tornos 13 ca used for sale

Meat grinder Laska WW 130-2, 130 mm angle grinder, 2-touring wolf, stainless steel version, load for 200 liters standard car, ergonomic operation, enlarged funnel with 295 liters

front mowers; Intermediate axle mower John Deere tractor for 2000 PTO

Arburg 520C-1300-350 (163) with bimetal plasticizing unit General information Item number: 163 Availability: In stock Year of construction: 1999 Brand: Arburg Specifications Spray weight: 194 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 520x520 mm Clamping plate size: 715x715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 95616 h Weight: 6380 kg Dimensions: 5.1x1.9 m Funnel: No Core train: Yes Euromap: Yes

Wide belt Sander Brand: Bütfering Model: AWS 3 Year of construction: 1989 Working width: 1350 mm 1 x Calibration roller 1 x Combi unit ( roller + grinding shoe ) 1 x Sanding shoe 1 x Cleaning brush Location of the machine: Customer location / Abroad

THREE-PHASE INDUCTION MOTOR MANUFACTURER: EBERLE MODEL: B 130 - L8 No. 075/0106 15 HP 11KW 60 HZ 870 RPM INCOME: 90.0% COS 0.70 IP/IN 5.1 ISOL. F CAT. N REG SL IP 55 FS1.15 BEARING - INTERV. LUB - QT GREASE - TYPE OF GREASE LA 6311.03 20,000 HS 20 g POLYREX LOA 6311.03 20,000 HS 20 g MASS 134 KG

2 Head Paper Drilling Machine

Handy hydraulic punching bracket with 70mm projection. Maximum punching capacity Ø24mm in 16mm steel. A double-acting hydraulic unit with a maximum printing capacity of 700bar. This new machine comes from a warehouse clean-up. Additional punching tools would be sold separately.

Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes

Pipe furnace with 5m long furnace section for heat treatments under inert gas atmosphere. Tmax: 1300°C On the Nabertherm website you can see a product video of this unique stove. It was originally operated vertically as a downpipe furnace. A horizon-wide use is of course also possible. The structure is clear: It is a nearly 6m long truss-like frame, on which six oven case elements are attached. These are hinged and inside runs the almost 6m long pipe made of Kanthal APM. Each furnace element has two thermocouples type S (platinum/rhodium). Kanthal APM is very resistant to oxidizing atmospheres.

Arburg 470S-1300-350 (170) Hybrid with electric worm drive, without funnel General information Item number: 170 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Spray weight: 127 g Clamping force: 1,300 kN Screw diameter: 35 mm Spray pressure: 2500 bar Spar spacing: 470 x 470 mm Clamping plate size: 650 x 650 mm Tool installation height min.: 275 mm Control: Selogica Language: German Power: 33.9 kW Operating hours: 85,400 h Weight: 5,100 kg Dimensions: 5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Cytotocix safety cabinet for personnel and product protection.

S131GH Metal band saw Motor: 230V 1.1kW 50Hz Feed infinitely adjustable Band saw blade speed: 22/ 31/ 55 m/min Band saw blade 1638x13x0,65 mm Cutting angle -45° to 60° Dimensions 1085 x 498 x 978mm Net weight 78kg G&STÜ-3300131

Laska W 130 Automatenwolf Perforated disc 130 mm Filling quantity approx. 1 to 2 E 2 boxes Drive 7.5KW 400 Volt 50Hz

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aerospace telephone system, radio network -Manufacturer: Cisco, Aironet BR1310 -Type: AIR-BR1310G-E-K9-R -Dimensions: 205/205/H80 mm -Weight 1.1 kg

Automatic Winkel Wolf KILIA set with built-in option Automatic Lifter for carts type Laska 200 liters for automatic filling. Manufacturer Germany. The machine is completely factory refurbished with 1 year warranty.

AUTOMATIC WINKEL WOLF KOLBE-ALEXANDERWERK 130 mm The machine is completely factory refurbished by MM SERVICE EOOD with 1 year full warranty.

220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition

Double head Standing model with hand lever adjustable side stops Several paper drills fixed hole spacing standard 80 mm

Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor -Manufacturer: RS/Arcol power resistor HS300 47R J -Type: 136-323 47R J -Power: 300 W -Dimensions: 180/70/H40 mm -Weight: 0.6 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: TAE, Transformer -Type: 6 D 130/50-10 -Number: 4 pieces available -Price: per piece -Dimensions: 110/105/H145 mm -Weight: 6,0 kg

electric motor, three-phase motor -Manufacturer: MEZ, electric motor from milling machine TOS FB25-V -Type: AP 132S/4 -Power: 5.5 kW -Speed: 1460 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection rating: IP44 -Dimensions: 490/350/H300 mm -Weight: 73 kg

clamping force: 1.300 kN injection volume: 230 cm³ screw diameter: 45 mm platen size: 685 x 685 mm Condition: used, Specification: injection moulding machine for TPE - used including Koch dosing unit clamping unit: - clamping force: 1.300 kN - heating platen size: 685 x 685 mm - Clear distance between tie bars: 470 x 470 mm - Mould installation height min.: 250 mm - Distance between platens max.: 900 mm - Opening stroke max.: 650 mm - Ejector stroke: 225 mm Injection unit: - Screw diameter: 45 mm x 18D - Injection volume max.: 230 cm³ - Injection part weight: 210 g/hp - Max. injection pressure: 1,670 bar - Screw circumferential speed: 75 m/min - Cylinder heating: 4x 2,200 W - Nozzle heating: 600 W - Connection value: 3x 400 V, 50 Hz - Electrical connection (back-up fuse): 100 A - Weight approx.: 6,3 ...

Hydraulic press Pellegrini Hot water Pressing area 4000 mm x 1300 mm manual glue application incl. Insertion table Acceptance: Vacuum - Gantry forklift SIRIO

S. No.: 12991843 // Power : Up to 13,000 #10 envelopes/hour in draft quality Up to 13,000 #10 envelopes/hour in letter quality Up to 12,000 #10 envelopes/hour in executive quality Image Area: 9.4" x 15" (23.876 x 38.1 cm) Equipment / Additional information: Media Size: Width: 3” minimum to 12.25” maximum Length: 5” minimum to 15” maximum Thickness: Up to 1/4" (subject to weight) Print Resolution: 150, 200, 300, 600 dpi horizontal, 600 vertical Print Modes: Draft, Letter, Executive Documentation

Hydraulic filter, filter element -Manufacturer: Hydac, filter element OVP -Type: 1300 R 040 AM -Dimension: Ø 144 x 483 mm -Weight: 4 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Hollow shaft: Ø 40 mm -Dimension: Ø 130 x 80 mm -Weight: 5.5 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Angle: 90° -Dimensions: 55 x 133 mm, see drawing in the photos -Length: 365 mm -Weight: 9.8 kg

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit -Manufacturer: VEM, hydraulic unit from Dorstener APE80-3050 press brake -Drive: VEB Type KMER 132 AC P 7.5 kW 1435 rpm -Flow rate: l/min -Operating pressure: bar -Dimensions: 720/340/H335 mm -Weight: 87 kg

Three-phase motor with 2 speeds, electric motor -Power: 4/6 kW -Speed: 720/1440 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 510/300/H350 mm -Weight: 77.5 kg

Synchronous motor, MAC117D-0-FS-4-C/130-B-1/WI522LV, R911232504, Rexroth, refurbished-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The synchronous motor was completely reconditioned by Bosch Rexroth and is therefore in mint condition. - Synchronous motor, permanent magnet motor - 600 V / 3 pol. - 4000 rpm - 23 Nm - 53,2 A - 29 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type KRA 132 3/4 -Power: 7.5 kW -Speed: 1450 rpm -Shaft: Ø 32 x 80 mm -Construction: B3 -Protection class: IP44 -Dimensions: 525/340/H265 mm -Weight: 80 kg

Roll jaws, floating center jaws, pull-down jaws, machine vice jaws, reversible jaws -Ground reversible jaws: 135 mm -Hole spacing: 80 mm/groove: 3 mm -Price: per piece -Number: 4 pieces -Dimensions: 135/16/H40 mm -Weight: 0.6 kg/piece

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 132 teeth -Number: 19x saw blades available -Price: per piece -Weight: 10,1 kg/piece

Feluwa - Pump Condition: functional We can also offer general renovation on request. Spare parts are still available. If you have any questions, please contact us.

Electric motor, three-phase motor -Manufacturer: VEM, electric motor from milling machine WMW HECKERT FSS 315-V -Type: KR 132. 1/2 -Power: 5.5 kW -Speed: 2870 rpm -Shaft: Ø 32 x 80 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 470/340 / H410 mm -Weight: 74 kg

Three-phase motor, electric motor -Power: 5.5 kW -Voltage: 400/690 V -Speed: 1450 rpm -Shaft: Ø 38 x 80 mm -Protection class: IP55 -Dimensions: 450/260/H330 mm -Weight: 43 kg

Labeller, make Krones, type: Universella 600-15-8-6-130, 2 aggregates for cold glue label at body, shoulder, back; Videojet dating built 1995

5-Axis Horizontal Machining Centre MCM Tank 1300 5-AXIS New in 2017 Siemens 840D solution line Twin pallets 630 x 800 mm Work weight max. 1500 kg NC rotary table - 4th axis B-Axis 360° / 0.001° NC-Tilting head 5th axis A-Axis +80°/-95° / 0.001° X 1300 mm Y 1400 mm Z 1400 mm Feeds and rapids to 50000 mm/min. Spindle drive 40/52 KW Spindle speeds to 10000 rpm Tool taper ISO 50 199 tool ATC Linear scales for higher accuracies Renishaw sample Chip conveyor CTS 65 bar Beautiful machine – excellent condition Operating hours 11544 - 05/2020) Spindle Working hours 6784 (05/2021) Inspect under power Proposal Number MH-6155

Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Lashing eyes: attachment points, 43 pieces for screwing or welding -Material: stainless steel -Dimensions .: 100 x 138 x 10 mm -Eyelets: 60 x 30 mm -Bores: Ø 18 mm -Price: complete -Weight: 32 kg

Brake shoe set, wheel brake, brake set -Manufacturer: Knott, wheel brake type 16-1369 -permitted Weight: 450kg - Bolt circle: Ø 100 mm -Price per piece - Quantity: 17 pieces -Dimension: Ø 185 x 195 mm -Weight: 9.1kg/pcs

Ground precision ball screw, 80270, D50mm, 1300mm, Honsberg, new As good as new in original packaging! The high-quality part comes from a spare parts warehouse of a mechanical processing of a large automobile manufacturer, is completely new and in the original packaging. Attention: We have many, bearing, high-quality ball screws in different designs in diameters 32, 40, 50, 63 and 83mm. Take a look at our website of IPV GmbH. ball screw, ball screw, ball roller spindle, Type 80270, D50 mm, 1300 mm, Fa. Honsberg, ball screw diameter 50 mm, pitch 10 mm, Thread length 1080 mm length of ball screw nut 142 mm, total stroke 938 mm, Total length of the spindle 1300 mm Diameter for coupling with motor 30 mm Diameter bearing seat A 35 mm, diameter bearing seat B 35 mm Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. Howe ...

Brake shoe set, wheel brake, brake set -Manufacturer: Knott, wheel brake type 16-1369/1 -permitted Weight: 450kg - Bolt circle: Ø 112 mm -Price per piece - Quantity: 49 pieces -Dimension: Ø 185 x 195 mm -Weight: 9.1kg/pcs

Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws -Manufacturer: Schunk, soft top jaws 1 set = 3 pieces -Type: SWB-FR 131 -Dimension box: 75/90/H50 mm -Weight: 1.1 kg

Manufacturer: BATTENFELD Type: HM 1300-9200H-7700H-BM Control: UNILOG B4 Clamping force: 13000 kN Year of construction: 2005 Technical data closing page: Drive type: fully hydraulic Closing type: Full hydraulics Type: four-spar Clamping force: 13000 kN Tie bar size h: 1600 mm Tie bar size v: 1250 mm Panel size h: 2220 mm Panel size v: 1880 mm Installation height min: 1000 mm Installation height max: 1800 mm plate spacing max.: 3850 mm Opening distance: 2850 mm Ejector stroke: 350 mm Ejector force: 165 kN Centering movable plate D: 315 mm Centering fixed plate D: 315 mm Technical data spray side: Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1630 bar Screw length: 22 l/d Plasticizing current: 144 g/s PS The technical data of the 2nd injection unit are as follows: Injection unit II 7700 Screw diameter 100 mm, Specific spray pressure 1960 ...

Mixer-grinder 130 mm Type: Seydelmann ME 130 Completely made of special stainless steel Hole plate diameter: 130 mm Hopper capacity: about 170 l Throughput depending on material type, speed, cutting set up to 3000 kg/h One-speed mixing mechanism 2-speed working worm Machine dimensions in cm: Width: 90,0 Depth: 120,0 Height: 136,0 Installed power: 18 kW Voltage: 380 V, 50 Hz Machine weight: 680 kg

Automatic Angle Grinder 130 mm Completely made of special stainless steel Speeds: 2 of the working worm and 2 of the feeding worm Holeplate diameter: 130 mm 400 V, 3 Ph, 50 Hz Hopper capacity approx. 130 liters Cutting set consisting of: 2 knives, 1 kidney plate, plates with hole diametrs 4 and 13 mm Machine dimensions in cm: Width: 125,0 Depth: 110,0 (120,0) Height: 135,0 (185,0) Installed power: 18,0 kW Voltage: 380 V, 50 Hz Machine weight: 680 kg

Mixer-grinder 130 mm Type: Seydelmann ME 130 Hole plate diameter: 130 mm 2-speed working worm 1-speed mixing paddle motor, approx. 1,5 kW with 2 mixing arms, independent of working worm, Hopper capacity approx. 170 litres (mixing capacity approx. 100 kg) Machine width: 90,0 cm Machine depth: 117,0 cm Machine height: 140,0 cm Power of motor: 18,0 kW Voltage: 400 V, 50 Hz Machine weight: 680 kg

spindle diameter: 130 mm x-travel: 6000 mm y-travel: 1750 mm z-travel: 600 mm w-axis: 800 mm spindle taper: SK 50 control: Siemens 8M type: 8M mm table surface area: 1500x1300 mm Table load: . kg turning speeds: . U/min spindle motor: . kW feed: . m/min chip conveyor: coolant: x-travel: mm total power requirement: . kW weight of the machine ca.: 75 t dimensions of the machine ca.: . m Tool magazine: 60 toolsThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of ...

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: Pacoma, single-acting hydraulic cylinder, 133 mm stroke -Type designation: 3483441M91 43 L 01 -Cylinder: outer Ø 75 mm -Piston rod: Ø 60 mm -Dimensions: 325/75/H120 mm -Weight: 8.6 kg