tornos as used for sale

Vibro screening machine in flat design SWECO ASAP LP 30S64, Material VA, ø 800, From ø 200, 2 vibro motors Sandwich sieve many new parts Spare screen frame

-Vat for lifting kneader Kemper F 150 ASL -Stainless steel boiler -Car overhauled and repainted -2 new roles -Boiler diameter outside: 103,5cm -Boiler height inside: 50cm

sheet width: 3100 mm plate thickness: 6 mm pre-bending: 5 mm upper roll diameter: 170 mm min. bending diameter: Ø 255 mm bending speed: 4,5 m/min total power requirement: 4 kW weight of the machine ca.: 2300 kg dimensions of the machine ca.: 3800x1100x1130 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting kneader Kemper F 150 ASL completely overhauled Completely overhauled Kemper lifting kneader Model F150ASL with 2 to 7 stainless steel boilers for a maximum of 240kg dough each.The machine is completely overhauled and repainted, new electrics, new ball bearings, new gears.The machine can be inspected and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - at 2 speeds - with 2 automatic timers (new) - with stainless steel lifting arm - per kettle max. 150kg flour or 240kg dough - with flour dust cover - Boiler with handle - all ball bearings grained - complete electronics new - V-belts new - Machine completely repainted

- Ink Tank Sub Assy - HP Part Number CA245-26730 - for HP Indigo Series 2 Machines

- MIC 1 Board Assy - HP Part Number CT256-00541 - for HP Indigo Series 2 Machines

- NIP Roller Assy - HP Part Number CA245-14761 - for HP Indigo Series 2 Machines

- Heat Exchanger Assy - HP Part Number CA245-07300 - for HP Indigo Series 2 Machines

- SP Feeder Drawer Motor Assy - HP Part Number CA397-01630 - for HP Indigo Series 2 Machines

- Pump Tubing Assy LIC - HP Part Number CA345-19180 - for HP Indigo Series 2 Machines

- Upper Guide Assy for IFR - HP Part Number CT345-16604 - for HP Indigo Series 2 Machines

- Tank Control Unit Board Assy - HP Part Number CA257-00080 - for HP Indigo Series 2 Machines

- Impression Roller Assy - HP Part Number CA245-22530 - for HP Indigo Series 2 Machines

- Gripper Shaft Assy light - HP Part Number CA245-20253 - for HP Indigo Series 2 Machines

- Double Gripper Assy - HP Part Number CA245-11531 - for HP Indigo Series 2 Machines

- Bracket Motor Assy - HP Part Number CA245-03261 - for HP Indigo Series 2 Machines

- PIP Holder Assy - HP Part Number CA245-16542 - for HP Indigo Series 2 Machines

- Feed Driven Roller Top Assy - HP Part Number CA245-08802 - for HP Indigo Series 2 Machines

- Wall Engage Assy BID2 - HP Part Number CA245-16490 - for HP Indigo Series 2 Machines

- Wall Engage Assy BID6 - HP Part Number CA245-16510 - for HP Indigo Series 2 Machines

- Motor Assy - HP Part Number CA245-07970 - for HP Indigo Series 2 Machines

- ITM Heater Lamp Assy - HP Part Number CA254-02450 - for HP Indigo Series 2 Machines

- C.S. Wetting Bearing Assy - HP Part Number CT245-28471 - for HP Indigo Series 2 Machines

- MOP Assy for BDU 1-4 BID - HP Part Number CA345-10084 - for HP Indigo Series 3 Machines

- MIC 2 Board Assy - HP Part Number CA357-00303 - for HP Indigo Series 3 Machines

- Ink Tank Sub Assy - HP Part Number CA245-26730 - for HP Indigo Series 3 Machines

Operating hours 41636/36290

- Drive NIP Assy UW CR - HP Part Number CA245-14780 - for HP Indigo Series 3 Machines

- Motor Lift Assembly - HP Part Number CT345-13083 - for HP Indigo Series 3 Machines

- IOC 3 Assy - HP Part Number CA354-01151 - for HP Indigo Series 2 and 3 Machines

- Cleaning Pump Assy - HP Part Number CA254-02350 - for HP Indigo Series 3 Machines

- Motor Pully ASM - HP Part Number CA345-20111 - for HP Indigo Series 3 Machines

- Motor Control Board Assy - HP Part Number CA356-00911 - for HP Indigo Series 3 Machines

- TIC Board Assy - HP Part Number CT345-48431 - for HP Indigo Series 3 Machines

Used lifting kneader KEMPER, Type: F 75 ASL -In bakery condition- - for 75 kg flour or 120 kg dough - incl. dust cover - Condition: technically good, ready for immediate use - including 2 tank cars - El. Connection: 400 V, 50 Hz, 3 Ph, 16 A Viewing and test run are possible by arrangement.

Internal cylindrical grinding machine make KARSTENS type ASA 500Top height: 175 mmTip width: 500 mmDimensions LxTxH: 1850 x 1200 x 1300 mmWeight approx: 1500 kgWith- swiveling workpiece spindleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Saw blade sharpening machine make SCHMIDT type Tempo ASM 2Machine -No: 6411Technical specifications:for saw blade diameter: 20 - 200 mmTooth pitch up to: 24 mmSaw blade width up to: 6 mmGrinding wheel diameter: 150 mmGrinding wheel speed: 3500 rpm.Grinding wheel drive: 380 V, 0.55 kWusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC stop make de man type AST-1/0 / MSR 3Year 1995Support length: 3000 mmPad width: 200 mmWorking height: 800 - 1000 mmFeed rate: 22 m / minDrive power: 120 WWith- PC control MSR 3 with max. 1000 sentencesvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Welding turning device make PROTARC-ZAAR type RB-ASV 1000Machine -No: 5540 built in 1988Technical specifications:Load capacity: 10 tRoll diameter: 400 mmRoll width: 110 mmNumber of roles: 2 eachExternal dimensions (driven part): 3500 x 900 x 900 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm engine output: 2,2 kW bending speed: 5,3 m/min weight: 1360 kg range L-W-H: 2.320 x 900 x 1.200 mm Furnishing: - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - Digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suction nozzle diameter: 160mm; Nominal flow rate: 1300 m³/h; Bucket bag volume: 2 x 175 l; Filter cleaning: manual; Motor power: 2.2 kW; Dimensions: 1817 x 578 x 2115 mm (L x W x H); Weight: 74 kg; Universally applicable also for plastic, metal, glass, polystyrene, paper and the like Particularly robust construction housing made of galvanized sheet steel chip barrels are powder-coated paddle wheel fan for increased suction power Significantly reduced dust content due to double-woven fine filter bag extractors correspond to dust class L Basic units are pre-assembled in modular design Only short installation times for large systems Top price-performance ratio Short installation times due to modular design SCOPE OF DELIVERY System body with mounted fan unit 1 - 6 chip bags ASA 11 - ASA 21 Extraction unit with plastic impeller ASA 31 - ASA 61 Extraction unit with metal impeller sta ...

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We sell here a belt scraper from the manufacturer Weber, type ASB 600/2 in a very good used and functional condition. The machine runs on 400 volts, 0.7/0.85 kW, complete stainless steel, bandwidth 30 cm, rollable, workshop tested, ready for immediate use, dimensions B/D/H 80/110/120 cm, more on request.

; Gross weight [kg]: 40

: 1550 mm : 4,5 mm : 4,0 mm roll diameter: 140 / 210 mm : 2,2 kW : 1210 kg : 2650 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column crane, slewing crane, column slewing crane used Manufacturer: VETTER (presumably) Type: WIZARD AS10-5.0 (presumably) Year of construction 5/2006 Payload 1000 kg Swivel range 270° Projection from column: approx. 5.4 m, boom profile height approx. 37 cm Bottom edge boom to floor: approx. 3.8 m Total height: approx. 4.3 m Base plate diameter approx. 1.2 m The previous owner has mounted a smaller base plate. In order to really use the 1000 kg, a 1450 mm base plate must be mounted (as can also be seen on the type plate)

Screening machine GFA 25/60-3 Brand: GFA Type: ASA Screen area: length 6000 mm, width 2500 mm - 3 deckers Upper deck: screen opening [] 15 mm Middle deck: screen opening [] 8 mm Lower deck: screen opening [] 4 mm Drive: 37 kW electric motor Incl.: springs.

New glass depalletizer KHS type: Innopal Lord II ASN year of manufacturing: 2000 capacity. 30.000 bph with Siemens S 7 electric, incl. pallet transport and pallet magazine incl. sheet layer removal system The machine is depalletizing the empty bottles on a height at approx. 1.150 mm.