tos lathe used for sale

Offer 24001 Specifications: - Working width 3050 mm - Printing capacity 220 t - Passage between uprights 2550 mm - Table width 405 mm - Projection 350 mm - Installation height approx. 240 mm - Plunger stroke 270 mm - Working height approx. 920 mm - Engine power approx. 15 kW - Oil filling approx. 300 l - Space requirement approx. W 4200 x H 2980 x D 2300 mm - Weight approx. 12500 kg - With: - Swivel arm – control panel with CYBELEC control - for 4 axes Y1 + Y 2 , X , Z -Mot. Back gauge with mot. Controlled height adjustment - Crowning - Safety – light barrier - 4-fold universal die + divided. Sharpening tool 3000 mm - Deer foot tools, V – dies 2900 mm - Other tool sections - E.- Footswitch, - Support arms

CATALOG NO. 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm in advance: - pawls - sequential pulling shaft - 2 rows of clamps - pulling, sequential input shaft - 500mm planing shaft, 4-knife, 7.5kW engine - clamps - pulling, smooth, output shaft - pressure on the lead from down: - adjustable insertion table + pressure - slip shaft, smooth - 500mm planing shaft, 4-knife, 5.5kW engine - 2 slip shafts, smooth - side pressure in the back: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - smooth adjustment of feed speed 8-30m/min - electric tabletop lifting - diameters of the exhaust pipe: 2x145mm, 2x160mm - dimensions length/width/height 2050x1700x1700mm - weight 2100 kg ADVANTAGES – ideal for flooring processing – electric tabletop lifting ...

Tos WHQ 13.8 CNC Heidenhaine TNC 430 Year 2001 X 3500 Y 2000 Z 1200 W800 Table size 1800x1730 Table load 10000 kg Cooling through the spindle – yes Chipconveyor - yes ATC 60 pockets Max spindle RPM - 2800 Tools BT-50

Inv. Num. : 7260 Type: WHN 13.4 A Producer: TOS Created: 1986, GO 2003 Parameters: Control system: MEFI CNC 859 Work table length: 1800 mm Work table width: 1600 mm Maximum table load (uniform): 12 t Maximum spindle speed: 1098 1/min X-axis travel: 3000 mm Y-axis travel: 2000 mm Z-axis travel: 800 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Cone: ISO 50 Machine height: 3900 mm Machine length: 6200 mm Machine width: 5930 mm Machine weight: 32 t

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table-size: 800x400 mm quill stroke: ca. 100 mm turning speed - milling spindle: 40-2000 U/min feed range: X, Y: 8-400 mm/min feed range: Z: 4-200 mm/min rapid travel - x-direction: 2000 mm/min rapid travel in y-direction: 2000 mm/min rapid traverse cross: 1000 mm/min vertical head swivelling: +/- 90 Grad weight of the machine ca.: 2 t dimensions of the machine ca.: 2,1x1,7x1,7 m Universal milling machine with DRO for 3 axis, sviweable vertical milling head and horizontal milling spindle. -incl. knee and milling 3 arbors for milling discs -incl. 9 tool holder ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7266 Type: WH 13 Producer: TOS Created: 1972 Parameters: Work table length: 1800 mm Work table width: 1600 mm X-axis travel: 1250 mm Y-axis travel: 2200 mm Z-axis travel: 1700 mm Equipment: 4x extensions in the length of 4x1 m 8x tracks for 1000 mm extension Turntable New ball screws and bearings Tools & Equipment

Inv. Num. : 7273 Type: WH 10 NC Producer: TOS Generated:- Parameters: Work table length: 1120 mm Work table width: 1000 mm X-axis travel: 1000 mm Y-axis travel: 900 mm Z-axis travel: 630 mm

BHB 40 CNC cylindrical grinding machine Control: Marposs Servo motors: Indramat Producer: Czech Republic TOS The machine is new, it has never been used. You need to upload a program to the grinder or use a new control. The machine was started 7 years ago and after uploading a simple program, everything starts. There is everything for the machine tool, starting from a complete set of covers, through control cabinets, hydraulic systems, and manuals. Machine stored, not connected. Technical specifications: - distance between centers: 1000 mm - grinding diameter: 400 mm - wheel dimensions: 750 mm x 100 mm x 305 mm - maximum workpiece weight: 500 kg - cone: MK 5 - weight: about 10 tons

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 quill stroke: 100 mm spindle turning speed range: 40 - 2000 U/min voltage: 380 V Table dimensions: 800 x 400 mm weight: 1,9 t total power requirement: 3,0 kW dimensions of the machine ca.: 1,90 x 1,80 x 1,90 m digital readout, 3-axis: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck, scroll chuck -Manufacturer: TOS, three-jaw chuck Chuck size Ø 80 mm -Passage: Ø 16 mm -Bolt circle: Ø 70 mm -Weight: 1.2 kg

TOS W100 Horizontal Boring Mill DRO Spindle 100 mm Spindle speeds 7.1-1120 rpm X/Y/Z/W Axis- 1600/1120/1250/900 mm Table size 1250x1250 mm Max table load 3 ton Table type rotary Facing chuck diameter 600 mm Slide travel 210 mm Max facing diameter 900 mm Facing chuck speed range 7.1 - 224 rpm Total power 15 kW Dimension 6020x3000x3500 Weight 14000 kg Remarks: faceplate is available, under a fixture

CNC tool milling machine TOS Žebrák Manufacturer: Intos Žebrák Type: FNG 50 CNC E Year of construction 2001 Control system: Heidenhain TNC 426 Spindle taper: ISO40 (SK40) Spindle speed: 0-3150 rpm Axle travel: X-700mm Y-500mm Z-500mm Machine weight:2550 kg Rotatable head: -90° ~ +90° Accessories: Documentation Riding bike Cooling Tool holder see photo

Inv. Num. : 7325 Type: W 9 A Producer: TOS Created: 1983 Parameters: Work table length: 1000 mm Work table width: 1120 mm X-axis travel: 1250 mm Y-axis travel: 1000 mm Z-axis travel: 1400 mm

Machine status: brand new, in working condition. Year: 2021 Reason for sale: the machine doesnt perform the functions needed for our production cycle (not included in the scope and impossible to add). Ownership: Spetztekhosnastka Ltd., Ukraine Detailed machine specifications will be provided on request.

Description: Tool holder: SK 40 Spindle speed: 315 - 2000 rpm Table dimensions: 700 x 300 mm With 6 grooves and an attached machine vice Jaw width: 125 mm Travel distances: X: approx. 400 mm Y: approx. 300 mm Z: approx. 300 mm The machine is equipped with a three-axis digital display weight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,500 x 2,000 mm

Double shaft multi-saw TOS SVITAVY PWR 402 440/200 - year of production 2005 - DTR documentation - Czech production track width 440 mm cutting height 55 mm - 200 mm disc diameter 350 mm 22 and 30 kW main engines 3 kW feed motor feed speed adjustable on the inverter the top five pinch rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication rollers diameter 60 mm, wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 43 cm spigot diameter 200 mm transport dimensions (length / width / height) 280/245/230 cm weight 4770 kg

cutting width 350 mm cutting height 120 mm engine power 30 kW max. blade diameter 400 mm feed continuously adjustable up to 60 m / min spindle diameter 60 mm sleeve diameter 80 mm table top dimensions 960 x 2100 mm max. workpiece width 550 mm min. workpiece length 800 mm three rows of pawls two top rollers stub diameter 2 x 150 mm dimensions of the machine (length / width / height) 250/245/220 cm weight ~ 1800 kg

track width 440 mm cutting height 55 mm - 200 mm disc diameter 320 mm 2 x 75 kW main engines 3 kW feed motor feed speed adjustable on the inverter up to 60 m / min the top five pinch rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication rollers diameter 60 mm, wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 440 mm spigot diameter 200 mm transport dimensions (length / width / height) 280/245/230 cm weight 5120 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in a central point on the horizontal axis, on which tools in the form of discs are installed. Depend ...

Multisaw TOS SVITAVY PKSN 32A 350/120 – Czech production cutting width 350 mm cutting height 120 mm engine power 30 kW max. disc diameter 400 mm feed smoothly adjustable up to 60 m/min spindle diameter 60 mm sleeve diameter 80 mm table top size 960 x 2100 mm max. element width 550 mm min. element length 800 mm three rows of pawls two top rollers spigot diameter 2 x 150 mm machine dimensions (length/width/height) 250 / 245 / 220 cm weight ~ 1800 kg

Double shaft multisaw TOS SVITAVY PWR 402 440/200 – year of manufacture 2005 – technical documentation – Czech production track width 440 mm cutting height 55 mm - 200 mm disc diameter 350 mm main engines 2 x 55 kW feed motor 3 kW feed speed adjustable on a gear motor five upper pressure rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication shaft diameter 60 mm wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 43 cm spigot diameter 200 mm transport dimensions (length / width / height) 280 / 245 / 230 cm weight 4770 kg Multisaws are machines used in the wood industry mainly for cutting prisms, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle ...

Toshiba IS 450 GSW injection molding machine Year of production - 2007 Parameters: Closing force: 4,410 kN Screw diameter: 70 mm Injection volume: 1480 cm³ Shot weight: 1360 g Min.height of the fastening plate: 1230 mm Min.width of the fastening plate: 1230 mm The distance between the columns - 870X870 mm Ejector force: 243 kN Ejector stroke length: 1050 mm Maximum injection pressure: 178 MPa Oil tank capacity - 1500 liters Machine length: 7600 mm Machine width: 2200 mm Machine height: 2100 mm Injection weight: 22,000 kg Machine with a robot and a cage

Manufacturer / type Toshiba IS650GTW i59 Closing force [tons] 650 Year of production 2007 Screw diameter [mm] 95 Number of aggregates 1 type of screw Type: 95DBG-AT, Part # F049997, Stellite12 The minimum height of the mold [mm] 450.0 weight [kg] 32100 installed power kW 101.2 thermal insulation on the aggregate - blanket on the aggregate upper / lower YES nominal power of heaters for units KW 43.95 length mm 7940 width mm 2670 height mm 2300 occupied area of 21.2 m² occupied area with a cage 32.0 m² hydraulic pump 1 SQP43-50 hydraulic pump 2 SQP43-50 MC09 robot (W 733-0610)

Description: The machine is in good technical condition. Working spindle diameter: 110mm Table clamping surface: 1250 x 1250mm Machine dimensions lxwxh, 5290x4063 mm. Machine weight, 27000 kg By prior arrangement, the possibility of a tour in progress.

Type: VSP 50 CNC Parameters: 11750 mm, 2000 mm Manufacturer: Tos Description: The machine is in good technical condition, after agreement the possibility of testing. Main dimensions maximum and smallest distance of the spindle axis from the stand guide: -version without tool magazine 2500/500 mm -version with tool magazine 2500/600 mm maximum and smallest spindle end distance: -from bed guide 1480/380 mm -from the base of the machine 1860/760 mm headstock adjustment 2000 mm adjustment of the headstock on a machine with a tool magazine 1900 mm arm adjustment 800 mm Sleigh adjustment: -version with one bed 1000 mm -version with two beds 4500 mm -version with three beds 8000 mm -version with four beds 11500 mm Maximum drilling diameters: diameter of drilling fully into steel with a strength of 600 MPa 50 mm diameter of drilling completely into cast iron with a strength o ...

Location: Czech Republic Description: Working spindle diameter 100 mm X-axis travel 1250 mm Travel of the Y axis 1100 mm Spindle speed 10 - 1200 /min. Central cooling does not Spindle extension (W) 630 mm Z axis travel 970 mm The toolbox does not Spindle clamping cone ISO 50. Power of the main electric motor 22 kW Table clamping surface 1000 x 1120 mm Max. workpiece weight 3000 kg Dimensions L x W x H 4746 x 3000 x 3340 mm Machine weight 13700 kg

Working spindle diameter: 75mm Table clamping surface: 950x950mm Digital measuring X-axis travel 1,250 mm Y-axis travel 900 mm Z-axis travel 1,060 mm Spindle speed 18 - 1800 /min. Spindle extension (W) 560 mm Power of the main electric motor 11 kW Max. table load 3,000 kg Dimensions LxWxH 4500 x 3400 x2800 mm Machine weight 10t Inspection possible upon agreement. Accessories: support column

Machine weight: 38000 kg Working spindle diameter: 130 mm Spindle taper: ISO 50 Spindle speed: 1800 rpm Table clamping surface: 1800 x 1600 mm Transverse table movement - x axis: 3500 mm Longitudinal table movement - z axis: 2000 mm Vertical table movement - y axis: 2500 mm

The machine is in good technical condition. Table working area: 950 x 950 mm Maximum table load: 3000 kg Maximum tool speed: 1800 rpm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Spindle extension W: 560 mm Po by prior arrangement, the possibility of a tour in progress.

Clamping surface of the table: 2500x1800 mm Longitudinal movement of the table - x-axis: 3000 mm Transverse table movement - y axis: 1800 mm Vertical movement of the table - z axis: 1600 mm Spindle speed: 6000 rpm Chip conveyor:: Yes Internal cooling: : Yes Number of spindles:: 1

The machine is in good technical condition, control system HEIDENHAIN 310. With circular interpolation. A tour is possible upon agreement. Basic parameters 100 mm; 1000 x 1120 mm Machine weight: 13400 kg Total power of the machine:: 20 kW Diameter of the working spindle: 100 mm Spindle taper: ISO 50 Spindle speed: 4 - 1400 rpm Table clamping surface: 1000 x 1120 mm

Type: H 100A Parameters: 100 mm, 1250 mm Manufacturer: Tos Year of production / SO / GO: 1970 / - / 2004 Description: Machine in good technical condition. Possibility of testing after agreement. Working Spindle Diameter 100 Mm Iso 50 Spindle Taper Table Clamping Area 1250 X 1250 Mm Max. Workpiece weight 3000 Kg Longitudinal Table Movement - X Axis 1250 Mm Transverse Table Movement - Z Axis 1250 Mm Vertical Table Movement - Y Axis 1120 Mm

Weight of the machine: 32000 kg Total power of the machine:: 37 kW Working spindle diameter: 130 mm Cross table movement - x axis: 2000 mm Vertical table movement - y axis: 2500 mm Machine dimensions LxWxH: 7480x6300x4800 mm

The WHN 13.8B CNC boring machine is in good technical condition, HEIDENHAIN control system. The year of GO 2001 Total machine input:: 37 kW Working spindle diameter: 130 mm Spindle taper: ISO 50 Spindle speed: 2500 rpm Clamping surface of the table: 1800x2200 mm Transverse movement of the table - x-axis: 3500 mm Longitudinal movement of the table - z axis: 1200 mm Vertical table movement - y axis: 2500 mm

WH 105 CNC with Heidenhain iTNC 530 control system is in good technical condition. By agreement, it is possible to see it in operation. AME brand belt filter system with PS50 belt filter attachment, belt skimmer with conveyor belt, micro aerator type 300, lifting system, pump for feeding the machine, external cooling 3 bar, 40 l/min and internal cooling 20 bar with container for coolant 1000 l. Standard chip conveyor for x 1800mm with stepped grate from AME. Spindle speed: max 3300 rpm Transverse movement of the table - x-axis: 1800 mm Longitudinal movement of the table - z axis: 1250 mm Vertical table movement - y axis: 1600 mm Turntable: : 1400x1600 mm B: 360°

Year of Manufacture/SO/GO: 1987/-/2001 Description: The machine is in very good technical condition, dismantled, stored in storage. 5 persons X (table lift) 5000 mm Y (vertical lift of headstock) 2000 mm Z (longitudinal displacement of the column) 1250 mm W (spindle travel) 800 mm Engine power: 37 kW Spindle speed range: 1.25-900 rpm Rapid feed: 4000 mm/min Spindle diameter: 130 mm Table: 1800 x 1800 mm Machine weight: 12000 kg Spindle taper: ISO 50. control system HEIDENHAIN

Year of manufacture/SO/GO: 1988/-/2000 Table clamping dimensions - width x length 400x1400mm Maximum workpiece weight 800kg Working stroke - longitudinal, transverse, vertical 1000x400x400mm Conical cavity in the spindle ISO 150 Range of revolutions in the spindle - 18 degrees - manual 35-1800rpm-1 Working feeds - 16 degrees - longitudinal 10-1800mm.min-1 - transverse 10-1800mm.min-1 - vertical 2.5-450mm.min-1 Longitudinal rapid traverse 4000mm.min-1 - transverse 4000mm.min-1 - vertical 1000mm.min-1 Spindle electric motor - power 7.5kW Dimensions LxWxH 3180x3310x2400mm Weight including switchboard 4400kg.

Type: FGS 63B CNC Parameters: 630 mm, 2000 mm Manufacturer: Tos Year of production / SO / GO: 1999 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. TNC426 control system. Technical parameters: Working range - travels: X-axis: 1250 mm Y axis: 850 mm Z axis: 500 mm Max. table load: 1000 kg Table clamping area: 630 x 1600 mm Working feed: X-axis: 1 - 40,000 mm / min Y axis: 1 - 4000 mm / min Z axis: 1 - 2000 mm / min

The machine is in good technical condition, testing possible upon agreement. Revolving diameter mm 160 Center distance mm 250 Grinding wheel: diameter x hole x width mm 250 x 76 x 20 The largest width of the grinding wheel mm 40 Cone of the working spindle Morse 3 Cone in the tip socket of the tailstock Morse 2 Diameter of the three-jaw chuck mm 80 Rotation of the grinding spindle number of degrees 60 Rotation of the working spindle number of degrees 90 Rotation of the table on both sides number of degrees 10 Speed ​​of the grinding spindle min - 1 2420.3290 The largest longitudinal movement of the table mm 290 The smallest longitudinal movement of the table mm 1 Transverse movement of the grinding spindle mm 100 Quick adjustment of the grinding spindle mm 16 Total machine power kW 2.5 Maximum weight of the workpiece kg 10 Floor plan of the machine: length x width mm 1900 x 1100 Weig ...

The machine is in good technical condition, after prior agreement the possibility of testing. Longitudinal table movement - axis x 1000 mm Transverse table movement - z axis 320 mm Vertical table movement - y axis 350 mm Grinding spindle speed 2280, 2600 rpm Max. workpiece weight 280 kg machine weight 3200 kg

The machine is in good technical condition, it is possible to test it by agreement. Max. grinding diameter: 280 mm Max. grinding length: 630 mm Max. workpiece weight: 65 kg Longitudinal feed: 760 mm Power of the main electric motor: 4 kW Dimensions lxw: 2800x1600 mm Machine weight: 2250 kg. cooling, magnetic separator, dresser holder in tailpiece, 2 x flange with disc, balance mandrel, closed and open bezels are from another machine and must be adapted, internal grinding with fortune, mandrels for internal grinding, protective covers against cooling emulsion, replaced hydraulic oil, hydraulic circuit fully functional without oil leakage, mechanical condition very good, no play on the working headstock, the distributor is outside the machine.

The machine is in good technical condition, after prior agreement the possibility of testing. Max. grinding length 1,000 mm Max. height of ground object with new discs (from the table) 350 mm Longitudinal table movement 1,060 mm Transverse table movement 350 mm Vertical movement of the grinding headstock 400 mm Distance of the spindle axis from the table clamping surface min. 75 mm, max. 475 mm Vertical cutting feed - 1 scale division 0.001 mm Grinding wheel (ø x width x hole ø) 250 x 25 x 76 mm Grinding wheel speed ø 250 mm 2,522 min-1 Partially worn grinding wheel speed 3 319 min-1 Grinding headstock motor power 3 kW Machine dimensions Machine floor area approx. 4,100 x 2,000 mm Machine height 2,125 mm Machine weight 3,400 kg Electrical equipment Total machine power 9.3 kVA Accessories Magnetic clamping plate 300 x 1,000 mm , height 100 mm

Inv. Num. : 7242 Type: MC 100V Producer: TOS Trenčín Created: 1997 Parameters: Control system: Heidenhain Work table length: 1080 mm Work table width: 579 mm Maximum spindle speed: 8000 1/min X-axis travel: 1016 mm Y-axis travel: 610 mm Z-axis travel: 508 mm Tool magazine capacity: 40 Machine weight: 6000 kg

Inv. Num. : 7268 Type: WFN 180 HSQ Producer: TOS Created: 2001 Parameters: Control system: Heidenhain 430 m Shrek Operating hours: 110727 h Maximum spindle speed: 24000 1/min X-axis travel: 2500 mm Y-axis travel: 2000 mm Z-axis travel: 1240 mm

Inv. Num. : 7270 Type: WHN 13.8 CNC Producer: TOS Created: 1996 Parameters: Control system: Heidenhain 426 C Hours: 145790 h Maximum spindle speed: 1500 1/min X-axis travel: 3500 mm Y-axis travel: 2000 mm Z-axis travel: 1250 mm W-axis travel: 800 mm B-axis: 1600 x 1800 mm

Inv. Num. : 6528 Type: WH 80 Producer: TOS Created: 1966 Parameters: Spindle diameter: 80 mm Cone: Morse 5 Equipment: DRO Vice Dörne Console (1000 x 500) The machine is in good technical condition.

Inv. Num. : 5851 Type: IS 280 GS Producer: TOSHIBA Created: 1996 Parameters: Operating hours: 24,593 h Total number of injections: 7,410,962 Clamping force: 2774 kN Screw diameter: 60 mm Injection capacity: 930 cc Injection mass: 855 g Min. height of the clamping plate: 900 mm Min. width of clamping plate: 900 mm Distance between uprights (horizontal): 610 mm Distance between uprights (vertical): 610 mm Ejection force: 152 kN Ejector stroke length: 760 mm Maximum Spray Pressure: 192 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1900 mm Machine height: 1900 mm Injection weight: 12400 kg

Roll grinding machine TOS BEV 100/6000 for refurbishment.

Inv. Num. : 7192 Type: BU 28/630 CNC Producer: TOS Created: GO 2004 Parameters: Total power requirement: 10 kVA Maximum grinding length: 630 mm Tip stroke: 140 mm Maximum weight of the workpiece: 65 kg Distance between tips: 630 mm Machine height: 1600 mm Machine length: 3750 mm Machine width: 2300 mm Machine weight: 3000 kg

Inv. Num. : 5833 Type: FKH 50 Producer: TOS Created: 1987, GO 2017 Parameters: Control system: Brázdil Operating hours: 500 h Maximum spindle speed: 1800 1/min X-axis travel: 940 mm Y-axis travel: 940 mm Z-axis travel: 470 mm Spindle power: 7.5 kW Tool holder: ISO 50 Accuracy: 0.02 mm Spindle extension: 120 mm Machine height: 3200 mm Machine length: 2800 mm Machine width: 2600 mm Equipment: Support plates Grips Complete overhaul carried out

Key data: 3000 mm, 1800 mm, 1600 mm

Inv. Num. : 6982 Type: OPTIMA Producer: TOS Created: 2005 Parameters: Work table length: 2500 mm Work table width: 1800 mm X-axis travel: 3000 mm Y-axis travel: 1800 mm Z-axis travel: 1600 mm