tower used for sale

: neu : ca. 12 Wochen ab Auftrags : Türkei : 316850 € : 4 kW : Wechseltisch : 20 mm : 10 mm : 12 mm : 6 mm : 10 mm : 3.060 x 1.530 mm : 3060 mm : 1530 mm : 160 mm : 3.048 x 1.524 mm : 235 kg/m² : 120 (HD-FL 160 m/min) m/min : 120 (HD-FL 160 m/min) m/min : 170 (HD-FL 226 m/min) m/min : 28 (HD-FL 35 m/s²) m/s² : +/- 0,05 (HD-FL +/- 0,03 mm : +/- 0,05 (HD-FL +/- 0,03 mm : 19 s : 10750 mm : 6210 mm : 9350 mm : 6000 mm : 2800 mm : 3350 mm : 1700 mm FIBER LASER HESSE HD-F MADE BY DURMA The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. This system can also be optionally equipped with a linear motor drive for even higher speed and accuracy. The system consists of the following components: Shuttle table system in longitudinal direction for simultaneous loading/unloading and cutting to reduce non-produ ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 469100 € : 15 kW : Wechseltisch : 35 mm : 35 mm : 35 mm : 15 mm : 20 mm : 3.060 x 1.530 mm : 3060 mm : 1530 mm : 160 mm : 3.048 x 1.524 mm : 235 kg/m² : 120 (HD-FL 160 m/min) m/min : 120 (HD-FL 160 m/min) m/min : 170 (HD-FL 226 m/min) m/min : 28 (HD-FL 35 m/s²) m/s² : +/- 0,05 (HD-FL +/- 0,03 mm : +/- 0,05 (HD-FL +/- 0,03 mm : 19 s : 10750 mm : 6210 mm : 9350 mm : 6000 mm : 2800 mm : 3350 mm : 1700 mm FIBER LASER HESSE HD-F MADE BY DURMA The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. This system can also be optionally equipped with a linear motor drive for even higher speed and accuracy. The system consists of the following components: Shuttle table system in longitudinal direction for simultaneous loading/unloading and cutting to reduce non-pro ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 342772 € : 6 kW : Wechseltisch : 25 mm : 15 mm : 20 mm : 10 mm : 12 mm : 3.060 x 1.530 mm : 3060 mm : 1530 mm : 160 mm : 3.048 x 1.524 mm : 235 kg/m² : 120 (HD-FL 160 m/min) m/min : 120 (HD-FL 160 m/min) m/min : 170 (HD-FL 226 m/min) m/min : 28 (HD-FL 35 m/s²) m/s² : +/- 0,05 (HD-FL +/- 0,03) mm : +/- 0,05 (HD-FL +/- 0,03) mm : 19 s : 10750 mm : 6210 mm : 9350 mm : 6000 mm : 2800 mm : 3350 mm : 1700 mm FIBER LASER HESSE HD-F MADE BY DURMA The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. This system can also be optionally equipped with a linear motor drive for even higher speed and accuracy. The system consists of the following components: Shuttle table system in longitudinal direction for simultaneous loading/unloading and cutting to reduce non-pr ...

Description Moretto double tower wheeled dehumidifier hopper capacity: 60 dm3 air flow: 50 m3/h temperature range: 50°-150° C

Description Single tower dehumidifier hopper capacity: 100 dm3 air flow: 70 m3/h temperature range: 50-150 C

For LDPE MDPE and BIO Web width from 600 mm up to 1600 mm Throughput rate 100/160 kg/h depending on materials Max production speed 80 Min/max thickness 30/200 my (tolerance sigma 2 +/- 8% Extruder with screw diam. 65 mm. 30 L/D MELT control Oscillating die diam. 100-200-300 mm. gap 1,4 mm. Blow Up Ratio 1,5 – 4,5 high capacity cooling ring with inverter on electric fan 7,5 kw Calibrating basket 1.000 max diam. Gusseting units Pull off unit min/max width 600_1600 mm. Stretching rollers 1.800 mm wide Corona treatment Back to back winding station type BA 2/1.800 Max reel diam. 1000 mm. N.2 slit and seal units Supporting tower height approx 9,0 mt. Construction year 2003 Excellent conditions Mounted but disconnected

MP BLOWN FILM EXTRUDER EBHD 80, for HDPE and LDPE, constructed in 2005, excellent conditions, Barrel Screw: Φ80 mm with mixing zone LD 28/1 nitride hard chromium steel, Barrel heating zones: 4 zones thermal power 4 KW each plus 1 filter thermal zone 4 KW., Screw Length (L/D) : 28/1, Screw Diameter (mm): 80, Screw Speed (R.P.M.) : 65, Cylinder Total Heating (KW): 16, Flange Heating (KW): 4, Number of Die Heating Zones: 3, Die Total Heating (KW): 6,6, Cylinder Cooling: 4 separates fan motors for each individual thermal zone, Cylinder Cooling Power (KW): 3,5, Installed Electric Power (KW): 70, Max Output (KG/H): LDPE 100 Kg/H, HDPE 90 Kg/h, Film Width: (Min-Max) 280 mm – 1000 mm, Film Thickness: (Min-Max) 0,018-0,200 mm, Main Driving Gear Reducer: Monobloc Reducer Italy Made ROSSI SPA”, Main Motor: AC 3 Phase Inductance Motor 30 KW (40 HP)., Main Motor Control Driving: (VFD Inverter MI ...

Collating machine Bourg BST-10 Two variants: 1. c.p. bourg BST-10 two towers + BDF 2. C.P. BOURG BST-10 A Tower + BDF Art.Nr. PS6044

Inv. Num. : 7039 Type:- Producer: ONI Created: 2010 Parameters: Cooling capacity: 250 kW Equipment: Outdoor Cooling Tower

Hardly used exhaust fan - was only in operation from 2015 - 2019 and was then dismantled again Data sheets available Engine power: 110 kW Flow rate 80,000m³/h Matching exhaust tower with heat exchanger can be purchased as an option, but is very large (3.33.810m)

This Feeler FMH-500 horizontal machine center was made in the year 2007 in Taiwan. The machine has a spindle speed of 10000 rpm and 2 changing pallet tables. Accessories included in the offer: laser tool gauge, through-spindle cooling, 10,000 revolutions, 2x tower.

Max. size= 50 x 35 cm, Availability= 102023, Booklet-Making line consist of: collating tower DC-10000S with 10 suction stations format A3/A4/A5 stitching and folding unit DBM -250 with automatic format setting with stitching heads Hohner trimmer DC – 48TW compressor LOT Loaded in truck or container

Key data: 490 mm, 515 mm

Machine Details Stock-No. 1105-04004 Type of machine CNC Turning- and Milling Center Make MORI SEIKI Type NL 1500 SY Year of manufacture 2005 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight basis ex Warehouse Technical details turning diameter 490 mm turning length 515 mm control MSX-850 max. bar capacity 52 mm Travel -X Axis 280 mm Travel -Z Axis 490 mm max. speed main spindle 6000 min-1 spindle taper 1 A2-6 C - Axis 0.001° Spindle Bearing Diameter 110/75 mm No. of tools in turret 1 12 Shaft Cross Cut 25 x 25 mm Shank diameter 50 / 32 mm turret change time 0.25 s Max. Spindle Speed Driven Tools 6000 min-1 rapid power traverse in X-and Z direction 30 m/min Rapids C - Axes 400 min -1 drive capacity - spindle motor 18.5 kW power capacity - driven tools 5.5 kW swing diameter over face slide 278 mm great ...

Lang Technik Automation Eco Compact 10 1x Lang Automation 1x zero-point clamping tower 1x actuation clamping module

Description: serial number: 0233 control : Okuma OSP U100L  , travels: X-axis: 800 mm Y-axis: 800 mm Z-axis: 700 mm 2 pallets, dimensions: ,500 x 500 mm (x2) pallet rotation : 1°/360° spindle taper: SK50 spindle speed: 5000 rpm spindle power: 22/15 kW toolchanger positions: 60 internal spindle cooling chip conveyor accessories: , ready for workpiece probe ready for tool probe (repair required) approx. 15 working tools  , the accessories do not include the clamping tower (Spannturm), which is shown in one of the photos together with the machine  , the machine will be partly dismantled and ready for loading on low plate truck with width of 2,8 m  , please also have a look the the videos and the PDF document of this machine z-motion: 700 mm, x-motion: 800 mm, y-motion: 800 mm, control: Okuma OSP U100L, pallet table size: 500  ...

The SEEMA CS200m carton sealing machine offers all the advantages you can expect from a reliable carton sealer. The lower and upper conveyor belt drive also transports flat or tower shaped carton formats and pastes them. Width: min. 175mm - max. 500mm Height: about 450mm Strom / Volt: 240 Optional accessoriesReplacement drive belts 1345x50mm (ID6108)  More then 300 machines new and second hand on our seema .de

Description: The almost new 8 MW transmission test station is operated from a central control station. Some of the test energy input can be fed back into the power network. Inventory number: 9000945 , Year of construction: 2018 Data on the three-phase asynchronous machines Nominal output: 7.7MW Maximum output: 8.47MW Nominal speed: 1150/min Maximum speed: 2200/min Nominal torque: 63940 Nm Maximum torque: 70330 Nm Main shaft data Nominal speed: 8.99 rpm Nominal torque: 6000kNm Maximum torque: 8800kNm Cooling system Cooling capacity of the cooling tower: 900kW Coolant volume flow: 160m³/h at 4 bar and 30°C Nominal pressure hydraulics Hydraulic system main shaft: 250 bar at 100 l/min Hydraulic system quick coupling: 300 bar at 1 l/min Hydraulic system generator (lifting/lowering) 150 bar at 8 l/min Oil system: 8 bar at 120 l/min General data Operati ...

faceplate diameter:1000 mm swing diameter:1350 mm turning height:1070 mm total power requirement:75 kva weight of the machine ca.:25 t dimensions of the machine ca.:5,3x4,6x5,5 m Standard accessories: Chips Conveyor & Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication in Guide way 4 Jaw Manual Chuck 1000mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Tower Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System installed options: Air Conditioner For Electrical Box Coolant Through Spindle Filter Of Coolant Water CE Mark Transformer

turning diameter:1250 mm swing diameter:1100 mm turning height:1000 mm total power requirement:37/45 kW weight of the machine ca.:18 t dimensions of the machine ca.:4500x2520x4605 mm Standard accessories: Chips Conveyor & Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication in Guide way 4 Jaw Manual Chuck 1000mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Tower Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System installed options: Air Conditioner For Electrical Box Coolant Through Spindle Filter Of Coolant Water CE Mark Transformer

R26097/16 EDELMANN Continuous Printing Machine Model: COLOR PRINT V72 SL Built: 2008 Paper web width: max. 720 mm Printing width: max. 710 mm Availability: approx. 12/2011 Servo drive Microprocessor control R/R, R/B Flattening: roll diameter max. 127 cm BST web edge and center control Track length control 2 offset printing towers Automatic inking unit washing Railway turning device Hole punching unit Cross cutters UV dryer Plough folding system Available: by arrangement

MATEC Stappler tipping bucket type 2 The tipping bucket can be locked with a bolt with cotter pin so no tipping is possible. The tipping buckets can be supplied also with a hydraulic tilting device. The blades are 1950 mm wide and type 2 1300 mm deep. The standard blade height is 450 mm. Solid wall or lattice towers can be ordered as accessories. The nominal weight of the shovel is 2000 kg. Each blade has 4 lifting eyes for crane handling. 4 mm thickness, corners and a replaceable wear bar reinforced permit prospecting. Other blade dimensions are possible upon request. Year 2017 New machine Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041  ...

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystallizer. C ...

2 identical machines are available ! Make : MAZAK Type: FF-660 Built: 2000 Control : FANUC 18iM Technical Dataen Axles ( X/Y/Z ) : 660 x 660 x 660 mm Pallet size: 500 x 500mm Tool holder: ISO 40 Number of tools: 24 Station Spindle speed: 15000 rpm Engine power: 15kW B-axis movement: 1 degree indexation Accessories/Description: Both machines are still in production, with the machines a total of 4 towers and 80 tool holders. The cover of the Y and Z axes has been renewed. various tools are delivered with the machine. Chip conveyors and documents are available.

3 MW Siemens Steam Turbine SST-110 TWIN AFA 46 K Year: 2010 Hours: 5,200 Capacity: 3,224 kW Volts: 400 HZ: 50 Condition: Very Good Scope of Supply: Complete Turbine Power Station Turbine and alternator Control Panel Condensor Cooling Towers Spilling Unit Switchgear Synchronisation panel Transformer Piping / wiring / pumps Boiler not included Inspected in Very Good Condition. Dismantled and loaded to your transport.

Printshop Package: Folding machine Horizon AFC-504 ACT - with perforating device, or double central cut - 2 swords - folding from DIN A 3 to DIN long possible - Fold types preset under program control - only run with small editions - compact design Price: on request 4 color offset machine Heidelberg GTO VP 52 convertible 2/2 front and back printing Plus version year: 1986 - ALCOLOR with BALDWIN cooling unit - CPC 11.01 - Grafix powder device Replacement, 6 new rollers like photo Price: on request Brochure production line Two towers Horizon MC-8 SPF-10II - FC-II - 1 loop stitching, - Accessories for small formats, corner stapling possible - 1 vibrator (collect carbonless records, etc.) - German Manual Price: on request cutting machine Polar EM 76 - with air table facility - 2 HD knives - Control panel board 2016 new - with hydraulic scissor lift tab ...

Key data: 500 Mazatrol, 500 640 M, 730

Pallet length: 500 mm Pallet width: 500 mm Longitudinal X: 730 mm Cross Y: 730 mm Vertical Z: 740 mm Number of pallets: 20   Positions ATC: 325   CNC Brand: Mazatrol CNC Model: 640 M Make: MAZAK Type: PFH 5800 Control: MAZATROl 640M YOP: 2005 20 x Pallet stations ATC with 325 positions Tooling package ca 150 pieces Granit clamping towers 18 x X – Travel:               730mm Y – Travel:               730mm Z – Travel:               740mm B-Axis indexing:          360000° Table Length:             500mm Table Width:              500mm Table load:               500Kg Number of pallets:      &n ...

Printshop Package: Folding machine Horizon AFC-504 ACT - with perforating device, or double central cut - 2 swords - folding from DIN A 3 to DIN long possible - Fold types preset under program control - only run with small editions - compact design 4-color offset machine Heidelberg GTO VP 52 convertible 2/2 front and back printing Plus version year: 1986 - ALCOLOR with BALDWIN cooling unit - CPC 11.01 - Grafix powder device Replacement, 6 new rollers like photo Brochure production line Two towers Horizon MC-8 SPF-10II - FC-II - 1 loop stitching, - Accessories for small formats, corner stapling possible - 1 vibrator (collect carbonless records, etc.) - German Manual cutting machine Polar EM 76 - with air table facility - 2 HD knives - Control panel board 2016 new - with hydraulic scissor lift table - shaker Offset printing machine Manufacturer: H ...

Make and Model: GE WHG-125 Year: 2011 Hours: 6000 approx. Year : 117 HZ : 50/60 Voltage: 400/480 V Scope of supply: Each ORC skid has its own heat exchangers for evaporation and condensing of the refrigerant (working fluid). You would need to install a water heat source and a water cooling circuit, no cooling towers or blowers are included with what we have in storage. Condition: These units have been decommissioned and been in storage since May 2016. Unit 1 and 2 had a report of an MBC fault (magnetic bearing controller). Unit 3 has several parts missing due to a failure in the power electronics. Some parts of the Power electronics, PLC, speed drive for the refrigerant pump are missing. Unit 4 had a failed heat exchanger and filled the ORC with water, would need stripping to determine the full extent of the repairs needed. Extra: These units run on a working fluid (refri ...

Key data: 117

Make and Model: GE WHG-125 Year: 2011 Hours : 16,000 & 35,000 Capacity kW: 117 HZ : 50/60 Voltage: 400/480 V Scope of supply: Each ORC skid has its own heat exchangers for evaporation and condensing of the refrigerant (working fluid). You would need to install a water heat source and a water cooling circuit, no cooling towers or blowers are included with what we have in storage. Condition: The containerised units were decommissioned towards the end of 2018. Both of the units were operational before decommissioning. Unit 1 has the upgraded 3600 MBC (magnetic bearing controller). Both of the units are containerised at present but can be removed. Extra: These units run on a working fluid (refrigerant R245Fa) that does not come with the units as this was sent for recycling after commissioning. This will need to be purchased and filled during installation and commissioning.  ...

Offer consists of: - Complete set of extra blow air for 3 towers - compatible with: Horizon VAC-100, VAC-1000 - Weight: On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing offer

Make and Model: GE WHG-125 Year: 2011 Hours : 7155 and 6849 Capacity kW: 117 HZ : 50/60 Voltage: 400/480 V Scope of supply: Each ORC skid has its own heat exchangers for evaporation and condensing of the refrigerant (working fluid). You would need to install a water heat source and a water cooling circuit, no cooling towers or blowers are included with what we have in storage. Condition: These units have been decommissioned and been in storage since May 2016. Both of These units were operational at the time of decommission. Extra: These units run on a working fluid (refrigerant R245Fa) that does not come with the units as this was sent for recycling after commissioning. This will need to be purchased and filled during installation and commissioning . Price: €70,000 each

:::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 0i-TC Main spindle nose: ASA 6 Main spindle self-centering diameter: 250mm Main spindle bar passage: 65mm Turning diameter: 280mm Turning length: 550mm Number of turns main spindle: 4000 Number of Tool Towers: 1 Number of tool places first turret: 12 Number of motorized first turret: 12 First turret tool attachment type: VDI 30 X axis travel first turret: 245mm Z axis stroke first turret: 600mm Rapid advances linear axes X Y Z: 36m/min Tailstock: yes Barrel stroke: 190mm Chip evacuator: carpet Number of motorized tool holders supplied: 2 Number of fixed tool holders supplied: 10 :::D IMENSIONS AND WEIGHT::: Length: 3415mm Width: 1786mm Height: 1780mm Weight: 3900Kg

:::TECHNICAL SPECIFICATIONS::: CNC Model: Siemens CNC Version: 840D Main spindle nose: ASA 8 Inverted lathe: yes X axis spindle travel: 850mm Z axis spindle travel: 250mm Stoker or spare parts warehouse: yes Main spindle power: 43Kw Main spindle self-centering diameter: 315mm Turning diameter: 250mm Turning length: 125mm Number of turns main spindle: 4300 Number of Tool Towers: 1 Number of tool places first turret: 12 Number of motorized first turret: 12 First turret tool attachment type: VDI 50 Rapid linear axis feeds X Y Z: 45m/min Chip evacuator: carpet Number of motorized tool holders supplied: 1 Number of fixed tool holders supplied: 10 :::D IMENSIONS AND WEIGHT::: Length: 3380mm Width: 1300mm Height: 2900mm Weight: 7000Kg

Gathering machine Bourg BT-12 Equipment: Two towers c.p. bourg BT-12 and BT-15 Booklets Bourt ARG-T Folds Bourg PA-T Scneiden Bourg TR-t Hohner stitching heads The machine comes from an authority

brochure system Manufacturer: FKS Model: Duplo 5000 year: 2008 Counter total: 780656 2x FKS/ Duplo gathering machine DC-10-60 1x transfer unit LUL-HM including dowry compartment and manual system/ -insert 1x FKS/ Duplo bridge between the towers 1x FKS/ Duplo brochure machine DBM-500 1x FKS/ Duplo front trimmer DBM-500 T 1x FKS/ Duplo long tape delivery DBM 500 LS 1x blown air support for stitching station 2x ring eyelet stitching heads 1x DBM-500 P booklet repress unit 1x short cover kit 1x FKS/ Duplo pallet lowering table STR (right display) Price: on request

Gathering machine Bourg BST-10 2 Towers Stitching Folds Cutting

Manufacturer: HORIZON Model: Brochure line with 2 towers MC8a, MD8m, SPF 10 II, FC-11, vibrating table Year: 1993 Equipment: 2 towers, stitching, folding, front trimming print counter: unknown Availability: from July 2022 Condition/ Defects: stapling can only be triggered manually, Error on circuit board Price: on request

Duplo 5000, year 2010, 3 towers

CNC Model: Fanuc CNC version: 18i-T Main spindle nose: ASA 6 Main spindle power: 22Kw Main spindle self-centering diameter: 210mm Main spindle bar passage: 65mm Turning diameter: 250mm Turning length: 500mm Number of turns main spindle: 4000 Number of Tool Towers: 1 Number of tool places first turret: 12 Number of motorized first turret: 12 X axis travel first turret: 215mm Z axis travel first turret: 510mm Rapid linear axis feeds X Y Z: 24m/min Counter-spindle: yes Spindle nose: ASA 5 Number of spins: 4000 Power against spindle: 3,7Kw Bar passage: 43mm Z stroke counterspindle : 515mm Bar loader model and brand: Iemca Master 880 Chip evacuator: carpet operated Presetting: yes Number of motorized tool holders supplied: 4 :::D IMENSIONS AND WEIGHT::: Length: 4000mm Width: 1900mm Height: 1800mm Weight:  ...

Key data: 9000 , 6000

9MW Wärtsilä W20V34GS Natural Gas Engine Generating Set. Hours: 17,450 Year: 2007 kW: 9000 HZ: 50 V: 6000 Fuel: Natural Gas Complete plant with: Engine, Alternator 750 RPM, Frame, Control System, Gas Line, 2 Radiators, 2 Cooling Towers, Synchronization Panels, Switchgear, Transformer 6,000V / 20,000V. Other accessories as in the photos. Service done at 16,000 hours. Available for Sale Now

Compounding machine Horizon MC-80 Two towers with vibrating table Government machine

Key data: 125

Sell a total of 8 clamping towers from Allmatic, each with 4 Allmatic vices installed 5 of which TC 125 3 pieces of which NC 125 Condition: Used

Window processing line, CNC window production system, window angle system -Double end tenoner, make: Gubisch, type: DST H -Year of construction: 1994, serial no.: 7593 -2x 2 tool towers with 5 heads each -built tools from: Leitz -Shaft mount: Ø 50 mm -Max. Tool: Ø 350 mm -Max. Tool height: 650 mm -4x milling motors 11 kW 2800 rpm -Control, make: Gubisch -Roller conveyor, L/W: 4,000 x 200 mm -Milling machine, make: Gubisch, type: FN2000 -Year of construction: 1994, Ser.-No.: 7490 -4 milling shafts -4x milling motors 9.2 kW 2800 rpm -Tools from: Leitz -Shaft support: approx. Ø 40 mm -Max. Tool: Ø 230 mm -Max. Tool height: 350 mm -m. Feed roller conveyor, L/W: 4,500 x 150 mm -Discharge roller conveyor, L / W: 4,000 x 200 mm -Tool cabinet -Switch/fuse box

Clamping towers Base plate dimensions: 350 x 350 x 20mm 4 clamping surfaces = 220 x 450 mm each Alternating grid of bores 40 mm, M12 and 12H7

Signal towers, signal lights, signal lamp, indicator light -LED lights: 7 pieces, accessories kromschröder DL, DG ovp -Type: 230V red/green Order No. 74923275 -Price: complete -Dimensions each: 110/15/5 mm -Weight: 0.01 kg/pc.

NATURAL GAS THERMAL POWER PLANT CONSISTING OF 3 CUMMINS 1750GQPB GENERATOR SETS (QSV91-G ENGINE) Fully equipped natural gas thermal power plant. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251030), comprising Cummins QSV91-G Engine (66300362) and PCS; with 7695 operating hours. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251410), comprising Cummins QSV91-G Engine (66300363) and PCS; with 8746 operating hours. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251420), comprising Cummins QSV91-G Engine (66300359) and PCS; with 8061 operating hours. Electrical panels and controls for the respective equipment; DMC 300 (paralleling equipment); QTA (Automatic Transfer Switch); Noise attenuators; 02 Water towers, pumps, and associated cooling system pipes; 01 small transformer, switches, and cable trays; Maintenance switches and ...

9222022 Gas Generator CAT 4.5 Mwe and 4.3 MWe with Auxiliaries Two separate 4.5 MW and 4.3 MW / 50 Hz natural gas engine driven generating sets with auxiliaries. Manufacturing years 2016 and 2014, total operating hours 3000 and 1000 hours only. Engines are CAT CG260-16 type high efficiency 1000 rpm units coupled Marelli’s 11 kV air cooled alternator. Both units with full CAT service records, still installed and can be tested. Both units have engine cooling made with two closed loop cooling radiators, one for HT and another for LT engine cooling circuits. Equipment is close to new like condition. Technical characteristics Manufacturer: CAT, USA Manufacturing year: 2014 and 2016 Engine type: CAT CG260-16 Engine speed 1000 rpm Operating hours since new 3000 and 1000 only Alternator CAT/Marelli MJH 800 MC6, Cos Fee 1 Power output 2014 4100 kWe continuous load Power ou ...

DUPLO System 5000 2 towers composed of DC 10/60, DBM 500T and DBM LS1

HEIBER & SCHRÖDER, year: 1999, Model: CE850, -2 tracks, -with 850mm clearance, -two plates, -two forming towers, -8 glue points., Year: 1999, model: CE850