tornos 13 ca used for sale

A CadCam CO2 laser cutting machine for the textile, wood, paper and plastics industries is available. Working dimensions X/Y: 2000mm/3000mm, max. axis speed: 1m/s, acceleration: 2G. Including various accessories. Documentation available. On-site inspection is possible.

Refrigerant: 407C, connected load: 84.8kW, length: 1066mm, width: 695mm, height: 1698mm, weight: 1.367t. On-site inspection is possible. No known defects.

A small screen printing machine and a spray booth for print pre-treatment are available. 1) Screen printing machine (orange machine). 2) Spray booth SER.TEC. s.r.l. Cabina S / Apply Eco, year of manufacture: 2014. The system was only used for test purposes, as a print changeover took place. Documentation available. On-site inspection is possible.

Output: 1000/min, number of cameras: 2. On-site inspection is possible.

A Cookson dispensing machine for the SMT industry is available. Dispensing capacity 50 mil pitch solder paste: 25000 dots/h, dispensing capacity 3mm pitch SMD adhesive: 22000 dots/h, dispensing range X/Y: 450mm/450mm, travel X/Y/Z: 483mm/483mm/55.8mm, feed X/Y: 406mm/s, SMEMA compatibility: available. Including spare parts, seals, hoses etc. Documentation available. On-site inspection is possible.

Load capacity: 500kg, reach: 2750mm, swivel range: 360°, foundation column weight: approx. 3000kg, tare weight: approx. 3350kg. Documentation available. On-site inspection is possible.

: 1860 m³/h : Pressung 2.900 Pa : 1,1 kW filter surface area: 10 m² : 72 dB(A) : 400/50 V/Hz : 665 x 1100 x 1495 mm : 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system --------------------------------------- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class W3 (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good clean ...

turning diameter: 380 mm turning length: 700 mm control: SIEMENS spindle turning speed - stepless: 2500 U/min tailstock quill taper MT: 4 weight: 1.5 t dimensions of the machine ca.: 2000x1400x1820 mmxmmxmm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Upstroke press Top lid can tilt open to allow mould to be (un)loaded Capacity: 150 ton Passage between uprights: 1850 mm Max ram adjustment: 500 mm Distance between table -- ram: 1000 mm Table area: 1800 x 1300 mm Height: 2350 mm

A coolant separator is available. Volume flow: 4000m³/h, total pressure: 2000Pa, power: 4kW, connection diameter: 75mm, material: stainless steel. Documentation available. On-site inspection is possible.

Key data: 2000 KW, 400 V

Caterpillar G3516H, 2000 kW, 400v. 50 Hz NEW Caterpillar G3516H, 2000 kW, 400v. 50 Hz NEW Caterpillar G3516H, 2000 kW, 400v. 50 Hz NEW Caterpillar G3516H, 2000 kW, 400v. 50 Hz Ten (10) New Caterpillar G3516H, 2000 kW, 400v. 50 Hz. Natural gas generator sets. These 2500 kVA units are set for continuous an parallel to gird applications. They come with a prelube pump, Jacket Water Heater, no CSA or EU certifications, 4.3 EMCP control panel, 1800 frame generator, open skids Manufacturing year 2023 & 2024.

Manufacturer: Chiossi e Cavazzuti Model: Poker 1200 Year of Manufacture: 2023 Type: Oven for drying water-based and plastisol inks Power: 38 kW Phases: 3P + PE Current: 58 A Voltage: 400 V Frequency: 50/60 Hz Weight: 1400 kg Find more here - / Contact us at -

Manufacturer: Sebia Model: Capillarys 3 Tara CAPILLARYS 3 TERA delivers the enhanced performance of a 12-capillary system and can be upgraded to an MC configuration by adding 1 to 3 CAPILLARYS 3 TERA units to a tube loader (528 positions). It offers a broad range of techniques for myeloma, diabetes, hemoglobinopathies, and chronic alcohol abuse. Find more here - / Contact us at -

Fully automatic capsule filling machine for powder or pellets in capsules of size 000 - 5. Along with the main machine, various additional modules and machine enable a fully automatic filling process. Included: material hopper, capsule hopper, vacuum feeder, capsule feeder, industrial dust collector, capsule polisher, metal detector, collecting hopper (final product). ? Specifications: suitable for capsule size: 000 - 5 | segment bores: 25 | max. speed of the machine in neutral: 140 cycles/minute (corresponding up to 3500 capsules/minute) | main machine dimensions: L1555xW1165xH2040 mm | main machine weight: 2200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks ...

Sample system for filling liquids into bottles, closing them with a twist-off cap and then bottles labelling. Complete system consisting of: Bottle unscrambler | Filling machine with 4 filling heads for liquids with high or low viscosity | Lid closing machine for different sizes and shapes of lids including lid unscrambler | Labelling machine for bottles/cans/containers made of glass or plastic | Collecting table. The individual machines of the packaging line are connected to each other via conveyor belts, which gives the installation of the line high flexibility. -Specifications: Number of filling nozzles: 4 | filling range: 100-1000ml | dosing method: by piston pump | accuracy: +/- 1% | bottle height: 15-400mm | bottle diameter: 25-200mm | speed: max. 1000 bottles/hour | label size: L25-300mm, W20-180mm, product contact parts are made from 304 stainless steel. Dimensions and total weig ...

LABELshrink tunnel. Basic version with conveyor for smoothly shrinked labels on caps only. For bottles/cans/glasses without any corrugation. Two blowing motors for low and turbo air blowing. - Specificationen: max. product size: ? 120xH400mm | tunnel size: L1000xW150xH400mm | machine dimensions: L1530xW400xH1300mm | output: up to 200 bottles/min | power: 380V, 9.0kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

• Load capacity 70 kg • Fork mount with rectangular tubes, tube centre distance 368 mm, tube length 435 mm • Lifting height max. 1,540 mm (floor to lower edge of tube) • Parking brake • Mobile • Next VDE test 03/25 • Electrically rechargeable with charger 230V/50Hz

Caterpillar C7.1 - Unused - 425 HP - GJN

Used Seawater Pump C32 / 3412

with 4 capping heads Type: 97 Capacity: approx. 8,000 - 10,000 bph

Key data: 1470 mm, 1400 mm, 750 mm

2 Cast iron V supports Width: 1400 mm Height: 1370 mm Base depth: 750 mm Slot width: 200 mm V width: 940 mm V depth: 430 mm Total height under sole: 1470 mm Weight: 2,3 T / unit

Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Caterpillar 3406 DI-T - Used - 187 kW - 6TB

Caterpillar 3306 - Used - 176 HP - 64Z

Leather splitting machine Camoga C 520 L with 50cm working width

Leather splitting machine Camoga Cn 412 with 40cm working width

Key data: 1200 KW

Capacity 1200 kw Containerized 50Hz , 400V, 1732 A, Gas type natural gas Working hour 15.000 hours Marelli MJB 450 type generator

An old rectangular ball mill for barrel and dip finishing of mass-produced articles is available. Process: Deslagging/deburring, filling weight range: approx. 30kg-50kg, drive: belt-driven, machine length: approx. 1200mm. On-site inspection is possible.

Afrolmachine 5 ton Middenhoogte: 1300 mm Spoellengte: max. 1100 mm Decoiler is verplaatsbaar, gemonteerd op chassis Laadwagen is vast gemonteerd op chassis

Technical specification, CBR A3, FEATURE VALUE, POWER 5.5 KW, CABLE DIMENSIONS 1-120mm, CUTTING SPEED 25 meters/min, LENGTH 1240mm, WIDTH 780mm, HEIGHT 1330mm, WEIGHT 480kg, cable stripping machine, CBR A3 cable stripping machine is specially designed to remove the outer insulating material from cables of all sizes, allowing the conductive material inside to be easily removed. This series offers excellent performance on steel armored cables (SWA), double steel armored cables, steel tapes, PVC coated cables, lead coated cables, thick rubber coated cables, nylon coated cables, low grade cables, TT cables and more. Specially machined blades with unique design enable cutting and stripping of cables of any length for a long period of time without the blades becoming blunt. All electrical and electronic components of CBR A3 series are Siemens brand. Our products are manufactured and certified  ...

M.Bäuerle CAS 52 overpass; cleaned and tested; suitable for folding machine CAS 52; Working width 520mm. M.Bäuerle CAS 52 bridge; cleaned and checked; used for folding machine CAS 52; working width 520mm.

Key data: 1200 KW, 1788 kVA, 660 V

Caterpillar CG170-v12 0-hours after overhauling! New:ALL liners, piston rings, bearings, gaskets, filters, ect. total running hours engine: 31.000 1200kw 1800kva year 2013 all documents scope: genset on frame control panel breaker panel Gasline pomps transformer

Offered are,Used aggregates 4x aggregates TCG2020V20 from 2009 with mileage of 34000 to 45000 hours. Price 165.000,00 Euro 6x container aggregates built from 2011 to 2014 mileage 22000 to 35200 hours Price 215000,00 Euro Plants are located in Asia.

Manufacturer: Cascade Model: 11000 Probe Station Five (5) Manipulators: - 1× MH-2 with magnetic base - 4× Vacuum-base manipulators: - MH-0307-52 - MH-2 - MH-7267-46 - MH-0307-14 Three (3) Pico-Probe Power Supplies: - Two fully functional - One for parts or repair Four (4) Pico Probes Assorted DC Probe Tips – Variety of tip styles included for different probing needs. TMC Micro-G Table (Model 63-511) – Precision vibration isolation table for enhanced measurement stability. Find more here - / Contact us at -

Folding machine MB multipli-cas 524 Serial-No. 78261

Rollen-Laminiergerät / Roll Laminator Cold/Hot GBC CATENA 35 Year 2019 - Serial-No. PCG0226 Formatbreite / Size width max. 650mm Heiß-/Kaltlaminierung / Hot and Cold lamination Specifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 330mm Anti-Jam Technology Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 685 x 330 x 457mm Weight 37.8kgs

CAMAM oscillating mortiser with 2 benches mod. MO/2A - 4 spindles -Volt. 380/50 - Matr. 145

CAMAM longitudinal sander mod. LOL/75/RU

CAMAM orbital sander mod. LEC250 – CE compliant - With feeds - Matr. 11 - Year 1996 - Working dimensions min/max. 30/150 mm. - Min. radius of curvature mm. 250

Several original new and reconditioned turbochargers and cartridges for Caterpillar engines type 3300 / 3400 / 3500 / C 18 / C32 and older type's perfect machinery international bv the Netherlands info@perfectmachinery.nl Whatsapp +31 653549259 the Netherlands Whatsapp +34 682511830 Spain

Used grinding machine Vollmer CABG 50U – built in 1995 – Very good condition For sale is a fully automatic gang saw sharpening machine from the quality manufacturer Vollmer. The machine is in very good condition, is fully functional and can be used immediately. Ideal for sawmills or woodworking companies with regular sharpening needs. Specifications: Model: Vollmer CABG 50U Year of Make: 1995 Machine Type: Automatic Gang Saw Blade Sharpener Condition: Very good, regularly serviced Saw blade width: Up to approx. 200 mm Saw blade length: Up to approx. 1650 mm Rake angle adjustment: Approx. -10° to +25° Tooth pitch: Adjustable (depending on the type of saw blade) Abrasives: CBN or diamond grinding wheels Grinding cycle: Fully automatic incl. infeed and return Control: Electronic with program selection Cooling: Integrated coolant supply Connected load: 400 V / 50 Hz ...

Ice cream machine from carpigani, in working order.

2000/2200 KVA at 50 Hz, 2500/2750 KVA at 60 Hz, Power (KVA): 2500, Working hours: 46, Frequency: 60 Hz, Voltage: 3300 V

We have 2 complete controllers (built in 2006) with all cards for Cathild drying chambers. Sale is possible in a package or individually.

Hydraulic 30 ton C-Frame Press CAVENAGHI & RIDOLFI Nominal Power : 30 ton Year of manufacturing: 1982

Hydraulic 30 ton C-Frame Press CAVENAGHI & RIDOLFI Technical data Nominal Power : 30 ton Year of manufacturing: 1973

Hydraulic 60 ton C-Frame Press CAVENAGHI & RIDOLFI Nominal Power : 60 ton Year of manufacturing: 1975

6 Axis Robot Servo Controller,Drive, Motion Control, Servo Pack, Servo UnitServo Unit for YASNAC XRC UP6YASKAWA / MOTOMAN Type CACR-UP6AACO/N RA8616-0Y4A-46S/N: D000Z2676590046Version: 6 Axis Module for Robot- Suitable for YASKAWA / MOTOMAN / YASNAC XRC UP6- Interface USB Power Supply Type JUSP-RCP01AACAnmity W x H x D: 270 x 310 x 200 mmWeight: 8.5 kgUsed, very good condition; used

Manufacturer: Canon Model: C10000VP Combined total of all pages printed (color + B&W) : 15516806 General Specifications Warm-up Time Less than 420 seconds from power-on. Interface Type - USB 2.0 Hi-Speed - Ethernet: 1000Base-T / 100Base-TX / 10Base-T - Standard: 2 USB host ports Network Protocols No print function Processor Speed 1.66 GHz (SOC ARM 1136JF-S 400 MHz, ARM 946 200 MHz) Memory 1.5 + 2.0 GB Hard Disk Drive Standard 250 GB hard drive Control Panel (EFI/Canon PS/PCL) Tilted Control Panel F1: 10.4-inch (26.4 cm) SVGA color TFT touch screen with LED backlight Control Panel (PRISMAsync) A4 Control Panel: 15-inch touch screen Dimensions (W x D x H) 2586 mm x 1152 mm x 1456 mm Installation Dimensions (W x D) 2586 mm (W) x 1971 mm (D) Weight Approx. 1200 kg Operating Environment - Temperature: 20 to 27 °C (68 to 80.6 °F) - Humidity: 15% to 60% relative hum ...