126,715 used machines on RESALE, but how to find them? Machine Search
Key data: 4 mm, 80 , 20
Heavy Duty Four-Sided Planer Still in operation until the end of July 2024! Detailed technical description in the PDF document (attached in the photo gallery).
Perkins diesel engine; 4 cylinder Auction-ID: A1-43429-212
Hydraulically driven. In good working condition. Auction-ID: A3-43520-6042
New cascade FEM 3 Side shift Auction-ID: A3-43519-265
Hydraulically driven. In good working condition. Auction-ID: A3-43520-6038
Key data: 5 , 230 mm, 130 mm
I sell the Weinig Unimat 300 four-sided planer, built in 2004 Feed speed 5-30 m/min. Working width 230mm Working height 130mm 5 Spindle Configuration: bottom - right - left - up - down Combined power 28kW 3-zone pneumatic pressure Good condition. Fully operational! Available soon. Includes full documentation and CE certification.
Bolzoni auramo side shift/fork positioner Auction-ID: A3-43519-194
- Hourly output: up to 2000 cartons - With NORDSON hot melt device - Machine in good condition
Illig RDM75K age 1998, refurbished in 2019, with Siemens S5 PLC Controls, used only for ca. 50,000 hrs ELAU B1 Display with Touchpad controls Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 750 mm Max. Indexing length 480 mm Top & Lower heaters, total connected load top & bottom heaters 111.3 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 700 x 450 mm Hydraulic Cylinder Plug Assist with Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 Max. Part height 150 mm Max. Mold closing force 25,000 daN Auto Lubrication system Siemens S5 PLC Controls New original ILLIG/ RITTAL Control Cabinet Cooling System added in May-2023.
ILLIG PLS75B Inline Counter/ Stacker, with Hole Punch Station, age 2006 used Inline with ILLIG RDM75K ! Max. Stacking Area: 750 x 350 mm Min Height of formed product: 25 mm Max. height of Formed Product: 150 mm Min. dia. of product : Ø 40 mm Max. dia. of Product: Ø 150 mm Max. length of Product Stack: 730 mm Output rate of Product Stacks: 1200 Stacks/ hr Rotating Head to neatly remove Products from the Thermoformer Mold Inline Hole Punch Station Inline Counter Stacker Station Compressed Air: 0.2 L at 6 bar, approximately Total Drive Rating: 19 kW Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE) Cross delivery conveyor for counted cups. All Motors are Indramat Servo Motors Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls Siemens S7 PLC Controls Delivers Counted Cups/ Containers at Right Angles to machine direction New (Feb- ...
Forestry blade 3-point attachment home-made on the basis of a mini excavator blade Auction-ID: A3-43520-36008
Uhlmann C150 Horizontal Cartoning Machine Blister Packing, - Fully automatic blister packaging and simultaneous feeding of package inserts - max. output 150 FS/min - depending on product Folding carton format range: Min.: 30 x 15 x 70 mm, max: 100 x 85 x150 mm Brochure size: Min: 100 x 80 mm, Max. 210 x 300 mm - Operating voltage 400 V .- Connected load: 4 KW - GUK brochure folder 4-fold folding - PCE code reading - Luminizens control, presence control for package inserts in folding boxes - Embossing station - Brochure insertion - Venturi nozzle Mechanically overhauled Optional: - New hardware and software PLC Mitsubishi control and 8 inch color touch panel - Cognex 1D Barcode and 2D Matrix Codes Reading System for Leaflets and folding carton code -Remote maintenance - 10-year spare parts procurement warranty
Fully Automatic Stretch Film Packaging Machine with Scale & Labeler Packing Plant / Wrapper + Labeler DIGI AW-5600e AT POP The AW-5600 AT is a high-performance automatic weighing, packaging and labeling system for ease of use and environmental friendliness. The packaging machine reduces the workload with easy and simplified operation. It saves film and label consumption through linerless labels in order to keep costs and environmental impact low. Goods such as cheese, meat or fruit and vegetables can be packaged easily and in a visually appealing way. Technical specifications Wrapper DIGI AW-5600e AT POP 220-240V / 50-60 Hz / 2.2 kW suitable for Food-Tainer bowls Capacity up to 36 packets/min Film width: 300 - 450 mm Year of construction: 2018 Total weight approx. 450 kg DIGI award system 3 built-in printers for product labels and promotional labels ...
Weight: 0,08 tons Length mm: 1900 Width mm: 550 Height mm: 700 Condition machine : Moderate Photos/film available: Photos available
Pallet feeder – separating head 4 buckles 2 knives Navigator Vaculift Vacubelt A76 belt delivery
Front and rear work lights, flash light, suspension seat Auction-ID: A3-43519-259
4 cylinder, engine runs but not with starter motor Auction-ID: A3-43520-17015
Lippert Belt Conveyor Folding Belt GF 1360-750-600 RA1829 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1270x1180 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S ...
Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1090-650-500 RA1399 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...
New stacker Bluetooth Auction-ID: A3-43519-21343
Fully Automatic Stretch Film Packaging Machine with Scale & Labeler Packing Plant / Wrapper + Labeler Fabbri Group ELIXA 35 / Libra-B.285.ESP Among Elixa automatic stretch wrapping machines, the Elixa 35 is the most powerful model in terms of speed (35 ppm). Like all the machines in the range, the Elixa 35 is a compact stretch packaging machine designed by the Fabbri Group specifically for particularly small workspaces and retail outlets. Elixa 35 can package any food that is compatible with stretch film and technology. Neutral or printed films with continuous printing are used, which offer more possibilities for communication and branding on the package. It delivers the best results when combined with Fabbri Group stretch films, but also offers excellent performance with food films from all major manufacturers on the market, achieving unparalleled packaging aesthetics. ...
Mechanically driven 540 rpm. In good working condition. Auction-ID: A3-43520-6040
FT-1600 Serial Number : FS417148 Trailer 1600kg 2000mmx1250mmx300mm https://foresteel.eu/product/ft-1600-tipping-trailer/ Auction-ID: A3-43520-5009
-Continuous forms Collator Bama -Year 1990 -Six stations -Continuous delivery with speed controls -Crimp lock, Multiflex on both sides -Gears size 8”-11”-12”
large working width: 2040 mm for iron sheets up to approx.: 1 mm Dimensions: 2650 x 650 x 1180 mm Weight: approx. 680 kg
Front and rear work lights, new battery with automatic filling, flash light Auction-ID: A3-43519-266
Paper format: min. 10 x 16 cm // max. 35 x 50 cm Brochure format: min. 8 x 5 cm // max. 35 x 25 cm Equipment / Additional information: Page circumference 80 gr./m2 up to 100 pages Work cycles max. 4000 per hour 4xHohner 48/5 stitching heads Easy adjustment option for head stitching Break-in sword fold with adjustable folding rollers Front cutting unit via upper and lower knives
POLYTYPE BDM 611/ 916, 8-Color Cup Printing Line, age 1999 Consisting of: Elevator Tray Feeder Cross Conveyor feeder Universal screw Denester ARCOTEC CG30 Corona Pretreatment System with Arcotec Leak Tester 8-mandrel Indexing Turret, with Mandrel Holders for Cups UVITERNO Model Mono-Jumbo 8015, 9 kW, UV Curing-On-Mandrel Positive Blow-off, final dual Timing Belt take-off Conveyor to counter Stacker station with Ejector Tray. Max. Cup dia.130 mm Min. Cup dia. 60 mm Max. Height of Cups 150 mm Min. height of cups 35 mm Max. Printing Length : 362 mm Taper 2 - 10 degs Max. speed depending on size & shape of Cups: 36,000/ hr Siemens S5 PLC Controls Siemens CORTOS OP25 display with Touch-pad Controls.
New, compact mini forklift Auction-ID: A3-43519-21344
The tractor is in good condition and working. Auction-ID: A3-43520-34078
Broken down - the reason for the failure is unknown Auction-ID: A3-43519-35599
working condition; tread tires well; can be loaded by seller Auction-ID: A3-43519-10059
ILLIG SZS73 Counter Stacker, age 2007 Effective Working Area: 740 x 340 mm Max. Part Height: 150 mm Formed Part Stacking Length: 800 mm Siemens S7 PLC Controls Siemens SINAMICS Motor Drives Rittal Control Cabinet Cooling Unit with Temperature Display. This ILLIG SZS73 was working Inline with a Generation 3 ILLIG RDM70K Line. With Snap -Stacking Brush Stacking Cascade Stacking The Counter/ Stacker is in v. good production Condition, it is clean and in a very good Optical condition as well
LED work lights, flash light Auction-ID: A3-43519-267
Used POLYTYPE BDM 501, 6-Color Round Cup Printer, age 1994 Consisting of :- Automatic Elevator Tray-feeder Cross Conveyor to main Print unit Universal screw Denester CUBITRON Corona Pretreatment System 8-mandrel Indexing Turret, with Mandrel Holders for Cups 6 x individually hinged dry-offset Print Heads Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer 2 x Form Rubber Rollers dia. 71 and 100 mm 2 x Oscillating rollers 2 x Idler Rollers 1 x Ink Transfer roller (Ductor Roller) 1 x Ink Fountain Ductor Rollers water cooled Ink Washing System on Print Heads UVITERNO Dual Lamp UV Curing-On-Mandrel Dual Belt Take-off with Air Assist Short conveyor to counter Stacker station Return Elevator Tray Feeder Max. Cup dia. 135 mm Max. Height of Cups 130 mm, Min. height of cups 35 mm Max. Printing ...
Specifications: - Max. working width 2520 mm - max. material thickness at 40 kp / mm², strength 3.5 mm - Bending angle adjustment can be preselected - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg
Aluminium Z-conveyor belt incl. substructure Horizontal range 1,200mm (customizable) Rising range 3,000mm (customizable) 2nd horizontal range: 1,200mm (customizable) Angle in the bend 45 degrees each Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable (can be moved) Conveyor belt width 700mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 80x50mm T-65Studs - 150mm 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is currently ap ...
maximum number of results exceeded
please refine your search
1.000 € 
