou ...

Transnorm curved belt conveyor replacement part TS1500 RA2399 Technical data: Model: TS1500 Transnorm Item number: 6004-2RS 12 pieces inkluding: Bearing Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: No information

Punching capacity: 165 kN working area: 2070 x 1280 mm plate thickness: 6,4 mm control: CC 220 workpiece weight: 150 kg punch diameter: 76,2 mm : 80 m/min : 55 m/min weight of the machine ca.: 8000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Trumpf Model: Trulaser 5060 Type of Machine: CO₂ Laser Cutting Machine Technical Specifications: Working Area: - X-axis: 6000 mm - Y-axis: 2000 mm - Z-axis: 115 mm Max. Workpiece Weight: 2800 kg Speed: - Axis-parallel: 200 m/min - Simultaneous (X and Y): approx. 300 m/min Accuracy: - Smallest programmable increment: 0.001 mm - Position deviation: ±0.1 mm - Average position scatter: ±0.03 mm CNC Control: - Model: Siemens Sinumerik 840D - RAM: 64 MB - Monitor: 12" TFT - Program memory: 500 MB for NC programs - Disk Drive: 3.5" - OS Platform: Windows NT Find more here - / Contact us at -

Inv. Num. : 8332 Type: TrumaBend V50 Producer: Trumpf Generated: Parameters: Compressive force: 85 t Maximum bending length: 1275 mm Distance between frame walls: 1040 mm Machine height: 2375 mm Machine length: 1930 mm Machine width: 2030 mm Machine weight: 4750 kg

This machine integrates track building, peeling, and brushing functions - Hydraulic lifter - Electric Control Panel – Operates on 380V / 220V - Hand brusher (Yellow) Find more here - / Contact us at -

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 24553; Gross weight [kg]: 24553; Engine: 4016-61 TRG3; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system

Transnorm conveyor belt GF 2100-400-300 RA2405 Technical data: Make: Transnorm Model: TS 6565 motor-driven belt diverter D=65mm Conveyor length (NL): 2100 mm Frame width (NB): 400 mm, 600 mm with motor Belt width (GuB): 300 mm Overall height (BH): 200 mm Support feet: optionally available Conveyor speed (v m/s): 2.0 Drive: Nord Electrical data: 50Hz V380-500, kW 1.1 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 condition: Ausstellungsstück Conveying length in mm: 2100 Nominal / outside width in mm: 400 Belt width in mm: 300 Driven: YES Engine type: Nord KW: 1,1/S1 Conveyor speed m / s: 2 scope of delivery: without supports and side guides For indi ...

Max. workpiece length ... 3000mm Max. workpiece width ... 1500mm Max. sheet thickness... 12mm Laser power... 2000W Total power requirement ... 71kVA Machine weight ... 11500kg L x W x H ... 9800x5300x2000mm The machine is in good condition, possible to test under power.

Inv. Num. : 8355 Type: TRX 100V Producer: TEDERIC Created: 2008 Parameters: Clamping force: 100 t Injection capacity: 228 cc Injection mass: 208 g Height of the clamping plate: 550 mm Width of the clamping plate: 540 mm Distance between uprights (horizontal): 360 mm Distance between uprights (vertical): 360 mm Ejector stroke length: 100 mm Spindle power: 11 kW Machine length: 4100 mm Machine width: 1100 mm Machine height: 1800 mm Injection weight: 3500 kg

Roll wrapping and settling Trima BA1000 - Manufacturer: Trima Triebeser Maschinenbau GmbH - Type: BA 1000 - Year of construction: 2014 - Voltage: 400 Volt / 50Hz - Fuse: 16A - Power: 1.9 kW - Weight: 680kg - External dimensions approx. 220x105x215cm WxDxH

3 Pieces Container Units with Diesel Engine Engine Type: Perkins 4016-61 TRG2 Year: 2023 Hours: 2 Power: 2000 kVA Cooling: Water, Radiator Speed: 1500 1/min Tank: approx. 2000 litres Generator: Stamford HVSI804R Voltage: 10 kV, 50 Hz Excellent condition, like new! Was used as an emergency power system. Subject to prior sale - errors possible! Internal reference number: E-1004-97

Elma Troyan motor Type: T 100LA 8/4 CB B14F 130-481 380 volt 0,7/1,1 kW 700/1415 rpm

Type: MI 70 FP F3 30/1 ratio

Type: SW/075T

Type: T 132H 4B 220/380V 7,5 kW 1445 rpm

Circumferential diameter over bed ... 500mm Turning length ... 2000mm Max. workpiece weight ... 300kg Circumferential diameter via support ... 270mm Spindle bore ... 52mm Spindle speed ... 22-2000 rpm Main engine power ... 5.5kW L x W x H ... 3640x1100x1580mm Machine weight ... 1940kg The machine is in good condition, possible to test under power.

Punching capacity: 220 kN plate thickness: 8 mm working area: 2535x1280 mm sheet thickness for stainless steel: 4-6 mm Accessories: -Setup cassettes -Table with ball rollers Youtube video link: https://www.youtube.com/watch?v=1RlPrkZPN0Y&ab_channel=BaestleinGmbH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tube bending machine - mandrel bending machine TRACTO-TECHNIK Type Transfluid DB 2060 KSerien. No. 70173 Year of construction 2004Bending capacity (steel) max. 76.1 x 3.0 mmBending capacity (stainless steel) max. 76.1 x 1.65 mmBending tool max. 70 x 2 mm (for stainless steel)Pipe slide length 4572 mm (4300mm)Bending radius max. 150 mmBending direction clockwise (right)Bending angle max. 190Bending head speed at 90 8 sec. Hydraulic operating pressure 200 barEngine power 3 KWnet connection 400 Volt, 50 Hz, 15

Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible.

A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible.

A simultaneous turning center Spinner with three turrets and extensive accessories, spare parts and tools is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: Speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: Speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turret 1/2/3: Turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Including loading magazine Top Automazioni, cooling/high pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tool package  ...

Turning diameter over bed/face slide: 360mm/160mm, center distance: 800mm, travel X/Z: 205mm/810mm, speed: 3150rpm, spindle bore: 60mm, tool positions: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3300mm/1800mm/1800mm, weight: approx. 3300kg, control: Traub System TX-8. An on-site inspection is possible.

Various machines and peripheral equipment for metalworking are available. 1) Troma TC 300. 2) Sigloch and Schrieder Boromat 14 4. 3) Glaser. 4) Renard DM1-R. On-site inspection is possible.

A laser system with 1 loading station and two stations each is available. Welding fixtures: 4, laser power: 3.3kW, beam source: TruDisk 3302 disk laser, workpiece dimensions X/Y/Z: 300mm/100mm/100mm, material thickness: 1.5mm, welding speed: 5600mm/min, welding optics: Trumpf BEO D70, operating hours: approx. 70000h. Documentation available. On-site inspection is possible.

Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible.

Working area X/Y/Z: 3000mm/1500mm/115mm, laser power: 3200W (3,2kW), laser type: Trumpf Trumatic TC L 3020, max. material thickness steel: 20mm, cutting heads: 2x. Machine dimensions X/Y/Z: approx. 4600mm/9300mm/2000mm, weight: approx. 10500kg, laser hours: 56738h, beam hours: 26243h. Including cooling circuit filter unit Riedel and pallet changer. The door of the machine has an error in the acknowledgement. This can be easily solved by pressing the acknowledgement button and the cancel button. Documentation available. On-site inspection is possible.

Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.