total station used for sale

ITEC hygiene station, type: 23883, series: 0389, year of construction: 2008, 400 V, 3 Ph, 50 Hz, 0.8 kW, length brush: (2x) 500 mm, total dimensions: 1700 mm x 950 mm x 1900 mm.

- 1 VA tank (approx. 1500 ltr.), double-walled - 2 VA tanks (basement) - 1 osmosis system (for the production of chemicals) 3 tanks 1 water system (water tank) 1 Cooling 1 mixer 1 batch of various pumps 1 compressor

Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with discharge conveyor, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRS -Roller conveyor drive motor: 0.18 kW 88 rpm -Drive motor conveyor belt: 0.37 kW 71 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roller spacing: 250 mm Rollers: rubberized -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 500 mm -Transport dimensions: 1700/1500/H700 mm -Weight: 397 kg

Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with discharge conveyor, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRSZP -Drive motor: 0.18 kW 88 rpm -Intermediate dimension: 1480 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roller spacing: 250 mm -Rollers: rubberized -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 500 mm -Number: 2x Transfer station conveyor available -Price per piece -Transport dimensions: 1750/1570/H2020 mm -Weight: 496 kg/pc.

Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with discharge conveyor, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRSZP -Drive motor: 0.18 kW 88 rpm -Intermediate dimension: 1480 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roller spacing: 250 mm -Rollers: rubberized -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 500 mm -Transport dimensions: 1780/1420/H2180 mm -Weight: 508 kg

Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with discharge conveyor, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRS -Roller conveyor drive motor: 0.18 kW 88 rpm -Drive motor conveyor belt: 0.37 kW 71 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roller spacing: 250 mm Rollers: rubberized -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 500 mm -Transport dimensions: 1700/1440/H690 mm -Weight: 348 kg

Description: The almost new 8 MW transmission test station is operated from a central control station. Some of the test energy input can be fed back into the power network. Inventory number: 9000945 , Year of construction: 2018 Data on the three-phase asynchronous machines Nominal output: 7.7MW Maximum output: 8.47MW Nominal speed: 1150/min Maximum speed: 2200/min Nominal torque: 63940 Nm Maximum torque: 70330 Nm Main shaft data Nominal speed: 8.99 rpm Nominal torque: 6000kNm Maximum torque: 8800kNm Cooling system Cooling capacity of the cooling tower: 900kW Coolant volume flow: 160m³/h at 4 bar and 30°C Nominal pressure hydraulics Hydraulic system main shaft: 250 bar at 100 l/min Hydraulic system quick coupling: 300 bar at 1 l/min Hydraulic system generator (lifting/lowering) 150 bar at 8 l/min Oil system: 8 bar at 120 l/min General data Operati ...

Description: serial number: 1037 control: SIEMENS Coros OP35  , without conveyor/transportation system  , please also have a look at the PDF documents of this machine Approx. Onsite Dimension. (l x w x h): 3,500 x 3,000 x 2,500 mm, weight approx.: 15,000 kg

Description: serial number: 1036 control: SIEMENS Simatic OP37  , without conveyor/loading system  , please also have a look at the PDF documents of this machine Approx. Onsite Dimension. (l x w x h): 4,000 x 4,000 x 3,800 mm, weight approx.: 15,000 kg

Seeding Station Lippelt Moli 580 Working width: 580 mm One-sided seed application 1x seeding container with brush 1x seeding container with fine and coarse spreading roller Humidification via water bath Pressure roller for attaching the seeds to the dough pieces Wire belts, removable Movable underframe for seed collection container Control with start/stop button, 2x potentiometer for belt speed and the seeding rate and emergency stop button

propulsion: 0,75 kw motor wihtout brake 1380 r/min description: with pusher and modular belt availability: immediatelly Installation dimension: 1405 x 1120 x 200 mm Usable width: 500 mm transport size: 1550 x 1200 x 1300 mm weight (m) [kg]: ca. 250 kg Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-si ...

propulsion: SEW motors description: We are offering a complete empty pallet checking station incl. a GOOD pallet magazina and a BAD pallet magazine, incl. chain- and roller conveyors as well as incl. a protecting fence The placement can be adapted individually. Pallet inspector, pallet inspection machine. We do also have more conveyors on stock which we could offer you. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or  ...

Ironing uniting machine System Dr. Datz Used Power up to 11000 Fl/h Direction of rotation: right - left Furnished for 0.33 l and 0.5 liter bottle

Used SHREDDIES production line Manufacturer: CPM WOLVERINE PROCTOR Ltd. Model: 5-station SHREDDIES production line Year: 2016 Description: A five-line production line for multilayer flakes from crushed grains. Finished product capacity: 700 kg / h Line speed: 54m / min. Finished product density: 200> 220 g / l Overall dimensions and setting of the machine: length x width x height: approx. 10929 x 1600 x 4685 Design diameter of the grinding roller: 203 mm Design working width of the chopping roller: 210 mm Rotational speed of the grooved roll: 20-85 m / min. Design number of positions: five (four working, one spare) Design width of cutting station conveyor: 230 mm Nominal design width of the edge trim: 12 mm per edge, total 24 mm Design product size: approx. 25 x 25 mm Technical data: Dimensions (length X width X height): Power supply: 400 V, 3 phases, 50 Hz Control v ...

with FESTO rotary table 360 mm numbers of drilling units: 29433, 29616. 29617, 29797 and 29798

Big Bag filling station, filling and weighing system used The system consists of the following components: 1 filling hopper approx. 2300 height 2500 mm 2 stainless steel trough screws 1 tumbling/shaking sieve approx. 1200 height 1900 mm 1 BigBag filling station approx. 1950 x 2400 x 3700 mm 1 control cabinet The Big Pack filling is filled by wheel loader or forklift via a pouring funnel. The filling material is transported via a conveyor screw to a tumbling sieve. From there, transported with another screw to the actual weighing and filling station. The big bags lie on a vibrating floor when filling and are thus compacted.

Mobile marking station Marking of metal parts - was used in Faurecia Machine checked - fine, ready for use

Used 3-station turbine packing machine. Dose range 5-50 kg, has a pickup conveyor and a bag-forming conveyor. YOM 90's.

STANDARD-EQUIPPED

STANDARD-EQUIPPED

Automatic rotative machine for the moulding of car filters, air-oil, panel or circular, with polyurethane seal Manufacturer: GUSBI S.P.A. Model: 24 stations Country of manufacture: Italy The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos. Specyfications: Available at 24 stations Turntable complete with 24 mould-holders Casting trolley with 2-axes Feeding machine for Polyurethane material Electronic control board to manage the functions of the machine Hourly output: from 200 to 350 pieces, according to the model of the machine, the utilized P.U. material and the mould -- Automatic rotary machine for forming car filters, air-oil filters, plate or round filters, with polyurethane seal Manufacturer: GUSBI S.P.A. Model: 24 stations Country of origin: Italy  ...

Wohlenberg Sprinter 7011 Gathering Machine 24 stations Equipment: -> Preparation for inline operation with perfect binder (e.g. Golf 6001, Champion 8000, Master 6501/7000, etc.) Drive for single and inline machines -> manual feeding station incl. control for automatic switching on and off -> additional blowing air in the transport duct -> Criss Cross Display -> ACC Automatic Caliper Control automatic sheet thickness control, self-learning, for > Faulty sheet inspection > Double-sheet inspection > plus/minus control -> electric disconnect clutch 12/13 station Factory specification format size: max. 460 x 320 mm min. 105 x 75 mm maximum product thickness 80 mm Built in 1998 and extended in 2006 incl. blowers and vacuum pumps NEW: Video part1/2 on youtube Price plus VAT EXW. All information is subject to change. Subject to prior sale. Dealer ...

length: 650 mm width: 720 mm height: 1850 mm weight: 255 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This YASKAWA MA2010 Welding Station Robot was manufactured in the year 2019 in Japan. It is equipped with a Lorch S8 RoboMig XT control unit and with a DX200 Master controller. The machine dispose of a Torch cleaner (BRG2000D) and 2 positioners (DK-2500-R1000) with Servo tracks (FB500).

Folding unit GUK FA 50-2 2nd station; good condition; cleaned and tested; Inlet width 500mm; 2 folded pockets; Self-control. Folding unit GUK FA 50-2 secound unit; good condition; cleaned and checked; working witdh 500mm; two pockets; Automatic control.

Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Yanmar Engine: 4 TNV 88 Engine No.: in production Power: 12.2 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: SOL1. L1 Gene. No.: P131635 Generator power: 15 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Mains/generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 100 Dimensions of the power unit: Width approx. mm: 750 Height approx. mm: 1.270 Length appro ...

Key data: 32 , 40 , 400

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Yanmar Engine: 4 TNV 98 TGGEH Engine No.: 189150 Power: 38.7 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S1L2. K1 Gene. No.: X22A025026 Generator power: 40 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Mains/generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 170 Dimensions of the power unit: Width approx. mm: 910 Height approx. mm: 1.350 ...

Drying Station, AGE 2009

Engel granulate chute model Anguss Schneidstation 3496-904-00-00-118, SN: 228921. Good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, shar ...

2017 Scanvaegt 8 station grader, 2 lines available from stock

Gebr. Carousel multi-station grinding machine

WITH COUNTING STATION M. No.: 3.65-00001 Wiring Diagram No.: 8.62-00001 Equipment / Additional information: Consists of: -Infeed conveyor -Machine -Counting station -Discharge belt

Grinding machine, angle grinder, rotary steel grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, double bench grinder -Manufacturer: Gebr. Bayer, tool grinding machine with 2 stations -Motor power: 0.75 kW -Speed: 2800 rpm -Grinding discs: Ø max. 225/160 mm -Coolant device: -Dimensions: 1210/710/H1340 mm -Weight: 195 kg

Grinding machine, angle grinder, lathe grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, tool grinder -Manufacturer: Bösch, tool grinding machine type L 15 -Grinding discs: Ø max. 150 x 32mm / framed Ø 125 mm see photos -Motor power: 0.55 kW -Speed: 2800 rpm -Coolant device: -Dimensions: 1110/480/H1310 mm -Weight: approx. 182 kg

Grinding machine, angle grinder, turning steel grinding machine, thread drill grinding machine, milling cutter grinding machine, surface grinding machine, drill grinding machine, bench grinder -Manufacturer: Wilhelm Simon, tool grinding machine with 2 stations -Motor power: 1 kW -Speed: 2800 rpm -Grinding disks: Ø max. 150 mm -Coolant system: pump is missing, can be replaced at an additional cost -Dimensions: 1430/780 / H1380 mm -Weight: 456 kg

Tool grinding machine, grinding machine, angle grinding machine, rotary steel grinding machine, steel grinding machine -Grinding places: 4 -Angle tables on swing tables: 3 -Angle table for chip breaker groove: 1 -Quantity: 1 piece available -Dimensions: 1210/1210/H1450 mm -Weight: 536kg

Tool grinding machine, grinding machine, angle grinder, turning steel grinding machine, steel grinding machine -Transfer in current condition as seen -Machine must: be overhauled electrically (FI circuit breaker trips) -Grinding points: 4 -Angled tables on vibrating tables: 3 -Vice for chip breaker groove: 1 -Max. Steel cross section: mm -Number: 1x grinding machines available -Price: per piece -Dimensions: 1500/1500/H1400 mm -Weight: 1004 kg

Front Cooking Regio – Station Rieber RST-11, 230 V, 96x72x139 cm Food dispenser, 230V, 3 kW, 16 A, up to 170°C, keep warm, regenerate, heated cover, light, thermal bridge, tray slide, tray rack with 8 x 1/1 GN inserts, adjustable sneeze guard glass, mobile, 2 locking wheels, original price 10782,00 €

General SKU392U1284 LocationBarneveld MakeSKAN TypeAFS 002 Year of construction1992 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4401 (316) Filtercheck Filter surface± 0,03 m² Information Floor space1,1x0,95 m Total height1,8 m Weight230 kg Extra Specificationsdata vessel: brand: De jong gorredijk B.V. vollume: 100 Ltr. material: 1.4401 pressure: 4bar max temp.: 50°C year: 1992. flow meters: Brand: Endress+hauser type: promag 53 pump: brand: socsil-inter sa Type: A1 24000 nr: 10156 year: 1994 motor: 0,75kW, 220/380Volt 583rpm Miscellaneous filtersBiotechnologyFine chemicalsSolventsSKANFilters > Miscellaneous filtersIndustries > Chemical > BiotechnologyIndustries > Chemical > Fine chemicalsIndustries > Chemical > SolventsBrand > SKAN What you can expect from Foeth: -- Machine is in working condition -- At a r ...

General SKU315T1102 LocationBarneveld MakeAzo No.825997 Year of construction2005 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Total height2,25 m Weight1000 kg CEcheck Floor space2,71x1,40 m Extra SpecificationsIBC lock, type EB12: with: screw conveyor, type DFS 100x1380 NE300, size: dia. 100 mm, lenght 1380 mm, Vibration motor, Stainless steel vessel, type D1104XD305 on frame, volume 600 Ltr Miscellaneous transportAZOConveying systems > Miscellaneous transportBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU315T1103 LocationBarneveld MakeAzo TypeG21-text No.045256B Year of construction2005 Main Features MaterialStainless steel Motor0.75 KW Inlet diameter300 mm Specified Features - Miscellaneous transport MaterialStainless steel Miscellaneous transport Capacity2x IBC Information Mounted in framecheck Total height2,71 m CEcheck Mounted on legscheck Floor space4,10x1,40 m ATEX compatiblecheck Extra Specificationsscrew conveyor.type DFS 100x1380 NE300size diameter 100 mm, length 1380 mm,outlet diameter: 125 mm0,75 kW, 230/400 Volt, (Ex) Vibration motor.0.4 kW, 400 Volt, (Ex) stainless steel drum in frame.type D1104XD305 on frame, volume 600 Ltr.connection in: 45 mm, 125mm (2x)connection out: 65 mmground surface: 1.7x1.6 mheight: 1.6 m Miscellaneous transportAZOConveying systems > Miscellaneous transportBrand > AZO What you can expect from Foeth: -- Machine is i ...

General SKU315T1104 LocationBarneveld MakeAzo TypeG21-text No.045256B Year of construction2005 Main Features MaterialStainless steel Motor0.75 KW Inlet diameter300 mm Specified Features - Miscellaneous transport MaterialStainless steel Miscellaneous transport Capacity2x IBC Information Mounted in framecheck Total height2,71 m CEcheck Mounted on legscheck Floorspace4,10x1,40 m ATEX compatiblecheck Extra Specificationsscrew conveyor.type DFS 140x1230 NE300size diameter 100 mm, length 1380 mm,outlet diameter: 125 mm1,1 kW, 230/400 Volt, (Ex) Vibration motor.0.4 kW, 400 Volt, (Ex) stainless steel drum in frame.type D1104XD305 on frame, volume 600 Ltr.connection in: 45 mm, 125mm (2x)connection out: 65 mm Miscellaneous transportAZOConveying systems > Miscellaneous transportBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced pric ...

General SKU315T1101 LocationBarneveld MakeAzo TypeDFS 100x1380 No.825989, Year of construction2005 Main Features MaterialStainless steel Motor0.75 KW Inlet diameter300 mm Specified Features - Miscellaneous transport MaterialStainless steel Miscellaneous transport Screw diameterø100 mm Screw length1380 mm With hoppercheck Outlet125 mm With motor0,75 kW 230/400 Volt (Ex) With DC motorcheck Screw speed88 rpm Information CEcheck Floorspace2,7x1,4 m Total height2,3 m ATEX compatiblecheck Extra Specificationswith vibration motor, stainless steel vessel: type D1104XD305 on frame, volume 600 ltr. Miscellaneous transportAZOConveying systems > Miscellaneous transportBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machi ...

General SKU204U043 LocationBarneveld MakeAZO TypeDFS 140x1630 NE250 Mach.No.446632 Main Features Motor1.1 KW Length1810 mm Inlet diameter300 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4404 Horizontal conveyor screwcheck Tube-typecheck Diameter135 mm Length1810 mm Shaft diameter30 mm Pitch135 mm Inletdia. 300 mm Outletdia. 193 mm Motor1,1 kW Screw speed109 rpm Information Year of construction2007 Mounted on framecheck Total height0,96 m Floorspace2,4x1,4 m Weight300 kgHorizontal screw conveyorsAZOConveying systems > Horizontal screw conveyorsBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines ...

General SKU204U048 LocationBarneveld MakeAZO TypeDFS 140x1630 NE250 Mach.No.446632 Main Features Motor1.1 KW Length1810 mm Inlet diameter300 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4404 (316L) Horizontal conveyor screwcheck Tube-typecheck Diameter135 mm Length1810 mm Shaft diameter30 mm Pitch135 mm Inletdia. 300 mm Outletdia. 193 mm Motor1,1 kW Screw speed107 rpm Information Year of construction2007 Mounted on framecheck Total height0,96 m Floorspace2,4x1,4 m Weight300 kgHorizontal screw conveyorsAZOConveying systems > Horizontal screw conveyorsBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more m ...

Description: Technical details: length 650 mm, width 720 mm, height 1850 mm, weight 255 kg Additional information: Rau computer station with contents according to pictures - monitor housing (W720 x D550 x H710 mm) with lockable monitor compartment (inside W705 x D530 x H530 mm, integrated device fan) for screens up to max. 26? suitable. There is an open storage compartment under the monitor compartment (compartment height 140 mm) - splash-proof and dirt-resistant. Worktop with cable outlet. - Basic cabinet divided into separately usable and operable keyboard and hardware compartments. Both compartments can be closed by a separate, vertical roller shutter (opening to the left). Cable inlet on the back of the cabinet as well as cable outlets in the floor and inner part. Castor set with 4 swivel castors, 2 of which have brakes. – Keyboard compartment (height 75 mm) with transverse roller  ...

General SKU315T1107 LocationBarneveld MakeAzo TypeD1104XD1104 Year of construction2005 Main Features MaterialStainless steel Specified Features - Silo Silocheck2 Closedcheck MaterialStainless steel Information Mounted on framecheck Total height4,50 mtr CEcheck Floorspace1,60x1,70 mtr Extra Specificationswith: (2x) filter unit vibration bodem, type VB1100, (2x) screw conveyor, type DFS 140x1250 NE300: size: dia. 140 mm, lenght 125 0mm (2x) stainless steel conical vessels, type D1104XD305 on frame, volume a 600 LtrSilosAZOTanks > SilosBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!