129,384 used machines on RESALE, but how to find them? Machine Search
Chassis number: W09212200FEL65037, Equipped with engine power: ±100 kW (≈136 hp), Engine: Deutz-type diesel, Max. torque: ±570 Nm, Transmission: powershift, 3 forward / 3 reverse, Top speed: 40 km/h, Climbing ability: ±60%, Winch speed: ±100 m/min, Lifting force winch: ±27 kN, Swivel speed: ±2.5 rpm Outrigger base: ±5.6 x 5.6 m., hour reading not readable, Please note! Crane does not run. Electronic malfunction. Auction-ID: A1-40132-81
tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...
Built in 1997 Length conveyor belt approx. 55 m Equipment o drying tower upward o infeed left at the bottom o outfeed 270° at the top ; working condition
Signal towers, signal lights, signal lamp, control lamp -Manufacturer: Rittal, signal light SZ 2368.000 -Price: per piece -Number: 2 pieces -Dimension: Ø 70 x 365 mm -Weight: 0.4 kg/piece
Year of constr.: 2019 Dimensions: L 4400 mm x W 3500 mm x H 5000 m Ploughshare mixers: Type: PPP 2000 / 3 Manufacturer: MINOX Volume: 2000 Lt. Material: Stainless steel 3 x cutter heads Main drive: 37 KW;
Collator 20 stations, format: A/3, Stiching Unit SPF-10II Sticher & Folder, Fronttrimmer FC-10II Trimmer, M-No.64025, 40.000 Exp./hr.
Signal pillars, signal lights, signal lamp, control lamp -Manufacturer: Patlite -Type: LU7-02 -Dimensions: 70 x 340 mm -Weight: 0.7 kg
Signal towers, signal lights, signal lamp, signal tower, control lamp -Manufacturer: Telemecanique -XVB C21/ XVB C2B6 -Number: 4 pieces available -Price: per piece -Dimensions: 80 x 300 mm -Weight: 0.9 kg
Signal towers, signal lights, signal lamp, indicator light -Manufacturer: Patlite -Type: LU7-02 08X27P -Dimensions: 70 x 650 mm -Weight: 1.2 kg
Signal pillars, signal lights, signal lamp, control lamp -Manufacturer: Patlite -Type: LU7-02FB -Number: 3x columns available -Price: per piece -Dimensions: 70 x 190 mm -Weight: 0.3 kg
Used spiral conveyor belt with downward direction LIPSIA -In bakery condition- - Spiral conveyor belt - Collection table - Crimp barrel catch plate The plant is out of service. Viewing and test run are possible by arrangement.
Inv. Num. : 7719 Type: VK-500G Producer: PSG Plus Created: 2020 Parameters: Internal dimensions of the machine (LxWxH): 400 x 200 mm
1 Karlsruhe cooling tower system with 2 fans Type: KD 2/12 - 34-3 Fabr. No. 7522, power 2,232 KV with complete frame with complete rust removal Shut down End3e 2023, completely on site on the production roof,
Ref.Nr. 00791 Name of the system Blechturm Flat goods storage Manufacturer: Heitling GmbH & Co. Profil systems today Model HEI – TECHMAT - II Built in 1999 Payload/tray 34 kN Number of compartments 59 Storage capacity 2006 kN Sheet format 2000x4000mm Stacking height 55/70 Width: approx. 7,500 mm Depth: 5,000 mm tower + 5,500 mm with extended cassette Height: approx. 7,500 mm Deadline by arrangement - immediately Condition To be viewed under power Currently used next to a laser cutting system
Signal towers, signal lights, signal lamps, indicator lights, signal light columns, light signal alarm systems -Manufacturer: Siemens, Signal tower 2 colors -Type: 8WD4 -Voltage: 24 V -Number: 2x signal towers available -Price: per piece -Dimensions: Ø 70 x 265 mm -Weight: 0.2 kg/pc.
Signal towers, signal lights, signal lamps, indicator lights, signal light columns, light signal alarm systems -Manufacturer: Siemens, Signal tower 3 colors -Type: 8WD4 -Number: 1x signal tower available -Dimensions: Ø 70 x 320 mm -Weight: 0.3 kg
Signal towers, signal lights, signal lamps, indicator lights, signal light columns, light signal alarm systems -Manufacturer: Werma, 3-stage signal tower -Type: Type 12 -Item No.: 640 810 00 -Voltage: 24 V -Number: 1x signal tower available -Dimensions: Ø 70 x 365 mm -Weight: 0.4 kg
Cooling capacity: 850kW, motor power: 2.7kW/15.5kW, motor type: M 3AA 160L, speed: 735rpm/1460rpm, water temperature outlet: 48°C, ambient air temperature: 40°C, material: stainless steel, weight: approx. 3000kg. Documentation available. On-site inspection is possible.
An Evapco cooling tower is available. Fan power: 11kW, Fan type: axial, Fan diameter: 84 inches, Fan material: aluminium, Fan shaft: heavy-duty design, Drive system: Powerband belt drive with Taper-Lock pulley, Maintenance access: galvanized steel doors, Water treatment: integrated droplet separator, Motor hours: 12471h. Documentation available. On-site inspection is possible.
2 clamping cuboids with clamping surface 300mm x 410mm, grid spacing horizontal 120mm, vertical 50mm, clamping
Clamping area 350mm x 620mm Grid spacing 50mm Base plate 630mm x 630mm Span: 350mm x 350mm
2 tension blocks: Base plate: 370mmx370mm Grid spacing 40mm Clamping surface 300mmx450mm Clamping width 300mmx300mm M12 Thread 2 tension blocks: Base plate 280mmx280mm Grid spacing 40mm Clamping surface 220mmx450mm Clamping width 220mmx220mm M12 Thread 1 grid plate: 360mmx360mm Grid spacing 40mm Base dimension 460mmx460mm M12 Thread
Cooling coil in good condition Dismantling by specialist varnish Availability: immediately Disassembly: included Loading: included Serial No.: 841151 Price: 215.000,00 Vb Spiral height: 5845 mm Inner diameter: approx. 850 mm Outer diameter: approx. 1050 mm Max. product height: approx. 120 mm Belt width: approx. 870 mm Number of spirals: 2 Belt length per spiral: approx. 600 mtr
Horizon Vac 100 a+c, Year 2005 10 Station Vac 100a 10 Station Vac 100c 1 x PJ-77R Jogger 1 x Stitch & Folder SPF-20A 1 x Fore-Edge Trimmer FC-20A Etc. Available: immediately
- Cleaning and screening facility designed for the treatment of sawdust with separation of metals, plastics and aggregates. - Capacity approx. 750 kg/h. - Includes: • Elevator belt at the entrance to the tower. • PAL vibrating screen for initial particle size separation of sawdust. • PAL densimetric separator that performs density separation between woody material and light contaminants (plastics, papers, films, foams, etc.). • PAL RC 600.2 refiner: engine power 45 kW. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-5
- Cleaning facility designed for the treatment of recycled wood mixed with impurities and converting it into clean fractions with separation of metals, plastics and aggregates. - Capacity 20000 kg/h. - Includes: • Feeding area with hydraulic pushers that advance the material continuously towards a lifting belt at the entrance to the tower, avoiding blockages and regulating the inflow flow. • Preliminary separator for the removal of fine aggregates and dust. • Ferric metal removal units using electromagnets. • Eddy current separators of non-ferrous metals. • Densimetric separators for separating plastics, papers, foams, etc. • High capacity vibrating screen PAL DCC 150 MC for the expulsion of heavy particles (sand, stones, glass, etc.). • Bag filter for extraction and filtration of fine dust. • The conveyor belts marked with a red X in pho ...
2 tension blocks: Base plate: 370mmx370mm Grid spacing 40mm Clamping surface 300mmx450mm Clamping width 300mmx300mm M12 Thread 2 tension blocks: Base plate 280mmx280mm Grid spacing 40mm Clamping surface 220mmx450mm Clamping width 220mmx220mm M12 Thread 1 grid plate: 360mmx360mm Grid spacing 40mm Base dimension 460mmx460mm M12 Thread Auction-ID: A1-44728-47
Clamping area 350mm x 620mm Grid spacing 50mm Base plate 630mm x 630mm Span: 350mm x 350mm Auction-ID: A1-44728-44
2 clamping cuboids with clamping surface 300mm x 410mm, grid spacing horizontal 120mm, vertical 50mm, clamping Auction-ID: A1-44728-48
PC Midi Tower Intel Core i3-8100 3.6 GHz 8 GB RAM, 2 monitors ASUS VA249 and curved monitor SAMSUNG C34G55TW/P, monitor mount for 3 monitors
PC Midi Tower Inscription 27, 2 Monitors ASUS VS247, w. 2-Way Monitor Mount
PC Midi Tower HYPERION Intel Core i3-7100 3.9 GHz, 4 GB RAM, Monitor BENQ GL2460, Monitor ASUS 24, plus document shredder HSM 102.2
PC Midi Tower black Intel Core i3-8100 3.6 GHz 16 GB RAM, 2 monitors ASUS
PC Midi Tower DELL Vostro 8FNWNV1 Core i5, ESC 18361406413, Monitor ASUS VP247 w. foot
PC Midi Tower DELL Vostro BDNWNV1 Core i5, ESC 24770821069, Monitor ASUS VS247
Signal towers, signal lights, signal lamp, indicator light, signal light column, light signal alarm system, flashing light -Manufacturer: Pfannenberg, signal tower flashing light -Type: PMF 2015-SIL -P/N: 21007804601 -Voltage: 24 V -Number: 1x signal tower available -Dimensions: Ø 177 x 190 mm -Weight: 0.8 kg
Altrex RS tower 4, 4 platforms, 4 wheels, 9 RS tower mounting frames, 4x stabilizer bar, 8x Safe Quick 2 RS tower 5. 10 meters working height total. Auction-ID: A1-42011-182
Truss tower triangular made of three-point crossbeam, leg dimension approx. 4.5m, approx. 5m high, floor connector
PC Midi Tower HP Compaq 8100 Elite Core i5-8100, S/N CZC110F70L, without software, 2 monitors BENQ GL2780-8, monitor arm for 2 monitors
Datasheet — CNC Lathe Max rotating diameter 700 mm Max carriage length 800 mm Max trolley diameter 410 mm 70 mm bar passage Spindle 5000 rpm · 25–34 kW · 280–380 Nm · Ø 315 mm X-axis stroke 300 mm Z-axis stroke 800 mm 12-position motorized turret · 4000 rpm · 11,3 kW HEIDENHAIN CNC Tool: VDI Auction-ID: A1-44765-4
not working, batteries in low condition Auction-ID: A7-45252-14
Working parameters: Max. turning diameter 325 mm Max. turning length 400 mm Spindle speed 30 – 4,500 rpm X-axis strokes 215 mm / Z-axis 420 mm Equipment included: 12-station turret VDI 40 Hydraulic chuck 3 jaws Ø 204 mm Tailstock CM4 Tool holder with motorized tools Coolant Bar loader Year & Manufacturer: Year 2000 Manufacturer HYUNDAI Auction-ID: A1-44765-266
Included: Case Auction-ID: A1-45495-278
Included: Case without instruction manual Auction-ID: A1-45495-277
Included: 2 x cases and accessories Auction-ID: A1-45495-279
maximum number of results exceeded
please refine your search
2.500 € 
