tos fo used for sale

Working spindle diameter: 75mm Table clamping surface: 950x950mm Digital measuring X-axis travel 1,250 mm Y-axis travel 900 mm Z-axis travel 1,060 mm Spindle speed 18 - 1800 /min. Spindle extension (W) 560 mm Power of the main electric motor 11 kW Max. table load 3,000 kg Dimensions LxWxH 4500 x 3400 x2800 mm Machine weight 10t Inspection possible upon agreement. Accessories: support column

Machine weight: 38000 kg Working spindle diameter: 130 mm Spindle taper: ISO 50 Spindle speed: 1800 rpm Table clamping surface: 1800 x 1600 mm Transverse table movement - x axis: 3500 mm Longitudinal table movement - z axis: 2000 mm Vertical table movement - y axis: 2500 mm

The machine is in good technical condition. Table working area: 950 x 950 mm Maximum table load: 3000 kg Maximum tool speed: 1800 rpm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Spindle extension W: 560 mm Po by prior arrangement, the possibility of a tour in progress.

Clamping surface of the table: 2500x1800 mm Longitudinal movement of the table - x-axis: 3000 mm Transverse table movement - y axis: 1800 mm Vertical movement of the table - z axis: 1600 mm Spindle speed: 6000 rpm Chip conveyor:: Yes Internal cooling: : Yes Number of spindles:: 1

The machine is in good technical condition, control system HEIDENHAIN 310. With circular interpolation. A tour is possible upon agreement. Basic parameters 100 mm; 1000 x 1120 mm Machine weight: 13400 kg Total power of the machine:: 20 kW Diameter of the working spindle: 100 mm Spindle taper: ISO 50 Spindle speed: 4 - 1400 rpm Table clamping surface: 1000 x 1120 mm

Weight of the machine: 32000 kg Total power of the machine:: 37 kW Working spindle diameter: 130 mm Cross table movement - x axis: 2000 mm Vertical table movement - y axis: 2500 mm Machine dimensions LxWxH: 7480x6300x4800 mm

The WHN 13.8B CNC boring machine is in good technical condition, HEIDENHAIN control system. The year of GO 2001 Total machine input:: 37 kW Working spindle diameter: 130 mm Spindle taper: ISO 50 Spindle speed: 2500 rpm Clamping surface of the table: 1800x2200 mm Transverse movement of the table - x-axis: 3500 mm Longitudinal movement of the table - z axis: 1200 mm Vertical table movement - y axis: 2500 mm

WH 105 CNC with Heidenhain iTNC 530 control system is in good technical condition. By agreement, it is possible to see it in operation. AME brand belt filter system with PS50 belt filter attachment, belt skimmer with conveyor belt, micro aerator type 300, lifting system, pump for feeding the machine, external cooling 3 bar, 40 l/min and internal cooling 20 bar with container for coolant 1000 l. Standard chip conveyor for x 1800mm with stepped grate from AME. Spindle speed: max 3300 rpm Transverse movement of the table - x-axis: 1800 mm Longitudinal movement of the table - z axis: 1250 mm Vertical table movement - y axis: 1600 mm Turntable: : 1400x1600 mm B: 360°

Year of Manufacture/SO/GO: 1987/-/2001 Description: The machine is in very good technical condition, dismantled, stored in storage. 5 persons X (table lift) 5000 mm Y (vertical lift of headstock) 2000 mm Z (longitudinal displacement of the column) 1250 mm W (spindle travel) 800 mm Engine power: 37 kW Spindle speed range: 1.25-900 rpm Rapid feed: 4000 mm/min Spindle diameter: 130 mm Table: 1800 x 1800 mm Machine weight: 12000 kg Spindle taper: ISO 50. control system HEIDENHAIN

The machine is in good technical condition, testing possible upon agreement. Including accessories: shaiba and 2x lunette, 1x 400 universal three and 1x four paknovka, 1x 500 universal three and 1x four paknovka. Technical parameters : circulating diameter above the bed 800 mm circulating diameter above support 495 mm spike distance 2000 mm spindle bore 70 mm cone in spindle 1:20 M 80 bed width 700 mm engine power 17/10 kW floor plan area of ​​the machine w x d 1845 x 4675 mm machine weight 6000 kg

Inv. number: 108183 Type: SV 18R/1250 Parameters: 380 mm, 1250 mm Manufacturer: Thos Year of Manufacture/SO/GO: 1962/-/- Location: Czech Republic Description: The machine is in good technical condition, it is possible to inspect it in operation by agreement. Accessories: 4 x 160 flange, 1 x 200 flange, 2 x chuck, face plate, drive plate, knife clamp, fixed + movable bezel, jaws, chuck cover and more. Circulating diameter above the bed: 380mm Distance between spikes: 1250mm Circulating diameter above the support: 215 mm Power of the main electric motor: 6 kW LxWxH: 3020x950x1210 mm Machine weight: 1910 kg.

total machine input: 6.5 kW - main spindle motor - power: 7.2 kW MAXIMUM DIMENSIONS OF THE WORKPIECE: - rotating length: 1250 mm - diameter on the bed: 380 mm - diameter above the support: 215 mm - weight: 250 kg spindle: - inner cone: SK50 - maximum speed: 2800 rpm - chuck diameter: 250 mm MACHINE DIMENSIONS: - weight: 1.9 tons - height: 1210 mm - width: 950 mm - length: 3020 mm Machine in good technical condition , by agreement the possibility of a trial.

Point lathe SN 55 / 4000 in good technical condition, including lunette. Total machine input:: 7.5 kW Circulating diameter above the bed: 550 mm Revolving diameter above support: 310 mm Distance between spikes: 4000 mm Spindle drilling: 71 mm Spindle speed - range: 90-1000 Working feed - number of steps: 16 Working feed - range: 38 mm/min

Total machine input:: 83 kW Clamping plate diameter: 2400 mm Max. workpiece diameter: 2600 mm Max. workpiece height: 1600 mm Max. workpiece weight: 15000 kg

Year of manufacture/SO/GO: 1988/-/2000 Table clamping dimensions - width x length 400x1400mm Maximum workpiece weight 800kg Working stroke - longitudinal, transverse, vertical 1000x400x400mm Conical cavity in the spindle ISO 150 Range of revolutions in the spindle - 18 degrees - manual 35-1800rpm-1 Working feeds - 16 degrees - longitudinal 10-1800mm.min-1 - transverse 10-1800mm.min-1 - vertical 2.5-450mm.min-1 Longitudinal rapid traverse 4000mm.min-1 - transverse 4000mm.min-1 - vertical 1000mm.min-1 Spindle electric motor - power 7.5kW Dimensions LxWxH 3180x3310x2400mm Weight including switchboard 4400kg.

The machine is in good technical condition, testing possible upon agreement. Revolving diameter mm 160 Center distance mm 250 Grinding wheel: diameter x hole x width mm 250 x 76 x 20 The largest width of the grinding wheel mm 40 Cone of the working spindle Morse 3 Cone in the tip socket of the tailstock Morse 2 Diameter of the three-jaw chuck mm 80 Rotation of the grinding spindle number of degrees 60 Rotation of the working spindle number of degrees 90 Rotation of the table on both sides number of degrees 10 Speed ​​of the grinding spindle min - 1 2420.3290 The largest longitudinal movement of the table mm 290 The smallest longitudinal movement of the table mm 1 Transverse movement of the grinding spindle mm 100 Quick adjustment of the grinding spindle mm 16 Total machine power kW 2.5 Maximum weight of the workpiece kg 10 Floor plan of the machine: length x width mm 1900 x 1100 Weig ...

The machine is in good technical condition, after prior agreement the possibility of testing. Longitudinal table movement - axis x 1000 mm Transverse table movement - z axis 320 mm Vertical table movement - y axis 350 mm Grinding spindle speed 2280, 2600 rpm Max. workpiece weight 280 kg machine weight 3200 kg

The machine is in good technical condition, it is possible to test it by agreement. Max. grinding diameter: 280 mm Max. grinding length: 630 mm Max. workpiece weight: 65 kg Longitudinal feed: 760 mm Power of the main electric motor: 4 kW Dimensions lxw: 2800x1600 mm Machine weight: 2250 kg. cooling, magnetic separator, dresser holder in tailpiece, 2 x flange with disc, balance mandrel, closed and open bezels are from another machine and must be adapted, internal grinding with fortune, mandrels for internal grinding, protective covers against cooling emulsion, replaced hydraulic oil, hydraulic circuit fully functional without oil leakage, mechanical condition very good, no play on the working headstock, the distributor is outside the machine.

The machine is in good technical condition, after prior agreement the possibility of testing. Max. grinding length 1,000 mm Max. height of ground object with new discs (from the table) 350 mm Longitudinal table movement 1,060 mm Transverse table movement 350 mm Vertical movement of the grinding headstock 400 mm Distance of the spindle axis from the table clamping surface min. 75 mm, max. 475 mm Vertical cutting feed - 1 scale division 0.001 mm Grinding wheel (ø x width x hole ø) 250 x 25 x 76 mm Grinding wheel speed ø 250 mm 2,522 min-1 Partially worn grinding wheel speed 3 319 min-1 Grinding headstock motor power 3 kW Machine dimensions Machine floor area approx. 4,100 x 2,000 mm Machine height 2,125 mm Machine weight 3,400 kg Electrical equipment Total machine power 9.3 kVA Accessories Magnetic clamping plate 300 x 1,000 mm , height 100 mm

Inv. Num. : 5851 Type: IS 280 GS Producer: TOSHIBA Created: 1996 Parameters: Operating hours: 24,593 h Total number of injections: 7,410,962 Clamping force: 2774 kN Screw diameter: 60 mm Injection capacity: 930 cc Injection mass: 855 g Min. height of the clamping plate: 900 mm Min. width of clamping plate: 900 mm Distance between uprights (horizontal): 610 mm Distance between uprights (vertical): 610 mm Ejection force: 152 kN Ejector stroke length: 760 mm Maximum Spray Pressure: 192 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1900 mm Machine height: 1900 mm Injection weight: 12400 kg

The machine is in good technical condition. Spindle bore: 80 mm Taper: Morse 5 Equipment: Own crane Digital measurement 1000 x 500 console It was used once a year for light drilling or milling. By prior arrangement, the possibility of a tour in progress.

Year of Manufacture/SO/GO: -/-/2004 The machine is in good technical condition. Circulating diameter: 280 mm Spike distance: 630 mm Spike height: 140 mm Grinding length: 630 mm Maximum workpiece weight: 65 kg Power consumption of the grinding spindle: 4 kW Total power: 10 kVA Grinding methods: manual grinding, automatic cycle Grinding programs: slot, longitudinal, face, internal Grooming programs: manual grooming, automatic grooming Control system: CNC control system based on an industrial PC Measuring system: tilting device for measuring the workpiece diameter with automatic corrections Nebula extraction Complete technical documentation of the CZ machine Instructions for using the CNC control system CZ Machine height: 1600 mm Machine length: 3750 mm Machine width: 2300 mm Machine weight: 3000 hp By prior arrangement, the possibility of a tour in progress.

Offer 24009 Specifications: - Center height 200 mm - Center width 1500 mm - Maximum circulation – Ø above bed 400 mm - over face carriage 210 mm - Spindle bore 56 mm - Pick-up cone of the tailstock quill MK 5 - Tailstock quill travel 150 mm - Spindle speeds 11 - 2240 rpm - Feeds longitudinal + flat - Metric thread pitches -Thread - Module thread - Diametrically pitsch thread - Drive 400 V / 7.5 kW - 3 jaw chuck - Space requirement approx. W 3300 x H 1600 x D 1200 mm - Weight approx. 2800 kg

Key data: 1000 mm, 300 mm

Max. grinding length 1000 mm Max. grinding width 320 mm Max. workpiece height 350 mm Main motor power 4 kW Total power requirement 6.8 kVA Machine dimensions L x W x H 4100 x 1750 x 2125 mm Tech. condition - very goes, very little in use Machine weight 3200 kg

Machine in good technical condition, possibility of testing after agreement. Weight: 12000 kg Control: TNC 360. X axis (longitudinal) 1250 mm Y-axis (pricna) 1000 mm Z axis (vertical) 900 mm Table length 1000 mm Table width 1120 mm Workpiece weight 3000 kg Spindle diameter 90 mm Max. shaft speed 1120 rpm Shaft motor power 20 kW

turning diameter: 0 mm turning length: 3000 mm swing diameter over bed slide: 710 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Work table dimensions: 1400 x 360 mm Maximum speed of the vertical spindle: 1400 1/min Travel of the X-axis: 1000 mm Travel of the Y-axis: 300 mm Travel of the Z-axis: 420 mm Approx. Onsite Dimension. (l x w x h): 2,000 x 1,900 x 2,300 mm, weight approx.: 2,760 kg

Cylindrical grinding machine BU 28/630 with accessories

Cylindrical grinder BU 28/1000 with accessories

Cylindrical grinder 2Ud/700 with accessories.

Surface grinder BPH 320A/1000

Centerless grinding machine BB 6

Center Height : 150 mm Max. Job Diameter : 290 mm Max. Job Length : 1000 mm Grinding Wheel Size : Diameter 400 mm x 50 mm Width Work-Head Speeds : 22.4 rpm to 710 rpm Wheel-Head Speed : 2050 rpm

Used DAL TOSO Filling Machine up to 4500 Lt h Introduction to the Filling Machine DAL TOSO The used DAL TOSO filling machine constructed in 2011 emerges as a perfectly reliable option for bottling operations Boasting a nominal speed of approximately 4500 liters per hour this system therefore proffers consistent performance and unparalleled versatility for an array of products Description of the Machinery The machinery comprises a filler with 20 taps each outfitted with a 22 mm diameter straw Furthermore all components in direct contact with the liquid are meticulously crafted from stainless steel 316 thereby ensuring maximum hygiene and resilience against corrosion A dedicated pump efficiently channels liquid to the filler while the inclusion of false bottles facilitates the thorough cleansing of taps The bell adjustable in height via electric drive confers adaptability in accommodating  ...

spindle diameter: 63 mm taper MK: 5 facing slide: ja digital: ja : ja weight of the machine ca.: 7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 350 mm weight of the machine ca.: 50 KG tool adaptor: MK5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Furnishing: - 3-axis digital display - Rapid traverse - Coolant system - Good condition x-travel 500 mm y-travel 400 mm z-travel 320 mm Speed 40 - 2000 rpm Spindle holder 40 SK Quill stroke 50 mm Table: 700 x 300 mm Total power requirement 4.5 kW Weight 1.3kg Space requirement approx. 1.5 x 1.2 x 1.95 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 1,200 x 1,950 mm, weight approx.: 1,300 kg

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mm x-travel: 1600 mm y-travel: 1120 mm z-axis: 1250 mm : 900 mm : 1.250 x 1.250 mm : 360 ° turning speeds: 7,1 - 1.120 U/min table load: 3,0 t : 50 : 2,8 m/min feed: 18- 900 mm/min power capacity - milling spindle: 11 kW transmission ratio: 23 max. torque on the spindle: 3.350 Nm faceplate: Ø 600 mm radial face slide travel: 215 mm faceplate turning speed range: 7,1 - 224 U/min total power requirement: 15 kVA : 14 t range L-W-H: 6,0 x 2,6 x 3,0 m conv. hori. borer in good condition with facing plate - facing plate - 3 axis digital scale - turning table - table support - coolant system - some equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter:250 mm grinding length:630 mm centre height:125 mm control:Siemens S7 swing diameter:280 mm centre distance:630 mm grinding head swivelling:90 ° table swivelabel +/-:+10/-7 ° grinding wheel dia. x width x bore:400 x 40 x 127 mm grinding wheel dia. according abrasion:250 mm max. grinding wheel width:63 mm swing in open rest:70 mm swing in closed rest:70 mm taper bore of workpiece spindle:4 Morse taper of tailstock quill:4 Morse stroke tailstock centers:30 mm clamping force tailstock center:50-1500 s grinding head swivellable +/-:+15/-45 ° output of wheelhead motor:4 kW work piece motor:0,7 hydraulic motor:1,1 kW cool pump motor:0,155 kW lubrication pump motor:0,155 kW electro motor internal grinding:0,75 kW total power requirement:10 kVA weight of the machine ca.:3000 kg dimensions of the machine ca.:L3000/B2300/H1600 mm stepless spindle speed:und Werkstückantrieb M ...

x-travel:800 mm y-travel:630 mm z-travel:500 mm feed stepless:1-7500 mm/min rapid traverse feeds:7500 mm/min tool cone:40 ISO spindle drive motor:10 kW turning speed range - spindle:20-4000 U/min Torque of spindles:630 Nm total connected load:25 kW weight of the machine ca.:5 t dimensions of the machine ca.:15 qm 100 % before loading warranty: none The machine is in very good condition (only one prior owner), only few operating hours. Machine was installed first time and equipped with CNC Heidenhain TNC 355 in 1996. Other optional accessories can be delivered. Price basis: ex stock, free on truck time of delivery: immediatly, prior sales reserved payment:100% before loading warranty: none techn. documentation: as available.

grinding diameter:750 mm grinding length:2000 mm centre height:375 mm grinding wheel size:750x100x305 mm :40-250 mm tailstock-quill conus:Morse 6 table swivable ca.:4° (1:8) turning speed range - workpiece spindle:(stufenlos) 1-50 U/min grinding wheel speed:20-33 m/sec grinding wheel motor:19 kW total power requirement:ca. 41 kW

x-travel:600 mm y-travel:500 mm z-travel:400 mm spindle diameter:90 mm spindle turning speed range:45 - 2000 U/min table length:1250 mm table width:200 mm groove width:14 mm table rotating:45 ° total power requirement:4,2 kW weight of the machine ca.:2000 kg dimensions of the machine ca.:2000 x 1800 x 1550 mm Year:ca.1957 Documents:vorhanden

table length:2200 mm table width:2500 mm table load:16 t total power requirement:6,5 kW feed speeds:1,25 - 160 mm/min rapid traverse speed:2000 mm/min longitudinal adjustment:1500 mm weight of the machine ca.:12 t dimensions of the machine ca.:4,1 x 2,65 x 0,95 m

PC system from former POS workstation TOSHIBA 4818-T10, S/N QCQW00085001EH, Intel Celeron J1900, 4 GB RAM, 256 GB SSD, without software, Not suitable and/or intended for use within the meaning of § 146 AO, 1x mouse and keyboard, 1x barcode scanner DATALOGIC HD3130, 1x receipt printer TOSHIBA TRST-A10-SC1-QM-R

for sale wood fired coffee roaster , machine dated but excellent condition as new working , manufacturer OFFICINE ELETTRO MECCANICHE , BOLOGNA as is visible the nameplate opposite the machine , unfortunately I can not add more information because I am not an expert on such machines , the machine is located in Italy and precisimante in Lucca Tuscany , and possible to make any inspection for viewing

The scope of delivery includes: 01x Folding box / folding box, used Manufacturer: SSI Schaefer Type designation: FK 6220 Material color: blue External dimensions: 600 x 400 x 220 mm (LxWxH) Internal dimensions: 570 x 370 x 215 mm (LxWxH) Dimensions folded: 600 x 400 x 70 mm (LxWxH) Volume: 45 l Weight: 2.44 kg/pcs. Material: Polypropylene Handles: open on the front wall side Side Type: Closed Bottom Finish: Smooth, Closed It is a second-hand item, there may be scratches, dents and traces of use exist. General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery.

Case erector APE model Form 1200 Year: 1998 Speed: 900 c/h Gluer Mesa Included conveyor

Carton forming machine APE mod. FORM 1200 BB Machine for bag in box Speed: 900 c/h Year: 2001 Hot melt closing box. Safety protections.

Box forming machine APE – FORM 1200 HM Year: 1996 Speed: 900 C/H Gluer NORDSON Safety protections.