tos fo used for sale

MBO T 460 folding machine; good condition; cleaned and tested; new folding rollers; new warehouses; new straps; 4 folding pockets; shed display; .max. Format 46x66cm;, min.15x17cm; MS control; knife shafts; Flat stack feeder. Folding machine MBO T 460; good condition; cleaned and checked; new rollers; new bearings; new belts; four pockets; stream delivery; max.size 46x66cm, min.15x17cm; MS counter; slitter shaft rollers; Folding Pile Feeder.

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: 2000 kg -Dimensions: see photos / technical drawing -Dimensions: 2530/1150/H415 mm -Weight: 1070 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: kg -Dimensions: see photos / technical drawing -Dimensions: 2230/1150/H375 mm -Weight: 920 kg

BÖHL JUNIOR S-450 VA fully automatic wrapping machine for all types of long goods Product Dimensions • Width 80 – 220 mm • Height 50 – 100 mm • Length approx. 2,000 mm to 6,000 mm • Weight approx. 30 KG • Maximum cross-sectional diagonal 311 mm Packaging materials • PE stretch film thickness approx. 7 – 50 my (recommended 23 my) • Roll diameter 220 mm • Roll width 250 mm • Sleeve diameter 76 mm Specifications • Winding ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency controlled) • PLC control Siemens S7-200 with touch panel • Control voltage 24 V DC • Connection voltage 3 x 400 V – 50 Hz • Power consumption approx. 2 KW • Back-up fuse 25 A • Noise level 79 db • Operating pressure 6 bar • Air consumption approx. 20 standard litres per cycle Technology • Automatic smooth-cut cut-off unit for th ...

BÖHL JUNIOR S-450 VA fully automatic packaging machine / wrapping machine for spiral wrapping of long goods with packaging material (typical stretch film) Product Dimensions • Width 15 – 220 mm • Height 15 – 120 mm • Length approx. 600 / 800 mm to 6,000 mm • Weight approx.max. 3000 KG / 6 meters incl. car Maximum cross-sectional diagonal of the product: 220 mm (customized) Attention: max. weight only possible if driven by the on-site roller conveyor. (A) 600 mm without trolley (B) 800 mm with trolley or distance between carriages min. 600 mm Packaging materials • PE stretch film thickness approx. 17 – 50 my (recommended 23 my) • Roll diameter max. 400 mm • Roll width max. 125 mm • Sleeve diameter 76 mm Specifications • Winding ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency controlled) Specificatio ...

Precision four-jaw chuck, chuck, faceplate, 4-jaw chuck, four-jaw chuck -Manufacturer: Klopfer, precision four-jaw chuck Ø 165 mm -Passage: Ø 49 mm -Recording: MK4 -Jaws: individually and fully adjustable -Dimensions total: Ø 165 x 230 mm -Weight: 13.6 kg

Four-sided planer Leadermac 823 Working width 230mm Working height 160mm Head system Bottom 11kw Right 7.5kw Left 7.5kw Top 11kw Top 11kw Bottom 11kw Rights 15kw Left 15kw Upper heads with supports Feed regulated on the wave Feed motor 7.5kw Rollers pulling in the table material Pneumatic upper pulling rollers Adjustment of heads by controller

Force gauge, force measuring device, calibration, force measurement technology, scale, crane scale, hanging scale -Manufacturer: dynafor , tensile force measuring device crane scale -Measuring range: up to 20 t -Dimensions box: 490/160/H160 mm -Total weight: 12 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1195 mm -Cross-section: 100 x 45 mm -Recording: see photos -Transport dimensions: 1370/610/H100 mm -Total weight: 112 kg

Offer 04446 Specifications: - Total width approx. 950 mm - Working surface length / web length approx. 420 mm - Working surface depth / web depth approx. 150 mm - Compression foot approx. W 120 x D 125 x H 140 mm - Total depth approx. 280 mm - Round horn approx. 250 mm - Square horn approx. 260 mm - Round hole in the track approx. 22 mm - Through-square hole in the track approx. 25 mm - Anvil height approx. 345 mm - Weight approx. 190 kg - Base frame W 520 x D 520 x H 345 mm - Weight 30 kg

FOLIANT Taurus 760 SF Industrial Laminating Machine year 2017 Max sheet size : 760 x 1150 mm Min sheet size : 320 x 250 mm Max speed : 30 m/min Paper weight : 115 - 600 gsm Temp control : 80 - 140 C Lamination films : BOPP 23 - 42 microns , max nylon film max 35 microns, PET film max 25 microns - Pallet Feeder - Touch screen controls - PLC controlled overlaps - Almost 8 minute warm up time - Film air shaft - Integrated Bump separator - Pallet stacker

Four jaw chuck, four jaw lathe chuck, 4 jaw chuck -four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 57 mm -Bolt circle: Ø 170 mm -Interchangeable jaws: Width 20 mm not included, can be supplied at an additional cost -Dimensions: Ø 190 x 65 mm -Weight: 8 kg

TETRA PAK CARDBOARD PACKER MODEL TCBP70 VERSION 110 U-FORM YOM 2007 WRAP AROUND

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing -Dimensions total: 130/136/H80 mm -Total weight: 7.3 kg

Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal controller, pedal switch -Foot pedal: with pressure switch -Pressure switch: Type ZE55131 Art.no. 63.015 -Number: 6 foot pedals available -Price: per piece -Dimensions: 310/280/H330 mm -Weight: 3.9 kg

Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine with accessories -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 33.2 kg

Transfer folding machine H+H/MBO 820-456; good condition; cleaned and tested; for hanging; Working width 520mm; Length 340mm. Hang up conveyor folding machine H+H/MBO 820-456; good condition; cleaned and checked; for hang up; working width 520mm; length 340mm.

Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 29.4 kg

Catalogue number: 6824 TECHNICAL SPECIFICATIONS - max width of the workpiece 220mm - max height of the workpiece 125mm 4 spindles: 1) horizontal bottom 220mm 7,5kW 2) vertical right 125mm 3) vertical left 125mm; (2 and 3 spindles) 11kW 4) horizontal top 220mm 11kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling, toothed and metal insertion rollers from above - from above 1 double shaft pulling, rubber - from the bottom of the pulling shaft, rubber - feed on cardan shafts - smooth regulation of feed speed 6-22m / min - feed motor 3kW - lifting motor 0,55kW - electrical setting of planing thickness - length of the introductory table top 2470mm - central lubrication - diameter of extraction connection 3x120mm, 140mm - locked in the cabin - dimensions length / width / height 3940x1450x1470mm - weight 1666kg – unpainte ...

Folding sheet press Tränklein BP; good condition; cleaned and tested; Working width 820mm. Bundling press Tränklein BP; good condition; cleaned and checked; working width 820mm.

Crane fork, loading fork, load fork, pallet fork, pallet crane fork, lifting equipment, roller lifter -Crane fork: with adjustable weight compensation -Type: Hoist 630x475 -Load capacity: 250 kg -Tin length: 490 mm -Usable height: 610 mm -Dimensions: 635/520/H795 mm -Weight: 21 kg

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

Clamping bars, clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, fork clamping irons -Tensioning bracket: Fork clamping iron, beveled -Slot width: 25 mm -Dimensions: 320/65/H40 mm -Weight: 3.8 kg

Foldingmachine 24P Make MBO Model K800.S 4SKTZ - FP Year 2008 Size Min: 150 x 210 mm / Max: 780 x 1200 mm Feeder MBO FP120 pallet feeder - with MBO Vaculift sheet seperation head and MBO Vacubelt suction belt VIVAS suction alignment belt, slitter shafts prior to entering buckle station, exit to left or right by turning the section Folding configuration 4 platebuckles + 2 knives + 1 buckles after the first knife Delivery OMG Economic P700 pright delivery with pressing Number of pages 16-24 pages for signatures Details Vacuum pump, noise hoods, MBO Navigator controls Available direct

Folding knife Morgana Digifold / MORGANA ET FIRST DIGIFOLD BLADE ASSEMBLY f. Art.: PS4102 Ersatzteil Nr. / parts No126-12-01

Forklift battery charger, industrial charger -Output: 36 volts -Power: 50 A -Connection: 220 volts -Dimensions: 560/350/H355 mm -Weight: 40 kg

Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg

Food shelf, kitchen shelf, catering shelf -Dimensions: 1060/650/H1760 mm -Shelf spacing: 370 mm -Material: Aluminum -Weight: 42 kg

Food shelf, kitchen shelf, catering shelf, baking tray shelf -Dimensions: 600/5500/H1450 mm -Shelf spacing: 190 mm -Intermediate dimension: 485 mm -Material: Stainless steel -Weight: 42 kg

Food shelf, kitchen shelf, catering shelf, baking tray shelf -Dimensions: 790/540/H1430 mm -Shelf spacing: 220 mm -Intermediate dimension: 330 mm -Material: Stainless steel -Weight: 45 kg

Width 82 cm Year of construction: 2005 Round stack feeder RFH-82 1st station: 6 folded pockets 82 cm automatic folding pocket adjustment automatic folding roller adjustment upstream knife shaft downstream knife shaft 2nd station: 4 folded pockets 66 cm automatic folding pocket adjustment automatic folding roller adjustment upstream knife shaft downstream knife shaft 3rd station: 2 fold pockets 56 cm automatic folding pocket adjustment automatic folding roller adjustment downstream knife shaft Standing sheet delivery SBP 66 Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Electronic control module for folding machines EUROFOLD, FALTEX used. Art.: PS21 Spare part number: 235.102 It can also be used for other types of machines. Is integrated into the vacuum supply system. Controls the operation of the machine, makes it possible to adjust the work by clock; with interruption, by a certain number of sheets; Perform direct and backward counting of the sheet. The photo on the site may differ from the original (we send it on request)

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 63 A -Connection: 220 volts -Weight: 110 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 64 A -Connection: 220 volts -Weight: 50 kg

Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling machine -Bevel length: max. 10 mm -Strength: 40 kg/mm² -220 V 1800 W -470 strokes/min -Weight: 15 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 20 A -Connection: 230 volts -Number: 7 chargers available -Price: per piece -Weight: 18 kg/piece -functionally tested

Foam block for device installation channel, small flexible foam block -Type: FBA-BK -Item No.: 7202 496 Price: per piece Quantity: 10 available -Dimensions: 75/120/H50 mm -Weight: 1 kg

THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Ven ...