tos fo used for sale

CNC Heidenhain TNC 426 with handwheel HR 410 X = 3500 mm Y = 2500 mm Z = 1250 mm W = 800 mm Table dimensions 1800 x 2200 mm Spindle diameter 130 mm Max. spindle speeds 2500 RPM External coolant 2-axis manual milling head TOS HUR 50 year 2004 almost unused.

Round Dividing Table, Rotary Table, Circular Dividing Table TOS SM500 Ø 500 mm 360° Division used, tested ! Dimensions: 700 x 700 x 200 mm

Hydraulic pump TOS RAKOVNIK GAR1-020-41PS-1K Nominal pressure: 16 MPa ( 160 bar ) Nominal displacement volume: 20 cm3 rated speed: 1500 rpm shaft: Ø 22 mm shaft length: 40 mm groove width: 6 mm flange: Ø 110 / 144 x 150 mm bolt circle diameter: Ø 148 mm hole diameter: Ø 13 mm control valve: VTK 20-6-350 New ! Dimensions: 390 x 275 x 150 mm

Dividing head with 3 jaw chuck and centering point TOS DU-250 AS ( DU-250AS ) Ø 125 IU 125 M 1- 1 max 4500 rpm center height 135 mm used, tested ! Dimensions 600 x 400 x 320 mm

Key data: 130 mm, 3000 mm, 2000 mm

Inv. Num. : 6957 Type: WHN 13 Produzent: TOS Erzeugt: 1976 Parametern: Arbeitstischlänge: 1800 mm Arbeitstischbreite: 1800 mm Maximale Tischbelastung (gleichmäßig): 120.000 kg Verfahrwege X-Achse: 3000 mm Verfahrwege Y-Achse: 2000 mm Verfahrwege Z-Achse: 800 mm Spindeldurchmesser: 130 mm DRO

Inv. Num. : 6989 Type: WH 10 NC Producer: TOS Created: 1984 Parameters: Work table length: 1120 mm Work table width: 1000 mm Maximum table load (uniform): 3000 kg Minimum spindle speed: 16 1/min Maximum spindle speed: 1250 1/min X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Cone: ISO 50

Lathe TOS SUI 40-50 Center width 1500 mm Circulation over machine bed 500 mm Circulation over support 320 mm Spindle speed 14 to 2240 rpm Quick Release - Steel Bracket § Jaw wedge bar chuck Machine is ready for operation and in good condition

Ref. -No.: 10320 Manufacturer: TOS Type of control: Digitalanzeige - Mitutoyo Control: Konventionell Storage location: Halberstadt Country of origin: Tschechien Tip length: 1500 Centre Height: 280 mm Centre Distance: 750,1000,15000,2000 mm Spindle Bore: 56 mm Swing diameter over bed: 500 mm Number of speed levels: 18 Circumferential diameter over the support: 320 mm Circumferential diameter over the bed recess: 560 mm Bed length relieved from headstock: 300 mm Universal chuck diameter: 250 mm Diameter of the clamping disc: 500 mm Further information: Universal center lathe

Ref. -No.: 10316 Manufacturer: TOS Year of construction: 1996 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Slovakia Machine length: 3450 mm Machine width: 2236 mm Machine Height: 2000 mm Weight Of The Machine Ca.: 4,4 t Grinding wheel: 260 mm Table Dimensions (Lengthxwidth): 1500 x 400 mm Height of grinding with new grinding wheel (without magnetic plate): 500 mm Grinding wheel fx width x bore: 350 x 40 - 80 x 127 mm Width of the composite grinding wheel: 200 mm Max. load on the work table: 5000 N Table surface: 400x1000 / 1500 mm Max. distance of the spindle axis: 675 mm Max. length of grinding: 1000/1500 mm

Key data: 2500 mm, 3000 mm, 2000 mm

Tos hulin CNC Sinumerik 840 C Year 1999 Table dia : 2500 mm Max turning did 3000 mm Max Turning hight 2000mm under power

Key data: 3000 mm, 1800 mm, 1600 mm

Inv. Num. : 7037 Type: OPTIMA Producer: TOS Created: 2005 Parameters: Duty cycle: 83171 h Hours: 36486 h Work table length: 2500 mm Work table width: 1800 mm X-axis travel: 3000 mm Y-axis travel: 1800 mm Z-axis travel: 1600 mm

Inv. Num. : 6079 Type: FSQ 80 CNC Producer: TOS Created: 1990 Parameters: Control system: NS 720 Work table length: 3000 mm Work table width: 800 mm Maximum table load (uniform): 1000 kg X-axis travel: 3000 mm Y-axis travel: 1000 mm Z-axis travel: 1000 mm Total power requirement: 40 kW Spindle speed: 2500 1/min Machine height: 3400 mm Machine length: 7770 mm Machine width: 4360 mm Equipment: Tool Holder

CNC table drill TOS WHN 13 with quill Built in 1991 Control FAGOR 8055 Travel xyzw 3500/1850/1330/600 mm Table size 1800 x1800 mm. Machine immediately available and available. Dismantling and loading onto suitable trucks is cost-effective. Installation and commissioning on request.

Drill press, bench drill, column drill, pillar drill -Manufacturer: TOS, high-performance column drilling machine type 40 TF / C -Motor: MEZ 2.2 kW -Speeds: 56 - 2240 rpm -Table size: 400 x 315 mm, travel 600 mm -spindle taper: MK4 -Spindle stroke: 165 mm -Projection: 290 mm -Pillar Ø: 140 mm -Dimensions: 1200/650 / H1990 mm -Weight: 602 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, spindle -Manufacturer: TOS, spindle with nut Z-axis from milling machine FN 32 -Thread: diameter 30 mm -Pitch: approx. 5 mm -Thread length: 450mm -Dimensions: 645/115/50 mm -Weight: 4.1 kg

Clamping table, clamping angle, T-slot table, rotary table, circular grinding unit, milling machine table -Attachment for a: TOS universal grinding machine -Table surface: 490 x 190 mm -T grooves: 2 -Clamping table: rotatable, pivotable, movable -Dimensions: 490/190/H290 mm -Weight: 31kg

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Number: 31 pieces adapter sleeves -for: TOS high-speed milling head -different sizes: 1-16 mm in 0.5 mm steps -Drawing with the pictures -Sale: only as a package -Weight: 5.3 kg

Cylindrical grinding machine BUB 32/2000 NC Manufacturer: TOS Hostivař Year: 2002 Control Siemens ... Simatic OP17 Max. grinding diameter ... 320mm Max. grinding length ... 2000mm Max. workpiece weight ... 350kg L x W x H ... 4600x1980x1760mm Machine weight ... 5300kg The machine is in good condition, possible to test under electricity.

Inv. Num. : 6969 Type: FSQ-C 80 Producer: TOS Generated:- Parameters: Control system: Mefi CNC 859 Milling spindle speed: 11-2500 1/min Maximum table load (uniform): 2000 kg X-axis travel: 1100 mm Y-axis travel: 960 mm Z-axis travel: 1000 mm Power output: 30 kW Cone: ISO 50 Equipment: Roundtable

Tos W 100 A NC Controlled Table Type Boring Machine Machine is in good working condition Tools are included( 15 pieces BT 50 holder and more) 1650x1250 mm Turning table Heidenhain digital control

TOS SKJ 12 vertical lathe The machine is technically efficient after replacing the transformer from the table rotation, worn out, requires inspection and feed adjustment Year of manufacture 1987 Documentation in Czech electrical cabinet dmensions 1630x590 mm, weight 675 kg

TOS-OSO FNK 2R - Tool milling machine Description- Heidenhain PT 855 position indicator - Infinitely variable speed adjustment - pneumatic tool clamp - Coolant device - Task lighting -Vice - incl. instruction manual & documents - Year of construction 2006 Specification - Table dimensions: 250 x 1100 mm - T-slots number x spacing: 4x 50 mm - Middle groove width: 14 mm H8 - Width of additional grooves: 14 mm - Max. permissible table load: 200 kg - Manual table work stroke lengthwise/crosswise/vertically: 840 / 376 / 460 mm - Motorized table work stroke longitudinal/transverse/vertical: 820 / 355 / 440 mm - Number of feed stages: infinitely variable - Feed range long/cross: 28 - 630 mm/min - Feed range vertical (reduction 1:3.3): 8.5 - 196 mm/min - Rapid feed longitudinal/transverse: 1500 mm/min - Rapid feed vertical (reduction 1:3.3): 450 mm/min - Distance from sp ...

TOS W 75

Tos FA3AV X: 890 - Y: 275 - Z: 400mm Max longitudinal travel X-axe: 890 mm Max cross-travel Y-axe: 275 mm Max travel Z-axe: 400 mm Power on spindle: 4 kW Type of millinghead: ISO 40 Spindlespeeds: 45 - 2800 rpm Table size: 1375 x 300 mm Length: 1900 mm Depth : 1900 mm Height: 1950 mm Weight: 1950 kg ACCESSORIES & TOOLING: yes

Tos WHQ 13.8 CNC Heidenhaine TNC 430 Year 2001 X 3500 Y 2000 Z 1200 W800 Table size 1800x1730 Table load 10000 kg Cooling through the spindle – yes Chipconveyor - yes ATC 60 pockets Max spindle RPM - 2800 Tools BT-50

Inv. Num. : 7260 Type: WHN 13.4 A Producer: TOS Created: 1986, GO 2003 Parameters: Control system: MEFI CNC 859 Work table length: 1800 mm Work table width: 1600 mm Maximum table load (uniform): 12 t Maximum spindle speed: 1098 1/min X-axis travel: 3000 mm Y-axis travel: 2000 mm Z-axis travel: 800 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Cone: ISO 50 Machine height: 3900 mm Machine length: 6200 mm Machine width: 5930 mm Machine weight: 32 t

Inv. Num. : 7266 Type: WH 13 Producer: TOS Created: 1972 Parameters: Work table length: 1800 mm Work table width: 1600 mm X-axis travel: 1250 mm Y-axis travel: 2200 mm Z-axis travel: 1700 mm Equipment: 4x extensions in the length of 4x1 m 8x tracks for 1000 mm extension Turntable New ball screws and bearings Tools & Equipment

Inv. Num. : 7273 Type: WH 10 NC Producer: TOS Generated:- Parameters: Work table length: 1120 mm Work table width: 1000 mm X-axis travel: 1000 mm Y-axis travel: 900 mm Z-axis travel: 630 mm

BHB 40 CNC cylindrical grinding machine Control: Marposs Servo motors: Indramat Producer: Czech Republic TOS The machine is new, it has never been used. You need to upload a program to the grinder or use a new control. The machine was started 7 years ago and after uploading a simple program, everything starts. There is everything for the machine tool, starting from a complete set of covers, through control cabinets, hydraulic systems, and manuals. Machine stored, not connected. Technical specifications: - distance between centers: 1000 mm - grinding diameter: 400 mm - wheel dimensions: 750 mm x 100 mm x 305 mm - maximum workpiece weight: 500 kg - cone: MK 5 - weight: about 10 tons

Inv. Num. : 7302 Type: SV 18 RA Producer: TOS Created: 1977, GO 2023 Parameters: Maximum turning length: 1250 mm Maximum turning diameter over bed: 380 mm Maximum turning diameter over support: 215 mm Maximum workpiece weight: 250 kg Equipment: Digital Measurement

Three-jaw chuck, three-jaw lathe chuck, scroll chuck -Manufacturer: TOS, three-jaw chuck Chuck size Ø 80 mm -Passage: Ø 16 mm -Bolt circle: Ø 70 mm -Weight: 1.2 kg

TOS W100 Horizontal Boring Mill DRO Spindle 100 mm Spindle speeds 7.1-1120 rpm X/Y/Z/W Axis- 1600/1120/1250/900 mm Table size 1250x1250 mm Max table load 3 ton Table type rotary Facing chuck diameter 600 mm Slide travel 210 mm Max facing diameter 900 mm Facing chuck speed range 7.1 - 224 rpm Total power 15 kW Dimension 6020x3000x3500 Weight 14000 kg Remarks: faceplate is available, under a fixture

CNC tool milling machine TOS Žebrák Manufacturer: Intos Žebrák Type: FNG 50 CNC E Year of construction 2001 Control system: Heidenhain TNC 426 Spindle taper: ISO40 (SK40) Spindle speed: 0-3150 rpm Axle travel: X-700mm Y-500mm Z-500mm Machine weight:2550 kg Rotatable head: -90° ~ +90° Accessories: Documentation Riding bike Cooling Tool holder see photo

Inv. Num. : 7325 Type: W 9 A Producer: TOS Created: 1983 Parameters: Work table length: 1000 mm Work table width: 1120 mm X-axis travel: 1250 mm Y-axis travel: 1000 mm Z-axis travel: 1400 mm

Tos SUI-50 Ø 500 x 1500 mm Distance between centers: 1500 mm Swing over bed: 500 mm Swing over cross-slide: 320 mm Swing in gap: 560 mm Diametre of main spindle bore: 55 mm Power on main spindle: 7,5 kW Number of speeds: 14 > 2240 rpm Length: 2900 mm Width : 1280 mm Height: 1450 mm Weight: 3 ton Steady(s) (fixed): 1x

Lathe SUS 63/3500 TOS with fixed steady

Double shaft multi-saw TOS SVITAVY PWR 402 440/200 - year of production 2005 - DTR documentation - Czech production track width 440 mm cutting height 55 mm - 200 mm disc diameter 350 mm 22 and 30 kW main engines 3 kW feed motor feed speed adjustable on the inverter the top five pinch rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication rollers diameter 60 mm, wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 43 cm spigot diameter 200 mm transport dimensions (length / width / height) 280/245/230 cm weight 4770 kg

Multisaw TOS SVITAVY PKSN 32A 350/120 – Czech production cutting width 350 mm cutting height 120 mm engine power 30 kW max. disc diameter 400 mm feed smoothly adjustable up to 60 m/min spindle diameter 60 mm sleeve diameter 80 mm table top size 960 x 2100 mm max. element width 550 mm min. element length 800 mm three rows of pawls two top rollers spigot diameter 2 x 150 mm machine dimensions (length/width/height) 250 / 245 / 220 cm weight ~ 1800 kg

Double shaft multisaw TOS SVITAVY PWR 402 440/200 – year of manufacture 2005 – technical documentation – Czech production track width 440 mm cutting height 55 mm - 200 mm disc diameter 350 mm main engines 2 x 55 kW feed motor 3 kW feed speed adjustable on a gear motor five upper pressure rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication shaft diameter 60 mm wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 43 cm spigot diameter 200 mm transport dimensions (length / width / height) 280 / 245 / 230 cm weight 4770 kg Multisaws are machines used in the wood industry mainly for cutting prisms, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle ...

Type: VSP 50 CNC Parameters: 11750 mm, 2000 mm Manufacturer: Tos Description: The machine is in good technical condition, after agreement the possibility of testing. Main dimensions maximum and smallest distance of the spindle axis from the stand guide: -version without tool magazine 2500/500 mm -version with tool magazine 2500/600 mm maximum and smallest spindle end distance: -from bed guide 1480/380 mm -from the base of the machine 1860/760 mm headstock adjustment 2000 mm adjustment of the headstock on a machine with a tool magazine 1900 mm arm adjustment 800 mm Sleigh adjustment: -version with one bed 1000 mm -version with two beds 4500 mm -version with three beds 8000 mm -version with four beds 11500 mm Maximum drilling diameters: diameter of drilling fully into steel with a strength of 600 MPa 50 mm diameter of drilling completely into cast iron with a strength o ...

Type: H 100A Parameters: 100 mm, 1250 mm Manufacturer: Tos Year of production / SO / GO: 1970 / - / 2004 Description: Machine in good technical condition. Possibility of testing after agreement. Working Spindle Diameter 100 Mm Iso 50 Spindle Taper Table Clamping Area 1250 X 1250 Mm Max. Workpiece weight 3000 Kg Longitudinal Table Movement - X Axis 1250 Mm Transverse Table Movement - Z Axis 1250 Mm Vertical Table Movement - Y Axis 1120 Mm

We hereby offer this used TOS Sua 125 CNC lathe from 2011, located in Finland. Equipped with an advanced Fagor 8055 control unit, this machine ensures precise and efficient operations. With a substantial turning length of 1920 mm, it caters to a diverse range of metalworking tasks. The low-speed 630 rpm spindle, coupled with a robust 37 kW motor, guarantees powerful and accurate machining. Invest in this reliable CNC lathe to enhance your production processes, delivering exceptional results with every project. Technical specifications: Year: 2011 Made in: Czech Republic Control unit: Fagor 8055 Turning diameter: 1250 mm Turning length: 1920 mm Swing over carriage: 930 mm Distance between centers: 2000 mm Height above bed. 625 mm Cutting force: 10000 N Spindle speed: 4 - 630 rpm Spindle bore: 128 mm Spindle nose: ČSN ISO 702/II Motor power: 37 kW Dimensions: Length: 5 ...

Type: FGS 63B CNC Parameters: 630 mm, 2000 mm Manufacturer: Tos Year of production / SO / GO: 1999 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. TNC426 control system. Technical parameters: Working range - travels: X-axis: 1250 mm Y axis: 850 mm Z axis: 500 mm Max. table load: 1000 kg Table clamping area: 630 x 1600 mm Working feed: X-axis: 1 - 40,000 mm / min Y axis: 1 - 4000 mm / min Z axis: 1 - 2000 mm / min

Inv. Num. : 7242 Type: MC 100V Producer: TOS Trenčín Created: 1997 Parameters: Control system: Heidenhain Work table length: 1080 mm Work table width: 579 mm Maximum spindle speed: 8000 1/min X-axis travel: 1016 mm Y-axis travel: 610 mm Z-axis travel: 508 mm Tool magazine capacity: 40 Machine weight: 6000 kg

Inv. Num. : 7268 Type: WFN 180 HSQ Producer: TOS Created: 2001 Parameters: Control system: Heidenhain 430 m Shrek Operating hours: 110727 h Maximum spindle speed: 24000 1/min X-axis travel: 2500 mm Y-axis travel: 2000 mm Z-axis travel: 1240 mm

Inv. Num. : 7270 Type: WHN 13.8 CNC Producer: TOS Created: 1996 Parameters: Control system: Heidenhain 426 C Hours: 145790 h Maximum spindle speed: 1500 1/min X-axis travel: 3500 mm Y-axis travel: 2000 mm Z-axis travel: 1250 mm W-axis travel: 800 mm B-axis: 1600 x 1800 mm

Inv. Num. : 6681 Type: SUS 63/5000 Producer: TOS Generated: Parameters: Maximum turning length: 5000 mm Maximum turning diameter over bed: 655 mm Maximum turning diameter over support: 390 mm Spindle diameter: 82 mm Equipment: Chuck Grasshopper Digital Measurement Knife Fixed bezel Movable bezel

Inv. Num. : 6528 Type: WH 80 Producer: TOS Created: 1966 Parameters: Spindle diameter: 80 mm Cone: Morse 5 Equipment: DRO Vice Dörne Console (1000 x 500) The machine is in good technical condition.

Roll grinding machine TOS BEV 100/6000 for refurbishment.

Inv. Num. : 7192 Type: BU 28/630 CNC Producer: TOS Created: GO 2004 Parameters: Total power requirement: 10 kVA Maximum grinding length: 630 mm Tip stroke: 140 mm Maximum weight of the workpiece: 65 kg Distance between tips: 630 mm Machine height: 1600 mm Machine length: 3750 mm Machine width: 2300 mm Machine weight: 3000 kg