tornos 13 ca used for sale

Key data: 1300 kN

Arburg 520S 1300-800 / Machine in very good technical condition Year of Make: 2008 Injection unit: Screw diameter: 50 mm Injection weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 130 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air Valve x 2 Hardened injection unit - Bimetal The machine was regularly serviced by the authorised service Arburg in Germany Dimensions: Weight: 6450 kg Length/Width/Height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or ...

Arburg 420C 1300-675 with the Star Sprue Picker Year of Make: 2002 Injection unit: Screw diameter: 50 mm Injection weight: 297 g Spray pressure: 2080 bar Dosing volume: 353 ccm Clamping unit: Clamping force: 130 t Spar spacing: 420x420 mm Size of the clamping plates: 605x605 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 2 Hydraulic core pull x 2 Hardened injection unit - Bimetal Type of injection unit: Vario - This offers the possibility of using the injection unit, e.g. for side spraying Covers from the operator's side open automatically Dimensions: Weight: 4330 kg Length/Width/Height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All offered machines are started by our service technicians before they are sold. It is poss ...

Arburg 1500T 3200-1300 e² / Hybrid machine with a turntable Year of Make: 2011 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Spray pressure: 2000 bar Dosing volume: 664 ccm Clamping unit: Clamping force: 320 t Spar spacing: 0x0 mm Size of the clamping plates: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Hardened injection unit - Bimetal Main motor of the machine – servo motor driven by inverter Very precise rotary table, driven by a servo motor, controlled by an inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment ...

Arburg 630S 2500-1300 ECO / Production line with the Sepro Industrial Robot SDR 22S Year of Make: 2008 Injection unit: Screw diameter: 55 mm Injection weight: 521 g Spray pressure: 2380 bar Dosing volume: 570 ccm Clamping unit: Clamping force: 250 t Tiebar spacing: 630x630 mm Size of the clamping plates: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners x 15 Hardened injection unit - Bimetal Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) ECO – the machine has a system for adjusting the minimum tool height Robot - Sepro Industrial Robot SDR 22S Year of Make: 2016 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-150 ...

Centrifugal pump, motor 1,1kw, Impeller size 130mm, max 18bar, 33m3/h 2800rpm, inlet/outlet 51/51mm

Mosca pallet press complete with conveyor technology Type: KPM 131 Year of Make: 1996 Control: S5 (conversion to S7 possible) Passage width: 1200 mm max. Flow height: 1500 mm max.

M. No.: 43954 Equipment / Additional information: Vacuum: 20 mbar Motor Oil: Type SAE 30 Qt.: 6 Ltr.

SCM calibrating machine model SANDYA 20 RRR 135, with 3 belts: -1st belt with roller D=250mm in grooved steel -2nd belt with roller D=250mm in 55 shore rubber -3rd belt with rubber roller D=320mm in 35 shore rubber - 3-belt motors: KW 15 + 11 + 8.8/11 2 speeds - pneumatic on/off exclusion of the groups, from the control panel - pressure shoes on all 3 rollers - development of abrasive belts 2620mm - Electronic oscillation of the belts, for lower air consumption - automatic table positioner, with digital measurement reader - Advancement mat in good condition - pneumatic belt centering - Feed speed variator - inlet and outlet support roller conveyor Machine according to CE standards, year 1999 VISIBLE INSTALLED AND OPERATING UNTIL JUNE 2026

- 3 rolls driven - 2 lateral guide rolls - Digital readout for position rolls - Set hardned universal rolls - Set hardned profile rolls

Edge banding machine Type: Sprint 1317 Manufacturer: Holz-Her Year: 2006 Edge Control with 18.5" 16:9 color touch screen rotary control panel, memory for programs, motorized adjustment of the pressure beam, feed using a transport chain, feed 8–18 m/min extendable support surface for workpieces Trimming milling unit 1961, diamond cutting cutter in right- and left-hand operation, automatic adjustment to the height of the workpiece Edge feeding 1903 Pre-cutting up to 3 x 45 mm (depending on the material) Adhesive system 1905 Multi-System automatic adjustment of the glue height using the touch nozzle, Pressure regulator for adjusting cartridge pressure, the possibility of using PUR adhesives, pressure device 1913 MOT, 1. cylinder driven Trimming unit 1918 with pneumatic adjustment Pneumatic cut-off saw rotating Multifunctional unit 1824 MOT 4 with a multifunctional ...

7 assen: Y1 / Y2 / X / X2 / Z1 / Z2 / R Amadabombeertafel met Digipro-optie: CNC-buighoekmeetsysteem Sick laserbeveiliging aan de voorkant Plooimessen in een gereedschapskast: • 00300 – 60° - R6.0 2x 835 • 04706 – 88° - R0.6 4x 835 • 05206 – 88° - R0.6 10, 15, 20, 40, 50, 100R, 100L, 200, 300 • Z24511 – 45° - 0,37° 4x 835 • Z24512 – 45° - 0,37° 415 • Z24513 – 45° - 0,37° 10, 15, 20, 40, 50, 100L, 200, 300 • 45308 – 88° - R0.8 10, 15, 20, 40, 50, 100R, 100L, 125, 138, 200, 270, 300, 310, 370, 835 Buigmatrijzen in een gereedschapskast: • 07900 – 88° - V20 4x 835 • 07980 – 88° - V20 10, 15, 20, 40, 50, 100, 200, 400 • 07700 – 88° - V16 4x 835 • 07780 – 88° - V16 10, 15, 20, 40, 50, 200, 400 • T12451 5x 835 • 129001 5x 835 Capacity: 130 ton x 4100 mm Backgauge: CNC Control: AMNC-PC Touch Passage between uprights: 3760 mm Max ...

pressure: 135 t bevel length: 4000 mm distance between columns: 3150 mm column arm: 270 mm total power requirement: 15 kw dimensions: 4030 x 1440 x 2420 mm machine weight ab.: 9500 kg Equipment: - MNC 10 control unit - Electric backgauge ( X ) - Positioning of the depth adjustment ( Y1 Y2 ) - 2 stop fingers, manually adjustable - Rear side guard - Upper and lower tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 t chamfer lenght: 3060 mm distance between columns: 2690 mm column arm: 410 mm stroke: 365 mm dayligth: 535 mm ajustment speed: 200 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec table width: 120 mm table height: 1050 mm tiltable up to: +/- 10.0 mm Number of working hours: ca. 31.800 h compressed air: 5.0 - 7.0 bar oil volume: 250 l operating pressure: 340 bar voltage: 400 V total power requirement: 23.0 KVA weight of the machine ca.: 12950 kg range L-W-H: 3660 x 2310 x 2900 mm Equipment: - CNC electro-hydraulic folding/die bending press - DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tools and products library Graphical 2D programming automatic bending sequence calculation and collision detection EMERGENCY stop button at the front - CNC axis adjustment: Y1 - Y2 - X - R ax ...

spindle diameter: 135 mm x travel: 3000 mm y travel: 2000 mm - Z-axis travel: 1600 mm travel -w axis: 700 mm TABLE: table-size: 2000 x 1800 mm table load: 10 t B-axis (table): 0,001 ° MILLING SPINDLE / HEAD: - spindle revolutions (max): 5 - 2000 U/min - spindle diameter: 135 mm - tool fixture: ISO SK 50: BT 50 TOOL MAGAZINE: - number of positions: 40 feed: 1 - 4000 mm/min rapid traverse: 8 m/min control: Fanuc 16i-MB total power requirement: 42 kVA weight of the machine ca.: 37,2 t dimensions of the machine ca.: 6,3 x 6,9 x 4,79 m equipped with: - CNC Control Fanuc 16i-MB - NC-Rotary Table 1800x2000mm - ATC 40-fold (BT 50) - COOLANT THROUGH THE MAIN AXIS - Chip Conveyor - CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x2070x1135 mm Weight: 320 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 6500 mm y-travel: 2000 mm z-travel: 900 mm W-axis (spindle longitudinal): 800 mm spindle motor: kW spindle turning speed range: 5 - 1000 U/min total power requirement: 30 kW weight of the machine ca.: 35,5 t dimensions of the machine ca.: - m - Spindle mount: SK 50 - Table size: 1800 x 2000 mm,10t - Angle head - Faceplate with faceplate slide U: 320 mm, - Heidenhain digital Readout, - Counterholder - 2 plate fields The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring mill Union BFP 130/6 BJ 1982

Costarelli D1300 fully automatic agglomerator, 315 kW drive, was processing LDPE, can be used for film, fibers, fluff, light abd voluminous plastic materials to massive volume reduction., throughput rate around 1 Ton per hour, depending on moisture and material, including : loading conveyor belt, feeding belt, barrel diam.1.300 mm., extraction hopper, screw conveyor, roto-classifier, electric cabinet, 400 V 50/60 Hz, CE compliance certificate, electrical drawings, Users manual, Machine in very good conditions, -------------------------------------------------, watch some videos of similar agglomerators in the attached videos, capacity: 1.200 kg/h, conditions: very good, type: 1.300 mm , Totale power needed for this line: around 500 KVA, including belts, classifier, screws., Including: loading conveyor belt

Inv. Num. : 8987 Type: WD 130 Producer: TOS Generated: Parameters: Maximum spindle speed: 2000 1/min X-axis travel: 6400 mm Y-axis travel: 2500 mm Z-axis travel: 430 mm Without a table.

Dimensions (L/W/H): 3300x2100x2100 mm Weight: 1500 kg Total power requirement: 14 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A four-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible.

Inv. Num. : 8972 Type: WD 130 A Producer: TOS Created: 1996 Parameters: Work table length: 2200 mm Work table width: 2200 mm X-axis travel: 4700 mm Y-axis travel: 1755 mm Travel distances Z-axis: 1100 mm Machine weight: 27 t

B&A REF: 9242 TON: 270 SCREW DIAMETER: 65MM SHOT WEIGHT: 840 STROKE VOLUME: 8063CM3 INJECTION PRESSURE: 1550AR PLATEN SIZES: 860 X 860MM DBTB: 570 X 570MM MIN MOULD HEIGHT: 210MM MAX MOULD HEIGHT: 730MM MOULD OPENING STROKE: 630MM MAX DAYLIGHT: 1360MM EJECTOR STROKE: 220MM CONTROLS: SEF100 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 20KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC

Boring spindle diameter: 130mm, tool holder: SK50, centering: 500mm, travel X/Y/Z: 250mm/160mm/380mm, travel W/U: 1000mm/320mm, feed rate: 2m/min, rapid traverse: 5m/min, max. diameter drilling/facing: 800mm/1400mm, torque boring spindle/facing support: 3100Nm/6150Nm, clamping plate dimensions X/Y/Z: 3500mm/1750mm/350mm, weight: approx. 30000kg, controls: Bosch. Including angle head, extension piece, steep taper tool holder for SK50 (without tools), 4x plate fields with the dimensions 1080mm/2000mm and boring apparatus. Documentation available. An inspection on site is possible.

Centro di lavoro SCM modello RECORD 130 a 4 assi: – corsa utile assi 3410 x 1720 x 300 mm – piano di lavoro multifunzionale da 3120 x 1200 mm – passaggio utile pezzo 280 mm – pompa del vuoto da 250 mc/h – lubrificazione automatica centralizzata – controllo elettronico con PC OFFICE in ambiente Windows e software ROUTOLINK – macchina con bumpers e protezioni perimetrali – anno di produzione 2001 , normative CE – fornita di utensili, testa a rinvio angolare, ventose e dime in legno Gruppi operatori: – elettromandrino verticale POWER2000 con raffreddamento a liquido, con inverter 900 – 18.000 rpm, attacco HSK63F, con 4° asse rotante VECTOR, servito da cambia utensili a 12 posizioni (RAPID 12) – unità di foratura F18 con: 12 mandrini verticali 2+2 mandrini orizzontali su asse X 1+1 mandrini orizzontali su asse Y

Key data: 2500 kN, 700 g/PS, 60 mm

Year of construction 2002 Screw diameter 60mm Shot volume 735cm³ Clamping force 250t Min. mould installation height: 250 mm 2 Core pulls 1 air valve handling/robot ENGEL ECR 52/1-EA,RC100 6 integrated hot runner zones Operating hours only 14,109 h

Code: 0338 Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge bander with a cartridge-based adhesive system for wood edges, pvc, abs, veneer, suitable for furniture, panels, custom-made furnishings, kitchens, bathroom cabinets, carpentry shops, and various - CE Standard Features: Quick glue replacement: patented cartridge system that allows for quick and efficient switching between EVA and PUR glue during operation, or for changing glue colors - Simply replace the cartridge, no complicated cleaning of the glue tank is required - Ready for use in 3,5 minutes Technical data: Min/max panel height mm 6/45 Applicable edge thickness mm 0,4 - 6 Max gluing height mm 51 Min panel width mm 60 Min panel length mm 180 Feed speed mt/min 8 Composition: Gluing unit: Automatic feed for roll and strip edging - Patented Holz Her cartridge system - Roller press unit ...

This 3-axis Elumatec SBZ 131 was manufactured in 2010. It features an impressive X-axis travel of 4200 mm, Y-axis travel of 485 mm, and Z-axis travel of 340 mm. The machine includes an 8-position rotating tool head and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 131 CNC profile machining centre we have for sale. Contact us for further details.

This 3-axis Elumatec SBZ 130 was manufactured in 2007. It features a maximum machining length of approximately 4200 mm and a robust Y-axis travel of 400 mm. The high-speed milling spindle operates at a maximum speed of 6000 rpm, supported by an 8-position turret head tool changer. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 130 CNC profile machining centre we have for sale. Contact us for further details.

A Krauss-Maffei large-format injection molding machine without robots, conveyors, protective housing and attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Total system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83000kg, operating hours: 73259h, production hours: 57753h. Documentation available. On-site inspection is possible. Expected to be available from Q1/2026.

x-travel: 1300 mm y-travel: 1300 mm z-travel: 1300 mm Control: Siemens 840D SL table-size: dia. 800 mm table weight: 1500 Kg c-axis: 360 / 0,0001 ° number of spindle speeds: 10000 U/min/rpm tool taper: ISO 50 spindle drive: 40 / 52 kW rapid travel x/y/z: 50 m/min Tools changer: 199 pos. dimension of workpiece: 1400 x 1120 mm total power requirement: 42 kVA weight of the machine ca.: - t dimensions of the machine ca.: 11,9 x 6,1 x 5,2 m 4-axis BAZ equipped with: - CNC control Siemens 840D Solution Line - pallet changer with 4 pallets (dia. 800mm) - rotary table (B axis) - tool changer 199-fold (SK 50) - coolant system - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2600 kN, 950 g/PS, 70 mm

Year of manufacture 2005 Clamping force: 260 tons. Screw diameter: 70 mm Operating hours: 125,000 h incl. removal robot: Engel ERC 55/O-E Good condition, regular maintenance, energized

From a current recycling we offer you filling system of the company GAI including labeling machine Year of manufacture: 2023 Condition: good Hours: Asking price: 65.000,00 VHB Original price: €114,465.00 Equipment / accessories / other information: See original invoice Asset Manager: M. Vorkötter Phone: 0202-25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 18182 Bentwisch The sale is without warranty Subject to prior sale

For sale is a Tool Temp temperature control unit Works without any issues. To sell due to business closure. Technical specifications in the pictures. Self-collection and dismantling. Price per piece 2 pieces in stock Price is net plus VAT All information without guarantee

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (22 kW), motor cover, base plate with feet, water valves (original Westfalia), all controls including original GEA operation panel (excluding the box itself), all inlet/outlet pipes with pumps, flow indicators, sample valves, service tools for maintenance including pressing tool and instruction manual., Additional features:, Excluding:, - Box to add all controls inside., Type of Machine: Cream Separator / Skimmer, Capacity: 15.000 liter per hour, Bowl speed: 5.920 rpm, Motor: 22 kW - 380 V - 42,5 A - 1.460 rpm - 50 Hz - 3 Ph, Weight: ± 1.920 kg, Dimensions: 200 x 110 x 175 cm

Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (22 kW), motor cover, baseframe with feet, manometers, counter pressure valve, flow regulation valve, water valves, sludge tank and service tools for maintenance including pressing tool., Additional features:, Excluding:, - Control panel., Type of Machine: Bacterial-Removing Centrifuge (Bactofuge), Capacity: 15.000 liter per hour, Bowl speed: 4.500 rpm, Motor: 22 kW - 380 V - 42,5 A - 1.460 rpm - 50 Hz - 3 Ph

Unused small gear wheel for a Westfalia MSB 130-01-076 skimming separator. Article number: 3170 3423 010. German name: Schnecke. For a 50 Hz driven machine., Type of Machine: Small Gear Wheel, Drive line: 50 Hz, Condition: Never used

Cold Milk Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (26 kW), motor cover, base plate with feet, water valves (original Westfalia), inlet / outlet pipe and several service tools for maintenance., Additional features:, Excluding:, - Control panel and operation panel., Type of Machine: Cream Separator / Skimmer, Capacity: 15.000 liter per hour, Bowl speed: 5.920 rpm, Motor: 26 kW - 380 V - 50 A - 1.750 rpm - 60 Hz - 3 Ph, Weight: 1.920 kg, Dimensions: 200 x 110 x 175 cm

spindle diameter: 130 mm x-axis: 4000 mm y-axis: 2100 mm z-axis: 1500 mm w-axis: 700 mm spindle taper: BT 50 spindle turning speed range: 2500 U/min spindle drive: 22 / 26 kW table surface area: 1600 x 2000 mm table load: 12 t B-axis (table): 0,001 ° feeds longditudinal/cross/vertical: 5000 mm/min rapid motion -longitudinal/cross/vertical: 15 / 12 / 15 m/min Control: Fanuc 0i MF total connected load: kW weight of the machine ca.: 35 t dimensions of the machine ca.: 7,5 x 6,7 x 4,5 m Equipped with: - FANUC 0i MF (10.4” LCD) - Data Server + AICC II - ATC for 60 Tools (BT 50) - X/Y/Z axis THK roller linear guide way - X/Y/Z axis Haidenhain linear scales - Coolant thru spindle 40bar - Spindle oil cooler - Hydraulic cooler - Air conditioner - Chip conveyor Operating Hours: 14761h Cutting Hours: 4382h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

B&A REF: 9289 TON: 320 SCREW DIAMETER: 60-35-30MM SHOT WEIGHT: 607H / 132P / 97S STROKE VOLUME: 644 / 144 / 106CM3 INJECTION PRESSURE: 2000 / 2000 / 2500 AR PLATEN SIZES: 1040 X 1040MM DBTB: 720 X 720MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 700MM MOULD OPENING STROKE: 700MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 250MM CONTROLS: SELOCIA TOUCH CORE PULLING: 3 AIR VALVES: 2 MOTOR: SERVO HEATING CAPACITY: 22 + 7.7 + 7.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: MULTILFT SELECT 15KG QUER SCREW DRIVE: ELECTRIC HOT RUNNER: 18 ZONE ACCYMULAQTED: 6

Dishwasher Meiko FV 130.2 Fine filter system Easy Clean Concept 3 programs & drain pump Filling washing system only DGUV V3 tested by us Connection: 400V, 32A-CEE plug Used machine

Awaiting refurbishment at our headquarters in Northamptonshire is this Engel VC500/120 injection moulding machine with double pneumatic and single hydraulic core pull. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Inc ...

TECHNICAL DATA: Roller length: 1300 mm 02 rollers Ø 190 mm Installed power: 0.75 kW EQUIPPED WITH: Glue tray Roller protection grille Safety Foot Switches

used pastry forming roller Kalmeijer KGM Kipferl 1380-910BProduct descriptionManufacturer: KalmeijerType: KipferlNr.: 1380-910Bowant: usedDough figure:Dimension: 40x34 mmThickness: 7.5 mmWeight: 6 grRoller width: 250 mmDetails see pictures.

Knife Herlitzius (A 130) for bread slicerKnife (A 130) from Herlitzius for bread slicer, is used. Dimensions W.: 45 cm, H.: 28 cm (photo may vary)Herlitzius knives are known for their high quality and are often used in commercial bread slicers. Model A 130 presumably refers to a specific knife size or design that fits different machines. These knives are typically made of high-quality steel and need to be sharpened or replaced regularly to ensure a clean cut.

used pastry forming roller Kalmeijer KGM Pretzel Small 1383-912AProduct descriptionManufacturer: KalmeijerType: Pretzel KleinNo.: 1383-912AZstand: usedDough figure:Dimension: 55 mmThickness: 4 mmWeight: 7 grRoller width: 250 mmDetails see pictures.

Kalmeijer Pastry Forming Roller KGM Kipferl 1380-910BProduct descriptionManufacturer: KalmeijerType: KipferlNr.: 1380-910Bowant: usedDough figure:Dimension: 40x34 mmThickness: 7.5 mmWeight: 6 grRoller width: 250 mmDetails see pictures.

This Impulse IP-130 Brussel piston pump is designed for vertical and horizontal dewatering. These positive displacement pumps are self-priming and extremely suitable for pumping a mix of water and air without any restrictions. In addition, this pump can run dry without worry, without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , MAX: 42 m3 per hour, , MAX: 22 MWK, , Throughput capacity: 42 m3/h, Motor brand: Hatz, Max. head: 22 MWK, Weight: 1200 kg, , = More information =, , General information, Year of manufacture: 2026, Applicable material: Water, , Weights, Empty weight: 1.200 kg, , Functional, Connector size: 4 Cardan, Cargo space capacity: 700 l, Quick coupler system: Yes, , Condition, Technical condition: very good, Visual appearance: very good, , Financial information, Price: On request, , Additional information, Please contact Gert-J ...

Neolt NeoWeld is the series of pulse welding machines designed to meet the production needs of sign-makers and professionals in the digital printing, indoor/outdoor advertising and POS communication. The welding pulse technology choosed for NeoWeld stands as a substantial alternative to the high-frequency, ultrasonic and hot air technologies, offering a number of indisputable advantages from the technical, operational, economical and dimensional point of view. ? Heating length about: 1300mm ? Heating width about: 25 mm ? Working pressure: 220 kg./cm ? Electrode temperature: from 70° to 250° C ? Air pressure: 7/8 Bar ? Dimensions: L1500 x W1300 x H1400mm. ? Machine Weight: 433 Kg. / 954,6 Lbs. ? Height of work table: 1000 mm. ? Power: 400V 50/60Hz ? Power supply: 400V 50/60Hz ? Consumption: about 6 kW. plug CEE (red) 16A 3P+T 400V 50/60Hz ? Power supply: 220/240V 50/60Hz ? Consumption:  ...

Machine – Trumpf TC6000L - Manufacturer: Trumpf - Type: TC - Model: TC6000L 1300-3200W - Year of manufacture: 06/2002 - Operating hours: 109,870 h total / 76,477 h laser on - Laser power: 3,200 W - Punching force: 22 tons - Sheet thickness: Max. 8 mm - Workpiece weight: 200 kg - Control unit: Siemens Sinumerik 840D SheetMaster - Model: SM1606 V110 09 - Year of manufacture: 2003 Trumagrip - Year of manufacture: 2003 Find more here - / Contact us at -