127,591 used machines on RESALE, but how to find them? Machine Search
Handy edge milling machine 230V. Scope of delivery as shown. Edge milling up to 7mm, round edge milling up to R3mm. Angle adjustable. HM plates rotatable and replaceable. This new machine comes from a warehouse clean-up. Scope of delivery incl. chip catcher (not shown here).
SPECIFICATIONS: Engine power HP: 3 Vertical leadership support Replacement tools available
GeneralUniversal turning-/milling center; Control: CELOS X with Siemens SINUMERIK ONE Working areaSwing diameter over guide ways580 mmTurning diameter550 mmMax. Turning Length1600 mmBar diameter max.104 mmWork spindle (left)Spindle bore118 mmSpindle diametre on front bearing160 mmMain drive 1Drive power (100% DC)32 kWDrive power (40% DC)36 kWSpeed range- 4000 rpmBench speed510 rpmTorque (100% DC)600 NmMax. torque (40% DC)720 NmTurning-milling spindleSpindle speed-12000 rpmDrive power (100% DC)8,8 kWDrive power (40% DC)10,5 kWSpindle taperHSK-T 63 Torque (100% DC)73 NmTorque (40% DC)90 Nmlocking moment800 NmSwivelling range+/- 120 degreeTool magazineType of magazineChain Number of tools30 Max. tool diameter78 mmMax. tool-Ø with free adjacent pockets130 mmCounter spindle ISM 102, A2-8Counter spindle as integrated spindle motor, ISM 102, A2-8 - Drive power 32/36 kW (S1-100%ED / S3-40%ED) ...
Control Other Brother C00 Speed [rpm] 10000 Travel X/Y/Z [mm] 700/400/300 Tool pick-up BBT 30 Main spindle: Technology Direct Drive Speed 10,000 rpm Power (max.) 26.2 kW Torque (max.) 92 Nm Tool holder BBT 30 Work table: Clamping area 800 x 400 mm Table load (max.) 250 kg General: Tool Magazine 21 Stations Rapid traverse in X/Y/Z 50/50/56 m/min Equipment/accessories: Chip Management Chip Conveyor Coolant Management Minimum Quantity Lubrication (IKZ), Fabr. Lubrix V5 4th axle Lehmann EA-510 with counter bearing Workpiece Clamping Hydraulic, 80-210 bar Support Control Pneumatic Automation Preparation I Automatic Work Area Door (Electric) Automation Preparation II Robot Interface Oil Mist Extraction Mechanical Separator, Fabr. Sara UC1 SD Stand riser 150 mm Setup operation Electronic handwheel Further equipment transformer
I sell a tenon machine for parallel milling, grooves for pallet tape etc. WACO T2-SL Year of construction 1984. Groove width 30mm. Motor 3,3kW Made in Germany. Available the same. With dokumentazion.
Macmon M100 Universal Milling Machine with Digital Display -Feed range in steps 9-450mm/min -Horizontal 40-2000 rpm -21 spindle speeds vertical 50-2500 rpm -Spindle holder SK40 -Projection of the V-spindle approx. 100-320mm -Installation height under spindle 350mm -Vertical Head Quill 70mm -Vertical head swivels 360 degrees -Fixed angle table 215x600mm -Milling slide path transverse manual 170mm -Vertical motor/manual 310/340mm -Table travel longitudinal motor/manual 290/310mm -X-travel 310mm -Y-travel 340mm -Z-travel 170mm -Automatic feeds and rapid traverses in all 3 axes -Total power requirement 2.5kW -Spindle drive 2.2kW -Total drive 2.5kW-380V-50Hz Dimensions: LxWxH 1.5x0.7x1.5 meters / Weight 900Kg
Table clamping surface: 300 x 1100 mm Travel x: 780 mm Travel y: 250 mm Travel z: 410 mm Cbgaxkvf39 Spindle holder: SK 40 Pinole stroke: 100 mm Spindle speeds: 31.5 - 1400 rpm Feeds longitudinally and transversely: 12.5 - 630 mm/min Feeds vertical: 6.3 - 315 mm/min electr. Connection: 380 V, 5.5 kW Space requirement: 1770 x 1500 x 2050 mm Weight: approx. 2200 kg
ORDER NO. 6623 TECHNICAL DATA - diameter range of machined pins 200mm - min length of input material 1100mm - infinitely variable feed speed + front/rear - knife head drive motor 15kW - feed motor 1,7kW Successively: - 2 toothed pulling shafts - 4-knife head - 2 smooth pulling pin shafts - electrically adjustable knife head - electrically adjustable shafts - dimensions length / width / height 3570x1300x1700mm - weight about 4000kg ADVANTAGES – German production - the possibility of turning poles into a cone – used turner, very good condition Net price: 159900 PLN Net price: 35533 EUR depending on the price 4,50 EUR (Prices may fluctuate with higher fluctuations)
Complete production line for bevel gears, consisting of 6 bevel gear milling machines Klingelnberg BF 201 including orders for contract work for sale Technical data Diameter: 240 mm Module: 10 mm Tooth width: 60 mm Dimensions: 2.3 x 2 x 1.7 m Machine weight: approx. 6,700 kg Information and data are non-binding, subject to prior sale Special features: Complete production line consisting of 6 machines with the following accessories: - Bevel gear machine - 1x interchangeable gear set - 1x test block - Mounts (proportionate) - Knife set (proportionate) - Documentation (1xOriginal / data set) Furthermore, contract gear orders could follow, catalogue goods and special bevel gear sets according to customer specifications, complete volume approx. 8,000 components / year. Asking price of the seller 18.000.- VB / per machine
Agritec floor reversing milling machine UKO 40-120, for PTO 540 rpm, power requirement 18.5-45 kw (25-60 hp) Three-point attachment frame Cat.1, working width 115 cm, total width 142 cm, lateral displacement hydraulic 26 cm, this also allows use on walls, fences, etc. Equipment with trailing grid roller for perfect seedbed preparation. Weight approx. 412 kg. Incl. cardan shaft with friction clutch. 30 knives - all new, ready for operation, incl. cardan shaft with friction clutch. Further reversing milling machine 130 cm working width in stock as well as conventional tillers from 100 to 150 cm, ploughs, cultivators etc.
Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
GeneralUniversal Milling / Turning Machining Centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools63 Floor space/WeightWeight approx.18500 KgUniv. milling head w. controlled B-axis HSK-A 100Universal milling head with controlled B-axis HSK-A 100 (only with motor spindle HSK-A 100)NC milling/turning tableNC mill-turn table 1 x T-slot as cross slot 12 x T-slots as starslots / 22,5 ° with integrated balancing sensorCoolant supply ICSCoolant through spindle centre form AD, 40 bar/23 l/min Multi-jet unit at milling head, switchable from coolant ...
used
General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min,; Control: CELOS X with Siemens 840D SL Operate Main drive 1Drive power (100% DC)33 kWDrive power (40% DC)40 kWSpeed range- 4000 rpmTorque (100% DC)580 NmMax. torque (40% DC)700 NmC-Axis Speed-4000 rpmTorque of C-Axis (holding torque)1100 NmAccuracy at point stopping0,001 degreeWorking areaSwing diameter over guide ways700 mmTurning diameter630 mmClamping chuck diameter max.400 mmDistance between spindles2260 mmBar diameter max.102 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69 ...
GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mRapid feed X / Y / Z36/36/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...
used
Machine Details Warehouse number 1105-03692 Machine type Milling machine - Universal HERMLE brand Type fp 1000 Year of construction 1988 Control type CNC Control heidenhain 355 Storage location HAGUENAU Country of origin Germany Delivery time IMMEDIATELY Freight base EXW Technical details x-travel 700 mm y-travel 630 mm z-travel 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping surface: 1000 x 490 mm Spindle speed gear stage 1 25 - 400 1/min. Spindle speed gear stage 2 401 - 1260 1/min. Spindle speed gear stage 3 1261 - 4200 1/min. Feed 5 m/min Rapid traverse 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with coolant device Sale without clamping devices
MAHO C Axis Machine Table - Table diameter: 600 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.
CME FCM 9000 Bed milling machine 5-axis Table size 9500 x 1200 mm. Travel X-axis 9000 mm. Y-axis 1500 mm. Z-axis 1500 mm. Maximum table load 5000 kg/ Mtr. Vertical milling head can be swivelled by 1°x1° CNC control Heidenhain TNC 430 CB If you have any questions about the machine, as well as a scheduling for viewing, please contact us by phone or e-mail.
KIMLA BPF 2030 CNC router was built in 2011 in Poland by POLCOM Przemysław Kimla. The machine was regularly maintained throughout its service life. In 2021, the ISEL 10 bearings along with the lead screw in the Z axis were replaced. KIMLA BPF 2030 is an excellent choice for both small and medium-sized companies with a diverse production profile. The machine enables precise machining of a wide range of materials, i.e. light metals, plastics and wood. After fitting a special cutting head, it is also possible to cut parts made of rubber and cardboard. All machining processes are performed on a large work table with an ergonomic design. The spindle, driven by a high-powered motor, rotates at a maximum speed of 24000 rpm and moves in three X,Y,Z axes with feeds of 2000 mm, 3000 mm and 500 mm respectively. Tools taken from a 10-position magazine are in turn continuously measured and calibr ...
CNC-Universal milling machine MAHO MH700 C Table: 900 x 500 mm Travels: -X: 700 mm -Y: 500 mm -Z: 450 mm Spindle stroke: 100 mm Spindle taper: ISO 40 Spindle speed range: 20 - 3150 rpm Total power need: 40 kva Control: Maho / Philips CNC 432 Machine weight: 3,3 tn
::TECHNICAL SPECIFICATIONS::: CNC Model: Selca CNC Version: 4045R Tool connection: HSK 63 Spindle power: 40Kw Number of spindle revolutions: 18000 Number of tools: 30 X Axis Travel: 1200mm Y Axis Travel: 1000mm Z Axis Travel: 600mm Rapid feed linear axes X Y Z: 60m/min Guides: roller Tilting rotary table: yes Tilting rotary table type: continuous Degrees tilting rotary table: - 30° +100° Table size: 860mm Permissible load on the board: 500Kg High refrigerant pressure: yes System with external tank with filter: yes Chip evacuator: carpet operated Other technical data: Drives: Simodrive 611 base with Selca adjustment boards The machine has been overhauled all axle roller guides, all ball screws and all bearings, axle geometry have been replaced
used
GeneralUniversal machining centre; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal600 mmCross500 mmVertical500 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmSpindle speed 20.000 rpm, HSK-A63Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Chain-type tool magazine 60 pocketsTool magazine with 60 positions, chain type with double gripper (differently from standard)Pneumatic set up station for tool loadingPneumatic set up station ...
DECKEL FP2 NC Dialog 11 Universal Milling Machine Milling Machine Travel X/300 Y/300 Z400 mm (340 mm for universal table in Z-axis) Speed infinitely variable 31.5 ... 5000 rpm Feeds 2-4000 rpm Rapid traverse 4000m/min Tool holder SK 40 Pinole stroke 80 mm Machine weight 1345 kg Main drive 5.5 kW Power consumption 11 kW The machine is currently being revised.
Type: Univer FC 100 Power: 1.2 kW Power supply: 380 Volt Current consumption: 3 A Weight ca: 125 kg Directly from the customer used from November from CH-Pratteln available.
Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T
bore capacity in steel (diameter): 25 mm throat: 175 mm bore stroke: 50 mm : 16 mm spindle taper: ISO 30 spindle turning speed range: 50 - 3000 U/min : 380 mm : 175 mm table surface area: 700 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,75 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 30 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 565 mm : 220 mm table surface area: 840 x 210 mm connected load frequency: 400 V max. distance between table and spindle-nose: max. 470 mm total power requirement: 1,1 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,3 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
NC Rotary Table Brand FIBRO, type 11.13.6.15.5.11.11.4.0120 T2 Diameter 800 mm Height: 240mm The indicated retail price is net.
SCM TECH Z5 5200 CNC woodworking center was built in 2015 in Italy by SCM Group S.p.a. This extremely efficient machine is used for precision machining of wood and wood-based materials (chipboard, plywood, etc.). It enables a number of complex operations to be performed, such as vertical drilling, horizontal drilling, grooving with a saw blade along the X axis and standard milling. The machining process is performed in 5 axes by means of a work head located inside a movable machining station. It consists of a boring head with vertical/horizontal spindles and integrated blade and electro-spindle with automatic tool exchange system. The machining station moves over a work table with suction cups that ensure secure holding of the workpiece during machining. On the inner base of the work table, in turn, there is a device designed for easy shavings removal. Each axis is driven by high-powe ...
HOFLER HF 2000L hobber/gasher with both internal/external heads Year: 2013 Installed in 2020 Less that 200 working hours Table diameter: 1500mm Table loading: 18000kg Working stroke (external hobbing): 1760mm Working range above table (external hobbing): 150-1910mm Working range above table (internal hobbing): 250-1460mm Counter support-end face above table: 800-2300mm External toothing, Max: 2000mm Internal toothing, Max: 2400mm CNC control: Siemens 840D Complete weight: 61000kg Equipped with counter support
First commissioning: 2016 Control: Heidenhain iTNC 530 incl. handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 min-1 Torque: 95 Nm Tool holder: HSK 63A Tool tensioning: hydraulic Coolant supply: outside and inside Blowing air: Outdoor Drives Linear axes Feed speed X-, Y-, Z-axis: up to 60 m/min Axle acceleration X-, Y-, Z-axis: up to 5 m/s2 Connection data Connected load: 190 kVa Fuse: 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Colour Housing, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green ...
Travel distances: 415 x 340 x 355 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Control: Heidenhain iTNC 530 Table size X: 470 mm Table size Y: 400 mm workpiece weight: 500 kg Tool changer: 30 - fold Rapid traverse: 30 m/min electronic handwheel
KORRADI UW 10 with Heidenhain equipment, details see pictures, immediately available
Universal milling machine Deckel FP1 Machine Operating voltage: 380/400 volts without feed in y direction, with angle table, work surface with 4 T-slots Condition see pictures Errors excepted!
Milling machine MACMOM M 100, year of construction 1970. Without table. At call.
maximum number of results exceeded
please refine your search
10 € 
