tos fo 10 used for sale

Electric motor, three-phase motor -Manufacturer: ZP, electric motor type 100 -Power: 3.3/2.6 kW -Speed: 2800/1400 rpm -Shaft: Ø 24 x 50 mm -Design: B5 -Dimensions: 355/235/H200 mm -Weight: 24 kg

4000 x 2000mm 10KW Fiber laser / 10,000w Fiber laser

Used HAPPLE control screen sieve machine in good condition Screen basket 400 x 1000 mm n=270 rpm, with spare sieving basket Power 4 kw

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 105 mm -Max. trolley speed 30 m/min -pusher with 6 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

Transport trolley, platform trolley, transport trolley, table trolley, assembly trolley -Manufacturer: Krieg, trolley table with 3 shelves -Load capacity: kg -Chassis: 2 swivel casters, 2 fixed casters -Dimensions: 1000/600/H1210 mm -Weight: 43 kg

Centrifugal pump, water pump, domestic water pump, garden pump -Manufacturer: Neptun, garden pump type NGP 100i -Connection: 230 volts -Power: 1000 W -Flow rate: max. 4600 l/h -Delivery head: max 45 m -Dimensions: 415/220/H230mm -Weight: 9.1 kg

Storage containers, transport storage containers -Storage container: made of stainless steel with 3 compartments, mobile -3 compartments: with container, see photos -Dimensions:1035/520/H640 mm -Weight: 48 kg

Bottle filler, make BKM, type: Varifill 40/10K/10PP-100, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, built 1994.

conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt type ZFT -Speed: m/min -Conveyor belt length: 1400 mm -Belt spacing: 560 mm -Conveyor width: 1000 mm -Drive: SEW-Eurodrive 0.18 kW 1380/71 rpm -Dimensions: 1450/1350/H750 mm -Weight: 135 kg

conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: conveyor belt with underframe -Speed: 23 m/min -Belt width: 100 mm -Conveyor length: 1040 mm -Total dimensions: 1040/350/H670 mm -Weight: 26 kg

Forklift attachment, crane arm, load arm -Manufacturer: Meyer, crane arm load arm for forklift trucks -Load capacity: 1000 kg -Mounting: Forklift, dimensions see photos -Dimensions: 1800/840/H980mm -Own weight: 83 kg

Key data: 1050 mm, 3 mm, 1000 mm

Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized backgauge up to 1000 mm with fine adjustment via handwheel Shear angle adjustment Knife sharpened Operating instructions Weight: approx. 1400 kg

Electric motor, three-phase motor -Manufacturer:TH.Halter, electric motor type DI 100 L-2 -Power: 3 kW -Speed: 2880 rpm -Shaft: Ø 28 x 60 mm -Design: B14 -Protection class: IP54 -Dimensions: 365/195/H235mm -Weight: 21 kg

hinge, door hinge, folding hinge, steel hinge -Hinge: Door hinge folding hinge 2-part, box with 50 pieces -Type: 2-part 105x50 mm -Material: galvanized steel -Number: 23x packages available -Price: per package (50 pieces) -Dimensions: 200/150/H140 mm -Weight: 6.4 kg/package

Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: Lenze, gearbox type 12.102.60.1.1 i 37,80 -Shaft: Ø 60 x 140 mm / Ø 38 x 80 mm -Dimensions: 575/295/H370mm -Weight: 87 kg

Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: Nord, gear motor -Type: SK 30-100L/40 i= 4.29 -Speed: 326 rpm -Engine: 3 kW / 1400 rpm -Shaft: Ø 40 x 80 mm -Dimensions: 550/260/H310mm -Weight: 45kg

Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: T (Thyssen) Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 14,100 mm Number of bays per row of shelves: 05 pcs. á 2,700 mm Number of levels plus floor level: 02 pcs. Volume Specifications: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 45 pcs. Total pallet spaces: 45 pcs. Started from: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,000 kg The scope of delivery includes: 06x Pallet rack stand, used Material color: blue Profile dimensions: 100 x 65 x 2.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) 2,200 mm high 1,100 mm deep 20x Pallet rack trusses, used Ma ...

Collision protection, ram protection, shelf protection, column protection, column collision protection -Manufacturer: A-SAFE, collision protection pillar protection spacer 2 pieces -Type: R-01-01-0011 150 mm Spacer -Delivery/Price: complete -Dimensions: 230/180/H600 mm -Weight: 2.2 kg/piece

Used filling tank with a capacity of 1000 kg. The tank has an agitator and a heating jacket.

Treif Felix 100-CE dicing and strip cutting machine Performance max. 0.8 t/h Including one grid set for cubes (consisting of two single grids) Including cutting knife Max. cutting-off length 0.5-32 mm Click & go quick change gridset system Refurbished condition

number of stapling heads: 1 serial no.: 8074 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gearbox, bevel gear, worm gear -Gearbox: Worm gear ratio: i = 7.5 -Shafts: Ø 14 x 34 mm / see photos -Dimensions: 122/105/H140 mm -Weight: 4.2 kg

Gearbox, bevel gear, worm gear -Gearbox: Worm gear Ratio: i = 16 -Shafts: Ø 7 x 25 mm / Ø 10 x 35 mm -Dimensions: 100/107/H96 mm -Weight: 0.7 kg

Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module, Connection Device Fieldbus -Manufacturer: Sick, fieldbus module for Profibus -Type: CDF600.0100 -Article number: 1041251 -Number: 44x modules available -Dimensions: 225/75/H50 mm -Weight: 0.6 kg/piece

number of heads: 2 drilling capacity diameter min.: 3 mm drilling capacity diameter max.: 20 mm serial no.: 26332 voltage: 280/220 V Dimensions (L/W/H): 80x120x170 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Safety controller, safety switch, safety sensor, overload trip power sensor -Safety sensor: Overload trip power sensor -Type: BEV-1013 -Quantity: 1x available -Dimensions: 180/145/H95mm -Weight:1.6 kg

Saw blade, wood saw blade, circular saw blade -Manufacturer: EDN, saw blade HW 12 / 1459 -Type: NE3 350x3.2x32Z=108neg -Speed: n max. 5000 rpm -Use: non-ferrous profiles/plastics -Quantity: 2x saw blade available -Price: per piece -Dimensions box: 385/385/H10 mm -Weight: 1,9 kg

number of feeders: 6 max. speed: 9000 /h max. paper size: 31,1 x 35,5 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. film width: 355 mm max. speed: 0 /h serial no.: 8518 voltage: 100-240 V frequency: 50-60 Hz weight: 150 kg dimensions of press (L x W x H): Belichter 75 x 85 x 100 cm dimensions of press (L x W x H): RIP 70 x 50 x 70 cm repeating accuracy: +/- 25 µm RIP included up to 3000 dpi Red laser diode max. page width 355 mm max. 200 lpi screen ruling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial no.: 9174 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 101 mm -Dimensions: see photo technical drawing -Dimensions: 117/83/H140 mm -Weight: 1.8 kg

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 106 mm -Dimensions: see photo technical drawing -Dimensions: 125/95/H90 mm -Weight: 1.8 kg

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 108 mm -Dimensions: see photo technical drawing -Dimensions: 124/73/H130 mm -Weight: 1.8 kg

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, cranked clamps -Clamping tool: clamping iron -Bore: Ø 17 mm -Groove width: 28 mm -Dimensions: 109/82/H113 mm -Weight: 1.1 kg

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, cranked clamps -Clamping tool: clamping iron -Bore: Ø 18 mm -Dimensions: 106/53/H111 mm -Weight: 1.7 kg

electric motor, three-phase motor -Manufacturer:Elmot-Schäfer, electric motor type ESHE 100LB-4 -Power: 3 kW -Speed: 1440 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP55 -Dimensions: 370/250/H280 mm -Weight: 37 kg

measuring stand, tripod, dial gauge holder, test stand, dial gauge holder, dial gauge stand, magnetic measuring stand, dial gauge stand -Manufacturer: BYK, measuring stand type 5510 -Measuring scale: 0-1038mm/40 7/8 -Dimensions: 300/200/H1270 mm -Weight: 10 kg

pressure: 100 t throat: 345 mm stroke: 20-100 mm no. of strokes: 60 Hub/min ram - range of adjustment: 85 mm table surface area: 980x650 mm ram surface: 600x440 mm hole in the table: Ø 200 mm table height: 820 mm tool hole in ram: ¤7 65 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 2000x2000x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power converter, power supply, power pack, switching power supply, power supply, switching power supply, power supply -Manufacturer: Balluff, power supply switching power supply -Type: BAE0002 BAE PS-XA-1W-24-100-004 -technical data: see type plates photos -Dimensions: 120/85/H130 mm -Weight: 1.4 kg

Connectors, plugs, 1-wire female connector, -Manufacturer: Wago, 1-conductor female connector Box with 50 pieces -Type: 734-107/037-047/ 7-pin -Quantity: 7x box available -Price: per box -Dimensions box: 200/145/H40 mm -Weight: 0.4 kg/carton

Connectors, plugs, 1-wire female connector, -Manufacturer: Wago, 1-conductor female connector Box with 60 pieces -Type: 769-103 3-pin -Price/Delivery: complete -Dimensions box: 290/130/H70 mm -Weight: 0.6 kg

Gebr. Slotted cutter for tenon cutters Carpentry joinery machine such as KRÜSI ZA-66 or REX ZA 800 SATURN 5.109 Tool diameter: 450 Tool height: 31-60 mm Aluminum From location. No shipping!

Connectors, plugs, 1-wire female connector, -Manufacturer: Wago, 1-conductor female connector Box with 50 pieces -Type: 769-102 2-pin -Price/Delivery: complete -Dimensions box: 280/80/H60 mm -Weight: 0.4 kg

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles -Manufacturer: GH, angle connector with web 29 pieces -Type: GH-WVB 105x105x90x2.0mm -Price/Delivery: complete -Weight: 0.3 kg/piece

Capacity 3 ton/hour Motor power 200Kw Die diameter 1000 mm Number of rollers 5

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles, wood connectors -Manufacturer: GH, angle connector with web 27 pieces -Type: GH-WVB 90/100S 100x100x90x3 mm -Price/Delivery: complete -Weight: 0.4 kg/piece

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles, wood connectors -Manufacturer: GH, angle connector 19 pieces -Type: GH-WVB 90/100S 100x100x90x2 mm -Price/Delivery: complete -Weight: 0.2 kg/piece

Alexanderwerk WRN 100 Planetary Agitator  High-performance stirring and beating machines for professional use. With 100 litre mixing bowl, plastic protective screen • Stirring, beating and kneading of doughs, meat and frothy masses • Stirred tank capacity 100 liters volume • Fixed protective shield made of plastic  • 400 V, 50 Hz • incl. stirrer, broom and dough hook Application Kneading, mixing, stirring, beating More items new and used - can be found in our shop! International shipping costs on request!

FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...