tos 63 used for sale

There are 2 identical SGB transformers available. Theoretical power: 630kVA, peak power: 340kVA, average power: 300kVA. The transformers are only sold as a package deal. Individual machines cannot be sold separately.

MAN D2066 cylinder block 51.01100-6361 / 51.01100-6371 for 2850 Euro / each., The block is used in good condition, delivered with 3 months warranty.

Manufacturer: SMG / Feintool Type: HFA 6300 Year of construction: 1988 Total force: 4000-6300 kN Ring serrated force: 320-3200 kN Counter holding force: 130-1300 kN Safety distance: 153 mm Trailing distance max. 10 mm Closing speed: 120 mm/s Plunger stroke beu max tool height: min.-max. 30-150 mm Tool clamping surface at the top: 900 x 900 mm Tool clamping area at the bottom: 910 x 1350 mm Tool installation height max: 410 mm Tool installation height min: 330 mm Main drive: 90 kW Total connected load: approx. 120 kW Weight of the press: approx. 31 t

Emergency power supply system as a 630 kVA diesel generator in a soundproofed container from a DATA Center with MTU 12 V 2000 engine Aggregate type: stationary Version: container Technical data engine: Engine manufacturer: MTU Engine type: 12 V 2000 Engine No.: 535102610 Engine power: 565 KW Cooling: Water-cooled Tempering: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: FKI Marelli Generator type: M8B 400 SB4 B3 Gene. Item no.: HM28 167-11 Generator power: 630 kVA Voltage: 400 / 231 volts Power factor: cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: no switch Delivery: Assembled Tank, version: Mounted on the container Capacity / litre: 4.200 Dimensions of the p ...

Sheeting machine Fabr Rollfix Type 3W-6300

Type: MCFV 1250 X-axis: 1250 mm Y-axis: 600 mm Z-axis: 635 mm Table dimensions: 1450 x 610 mm Admission in spindle (ISO): ISO 50 Power on the spindle: 15/18,5 kW Control : Heidenhain Toolchanger: yes, 2 toolchangers Number of toolholders: 2x 16 positions Number of rotations: 1 > 2800 rpm Power principal motor : 38 kW - 150 amp Length: 3200 mm Depth: 2200 mm Weight: 7,2 ton

Lippert belt conveyor GF 630-650-500 RA1478 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 630 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB-5E Year of construction: 200 ...

Vehicle data: Make: Dana, Type: Spicer 13,7 HR32312-632X, Drive type: None, \Year of construction: 0, Internal number: DIV1201-1, Mast data: Dimensions: Battery & charger: Description & special equipment: Attachments: Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description:

Transnorm accumulation roller conveyor 6300-700-630 RA2074 Make: Transnorm Roller width (RB): 630 mm Nominal/outer width (NB): 700 mm Length: 6300 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Drive Eletrical Data: 380 V, 0,37 kW Accumulating space size: 700 mm Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: scope of delivery: without supports and side guides Driven: YES Construction year: 2007 Engine type: SEW Eurodrive Zentralantrieb mit Spannstation Nominal / outside width in mm: 700 condition: gut nominal voltage: 380-480 V Conveyor speed m / s: bitte Kontaktieren Roll division in mm: 76 Roll width in mm: 630 Conveying length in mm: 6300 St ...

SBZ 630/11/R machining center from Elumatec in mint condition. The machine has only been put into operation by Elumatec, otherwise never used. Original price € 636,000.00 net ex works Elumatec. For more information, please call us. The price is from stock Baku excluding transport costs and dismantling. It can also be done on request including delivery to DE.

Inv. Num. : 6951 Type: BKoE 630x1000 Producer: VEB Generated:- Parameters: Working table length: 1000 mm Working table width: 630 mm Minimum spindle speed: 36 1/min Maximum spindle speed: 2240 1/min Maximum distance between the spindle axis and the table: 20-850 mm Spindle power: 9 kW Machine weight: 5900 kg

Horizontal machining center Mori Seiki SH 630 ::SPECIFICATIONS::: CNC Model: Mori Seiki - CNC version: MSC - 516 - Tool connection: iso 50 - Spindle power: 30Kw - Number of spindle revolutions: 10000 Number of tools: 60 - X Axis Stroke: 840mm - Y Axis Stroke: 760mm - Z Axis Stroke: 840mm Rapid feeds linear axes X Y Z: 50m/min Pallet size: 630x630mm Pallet type: indexed Pallet degrees: 1 Maximum load allowed: 1200Kg High cooling pressure: yes System with external tank with filter: yes Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 5537mm Width: 3172mm Height: 3205mm Weight: 18500Kg

Lippert belt conveyor ascending conveyor GF 6330-650-500 RA1476 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6330 mm (ascending conveyor 2930mm + arch 400mm + upper straight 2000mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (U ...

Ref. -No.: 10357 Manufacturer: STARRAG HECKERT Year of construction: 2007 Type of control: CNC Steuerung Control: Sinumerik 840D Country of origin: Schweiz X-Travel: 1200 mm Y-Travel: 950 mm Z-Travel: 1200 mm Work spindle drive power (25% ED): 67 kW Work spindle torque (25% ED): 1508 Nm Tool Taper: HSK-A100 Workpiece interference circle diameter: 1250 mm Tool Piece Magazine With: 80 Pcs./pcs. Tool changer: Werkzeugkettenmagazin Max. Workpiece height: 1200 mm Feed Speeds X/Y/Z Axis: 60000 mm / min Feed Capacities X/Y/Z: 22/18/22 N Speed range - main spindle: 20 - 6000 RPM Numbers Of Pallets: 2 Max pallet load: 1500 kg Size Of Pallet: 800 x 630 mm pallet change time: 14 s Pallet clamping area (lxw): 800 x 630 mm Weight Of The Machine Ca.: 25 t

Ref. -No.: 10342 Manufacturer: STARRAG HECKERT Year of construction: 2015 Type of control: CNC Control: Fanuc Series 16i Storage location: Halberstadt Country of origin: Schweiz Serial no.: 12217 X-Travel: 1000 mm Y-Travel: 910 mm Z-Travel: 835 mm Distance spindle center - table: 100 mm Table Dimensions (Lengthxwidth): 630 x 800 mm Table Load: 1250 kg Max. Tool Length: 600 mm Max. Tool Diameter: 500 mm Tool Taper: HSK-A 100 Numbers Of Tools In Magazin: 240 Spindle Speed: 20 - 6000 RPM Feed Capacities X/Y/Z: 20.000 N Rapid Traverse: 40 m / min Internal cooling: 30/40/50 bar External cooling: 2 bar

Manufacturer: Indramat Permanentmagnet- Drehstromservo, Type: 63B-0-0S-2-C/95-B-0/S001, Serial number: 29288, Year: 95, was installed in machine: IMA Maschine, Year :95

diameter: 630 mm inner taper: . mm hollow: 250 mm Thickness: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m 3 jaw chuck hole circle approx. 235 mmThe technical. Data are manufacturer or operator information and are therefore non-binding. We reserve the right to make an interim sale, Our terms and conditions of business and sales apply exclusively. About us More than 400 of our own machines in the warehouse Over 12,000 m² of storage space, crane capacity 70 tons More than 1000 items Accessories for your workshop If you want to sell machines production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 630 mm total power requirement: . kW weight of the machine ca.: . kg dimensions of the machine ca.: . m 950 U/Min Dicke: 120 mm J11SWB Siehe PDF Anlage The technical Data is manufacturer or operator information and therefore for us not binding. We reserve the right to make an interim sale, it apply exclusively our business and conditions of sale. About Us more than 400 of our own machines in warehouse over 12,000 m² of storage space, crane capacity 70 t more than 1000 items of accessories for your workshop You want to sell machines production lines or your business, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drive : 75 KW Dimensions : L 3800 mm x W 1600 mm x H 2200 mm Weight : 3900 kg.

1 fixed setting stick with roller quills 1 moving setting stick

ELNIK Lab furnace MIM3001L-T-50-CF-AB 630,843,011 220,795,054 -AC-AP-DP-STC12-CE-14 year 2022

x-travel: 630 mm y-travel: 500 mm z-travel: 500 mm spindle taper: SK 40 table surface area: 800 x 500 mm table load capacity: 500 kg control: Siemens 810 IKZ spindle speed:: 6000 U/min total power requirement: 30 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 4,10x2,40x2,7 m Without accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Veneer splicing machine from KUPER, type FWM 630 max. veneer thickness : 2 mm min. veneer thickness : 0.4 mm Composite material : Glue thread with piston heating Machine type : Tabletop model Feed speed : 7 m/min Feed Type : Fixed Column projection : 630 mm #4716 Net prices plus VAT

Key data: 660 kg, 630 mm, 40000 1/min.

Fully automatic chip splitter - groove grinding machine for HSS - saw blades: Functionality: -Insertion / clamping of the saw blade -Enter number of teeth -Press Start in the touch screen - After the Groove grinding, remove the finished saw blade... ready. No further adjustment work necessary, as the tooth pitch, tooth depth, saw blade diameter is measured FULLY automatically by laser in the shortest possible time! All grinding parameters such as grinding speed, grinding wheel width, Groove depth, groove spacing, etc. are specified in advance via the control software / touch screen can be pre-set as required! - Saw blade range: 160 - 630 mm diameter - Tooth pitch from 2.5 mm or larger - Saw blade thickness: max. 8 mm - Grinding spindle: electronically controlled HF spindle (40000 rpm) incl. sealing air connection ! - Grinding wheel: CBN/diamond - 30 mm diameter,  ...

Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500

Key data: 650 mm, 250 mm

Round Dividing Table Peiseler ATSP 630 Table size 650mm x 650mm Table height 250mm

Interface, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-6303 -Type: 2083016303 -Number: 2x control cards available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.26 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gearbox Nord type: SK01R-63L-4-100LU -Motor power: 0.18 kW -Speed range: 68-340 rpm -Motor: adjustable -Height of shaft axis: 102 mm -Drive shaft: Ø 20 mm -Construction: B3 -Number: 4 motors available -Price: per piece -Dimensions: 465/180/H310 mm -Weight: 20.55 kg

Slat aprons, samurai aprons, machine covers, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, guide cover -Dimensions: 630/205/H5 mm -Weight: 3.5 kg

Turning tool holder, CNC internal turning tool holder -Different sizes -Outer diameter: Ø 63 mm -Sale: as a package -Weight: 9.5 kg

Gear motor, electric motor -Speed: 30 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Weight: 9 kg

Gear motor, electric motor -Speed: 30 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Weight: 9 kg

Thread cutter, tapping machine, tapping machine -Integrated reversing gear: with fast reverse -Nominal consumption: 230 watts -Max. Cutting capacity: M6 -Connection: 230 volts -Weight: 2.5 kg

Thread cutter, tapping machine, tapping machine -Integrated reversing gear: with fast reverse -Nominal consumption: 280 watts -Max. Cutting capacity: M8 -Connection: 230 volts -Weight: 2.5 kg

Thread cutter, tapping machine, tapping machine -Integrated reversing gear: with fast reverse -Nominal consumption: 230 watts -Max. Cutting capacity: M6 -Connection: 230 volts -Weight: 2.5 kg

Thread cutter, tapping machine, tapping machine -Manufacturer: Fein, tapping machine type ASg 636 -Rated consumption: 280 watts -Max. Cutting capacity: M8 -Speed: 450 rpm -Connection: 220 volts -Number: 2x tapping machine available -Price per piece -Dimensions: 330/150/H80 mm -Weight: 2.3 kg

Radial fan, chip extractor, fan, suction, chip fan -Centrifugal fan in a galvanized housing, soundproofing -Motor power: 30 kW -Speed: 2920 rpm -Volume flow: 36000 m³/h -Total pressure: 1600 Pa -Connection input: Ø 800 mm -Connection output: Ø 750 x 600 mm -Dimensions: 2500/2350/H2700 mm -Weight: approx. 1500 kg

Roller conveyor, roller conveyor, roller conveyor -Roll width: 630 mm -Conveying length: 3400 mm -Diameter roller: 50 mm -Height: 350 mm -driven: via flat belt -Dimensions: 800/4100/H350 mm

V-belt pulley, pulley -V-belt pulley: 4-groove pulley type SPA630-04 3535 -V-belt width: 13 mm -Receptacle: SKF Ø50 mm taper clamping bushing 3535 50 -Dimension: Ø635 x 90 mm -Weight: 38 kg

Adjustable traverse, crane traverse, indoor crane, workplace crane, crane hook traverse, load traverse, leveling traverse, beam traverse -Manufacturer: Pfeifer, crane traverse for transporting a wide variety of loads -Type: 04.315.063.063 -Load capacity: 6300 kg -Length: 6410mm -Dimensions: see photo techn. drawing -Total dimensions: 6410/480/H960 mm -Own weight: 505 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motovario, gear motor type NHRV -Speeds: approx. 100 rpm -Manufacturer motor: DRdrives type 63A-2 -Power: 0.18 kW / 2720 rpm -Hollow shaft: Ø 14 x 60 mm -Dimensions: 288/155/H125 mm -Weight: 5.3 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motovario, gear motor type NHRV/ 030 -Speeds: approx. 67 rpm i= 20 -Manufacturer motor: DRdrives type 63A-4 -Power: 0.12 kW / 1360 rpm -Hollow shaft: Ø 14 x 60 mm -Dimensions: 288/155/H125 mm -Weight: 5.3 kg

Clamps, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamps, accessories -Clamps: fork clamps bevelled -Type: DIN 6315 B 40 x 400 -Slot width: 40 mm -Dimensions: 405/100/H60 mm -Weight: 10.9 kg

Socket distributors, portable distributors, solid rubber distributors, adapters, site power distributors -Manufacturer: Gifas, solid rubber distributor adapter 16A / 63A -Transport dimension: 230/230/H130 mm -Weight: 15 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Cebeha, gear motor type C30-63K/4DC -Speed: 106 rpm -Motor: 0.12 kW / 1340 rpm -Shaft: Ø 20 x 40 mm -Protection class: P33 -Total dimensions: 335/170/H170 mm -Weight: 11 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Nord, gear motor type SK 0-63L74-016 Speed: 148 rpm -Power: 0.18 kW -Shaft: Ø 16 x 40 mm -Protection class: IP44 -Dimensions: 340/130/H170 mm -Weight: 9 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Emod, gear motor type SK400SUF-63L-4/2 -Speed: 175/356 rpm -Power: 0.15/0.19 kW -Shaft: Ø 14 x 60 mm -Protection class: IP54 -Dimensions: 300/170/H180 mm -Weight: 10.6 kg

Thread cutter, tapping machine, tapping machine -Manufacturer: Fein, tapping machine type ASsld 636 -Rated consumption: 180 watts -Max. Cutting capacity: M6 -Speed: 450 rpm -Connection: 220 volts -Dimensions: 400/100/H80 mm -Weight: 3kg

Quick change tool post, tool holder head, quick change tool post, quick change boring tool post, quick change boring bar post, quick change turning tool post -Manufacturer: AXA, quick-change tool holder Multifix D1H 63180 -Shot dimensions: see photos -Clamping length: 180 mm -Dimensions: 180/95/H185 mm -Weight: 8.3kg