tower crane used for sale

Description The TOWNSEND 9000 Automatic Skinner is a device that uses technology that allows the user to achieve high efficiency during the skiving process. The 9000A is the ideal solution because it removes the skin without damaging the meat. The skinner offers a wide range of possibilities that can be used for various types of meat, depending on the needs of the producer. The TOWNSEND 900 is a very safe, efficient, precise and reliable device in its class. The machine is an ideal solution for small and large processing plants. The skinner has a capacity of 1300 - 1800 pieces/h. Specification: Brand: TOWNSEND Model: 9000 Type: Skinner Dimensions: 1350 x 950 x 2100 ( mm ) Power supply: 400V 50Hz 3N Power: 1.5kw Belt width: 500 mm Knife width: 510 Capacity: 1300 - 1800 pcs/h

BREADING MACHINE MAREL TOWNSEND FURTHER PROCESSING B.V., MODEL: TRM 630 Technical description: Marel Townsend Further Processing B.V. rolling machine. Model TRM 630 Type 472640 Serial number 10096047 Plastic belt, belt width: (2x) 630mm Total dimensions: 2050mm x 1300mm x 2100mm

Marel/Stork/Townsend twin spiral hot air/steam oven 600 mm belt Machine in lovely condition direct from major UK factory which stopped producing for fast food chain in 2016.

all stainless steel electrically heated 386 kW frying length 8.000 mm belt width 630 mm adjustable speed oil circulation pump suitable for fire protection sediment removal system electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

MEMBRANE SKINNERTOWNSEND, MODEL: 1520 Technical description: Serial number: 140 Year: 1998 Working width: 380 mm Power supply: 220-240 V/50-60 Hz Dimensions: 700 x 530 x 990 mm

Used-refurbished 510 mm cutting width 1300-3200 kg/hour capacity external dimensions: 2200x900x1400mm

Height=0.98 m, Overall length= 0.8 m, Overall width= 0.91 m, Net weight= 350 kg,

Height=1.4 m, Overall length= 0.7 m, Overall width= 2.15 m, Net weight= 365 kg,

Teflon infeed, hold down belt, sediment removal, electric hoists, circulation pump, oil level indicator, CIP, Belt width: 630 mm, Frying length: 4000 mm, Heating: thermal oil, 232kW, Oil capacity: +/- 1100 litres, 20 mm above belt, Compressed air: 6 - 8 Bar, 0.5 Nm³/h, Power: 3 x 400V, 50Hz, 10.5kW, Dimensions: 6850 x 2100 x 2800 mm, Weight: 4200 kg

Calibre: 13 - 38 mm, Pipe set: Calibre 38 & 25, Steam: 140 - 260 kg/h, @2 Bar, Compressed air: 5 - 7 Bar, Power: 3 x 380V, 50Hz, 3.7kW, Dimensions: 1900 x 700 x 1500 mm, Weight: 550 kg

CONVEX® Combi-Tower - by UBERT - Made in Germany Two-in-One - The Advantages Combined arrangement for the smallest footprint. This also avoids long distances between sales rooms. Convex double glass doors for perfect product presentation, minimal heat loss and extremely low touch temperatures Intuitive user guidance thanks to plain text display Software update via USB interface Shorter cooking times of less than an hour for grilled chickens with a gross weight of 1kg each Programmable climate control in the cooking chamber for a perfect grilling result The new CONVEX® rotisserie Equipped with 3 heating systems in one device: Infrared for optimal tanning Convection for fast and even cooking Steam for juicier products CONVEX® dampers For the operating modes steam, combination, hot air, regeneration 8 levels (longitudinal insertion) for 1/1 GN ...

Year of construction 2013 Drying tower Ambaflex Belt width 40 cm Conveying length 20 m Inlet height approx. 50 cm Spout height approx. 120 cm Orientation 90° left Speed up to 13 m/min Delivery date: immediately Price on request. Worldwide Delivery & Installation

VENANZETTI COOLING TOWER, for granule. This system allows to cool the granule after extrusion with little space taken, READ CONSTRUCTORS DESCRIPTION :, Spiral elevators, The spiral elevator is the perfect solution for moving a product upwards while simultaneously treating it thermally in very small spaces., The conveyor surface is a rising helicoidal trough, or rather a spiral with a constant pitch. The width of the trough is determined by the difference between the helicoid’s external and internal diameter. The product moves upwards on the conveyor by means of an oscillating thrust movement with controlled frequency and amplitude, and the direction is inclined in order to throw the product upwards., The advantages of this solution are:, -, very small layout space;, - thermal treatments while the product is on the conveyor (heating, cooling, drying, curing, etc.);, - speed on the conve ...

approx. 30 pieces of tensioning towers, approx. 3 pieces made of aluminium, the rest is made of steel, base plate approx. 630 mm x 630 mm x 65 mm, towers approx. l x w 360mm x 360mm, height with the base plate of 660 - 1025 mm, as can be seen in the pictures, the towers are partly still blanks and partly equipped with elements from Lang. The towers are also handed in individually.

tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...

Electric towing vehicle, tow tractor for tugger train SILENT tow tractor STILL type R063-wheel tow tractor, electric tractorFabr. No. W4X126A00120 year of construction 2010Towing load: max. 6000 kgPayload 150 kgAxle load front: 420 kgAxle load rear: 600 kgDrive power: 3.2 kW /60 min. Battery voltage: 24 volts- 3-wheel tractor- without towbar, carrier plate with 14 mm holes, hole spacing 65 /75 x 120 mm- lighting device- 24 volt socket rear- battery from year of construction 2010, type 5 EPzS 625 (24 volt/ 625 Ah) - defective

8 pieces - Tugger train Tow tractor STILL - Electric tow tractor STILL Type CX TLogistic train Towing vehicles, tugger train for logistics trains Year of construction all around 2010 or laterBatteries from 2010 to 2017Plus a chargerScope of delivery for the offer price:8 pieces Electric tow tractor STILL type CX Each tractor has a battery installed.1 piece chargerAll devices workA battery is defective, so a device does not work. Technical data:Tensile load: max. 4000 kgNominal drive power: 3 kWBatteria voltage: 24

Generac Mobile Products VT1 Super Light professional light tower, year 2017, designed to provide powerful lighting on construction sites, road works, industrial areas, events or night-time interventions. This autonomous unit combines a generator set and an imposing telescopic mast of up to 9 meters, equipped with 4 powerful 1,000 W metal halide spotlights. An ideal solution to quickly illuminate a large work area without a fixed installation. ⚙️ KEY FEATURES: • Brand: Generac Mobile Products / Tower Light • Model: VT1 Super Light • Year: 2017 • Telescopic mast: 9 m • Lighting: 4 x 1,000 W • Metal halide projectors • Integrated generator set: 8 kVA • Voltage: 220/240 V • Frequency: 50 Hz • RPM: 1,500 rpm • Kubota engine • Meter: 1,813 hours • Weight: 1,115 kg • GVW: 1,300 kg • Trailer category: O2 The machine is mounted on a road trailer with drawba ...

RABAUD TOWED SWEEPER 1800 A – 2017 – WIDTH 1.80 M Beautiful Rabaud Tractée 1800 A professional sweeper, year 2017, made in France. Robust and versatile machine, designed for the efficient cleaning of roads, courtyards, car parks, industrial sites, farms, warehouses and large outdoor areas. ⭐ HIGHLIGHTS: • Year: 2017 • Brand: Rabaud • Model: 1800 A towed • Working width: approx. 1,800 mm • Indicated weight: 600 kg • Mechanical PTO drive • Large cylindrical brush • Adjustable drawbar • Transport wheels • Robust protective guard • Professional construction • Made in France • 25 km/h signalling • Serial Number: S9471 This Rabaud sweeper is in very good general visual condition, with a structure, a drawbar and mechanical elements that are particularly clean in view of its use. Its large brush allows you to quickly cover a large area. Its towed syst ...

Electric tow tractor Manufacturer: MOVEXX Type: T 1000 The electric tow tractor can be used in numerous areas. Think about internal and external logistics; however, the machine can also be used to move containers in waste management. The TT1000-T can also move a variety of different types of trolleys, such as roll containers, industrial trolleys and aforementioned waste bins. Technical data pulling aid: 300W / 800 N Weight without battery: 40 kg Year of construction 2020 including battery charging station Maximum weight to pull: 1,000 kg Battery specifications: Lithium battery: LITHIUM LIFePO4 24V / 36 Ah / 922 Wh Year of Make: 2020 Weight: 11.9 kg Condition & accessories, see original pictures! If you have any questions, email or call.

Tow tractor for logistics train towing vehicles, tugger train for logistics trainsElectric tow tractor, electric tractor STILL type CX TZuglast: max. 4000 kgNominal drive power: 3 kWBatterie voltage: 24 volt hydraulic quick coupling (single-circuit hydraulic system, was used for lifting trailers)- towing bracket - plus an automatic battery charger - battery in poor conditionEmpty weight: 740 kgBattery weight: 382 kgTotal weight: 1120 kg3 pieces available:Tractor 1 = Year of construction 2011Tractor 2 = Year of manufacture: 2010Tractor: 3 =

Signal towers, signal lights, signal lamps, indicator lights, signal light columns, light signal alarm systems -Manufacturer: Siemens, Signal tower 3 colors -Type: 8WD4 -Number: 1x signal tower available -Dimensions: Ø 70 x 320 mm -Weight: 0.3 kg

Signal towers, signal lights, signal lamps, indicator lights, signal light columns, light signal alarm systems -Manufacturer: Werma, 3-stage signal tower -Type: Type 12 -Item No.: 640 810 00 -Voltage: 24 V -Number: 1x signal tower available -Dimensions: Ø 70 x 365 mm -Weight: 0.4 kg

Signal towers, signal lights, signal lamp, indicator light, signal light column, light signal alarm system, flashing light -Manufacturer: Pfannenberg, signal tower flashing light -Type: PMF 2015-SIL -P/N: 21007804601 -Voltage: 24 V -Number: 1x signal tower available -Dimensions: Ø 177 x 190 mm -Weight: 0.8 kg

COOLING TOWER, TRUWATER, TCS250C1B FRP square cooling tower , Dimensions of 2,500 mm x 2,500 mm x 4,250 weight of approximately 2,080 kg Commercial: Mainie Harun (mainie@topglove.com.my) Noor Syaida (noor_syaida@topglove.com.my) Technical: Muhd Syahir (mhd_syahir@topglove.com.my) Nik Faris (nik_faris@topglove.com.my) Incoterm: EX WORK Currency: USD

Practical Peugeot Partner 1.9 diesel light truck from 10/04/2002 with 175,598 km. The car starts smoothly, drives and shifts well and is equipped with a tow bar and closed cargo space. Due to its compact dimensions, simple technology and practical loading space, the Partner is particularly suitable as an affordable work or handyman for agriculture, maintenance, independent or private use. Main characteristics: 1.9 diesel, Initial registration: 10/04/2002, Mileage: 175.598 km, Manual transmission, Starts, drives and shifts well, Light truck, 2 seats, Closed cargo compartment, Side sliding door, Double rear doors, Tow bar GVW: 1,762 kg - Tare: 1,180 kg - Payload: 507 kg - Belgian registration documents Part I & II available - Technical inspection: The technical inspection has currently expired. At the last technical inspection, the mileage was around 171,000 km. Since then, the car has on ...

Built in 1997 Length conveyor belt approx. 55 m Equipment o drying tower upward o infeed left at the bottom o outfeed 270° at the top ; working condition

Radio tower 30 mtr. Against bid!

ATMOS PDS PDP 35 towable air compressor was built by ATMOS Chrást s.r.o. in the Czech Republic in 2021. The machine is used wherever top-quality compressed air is required. Its components from renowned European brands ensure the highest possible energy efficiency throughout its entire service life. The compact design based on a single-axle trailer, in turn, allows operation in all conditions, both at low and high temperatures. The ATMOS PDP 35 diesel air compressor weighs 768 kg. The machine has only been used for 350 hours and is in very good condition. At 250 operating hours a service was performed. Technical specifications of the ATMOS PDS PDP 35 rotary screw compressor - motor power: 35.7 kW - working pressure: 7 bar - maximum capacity: 5 m3/min - power source: combustion engine - operating hours: 350 h - weight of the ATMOS machine: 768 kg

Towing capacity: 6000kg, platform load capacity: 150kg, rated tractive force: 1200N, max. tractive force: 6500N, travel speed with/without load: 20km/h/12km/h, axle load front/rear: 550kg/860kg, wheelbase: 1190mm, track width: 860mm, turning radius: 1650mm, machine dimensions X/Y/Z: approx. 1850mm/1000mm/2100mm, weight: approx. 1800kg. Including 4 trailers. Documentation available. An on-site inspection is possible.

Signal towers, signal lights, signal lamp, signal tower, control lamp -Manufacturer: Telemecanique -XVB C21/ XVB C2B6 -Number: 4 pieces available -Price: per piece -Dimensions: 80 x 300 mm -Weight: 0.9 kg

Signal towers, signal lights, signal lamp, control lamp -Manufacturer: Rittal, signal light SZ 2368.000 -Price: per piece -Number: 2 pieces -Dimension: Ø 70 x 365 mm -Weight: 0.4 kg/piece

Signal towers, signal lights, signal lamp, indicator light -Manufacturer: Patlite -Type: LU7-02 08X27P -Dimensions: 70 x 650 mm -Weight: 1.2 kg

Signal towers, signal lights, signal lamps, indicator lights, signal light columns, light signal alarm systems -Manufacturer: Siemens, Signal tower 2 colors -Type: 8WD4 -Voltage: 24 V -Number: 2x signal towers available -Price: per piece -Dimensions: Ø 70 x 265 mm -Weight: 0.2 kg/pc.

Tow rope Auction-ID: A1-40898-218

2x CWS soap dispenser and 2x CWS paper towel dispenser. The contents of this lot come from a dissolved gastroenterological practice in Switzerland and have already been professionally removed and transported to a warehouse in Germany. The sale is EXW / ex warehouse Germany. Packaging, loading, transport and, if necessary, export processing are the responsibility of the buyer. The collection must take place within the specified time period. In the event of late or non-collection, additional costs may arise for storage, handling, dismantling or re-provisioning. These must be paid by the buyer before collection. For data protection reasons, individual areas, advertisements, labels or documents may have been made unrecognizable in the images. Medical devices are offered second-hand. The buyer is responsible for having all technical, hygienic, regulatory and safety-relevant tests requir ...

Manual meadow tow, with locking mechanism Auction-ID: A3-46134-17336

- Cleaning and screening facility designed for the treatment of sawdust with separation of metals, plastics and aggregates. - Capacity approx. 750 kg/h. - Includes: • Elevator belt at the entrance to the tower. • PAL vibrating screen for initial particle size separation of sawdust. • PAL densimetric separator that performs density separation between woody material and light contaminants (plastics, papers, films, foams, etc.). • PAL RC 600.2 refiner: engine power 45 kW. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-5

- Cleaning facility designed for the treatment of recycled wood mixed with impurities and converting it into clean fractions with separation of metals, plastics and aggregates. - Capacity 20000 kg/h. - Includes: • Feeding area with hydraulic pushers that advance the material continuously towards a lifting belt at the entrance to the tower, avoiding blockages and regulating the inflow flow. • Preliminary separator for the removal of fine aggregates and dust. • Ferric metal removal units using electromagnets. • Eddy current separators of non-ferrous metals. • Densimetric separators for separating plastics, papers, foams, etc. • High capacity vibrating screen PAL DCC 150 MC for the expulsion of heavy particles (sand, stones, glass, etc.). • Bag filter for extraction and filtration of fine dust. • The conveyor belts marked with a red X in pho ...

Towing vehicle for KLT tugger trains Delivery without tractor drawbar and charger Battery 24 V 3 PzS 465 / Year of construction unknown   Charging cycles and capacity of the battery are not known Dimensions: 1250x800x2100 mm Weight: 1150 kg Year of construction: 2006 SerNr.: 91529393 Operating hours: 23,908 h Auction-ID: A7-49816-241

Item: Siemens Signal Towers / Signal Tower Lights Manufacturer / Series: Siemens, Series 8WD4 Types (recognizable): 8WD4 420-5AD – yellow, 24V AC/DC 8WD4 420-5AF – blue, 24V AC/DC Design: Completely mounted on aluminum tube with mounting flange Industrial version, IP65 For optical signaling on machines and systems Quantity: 6 pieces Condition: used, untested, with normal signs of use Scope of delivery: 6x signal towers as shown Auction-ID: A7-49816-80

Towing vehicle for KLT tugger trains Delivery without tractor drawbar and charger Battery 24 V 3 PzS 465 / Year of construction 2018   Charging cycles and capacity of the battery are not known Dimensions: 1250x800x2100 mm Weight: 1150 kg Year of construction: 2007 SerNr.: 91529331 Operating hours: 30,990 h Auction-ID: A7-49816-240

Towing vehicle for KLT tugger trains Delivery without tractor drawbar and charger Battery 3 EPzS 420 / Year of construction 2006   Charging cycles and capacity of the battery are not known Dimensions: 1250x800x2100 mm Weight: 1150 kg Year of construction: 2006 SerNo.: 91521394 Operating hours: 26,516 h Auction-ID: A7-49816-242

Mercedes-Benz Sprinter 214 CDI panel van, year of manufacture 2018. Equipped with a 2,143 cc 4-cylinder diesel engine with an output of 105 kW (approx. 143 hp), 6-speed manual gearbox and rear-wheel drive. Odometer reading: 163,236 km. Equipped with 3 seats, high roof, Webasto parking heater with digital control, air conditioning, radio/multimedia system with telephone function, electric windows, central locking, sliding door on the right, double rear doors and tow bar. Own weight 2,220 kg, GVW 2,800 kg and payload according to identification report 505 kg. Maximum braked towing weight 2,000 kg. Belgian registration papers and European certificate of conformity available. Inspection valid until 19/02/2027. Auction-ID: A3-46124-22050

Manufacturer: PROMECH Model: FW80 Device Type: Fifth Wheel Wrecker Attachment Professional towing and recovery attachment for tractor units Year of construction according to nameplate: 04/2026 Serial number: XKCTC260476 Maximum lifting capacity: 70 kN Stroke Distance: 37 inches Battery: 12V/80Ah Trailer Tow Pin: 2 inches (50mm) Towbar: 2-5/16 inches Towing capacity hitch: 12,000 lb Four bullhorn hooks Lighting system with 10 lights CE marked Sturdy steel construction Industrial design Color: Gray Electric lighting included Hydraulic lifting mechanism Suitable for towing and recovery operations Designed for commercial vehicles and tractor units Visually as good as new condition Little or no visible signs of wear Sold in existing condition Nameplate available and easy to read Ideal for towing companies, recovery services, commercial vehicle ...

Manufacturer: PROMECH Model: FW80 Device Type: Fifth Wheel Wrecker Attachment Professional towing and recovery attachment for tractor units Year of construction according to nameplate: 04/2026 Serial number: XKCTC260476 Maximum lifting capacity: 70 kN Stroke Distance: 37 inches Battery: 12V/80Ah Trailer Tow Pin: 2 inches (50mm) Towbar: 2-5/16 inches Towing capacity hitch: 12,000 lb Four bullhorn hooks Lighting system with 10 lights CE marked Sturdy steel construction Industrial design Color: Gray Electric lighting included Hydraulic lifting mechanism Suitable for towing and recovery operations Designed for commercial vehicles and tractor units Visually as good as new condition Little or no visible signs of wear Sold in existing condition Nameplate available and easy to read Ideal for towing companies, recovery services, commercial vehicle ...

Dimensions approx. 1400 × 1400 × 2800 mm, one tower Auction-ID: A7-50524-925

Dimensions approx. 1400 × 1400 × 2800 mm, one tower Auction-ID: A7-50524-924

Olympus Evis Exera II CV-180 , CLV-180 & Pigtail MAJ-1430 CA052025 & keyboard incl. endoscopy tower. Used endoscopy system from the clinical environment. Sold in existing condition according to pictures. Olympus CV-180 video processor, Olympus CLV-180 xenon light source, Olympus pigtail MAJ-1430, cable/connector CA052025, matching keyboard. The contents of this lot come from a dissolved gastroenterological practice in Switzerland and have already been professionally removed and transported to a warehouse in Germany. The sale is EXW / ex warehouse Germany. Packaging, loading, transport and, if necessary, export processing are the responsibility of the buyer. The collection must take place within the specified time period. In the event of late or non-collection, additional costs may arise for storage, handling, dismantling or re-provisioning. These must be paid by the buyer before coll ...

Olympus Endoscopy Tower Exera CV-160 (2x), CLV-160, Pigtail, Keyboard. Used endoscopy system from the clinical environment. Sold in existing condition according to illustrations. Olympus CV-160 video processor (2x), Olympus CLV-160 xenon light source, pigtail, matching keyboard. The contents of this lot come from a dissolved gastroenterological practice in Switzerland and have already been professionally removed and transported to a warehouse in Germany. The sale is EXW / ex warehouse Germany. Packaging, loading, transport and, if necessary, export processing are the responsibility of the buyer. The collection must take place within the specified time period. In the event of late or non-collection, additional costs may arise for storage, handling, dismantling or re-provisioning. These must be paid by the buyer before collection. For data protection reasons, individual areas, advert ...