tornos 13 ca used for sale

Tool cabinet for bending tools pull-out drawers, allows the two-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated, in any colors of the RAL pallet -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) . number of drawers: 4 squares - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1050mm - mass of the faeces set in a drawer: compartment heahe on 210mm (is varriabel) technical height can be used in total without intermediate boeden 990mm compartment width usable 130mm depth usable 980mm - number of intermediate boeden: 3 stubs ; ready for use

Of used filter cake-cerium-smaller impulse: Springs a filter cake-cerium-smaller exists of two mutually running knife waves they chop up the filter cake.

Tool cabinet for bending tools Suitable for WILA/TRUMPF Tools or type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -extendable drawers, allows the two-sided access to the tools -arbitrary adjustment of the inserting roofs -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) run drawers Roller slide rails (serve as additional stabilization) - the cabinet can be disassembled - number of drawers: 4 sets - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1180mm - Mass of the Fa echer in a drawer: compartment hoehe set to 210mm (is varriabel) technical height total usable without intermediate boeden 990mm - specialist width usable 130mm depth usable 1100mm - Number of intermediate boeden: 4 Stueck / completely continuous; new ready for use

Spurt width: 980 mms edition height: 430 mms impulse: 0.37 kW auxiliary carriages in reinforced execution with Kippschaemel and running around role chain for model, with a hydraulic tiltable and adjustable Muldenschaemel for round timber, including cables and cable balance.

Of used filter cake-cerium-smaller a filter cake-cerium-smaller exists of 2 mutually running ones knife waves. according to medium a filter cake comminution at approx. 50-mm grain size can be reached.

This machine is particularly suitable for the processing of electric wastes with PVC, rubber, iron and lead. Processing of the cable pages at the same time. - cut the cable of 2 pages in diameters ranging from 30-150 mm - are is carried out in the two-blade system either both knife independently to adjust continuous or foot control can be set at Dashboard roles system to the Insert the cable in the machine fast and simple replacement of the MesserDurchmesser cable: 30 to up to 150 mmTrenngeschwindigkeit: 12 meters per MinuteAntriebsleistung: electric motor 6 KW / 380 VGesamtgewicht: 600 KgAbmessungen (Lxwxh) : 1800 x 1000 x 1200Anzahl of the blade: 2 StückMesserverstellung: mechanical

Downpour record Grey iron GGG50 1500 x 1500 chamber filter records Downpour records for chamber filter pressing 1500x1500 we can offer to you for almost all arrangements chamber filter records also in PP, filter cloths and spare parts almost all manufacturer.

Tool cabinet for bending tools / exhibition object suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg - for AMADA/Promecam tools -extendable drawers, allows double-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated -side fork rails for transport by forklift (cavity under the cabinet) -the drawers run on roller slide rails ( serve as additional stabilization) -the cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Fachbreite usable 130mm - Technical depth usable 980mm - Number of intermediate boeden: 3 stueck

We have 2 pieces control cabinet fans from Rübsamen & Mr Type: LS0, 20W, 0.14 A and 230V the dimensions are 240 x 240mm, one fan is unused = 12,-€ and one was briefly in use = 10,-€

Cardboard dimensions L min/max 200/650 mm W min/max 150/450 mm, H min/max 120/500 mm Working height 680 mm, format to be adjusted via hand crank, Folding the 4 floor flaps pneumatic operation 6 bar air Power 5-7 cycles /min - product-dependent

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Used eccentric screw pump Type: NM090SY02S12B Machine number: 355339 Built: 2004 Flow rate: 18/36 m3/h Pressure: 10 Bar Speed: 125/150 rpm pol switchable in 2 stages

Tool cabinet for bending tools suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allows the two-sided access to the tools -any adjustment of the inserting -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Tray width usable 130mm - Depth usable 980mm - Number of intermediate boeden: 3 stueck

Used eccentric screw pump Netzsch Type: NM090SY02S12B Machine number: 355338 Built: 2004 Flow rate: 18/36 m3/h Pressure: 10 Bar Speed: 125/150 rpm pol switchable in 2 stages

Used eccentric screw pump Allweiler TYPE: AEB2EN100-IE/011G0X Machine number: 7207538/1 Built: 2000 Q (Quantity): 8.3 / 100 l/min N (speed): 73 /457 rpm

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Used eccentric screw pump Allweiler TYPE: AEB 2 EN 100 - IE/011G Built: 2001 Q (Quantity): 8.3 / 100 l/min N (speed): 73/457 rpm Machine number:7209145/2

Used eccentric screw pump Nemo pump unit 4NE15A Built: 1997 Design: IMB3 Power: 0.75 KW Voltage: 230/400 V Speed: 624 rpm Machine No.: 284285 Direction of rotation: to the left, seen on drive shaft

Used eccentric screw pump Bornemann E2H 1024 Built: 1993 Power: 4 kW Voltage: 400/690 V Flow rate: 10 m3/h Speed: 370 rpm Viscosity: 10000CST Conveyor pressure: 2 bar Suction flange: DN80, top Pressure flange: DN65, axial Manual: yes Machine number: 329495

4 PCs. measurement and control cabinets with a swivelling frame and others with drawers and shrouds. Inside some with ventilation and with mounting plate. In frame door socket. Side panel with main switch. As Rittal IT units however incl. fittings. Size H/B/T 2000/800/550 The price is per measurement unit.

Filter cartridges

Fully automatic capsule sealing machine. Incl. PLC: Siemens-S5, type: 954, Operating controll: Lauer PCS 095. Format part for capsule size. 3. Output: up to 100'000 capsules/h. Furthermore incl. Visco system TRAWID VM, Sensor O.B.D, Control H, No. 04712479. The controll device is self made (Comp. Wetzel). Gelatin-vessel is A2/ double jacket, heatable with IKA stirrer RW 16- basic incl. agitator OPTI- Color, pump Watson - Marlow 505 S, two forward- and two backward pipe.

Many thanks for your interest on our Drop Rollers for hard candy, please find follow our offer: Type : Candy roller/ Drop Roller for Hard Candy, hand driven roller size. : approx 58mm x 177 mm Packing dimensions : approx. 630 x 580 x 450 mm (lxwxh) (wooden box suitable for export) Net Weight : approx. 65 kg. Gross weight : approx. 95 kg. Different: with one set brass drop roll round/egg shape without structure, round 300 other types possible. For every roll you decide for size, or you can give us your own form, Also available machine with working table, electrical engine and gear box. We offer this machine in as-is where it is condition delivery time: According to the arrangement ex warehouse Hess. Lichtenau

Used eccentric screw pump SMI - Ruhr pumps Series: SMI Size: 150 Year of construction: 2003 Capacity: 150 m m³/h maximum

CALIBRATING SANDING machine model LC 220 second hand machine volt.380/50 n.1 calibrating roller motor power Hp 6 carpet feed ( 2 speed ) motor power Hp. 0,5 / 0,75 max. working width mm. 220 max. working heigth mm. 150 belt dimension mm. 2020 x 240

Many thanks for your interest on our Drop Rollers for hard candy, please find follow our offer: Type : Drop Roller for Hard Candy with electr. Engine roller size. : approx 58mm x 177 mm table size : approx. 750mm x 620mm x 750mm (lxwxh) Packing dimensions : approx. 30” x 30” x 25” (wooden box suitable for export) Net Weight : approx. 200 kg. Gross weight : approx. 250 kg. Different: with one set brass drop roll round/egg shape without structure, round 300 other types possible. For every roll you decide for size, or you can give us your own form, Machine with working table, electrical engine and gear box. Also available, machine hand driven, without electrical engine We offer this machine in as-is where it is condition delivery time: appr. 8-12 Weeks after payment in our warehouse

Tetra Pak TCAP/21 1000 ml sl ReCap 3 Applicator We offer: Tetra Pak TCAP/21 ReCap 3 Applicator for 1000 ml slim line Tetra Pak beverage cartons, manufacturing year 2004 - in excellent condition - excellent serviced Available from stock Prior sales reserved

CALIBRATING MACHINE Mod. SAC SUERI CLS 1150 max. working width mm.1150 1 tape: roller diam. mm.300 Engine power hp 20

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystallizer. C ...

Candle filter VelaCart B750 Seitz-filter-Werke Type: VELAcart B750 - 16 H 07 DN 080 Year of construction: 1991 Fabriknr.: 1992 Filter usage: Candle Room capacity: 105 litres Operating pressure (bar): 10 liquid / gas 10 Permissible operating temperature (° C): liquid 85 / gas 85

Laboratory Candy pulling machine Application Sugar Pulling, Available 1 Kg, 2Kg & 5 Kg up to 50 Kg, the size of the engine is dependent on the size of the machine The action of the machine is derived from two driven arms rotating independently around a single fixed arm. The machine has one speed and pulling time can be set by means of a timer. The teflon arms are removable. This option is unique to this machine. It allows an easy cleaning. Safety guard automatic stopping with motor and starter Sugar Pulling Machine is mainly to aerated products like Chewy Toffees and others. This machine just stretch the gelatine based sugar mass and work air inside the batch. That avoid stickiness of the chewy Toffee at the teeth and give the product a spongee texture. The Machine is made for Laboratory trials and works batchwise, the product touching parts are made from stainless steel or te ...

3 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -4 Stand / 6 bars -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 150 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial custom ...

7 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -8 Stand / 28 bars -Traverse length 2.70 m -Load per level 2.4 tons -Shelf height: 3.70 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 150 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial customers from EU cou ...

Cat No. 14-0007 in a very good condition Measurements and Weight: WxHxD: 600 x 460 x 400 mm Weight approx: 44 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

11 fields pallets shelving (used) -Various manufacturers such as Polypal, Dexion, Metalux, Jungheinrich, Torri, Metasistem, and others -Used pallet racks note 1.5 -Stand 12 / 32 bars -Truss length 2.70 m (optional 3,60 m on request) -Load per level 2.4 tons -Shelf height 3.00 m deep 1.00 1.10 m -Disassembled and ready for loading -Safety pins -Load signs On request are surcharge ground anchor and Pad material offered. Attention: It is to used goods. Partial Signs of wear, but no security relevant dents like Stand driven to or Trussing! The magazine planners are careful to create only top quality / to put together. Should the above offer do not meet your needs, we create happy at short notice in writing (pdf. via mail) a quote if necessary including transport costs. For this, we need only your exact address or delivery address. See: your desired shelf there's also à la car ...

Various secure retirements for Canalis KS25 tracks, some with CEE and Sockets, partly for cable connection. Outlets with outlet fuses with machines or screw locks. Compl. Wired and ready for use. Finish request please inform. Questions to Manfred Raupp 0170 / 2204056 Mail to: fa.raupp@t-online

) Mortising depth 100 / 150 mm-) nominal no load speed 1/min - 4050) rated power 2500 W-) weight 8.7 kg-) universal motor 230 V / 50 Hz transverse stop best. No. 200954 1 Allen key 4 mm best. No. 093074 1 Allen key 8 mm best. No. 093070 1 connection cable 10 m best. No. 087612 â?¾Zapfenlöcher â?¾Materialeinsatz such as: Solid wood, laminated wood â?¾Ergonomische handle and switch arrangement - for safe, efficient and energy-saving work. â?¾Geringes weight - ideal for use on construction sites. â?¾Extrem powerful motor - for high efficiency and saving time. â?¾Einzigartiges light-weight 8.7 kg. â?¾Der long cross fence holder with large adjustment range allows you to work on large-scale wood. â?¾DAS clamping system in the LS 103 EC allows a quick chain change. Even a tighten ...

Manufacturer: Gertrud Diebels recycling machines Industry Cable Stripper Model: RMH 80 Diameter range: 1 up to 80 mm Drive: 1.5 KW/400 v

Electric drive Type R 08-20 Flatbed truck BJ. 03/95 10500 hrs Ready to go with Allgäu charger battery see type plate Errors and omissions excepted!

OHRA Kragarmregal NEW Negotiation price: € 1,760,-- net They offer on a shelf with a length of 4.5 m, consisting of: 4 stand with foot, 4 m high + 3 adjustable booms per stand (120 cm), load capacity 1100 kg/boom. Diagonal struts, stiffening and distances are included. Frame spacing 150 cm Arm length / boom 120 cm Load capacity 1100 kg / boom Load capacity per stand per side 3500 kg Over 100 meters available Heights of 2.5 m, 4 m or 6 m are available. Other compilations on request.

Automatic Horizontal Cartoner Marchesini MA 352. Continuous motion horizontal cartoner, suitable for high speed packing in cartons of small bottles , vials , drops . Entirely built with a balcony structure, this machine?has all features and advantages of Marchesini cartoners: carton magazine in an optimum position, maximum accessibility, extremely fast change-over times,?minimal maintenance. Possibility of collecting the various rejects (product, carton, leaflet) in different containers, allowing improved recognition and control of the rejected items and easier, safer handling of rejects. General features: Balcony construction fully compliant with GMP standards ?All feeding units located in ergonomic positions. ?Mechanical parts in an oil bath to reduce maintenance and limit noise ?Reliable and fast ?Simple, fast size change-over, can be performed entirely from the machine front ?Touch S ...

Comerio Ercole 1500mm wide x 550mm dia 4 roll inverted L calender. Peripherally drilled rolls (high pressure hot water heating), Motorised nip adjustment, Adjustable guides, Cross axis to roll 3, Unidrive gearbox with universal couplings. Motor power: Roll 1 and 4 - 50kW. Roll 2 and 3 - 60kW DC variable speed. Oil lubrication.

Kartonlaengslauf 10 to 25 cycles/min Hot glue manufacturer: servant

The Cartoner C 2205 belong to the continuous cartoners for the exible packaging of small and medium sized batches. Convincing attributes include the GMP and pharmaceutically compliant cantilever design with V2A stainless steel lining of the inner surfaces, the modular structure for subsequent upgrading of separate stations, as well as the consistent separation of the drive elements and operating assemblies. Thanks to the patented carton feeders TwinStar and TriStar, the cartoner offer uniform top quality and productivity – not only under ideal production conditions but also when cartons of critical quality are processed. The 5 pitch Cartoner C 2205 is designed for a maximum output of 250 cartons/minute with an option of up to 300 cartons/minute. The machine packages blisters, ampoules . Technical details : Max Output 250 cartons per minute Pitch 5” Max carton size (AxBXH) 100 x 90 x  ...

TOTAL LENGTH: 53798 MM, WIDTH: 10500 MM, HEIGHT: 10830 MM; CASSETTE INNER DIM.: 7500x1000x265 MM - L x W x H MAX. PROFILE LENGTH: 7500 MM, NO. OF CASSETTE PLACES: 294, DRVING SPEED: 100 M/MIN. LIFTING SPEED: 60 M/MIN.,

Attachment: eccentric screw pump used Manufacturer: Allweiler Series: AED 1E 4250 Year of construction: 2000 Working temp.: approx. 20 ° C Viscosity at tA: approx. 500 mpa.s Density at tA: approx. 1.0 kg / m³ Pressure in the pressure connection: 2-6 bar Speed: 62-310 1/min Flow rate: 30-180 m, m³/h Engine capacity: 45.0 kW

Cable Extension Sensors, WDS-40000-P200-M-S0, Miro Epsilon, new, Manufacturer: Micro Epsilon Type: WDS-40000-P200-M-S0 Measure length: 40000mm including test report Attention! We have set the lowest price for the new part on the market. We have other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.