We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
124,973 used machines on RESALE, but how to find them? Machine Search
used
The machine is in good technical condition, after agreement possibility of inspection in running. Heidenhain control system X axis = 1016mm Y axis = 610mm Z axis = 508mm Table load: 600kg Number of tools in magazine: 40 Dimensions L x W x H: 3280 x 2260 x 2400mm Weight: 6000kg
used
turning diameter over bed: 655 mm turning diameter over slide rest: 390 mm turning length: 1250 mm spindle bore: 82 mm spindle turning speed range: 9-1120 U/min feeds: 0,049-3 mm/U total power requirement: 12 kW weight of the machine ca.: 5,2 t required space: 3,5 x 1,9 x 1,7 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 130 mm x-travel: 2000 mm y-travel: 2000 mm z-travel: 1250 mm w-axis: 800 mm Control: Heidenhain type: TNC 135 table surface area: 1800x1800 mm Table load: 12000 kg power capacity: 30 kW 09-08 machine number The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Point lathe SU 63 A in good condition Machine weight: 5600 kg Circulating diameter above the bed: 630 mm Revolving diameter above support: 360 mm Distance between spikes: 2000 mm
used
The machine is in good technical condition. Max. diameter above bed: 1050 mm Distance between spikes: 2000 mm Diameter above transverse ram: 727 mm Max. workpiece weight: 5000 kg Spindle caliber: 102 mm Shaft motor power: 22 kW Tailstock: yes Chuck type: 3 jaws Length x width x height: 4860 × 1970 × 1500 mm Weight: 7600 kg Upon prior agreement, the possibility of inspection while in operation.
used
x-travel: 720 mm y-travel: 255 mm Z-Travel: 400 mm clamping surface area: 1000 x 250 mm range of revolution per miute: 40...3150 / 8 step U/min tool taper: ISO 40 (SK40) milling head swivable : +/- 90 ° Quill Stroke: 127 mm feed:Z: 8,5...136 / with 9 step rapid traverse:: X/Y/Z: 2500 mm/min feed:: X/Y: 28...450 / with 9 step mm/min. total power requirement: 3.2 (4 kVA) kW dimension machine approx. LxWxH: 1.8 x 1.6 x 2.4 m Weight of the machine approx.: 1,5 t
used
The machine is in good technical condition. Revolving diameter above bed: 320mm Distance between spikes: 1250mm New belt. New electric motor. The lathe has two main gears, the others are controlled by a new frequency converter (5.5 kW), which is strong and fast. By prior arrangement, the possibility of a tour in progress.
used
Machine weight: 11900 kg Total machine input:: 30 kW Circulating diameter above the bed: 1250 mm Revolving diameter above support: 940 mm Distance between spikes: 8000 mm Spindle drilling: 102 mm Max. workpiece weight: 6000 kg Clamping plate diameter: : 1250 mm Machine dimensions lxwxh: 10800x1970x2000 mm
used
Universal milling machine SN55/2000 with steady rest.
used
MAX DIAMETER 550 MAX MODULE 6
used
MAX DIAM 550 MAX MODULE 6
used
Inv. Num. : 6702 Type: WHN 9B Producer: TOS Created: 1975 Parameters: X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Equipment: DRO
used
Inv. Num. : 6737 Type: WHN 11 Producer: TOS Created: 1970 Parameters: Working table length: 1250 mm Working table width: 1250 mm Maximum table load (uniform): 8000 kg Maximum spindle speed: 900 1/min X-axis travel: 1600 mm Y-axis travel: 1250 mm Z-axis travel: 1000 mm Spindle power: 34 kW Spindle diameter: 110 mm
used
Inv. Num. : 6762 Type: WHN 9 B Producer: TOS Created: 1975 Parameters: Repair history: 30.8.2021: Repair of the rotary table 31.5.2021: Repair of the lubrication system for guide surfaces 18.02.2021: Adjustment of the rotary table coupling 22.10.2020: Replacement of the sealing elements of the hydraulic cylinder of the tool clamping Replacement of the tool support bearings Replacement of hydraulic hoses for tool clamping 21.10.2019: Replacement of the electromagnetic clutch 09.10.2019: Brush holder - carbon 31.1.2017: adapted quick-shift clutches with replaced spark plugs and shift knobs on the "Y" axle 11.03.2017: Lockshift clutch
used
CNC Heidenhain TNC 426 with handwheel HR 410 X = 3500 mm Y = 2500 mm Z = 1250 mm W = 800 mm Table dimensions 1800 x 2200 mm Spindle diameter 130 mm Max. spindle speeds 2500 RPM External coolant 2-axis manual milling head TOS HUR 50 year 2004 almost unused.
used
CNC controller: FANUC 15i-M Axes; X-axis travel mm: 9.000 Y-axis travel mm: 3.900 Z-axis travel mm: 900 W-axis travel mm: 1.600 (distance between columns 3.100 mm) Distance spindle nose - table surface mm: 2.440 Feed rates m/min: 6 (X,Y,Z) 3 (W) Rapid traverse m/min: 20/9 (X,Y) 10(Z) 6(W) Worktable; Number of pallets: 2 (table automatic changer) Table dimensions mm: 2.700x8.000 Max. workpiece weight kg: 20.000 Spindle; Spindle speed rpm: 5-3.000 (2 ranges) Spindle drive power kW: 30(50% ED)/22 Spindle torque Nm: 2.170 Tool system; Tool holder: MAS BT50 Tool magazine slots: 180 Equipment; Chip conveyor Signal lamp High pressure pump Tool breakage probe Preapared for RENISHAW sonde RENISHAW Measuring probe Rated power kVA: 150 AAC (Automatic Attachement Changer): Capacity = 5 Attachements and their cases: 1) Snout 190 2) Small Angle head 5 Faces Cutter Head ...
used
Double Column Machining Center TOSHIBA MPC-3180B Table mm.8000 x 2700 Distance between columns mm.3100 X mm.9000 Y mm.3900 Z Verticaal RAM stroke mm.900 W Vertical Crossrail stroke mm.1600 Automatic indexed every 5 degrees 5 face head Distance table to spindle nose mm.2440 Table load Kg. 20.000 Spindle speed 5-3000 rpm 2 ranges Spindle taper BT 50 Ram section 380 x 380 Machine dimensions mm.29110 x 9900 x 7260 Machine weight Kg. 151.000 Year 2007 Standard options : 5-face cutter head Automatic attachment (5-face cutter head or other attachments)index (AAI) (4-position index by 90.) Automatic tool loading/unloading device for vertical spindle and horizontal spindle) CNC controller including standard and pack specifications Pendant operation box with electrically-driven free arm Hydraulic unit Oil cooling unit (AKZ 908) Hydraulic crossrail servo balancing s ...
used
TOS SN 500S/1500 universal lathe was built by the Czechoslovakian factory TOS Trenčín. The conventional lathe is used for machining rotating parts such as a shaft or disc with a maximum length of 1500 mm, in single unit or small batch production. The machine’s rigid, stable design with a high-power main motor significantly increases production efficiency and allows full utilisation of the tools. The TOS SN500-S lathe for metal performs machining on workpieces with a maximum diameter of 500 mm (turning over bed), 270 mm (turning over support) or 700 mm (turning in bridge). Workpieces machined on the machine are characterised by excellent quality and precision. The total weight of the TOS SN 500 S 1500 lathe is 1895 kg. Technical parameters of the TOS SN 500S/1500 metal lathe - maximum turning length: 1500 mm - turning diameter in the bridge: 700 mm - turning diameter above th ...
used
Spindle diameter: 120 mm Cross X: 3500 mm Vertical Y: 2500 mm Table length: 2200 mm Table width: 1800 mm Positions ATC: 60 Number of pallets: 1 CNC Brand: Heidenhain X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Speeds / ranges: 3000Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate ...
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Number: 3x bezels available -Price: per piece -Dimensions: 370/280/H90 mm -Weight: 10 kg
used
There are one TOS WH10 TNC and one TOS WH10 CNC available, x-travel: 1250mm, y-travel: 1100mm, z-travel: 1000mm, W-travel: 600mm, table dimensions: 1100x1000mm, with accessories, various tools, holders, spindles, cutter heads, boring heads, tool cabinets and clamping screws.
used
Working range: 1000mm/355mm, table size: 1400mm/250mm, spindle: SK50, digital display: Mitutoyo.
used
Travel X/Y/Z: 850mm/500mm/450mm, speed range: 35-18000rpm with 18 steps, table dimensions X/Y: 1250mm/400mm. Control: Heidenhain TNC355, tool holder: SK40, weight: approx. 5500kg. Including an assortment of tools. Documentation available.
used
Length: 5650mm, width: 2960mm, height: 1850mm, with documentation, without lifting device and roller conveyer, an inspection is possible.
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Dimensions: 370/280/H90 mm -Weight: 10 kg
used
grinding diameter: 500 mm grinding length: 2900 mm centre height: 250 mm Control: Siemens Sinumerik 840D centre distance: 3000 mm stroke of the table: max. 3200 mm table feed: 0,001 - 4000 mm/min rapid traverse of table: 9 m/min table swivelling +/-: +4/-2 Grad grinding wheel size: 500x100x203 mm peripheral speed: 18 - 36 m/sec spindle speeds: 6 - 900 U/min grinding head swivelling: 90 Grad tailstock quill taper MT: 5 tailstock quill stroke: 80 mm grinding spindle drive: 9,5 kW working spindle drive: 0,1 - 3,1 kW hydraulic motor: 2,2 kW max. workpiece weight between centers: 500 kg workpiece weight in steadies max.: 840 kg total power requirement: 58 kVA weight of the machine ca.: 14,1 t dimensions of the machine ca.: 8,9 x 3,42 x 1,94 m CNC control SIEMENS SINUMERIK 840D with operating panel OP 10 and color flat screen TFT 10,4 with machine control panel MPC 19 remote control panel ...
used
Round Dividing Table, Rotary Table, Circular Dividing Table TOS SM500 Ø 500 mm 360° Division used, tested ! Dimensions: 700 x 700 x 200 mm
used
Description: Without additional Accessories weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,300 x 1,600 mm
used
turning diameter over bed: 500 mm turning diameter over slide rest: 320 mm turning length: 1000 mm centre height: 250 mm centre distance: 1000 mm spindle bore: 56 mm spindle turning speed range: 14 - 2240 U/min spindle nose: DIN 55027 Gr. 6 feeds - longitudinal: 0,023 - 4,8 mm/U feeds - cross: 0,011 - 2,4 mm/U face slide travel: 300 mm upper slide travel: 140 mm thread - mm pitch: 0,25 - 60 mm thread - inch: 120 - 1/2 Gg/ thread - module: 0,125 - 15 mm tailstock quill diameter: 80 mm tailstock quill stroke: 180 mm tailstock taper MT: 5 total power requirement: 7,5 kW weight of the machine ca.: t dimensions of machine L x W x H: 2,42 x 1,23 x 1,93 mm Accessories: 3-jaw chuck 250 mmø, MULTIFIX-toolpost with various inserts, drill chuck, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
grinding diameter:630 mm grinding length:3000 mm centre height:315 mm total power requirement:35 KVA weight of the machine ca.:13,3 t
used
Hydraulic pump TOS RAKOVNIK GAR1-020-41PS-1K Nominal pressure: 16 MPa ( 160 bar ) Nominal displacement volume: 20 cm3 rated speed: 1500 rpm shaft: Ø 22 mm shaft length: 40 mm groove width: 6 mm flange: Ø 110 / 144 x 150 mm bolt circle diameter: Ø 148 mm hole diameter: Ø 13 mm control valve: VTK 20-6-350 New ! Dimensions: 390 x 275 x 150 mm
used
Dividing head with 3 jaw chuck and centering point TOS DU-250 AS ( DU-250AS ) Ø 125 IU 125 M 1- 1 max 4500 rpm center height 135 mm used, tested ! Dimensions 600 x 400 x 320 mm
used
MAX DIAM 500, MAX MODUL 8 , PLC , DRO
used
Including chipconveyor Swing over bed: 630 mm Distance centre tot centre: 1000 mm Max longitudinal travel Z-axis: 500 mm Max cross travel X-axis: 320 mm Dia of spindle bore: 92 mm Power on the spindle: 17 kW Number of speeds: 2 > 3000 rpm Command: Siemens Sinumerik 810D Total power needed: 52 kVa Length: 5500 mm Width: 2200 mm Height: 2100 mm Weight: 6,6 ton Toolchanger: yes Number of tools: 12 positions
used
Drilling capacity: 30 mm Throat: 30 mm Spindle taper: 30 CNC Brand: Heidenhain CNC Model: HeidenHain TNC 430 5 Axis CNC Horizontal borer Spindle Hours 18.300 Optional HU 50 Universal milling head ( rotation 1 direction C-Axis) Hydraulic tool clamping External coolant system X - Travel: 1250mm Y - Travel: 900mm Z - Travel: 630mm W - Travel: 1000mm Table Length: 1120mm Table Width: 1000mm Table load: 3000 Speeds / ranges: 2500Rpm Power: 30kW Spind ...
used
Ref. -No.: 10320 Manufacturer: TOS Type of control: Digitalanzeige - Mitutoyo Control: Konventionell Storage location: Halberstadt Country of origin: Tschechien Tip length: 1500 Centre Height: 280 mm Centre Distance: 750,1000,15000,2000 mm Spindle Bore: 56 mm Swing diameter over bed: 500 mm Number of speed levels: 18 Circumferential diameter over the support: 320 mm Circumferential diameter over the bed recess: 560 mm Bed length relieved from headstock: 300 mm Universal chuck diameter: 250 mm Diameter of the clamping disc: 500 mm Further information: Universal center lathe
used
Key data: 130 mm, 4000 mm, 2500 mm
TOSHIBA BP-130R22 Year 2007 SPINDLE DIAMETER 5.12" (130mm) TAPER IN SPINDLE #50 VERTICAL TRAVEL, Y-AXIS 100" (2500mm) CROSS TRAVEL, X-AXIS 160" (4000mm) SPINDLE TRAVEL, Z-AXIS 28" COLUMN TRAVEL, W-AXIS 60" TABLE SIZE (BUILT IN B-AXIS) 86.6" X 70.8" TABLE LOAD CAPACITY 44,000 LBS TABLE INDEXING B-AXIS 0.001 DEGREE SPINDLE SPEEDS (3-RANGES) 5-2500 RPM EQUIPPED WITH: TOSNUC 888 CNC CONTROL 60-STATION AUTOMATIC TOOL CHANGER THROUGH SPINDLE COOLANT CHIP & SPLASH ENCLOSURE CHIP CONVEYOR 40/30 HP SPINDLE MOTOR NOTES: INSPECT IN PLANT UNDER POWER
used
Key data: 130 mm, 3000 mm, 2000 mm
Inv. Num. : 6957 Type: WHN 13 Produzent: TOS Erzeugt: 1976 Parametern: Arbeitstischlänge: 1800 mm Arbeitstischbreite: 1800 mm Maximale Tischbelastung (gleichmäßig): 120.000 kg Verfahrwege X-Achse: 3000 mm Verfahrwege Y-Achse: 2000 mm Verfahrwege Z-Achse: 800 mm Spindeldurchmesser: 130 mm DRO
used
Ref. -No.: 10316 Manufacturer: TOS Year of construction: 1996 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Slovakia Machine length: 3450 mm Machine width: 2236 mm Machine Height: 2000 mm Weight Of The Machine Ca.: 4,4 t Grinding wheel: 260 mm Table Dimensions (Lengthxwidth): 1500 x 400 mm Height of grinding with new grinding wheel (without magnetic plate): 500 mm Grinding wheel fx width x bore: 350 x 40 - 80 x 127 mm Width of the composite grinding wheel: 200 mm Max. load on the work table: 5000 N Table surface: 400x1000 / 1500 mm Max. distance of the spindle axis: 675 mm Max. length of grinding: 1000/1500 mm
used
Manufacturer: Toshiba, Type: EX 40-4MCRD2, Modell: Programmmable Controller, Seriennummer: 94N-2025,
used
Manufacturer: Toshiba, Type: Programmable Controller, Modell: EX20-1MCRB5, Seriennummer: 5602167,
used
Inv. Num. : 6989 Type: WH 10 NC Producer: TOS Created: 1984 Parameters: Work table length: 1120 mm Work table width: 1000 mm Maximum table load (uniform): 3000 kg Minimum spindle speed: 16 1/min Maximum spindle speed: 1250 1/min X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Cone: ISO 50
used
Lathe TOS SUI 40-50 Center width 1500 mm Circulation over machine bed 500 mm Circulation over support 320 mm Spindle speed 14 to 2240 rpm Quick Release - Steel Bracket § Jaw wedge bar chuck Machine is ready for operation and in good condition
used
Key data: 2500 mm, 3000 mm, 2000 mm
Tos hulin CNC Sinumerik 840 C Year 1999 Table dia : 2500 mm Max turning did 3000 mm Max Turning hight 2000mm under power
used
Key data: 3000 mm, 1800 mm, 1600 mm
Inv. Num. : 7037 Type: OPTIMA Producer: TOS Created: 2005 Parameters: Duty cycle: 83171 h Hours: 36486 h Work table length: 2500 mm Work table width: 1800 mm X-axis travel: 3000 mm Y-axis travel: 1800 mm Z-axis travel: 1600 mm
used
Carousel lathe - Single column SKIQ 12 CNC Manufacturer: TOSHulin Year: 1989/ GC: 2010 Control Siemens ... Sinumerik 840 D Max. workpiece diameter ... 1500mm Table diameter... 1250mm Max. table load ... 12000kg Max. workpiece height ... 1570mm Axis Z... 1000mm Average of the grinding piece ... 800mm Number of positions in the tool changer ... 15 Face plate diameter ... 1250mm Max. ram stroke ... 1000mm Max. workpiece weight ... 8000kg Rapid traverse ... 8000m/min Total Power Requirement ... 63kVA Main engine power ... 40kW Machine weight... 22000kg The machine is in good condition, possible to test under electricity.
used
Inv. Num. : 6079 Type: FSQ 80 CNC Producer: TOS Created: 1990 Parameters: Control system: NS 720 Work table length: 3000 mm Work table width: 800 mm Maximum table load (uniform): 1000 kg X-axis travel: 3000 mm Y-axis travel: 1000 mm Z-axis travel: 1000 mm Total power requirement: 40 kW Spindle speed: 2500 1/min Machine height: 3400 mm Machine length: 7770 mm Machine width: 4360 mm Equipment: Tool Holder
used
CNC table drill TOS WHN 13 with quill Built in 1991 Control FAGOR 8055 Travel xyzw 3500/1850/1330/600 mm Table size 1800 x1800 mm. Machine immediately available and available. Dismantling and loading onto suitable trucks is cost-effective. Installation and commissioning on request.
used
core boring: 70-560 mm bore depth: 20000 mm drilling diameter: 70-500 mm core boring capacity in St 60 - reboring: special: 560-1000 mm workpiece diameter: 3200 mm workpiece weight: 200 t faceplate diameter: 2900 mm speed of boring spindle:: 100 - 500 U/min feed range: 3 - 2000 mm/min boring spindle drive: 55 kW spindle head drive: 150 kW workpiece turning speeds: 230 U/min control: Fanuc total power requirement: - kW weight of the machine ca.: - t 2010 Retrofitted equipped with: - Fanuc Control - 4-Jaw Chuck - Oil Pressure Head - Boring Head - Drill Head - 2-Point Rollers Steady Rest (4) - 3 Point Steady Rest (2) - Bar Rest (2) - Coolant & Coolant Piping - Chip Conveyor - Honing Oil Tank & Honing Tool Bars The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Drill press, bench drill, column drill, pillar drill -Manufacturer: TOS, high-performance column drilling machine type 40 TF / C -Motor: MEZ 2.2 kW -Speeds: 56 - 2240 rpm -Table size: 400 x 315 mm, travel 600 mm -spindle taper: MK4 -Spindle stroke: 165 mm -Projection: 290 mm -Pillar Ø: 140 mm -Dimensions: 1200/650 / H1990 mm -Weight: 602 kg