tos fo used for sale

Max. bending length: 2540 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail ground Weight: 3400 kg

Injection moulding machine for food and beverages caps

Continuously motion folding box cartoner with automatic blister infeed. Mechanical output up to max. 300 cycles/min. TThe unit is fitted with: blister infeed, GUK Leaflet folder, coding device, Reject station, vacuum pump. PLC: SIEMENS Type: Simatic S7-300

Injection moulding machine for food and beverages caps

Key data: 6000 mm

Hydr. Long bending machine with roller shears

- Feeder - Digital control - 4 pockets - Perforating modul - Mobile delivery

BIG pallet fork Volvo BM mount 2000 mm, - FEM 3, - Load capacity up to 4 t, - 2000 wide

Format range: max. 940 mm, min. 50 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluing unit HHS X-pect, 8 channel with 3 application heads, disc underglue unit left, Pre-crusher right and left, kicker, counter, vibrator on the feeder, digital Position indicators, threading station, lower center feed in folding, pneumatic, intermittent press belt, cleaned, tested.

Uhlmann C 100 horizontal cartoning machine Modified 2025 - Fully automatic blister strip packaging and simultaneous feeding of package inserts - Max. output 120 FS/min / depending on product Format: L= 70 x 150mm W= 30 x 100mm H= 15 x 85mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel mechanically overhauled Accessories optional: - GUK brochure folder 4-fold folding - Cognex 1D barcode and 2D matrix code reading system for leaflet and folding carton code - Luminizens control, presence control for package inserts in folding cartons - Embossing station - Brochure insertion - Vacuum pump or Venturi nozzle

Doka Folding console K Console for producing a folding platform 52.40 kg Price: EUR 186,25 per piece

Key data: 4

Technical data/equipment: 4 planing shafts Voltage 380 V/ 50 Hz Power consumption 20 kW Weight approx. 1500 kg More dates to follow The sale is carried out on behalf of the owner, in the condition as it is, excl. Warranty.

Key data: 1000 mm, 18 kN

TC120Bj. 1992 against highest bid Partially overhauled with tools Working area y1000 x2000 with resetting Bosch control with graphics programming Tool Changer 9Stations /2Paws Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service

Key data: 1300 mm, 22 kN

TC500Bj. 1995 against highest bid Partially overhauled with tools Working area y1300 x2500 with resetting Bosch control with graphics programming Tool Changer 20Stations /3Paws Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service

Large working width: 3060 mm for sheet metal (at 40 kg strength) up to: 4 mm Kl. Bending radius: sheet thickness x 1.25 Kl. Inboard height: sheet thickness x 6 Opening width of the upper beam: 220 mm Adjustability of the lower/bending beam: 90 mm Max. bending angle: 180° Lifting speed down/up: 40/60 mm/s Hydraulic drive: 380 V, 7.5 kW Weight: 4.3 t Space requirement: 4150 x 1800 x 2500 mm

Auto. Film wrapping system Auto. Film wrapping system Pallets – Turntable Pallet Turntable Drive-on ramp Access Ramp Pallet weight max 2 t Weight of pallets max.

Key data: 1500 mm, 22 kN

TC500 Bj.1999 Partially overhauled with tools Working area y1600 x3000 Bosch control with graphics programming Tool changer 21 stations (with multi-tool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service

Key data: 1500 mm, 22 kN

TC500 Bj.1998 Partially overhauled with tools Working area y1600 x3000 Bosch control with graphics programming Tool changer 21 stations (with multi-tool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service

Folding nut for die casting machine, TR330x10, 931375, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Folding nut, Tr330x10, 2 pieces 550x220x220mm high. Approx. 270kg, 931375, The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Product Features: The KaFe manual Penal Bender(Bending center) is a next-generation, fully automatic multilateral bending center, offering high precision and efficiency. It represents a benchmark for automated production in the sheet metal manufacturing industry. It significantly reduces labor costs and boasts a bending speed three times that of CNC press brakes, reaching 0.5 seconds per turn. Full servo control ensures product accuracy within 3 seconds. Product Function: The kaFe Manual Penal Bender (Bending center) can bend sheet metal into various complex shapes without the need for molds. Equipped with a pure electric servo system, it replaces hydraulic drive and offers environmentally friendly, high-speed, high-precision, and maintenance-free features. This high-tech product was developed and manufactured to improve production efficiency, reduce labor intensity, and enhance cor ...

Key data: 6020 mm, 1 mm

With hydr. Roller shears SM 1.5 and depth stop (4 stop fingers). with emergency stop rail, slide-back sheet metal supports and control on the swivel arm, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 6020 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.80 mm Back gauge: 1000 mm Colour: blue Total power requirement: 16 A Dimensions: 6810 x 1580 x 1870 mm Insertion depth: 1000 mm Machine weight: 3000 kg Upper beam stroke: 200 mm Roller shears motorized Number of stands: 5 pieces Opening width: 200 mm Bending angle: 140 degrees Back gauge: 25 mm Machine number: 9888-10

Heidelberg Stahlfolder Ti 52 4/4-f152.1 Folding Machine This folding machine is in excellent technical and visual condition and is fully operational. Technical Details: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High-capacity stack feeding Four cassettes on the first module (Ti-52) Four cassettes on the second module (Ti-52) Inverter-controlled, precise folding adjustments Noise reduction Double sheet detection sensor Electronic batching counter Electric-powered delivery with adjustable speed settings Comes with spare parts and tools for maintenance This machine is ready for immediate use form our warehouse in 67269 Gruenstadt, Germany

- Maximum panel format 2080 x 1600 mm, min. plate format 655 x 410 mm - 128 laser diodes, blue laser 405nm for UV light sensitive analog standard plates - Resolution 2,400 dpi - Optionally with automatic plate feeder PHS system with 5 cassettes at call Price from location on request

Folding Machine Steel T 36 Year of manufacture: 1985 Flat Pile Feeder Folding Type: 4 buckles - 4 buckles Size: min. 80 x 100 mm - max. 360 x 650 mm Paper weight: 40 - 250 g/m² Pile height: max. 580 mm Speed: min. 10 m/min. - max. 160 m/min. Diameter of folding rollers: 32 mm Delivery: Stream delivery Compressor included immediately available from our warehouse in Germany

Pastry machine Kalmeijer KGM with heating system, Sheet metal transport with "stop and go" & 1 figure roller "Speculoos" Machine mobile Connection 400V,16A-CEE plug Dimensions: 560 x 570 x 1230 mm, WxDxH Used machine cleaned Quality from a specialist company! Benefit from over 35 years of experience! Other Figure Rollers Baking tins Maintenance contract Delivery E-Box for more safety Instruction & Commissioning

Weinig Hydromat 23C four-sided planer Working width 230mm Working height 160mm Number of spindles 7 Spindle layout: 1.Down 15kw 2.7.5kw rights 3.Left 7.5kw 4.Top 15kw 5.Lower 30kw (multi-saw) 6.Lower 7.5kw (hydro support) 7.Upper 7.5kw (hydro support) Spindle speed 6000r.p.m Spindle Diameter 50mm 4 pulling rollers in the working table Inverter-adjustable feed speed up to 36m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation

Weinig Profimat 22N four-sided planer Working width 220mm Working height 120mm Number of spindles 6 Spindle layout: Lower 4kw Rights Left 5.5kw Upper 5.5kw Lower 4kw Universal 4 Feed speed adjustable by variator 6-22m/min 3kw feed motor power Adjustable spindles

Key data: 1250 mm, 1 mm

with the following equipment: segmented with quick-clamping system Segment height: 100 mm Division of the segments: 8 x 100 mm 1 x 30/40/50/60/70 mm 1 x right corner 100 mm 1 x corner left 100 mm with engraved measurement numbers in upper and bending beam segments incl. wheels Extras: with window sill insert for the production of head edges, segment height 100mm with depth stop with T-slot rail Working length: 1250 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.80 mm Colour: blue Dimensions: 1730 x 740 x 1180 mm Machine weight: 290 kg without roller scissors Opening width: 90 mm Bending angle (max.: 150 mm Machine number: UK 20361

GENERAL DESCRIPTION: The Macchi 3-Layers E18 is a high-capacity blown film co-extrusion line intended for production of general-purpose films with high width and output demands. It processes LLDPE, LDPE, mLLDPE, MDPE, HDPE, and in upgrade configuration also PP. The system uses a 700 mm 3-layer die head and reaches an output capacity of up to 900 kg/hour, depending on formulation. EXTRUSION GROUP: • Extruders: 80 mm + 100 mm + 80 mm • Infrared heating • Hydraulic screen changers Detailed upgrade specification: • One extruder Plastex 100/30D (middle layer B) • Two extruders Plastex 80/30D (layers A and C) • Bimetallic barrels • Nitrided screws • Water-cooled grooved feeding sections • 5 heating zones with IR heaters and blowers •Engine: - 150 kW DC motor (100 mm extruder) - 100 kW DC motors (80 mm extruders) • AC motor application with digital control  ...

Lift height: 3680mm, free lift: 160mm, load capacity: 5000kg, load center: 500mm, sideshift carriage: 1310mm, sideshift: +/-100mm, fork length: 1600mm, cross section: 130mm/60mm, battery weight: approx. 2200kg. Machine dimensions Y/Z: approx. 1400mm/3700mm, operating hours: approx. 3416h. Documentation available. An inspection on site is possible.

weight max. in kg: kg stroke: mm fork length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Manual backgauge with spring fingers Weight: approx. 2300 kg

A foam bag system for packaging smaller and individually manufactured parts is available. Packaging capacity: 16 bags/min, film type: perforated, bag dimensions 1 X/Y: 470mm/400mm, bag dimensions 2 X/Y: 470mm/600mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/700mm, weight: approx. 30kg, control: Instapak 901. Includes two component filler, spare parts, and foil bags. Documentation vorhanden. An on-site inspection is possible.

PAPER CUP FORMING MACHINE SINGLE WALL 12 oz (90mm TOP DIAMETER) IN AN EXCELLENT AND WORKING CONDITION VERY LITTLE HOURS OF OPERATION .

Key data: 6400 mm, 1 mm

used Jorns double bending machine, with the following equipment: - 4 pneum. Clamping finger with short-part clamping finger - Attachment rail - Foot control - Sheet metal cassettes - Upper beam with rebate groove - Hydr. Material thickness adjustment - Clamp and angle stop (Matic) Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6400 mm Sheet thickness max. steel 1.5 mm Sheet thickness max. aluminium 2.0 mm Sheet thickness max. VA 1.0 mm Back gauge (min.) 15 mm Back gauge (max.) 1125 mm Colour anthracite/light grey Total power requirement 20 A Dimensions 7332 x 3721 x 2040 mm Weight 9250 kg Upper beam stroke (opening width) 200 mm Bending angle (max.) 145 degrees Crowning manual without roller scissors Number of stands 5 pieces Insertion depth 1150 mm Machine number K13036

Offer 25443 Specifications: - Bear weight 40 kg - Impact regulation - Lifting height infinitely adjustable 200 mm - Impact rate approx. 220 1/min - Projection 280 mm - Anvil - height approx. 560 mm - Anvil - Weight 250 kg - Drive 380 V / 4 kW - Space requirement approx. W 850 x H 1100 x D 1350 mm - Weight approx. 850 kg

- flat pile feeder - 1. Station 4 buckles - 2. Station 4 buckles - standard delivery

Format range: Box length: 80-535 mm Box width: 50-400 mm Equipment: motorized right turn / back dust margin, laser counter, speed infinitely adjustable via potentiometer. Packing scheme: 1–4 rows / layers, results in 16 possibilities. Overhaul 2025: cleaned, checked, painted, new belts. Machine can be viewed by appointment while running.

A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

Max. bending length: 2040 mm Max. sheet thickness: 4 mm steel Max. upper bolster stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via toggle switch Bending rail in top condition Manual backgauge with spring fingers 4000 kg

Specifications Dimensions: 795 x 530 mm Height: 1020 mm El. Connection: 230 V, 50 Hz Description: Removal and placement on the tray is carried out with the help of a carrier integrated into the drawer. When the carrier is lifted out of the drawer, the lye dough pieces are lifted off the leaching grid and can be conveniently placed on a baking tray. There is no possibility for the operating staff to come into contact with the lye at any time! The lye circuit is fed from a swap tank. A suction pipe and a return hose are inserted into the swap body. After about 3000 pretzels, the lye is used up. The caustic solution is changed by simply replugging the suction pipe and drain hose into a new drum. The swap bodies are tightly screwed together and can therefore be safely transported back to the bakery, washed out and refilled. There is therefore no need to change pretzels in the store. ...

sheet width: 2040 mm plate thickness: 4,00 mm distance between columns: mm upper beam stroke: 350 mm total power requirement: kW weight of the machine ca.: ca.4,00 t dimensions of the machine ca.: m Manual and automatic bending sequence possible Bending angle adjustable via potentiometer Upper jaw stroke height and material thickness selectable via DIP switches Bending rail in excellent condition Manual backgauge with spring fingers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mould grinding machine OTT - KG Up to 150 mm wide with Stepless Transport Carpet Profile strip and semi-round mouldings

Size: 520 mm Equipments: 4 bags, 1st work 4 pockets 2nd work X Kreuzbruch Unit Flat stack investors

MBO K820-4KZ Year 1994/1995 Minimum size 150 x 210 mm Maximum size: 820 x 1200 mm Feeder MBO F820 Flatpile feeder - with MBO Vaculift sheet seperation head and MBO Vacubelt suction belt Folding configuration 4 platebuckles + 2 knives with exit to left or right Delivery MBO SBAP 46 pressing & upright delivery Details Vacuum pump, noise hoods, batch counter

⚙ 🔧 In this package you will find multi-purpose waling WU12 Top50 in various lengths 🚧 The walings have the same function as the multi-purpose walings WS10 Top50. Due to the larger profile dimension, they are suitable for higher loads. The hole pattern is identical to that of the multi-purpose walings WS10 Top50 - they are used to transfer the load and give the formwork element stability and rigidity. Depending on the requirements, the support can be attached to the steel wall bar using different fastening devices. 💡 The multi-purpose walings are bundled on support wood. If required, we will also be happy to take care of the delivery 🚛 or you can simply pick up your multi-purpose walings yourself from the Form-on warehouse. Price: from € 41,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sa ...

Weinig Hydromat 23 four-sided planer 60m/min Working width 230mm Working height 160mm Number of spindles 5 Spindle layout: 1.Lower 15kw 2.11kw rights 3.Left 11kw 4.Upper 15kw 5.Lower 7.5kw Spindle speed 6000r.p.m Spindle Diameter 50mm 3 pulling rollers in the working table Inverter-adjustable feed speed up to 60m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation Machine dimensions 300x180x170cmH Weight 3500kg Net price 130.000PLN

This SiteLight 2G package includes a complete set of 96 new, previously unused LED mesh modules , including packaging. The modules originate from a uniform SiteLight setup and are based on the 2G generation with LED mesh technology. They were originally designed for use as a media façade and construction site communication solution †for example when mounted on façades, scaffold tubes, or high-rise formwork in combination with protection screens such as Xbright. This makes them particularly suitable for projects that require large-scale LED surfaces on buildings or construction sites. 💡   The modules have not been individually tested prior to sale and are therefore offered as untested stock . This means that the modules may work, but this cannot be guaranteed . No statement is made regarding the actual functionality of individual panels. 🔍 Deliver ...

🏗️ More height? More possibilities †with MANTO 3.30 m!   Need formwork for extra-tall wall heights ? Then the  Hünnebeck MANTO at 3.30 m height is exactly what you need! 💪 The MANTO 3.30 m is part of Hünnebeck’s well-established wall formwork system †robust, efficient, and highly flexible. Thanks to its hot-dip galvanized steel frames , it’s made to withstand the toughest site conditions †durable and reliable all the way. 💡   🚧 Perfect for crane-assisted projects: With this height, you can form large surfaces even faster and more cost-effectively . Whether used horizontally or vertically , the panels can be combined freely †giving you maximum flexibility on site. 🔁   And as always: 📦 Accessories? Of course! Our warehouse is stocked with a wide range of matchi ...

Framax Panel 1.35 m †Small but Powerful! ⚡🔩 Small but mighty! The Framax Panel 1.35 m combines stability, efficiency, and durability †perfect for any formwork task. 🚀 Your advantages at a glance: 🔹 Strong & durable: Galvanized and powder-coated steel frame stands up to the toughest demands. 🔹 Quick assembly: Smart locking system and continuous rib make setup fast and easy. 🏗️ 🔹 Extra robust: Xlife Framax panel, rear-fastened, for maximum strength. 🛠 🔹 Crane-friendly: Form large surfaces effortlessly †no extra effort required! 🎯 Small in size, big in impact! 💥 Get your Framax Panel 1.35 m now at Form-on ! 🛒 Price: from € 153,00 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned conditi ...

🛒 Dokamatic table grille in individual parts | ½ truckload or 40 container Our offer on the Form-on Marketplace is as individual as your requirements! ✨ And this is what you get: individual parts for 24 pcs. Dokamatic table grille 2.00x4.00m maximum optimization of transport costs thanks to space-saving loading the required returnable container is already included in the total price 🚚 Now theres just one question: Whats the quickest way to get your table grills? If required, we will be happy to ask for you about the transportation costs incurred or you can simply and easily collect your material yourself. Price: from € 8920,00 / Gesamtpaket (excl. VAT).Price valid: per total quantity Partial quantity: not possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Use ...