128,264 used machines on RESALE, but how to find them? Machine Search
Vacuum pump, airframe pump, rotary vane pump ALCATEL type 100-132Fabr. No. 173082 - 3101 Year of manufacture: approx. 1995Volume flow: approx. 50 m3/hNegative pressure: 0.5 mbar (indicated on the nameplate)Negative pressure: - 0.9 bar (determined during test run)Engine power: 3 kWMotor speed: 1420 rpm. Mains connection: 400 volts, 50 Hz- Oil-lubricated rotary vane pumpDimensions L x W x H: 700 x 420 x 310 mmWeight: 78 kgGood condition; used
Straightening and welding plate made of steel, solid materialMachined steel plate from a tool rackLength 2980 mmWidth 1380 mmThickness 74 mm- Full steel plate- Surface milled- 4 pieces screwed trailer blocks- Plate provided with some symmetrical holesWeight approx. 2380 kg; used
Hydraulics Machine viseJaw width: 130 mmJaw height: 46 mmClamping force: 4 ton. Clamping range: 0 to 220 mmOpening width: max 223 mmGuideway height: 72 mm- 3 clamping ranges adjustable via plug-in pins, 0 to 79mm, 67 to 151 mm and 139 to 223 mmDimensions L x W x H: 535 x 210 x 119 mmWeight: 35 kgvery good condition; used
Hard stone slab, granite slab, granite block, measuring cubeHard stone block, angle block precisely machined on all sidesThe granite slab comes from a measuring machineDimensions of the large table surface L x W x H: 1350 x 1000 x 300 mmDimensions of the small table surface L x W: x H: 1350 x 300 x 245 mm- 5 pieces of base blocks with leveling screws approx. 400 mm- 8 pieces of threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm)- 4 pieces of threaded bushings M16- small chipping on eggs Top edgeOverall dimensions L x W x H: 1350 x 1350 x 300
CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)
3-axis machining centre with automatic 8-fold tool changer for aluminium or PVC profiles Max. travel X-axis: 4200 mm Max. travel Y-axis: 480 mm Max. travel Z-axis: 325 mm Control system E 500 Speed infinitely variable up to 6,000 rpm Hand-held control unit Minimum quantity spraying Double-sided angle head and a high-speed spindle Tensioner detection 8 pneumatic material tensioners Light barrier
For sale are 128 new safety valves BOGE Id.Nr.: 564020203 Pressure 11.0 bar / single certificate Connection: G 1"-M Material: Brass Gasket: NBR Temperature: -10+100 Nominal diameter: DN 18mm Approval: CE ISO 4126 Sale possible in packages of 50 pieces or more Sale without warranty
Röhm 20641, KFM 130/2, Power Chuck 130 MO KFM 2-Jaws, ZA110 Overall diameter: 130 mm PF003850 Number of Jaws: 2 Jaw Stroke: 5.5 Inner diameter: 46 mm Width: 63 mm Manufacturer's specifications for technical data: Max. actuation force: 5 kN Max. total clamping force: 11 kN max. speed: 3950 rpm rpm min^-1 at that time new price approx. 4500€ You can find more power chucks - new and used - in our shop! International shipping costs on request!
FAS discharge flap belt conveyor GF 1380-800-600 RA2419 Technical data: Conveyor length (NL): 1380 mm (800 mm conveyor belt + 580 mm flap) Frame width (NB): 800 mm Belt width (GuB): 600 mm Construction height (BH): 435 mm support feet: optionally available Conveying speed (v m/s): adjustable between 0,025 and 0,883 m/s with frequency converter Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.25 lifting and 0.37 conveyor belt Side guide distance: 655 mm Maximum recommended package size: 600 x 450 mm Optionally available: Supports to increase the delivery height Frequency converter Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 1380 Nominal / outside width in mm: 800 Belt width in mm: 600 Driven: YES Engine type: SEW Getriebemotor KW: 0,25/S1, 0,37/S1 scope of delivery: including side g ...
Grinder with mixer Manufacturer: Kramer Grebe Wetter Model: Grinder 130mm Made of stainless steel Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg
Key data: 2000 kN, 562 g/PS, 55 mm
Specification Injection Moulding Machine Engel VC 1350/200 Tech General data Clamping force: 200 t Year of Make: 2007 Injection unit weight: 562 g Injection Unit .../1350 Screw diameter: 55 mm Specific injection pressure: 2183 bar Injection volume: 618 cm³ Injection unit weight: 562 g Tool clamping unit 200/... Clamping force: 200 t Dimensions of the tool plates: 860 x 570 mm Output force: 80 kN Tool height: 400 mm Opening travel: 750 mm Maximum panel spacing: 1150 mm Discharge stroke: 180 mm Other Specifications Weight: 14200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Year of Make: 2007 Equipment 2 x hydraulic core on the moving plate Pneumatic valve Integrated robot 8 zones for hot runners Rotameter 8-fold
used
Haco PPH 135 ton x 4100 mm CNC Capacity: 135 ton x 4100 mm Backgauge: CNC Control: Delem DA-41T Passage between uprights: 3600 mm Max stroke: 120 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 70 mm/sec Working speed: 7,2 mm/sec Returning speed: 62 mm/sec Electric motor (power): 11 kW Length: 4270 mm Depth: 1500 mm Height: 2470 mm Weight: 9,1 ton
pressure: 200 t table length: 1600 mm table width: 1300 mm dayligth: 1700 mm total power requirement: kW weight of the machine ca.: 19 t dimensions of the machine ca.: 2,95 5 6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lippert Belt Conveyor Folding Switch track 1360-750-600 RA1590 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1170x900 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 ...
Compressor type Champion 135 TS Volume 12.8 m³/min Properties: Identification number 449001/50 Order no. 50352400 Built-in compressor 50 Compression medium AIR Length 2400 mm Width 2400 mm Total height 2100 mm Weight 2480 kg Volume flow 12.8 m³/min Suction pressure 1 bar Step pressures 1.8 / 7 bar g Speed 1000 min ̄¹ Installed motor power 75 kW Motor revolutions 1000 rpm
Transnorm Rising falling Incline with arch belt conveyor GF 2200+1300-700-600 RA2189 Technical data: Conveyor length (NL): 3500 mm ( 2200 mm incline + 1300 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3500 ( 2200 + 1300 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: ...
Transnorm belt conveyor GF 4080-1310-1200 RA1862 Technical data: Conveying length (NL): 4080 mm Framework width (NB): 1310 mm belt width (GuB): 1200 mm height (BH): 120 mm Side guides height: 100 mm Drive: SEW Motor Electrical data: 50Hz V380-500, kW 0,55 Side guides on both sides: includet Optionally available: Supports Frequency Converter Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 4080 Nominal / outside width in mm: 1310 Belt width in mm: 1200 Driven: YES Engine type: SEW Eurodrive KW: 0,55/S1 scope of delivery: including side guides without supports For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. W ...
Transnorm accumulation roller conveyor 24V 2520-1430-1333 RA1858 Make: Transnorm Running direction: both directions Roller width (RB): 1333 mm Nominal/outer width (NB): 1430 mm Length: 2520 mm Roller diameter: 50 mm Roller distance: 60 mm Motor Roller conveyors: SEW E19I 09107 24V Height frame: 10 mm including two controlers Total 4 stowage spaces Conveyor speed: freely adjustable up to 1,25m/s Optionally available: Supports Features: condition: very good (used) Construction year: 2019 nominal voltage: 24V Conveying length in mm: 2520 Nominal / outside width in mm: 1430 Roll width in mm: 1333 Roll division in mm: 60 Driven: YES Engine type: SEW 24V Rollenmotor scope of delivery: including side guides without supports For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look f ...
ENGEL ES 1350/350 HL injection moulding machine was built in 1995 in Austria by ENGEL AUSTRIA GmbH. The machine, which is designed for the economical production of plastic parts, is distinguished by the use of many components with excellent technical parameters. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system, operating at a maximum force of 350 tonnes, guarantees high repeatability and quality of the manufactured parts. Once the production process is complete, the robot automatically transfers the finished products from the workspace to a conveyor belt. The ES 1350/350 HL injection moulding machine weighs 5000 kg. Technical specifications of the ENGEL ES 1350/350 HL injection moulding machine - CNC controller: ENGEL - maximum m ...
Five older Mikron thread milling machines are available: 2x Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01, and 1x Mikron 106.01. An on-site inspection is possible.
Height=1.55 m, Overall length= 1.3 m, Overall width= 1.1 m,
Pipe bending machine Type: Gigalus 130 S Producer: Mewag Year: 2014 bending and shaping of 3D pipes with a diameter of min. 40mm and wall thickness min. 4mm. Based on CAD drawings, it converts the exact shaping of pipes into the final form, including the simulation of bending angles. Engine power: 40kW max.radius: 450mm bending accuracy: +/- 0.2 degree length accuracy: +/- 0.5 mm Machine in good condition, under power. Find more here - / Contact us at -
pressure: 130 t chamfer lenght: 3060 mm distance between columns: 2690 mm column arm: 410 mm stroke: 365 mm dayligth: 535 mm ajustment speed: 200 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec table width: 120 mm table height: 1050 mm tiltable up to: +/- 10.0 mm Number of working hours: ca. 31.800 h compressed air: 5.0 - 7.0 bar oil volume: 250 l operating pressure: 340 bar voltage: 400 V total power requirement: 23.0 KVA weight of the machine ca.: 12950 kg range L-W-H: 3660 x 2310 x 2900 mm Machine in a well-maintained condition () with only approx. 31.800 operating hours - in checked condition - machine video - https://www.youtube.com/watch?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 swiveling control panel, front left 2D graphic programming & product display Tool & program library USB keyboard and mouse interface ...
saw blade diameter: 350 x Ø 30/40 mm cutting diameter: 135 mm cutting length: 430 mm dimensions of saw-blade: 350x3,0/2,4x40 mm turning speeds: 3800 U/min Dust suction hood: 100 mm total power requirement: 3,0 kW weight of the machine ca.: 100 kg dimensions of the machine ca.: 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 10 ...
x-travel: 1000 mm y-travel: 360 mm z-travel: 400 mm spindle taper ISO: 40 ISO table:: 1370 x 320 mm feed:: H 80 - 830 / V 23-625 mm/min. turning speeds: H 35 - 1500 / V 45 - 1660 U/min distance spindle /table: H 30 - 430 / V 210-610 mm rapid traverse: Z Achse 750 mm/min throat: 305 - 805 mm T-slots: 3 x 14.0 mm table - swivable +/-: -45 / +45 ° workpiece weight: max. 300 kg coolant pump: 25.0 L/min. total power requirement: 7.6 kW weight of the machine ca.: 1540 kg range L-W-H: 1840 x 1830 x 2050 mm - Large rectangular guide in y and z axes - ensure increased stability - 8x automatic feeds and rapid traverse in all axes - driven by servo motor - Universal milling head system Huron, adjustable to all angular positions - Swiveling control panel with ergonomically placed switches - Heavy machine stand made of gray cast iron for vibration-free work - Very smooth running thanks to ground gea ...
: 3.0 mm ST 40 : 2.0 mm VA : 90.0 Grad blade length: 130 x 130 mm table:: 640 x 460 mm work height max.: 900 mm engine output: pneumatisch weight: 200 kg range L-W-H: 600 x 670 x 1270 mm Properties: - Notching with burr-free cut, without deformation of the cutting edges - Machine body made of high-quality gray cast iron, base made of sheet steel - Cutting blades made of surface-hardened tool steel - Effortless work thanks to pneumatic drive - Operation using a foot pedal, so both hands are free for the workpiece - Large work table with integrated scales - T-slots for precise guidance of the pivoting stops - Protective cover in front of the cutting blade for high safety Scope of delivery - 1x set of cutting blades - 2x pivoting material stops - Plexiglas protective cover - Foot pedal - Base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 15.000 kg height: 790 - 1350 mm width: 1200 mm weight: 65.0 kg Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 135 t chamfer lenght: 3050 mm distance between columns: 2600 mm column arm: 410 mm ajustment speed: 160 mm/sec working feed: 10.0 mm/sec return speed: 120 mm/sec stroke: 265 mm dayligth: 530 mm table height: 900 mm oil volume: 200 ltr. control: DNC 880 S Number of working hours: ~ 17.200 h total power requirement: 15.0 kW weight of the machine ca.: 10250 kg. range L-W-H: 4570 x 2360 x 2900 mm good condition () current new price approx. 80.000 euros special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=dyv7iQXcRt4 Equipment: - electro-hydraulic CNC press brake - two synchronized cylinders with HIGH PERFORMANCE hydraulic components - with CYBELEC CNC control - DNC 880S 2D graphic display for display and multiple simulation graphic 2D programming easy handling automatic bending sequence calculation and collision detection large p ...
pressure: 125 t chamfer lenght: 3100 mm distance between columns: 2550 mm throat: 250 mm stroke: 120 mm ajustment speed: 70.0 mm/sec working feed: 7.0 mm/sec return speed: 60.0 mm/sec dayligth: 325 mm table width: 180 mm work height max.: 915 mm oil volume: 150 ltr. total power requirement: 12.5 kW weight of the machine ca.: 9100 kg. range L-W-H: 3200 x 1325 x 2470 mm well-maintained condition from a maintenance workshop () Equipment: - simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam - electro-motor-driven back stop, with ball screws (X axis) with 2x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display - electro-motor-driven adjustment of the immersion depth (Y1+Y2 axis) with digital position display - swiveling operation, left-hand side - split deer foot + pointing tool - 1 ...
pressure: 135 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 200 mm/sec work speed: 12.0 mm/sec return speed: 190 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 15.0 kW weight: 10800 kg range L-W-H: 5100 x 2100 x 2850 mm -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, Sy ...
sheet width: 1320 mm plate thickness: 2.5 mm ST thickness at Niro-steel: 1.2 mm blade length: 1350 mm no. of strokes: 34 Hub/min back stop - adjustable: max. 825 mm cutting angle: 1.5 ° work height max.: 810 mm Control: konv. engine output: 3.0 kW weight: 1100 kg range L-W-H: 1950 x 1450 (2000) x 1200 mm Exhibition machine - like new Never been used () Special price upon request Features: - Robust electro-mechanical sheet metal shear - Heavy-duty / robust drive motor - Manual backgauge, including analog position indicator Adjustment range max. 825 mm - Manual cutting gap adjustment - 2x table side stops including mm scale - 1x front stop bar - manually adjustable - 2x front support arms - Grip recess in the front work table - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating panel - front right - Rear safety device - Rear sheet chute - Connec ...
Key data: 120 mm, 160 mm, 130 mm
PROFILE BENDING ROLL 130- MODEL PARMIGIANI ITALY ELECTRO MECHANICAL MACHINE SHAFTS OUTPUT DIA..130 MM 3 ROLLERS PYRAMID UPPER ROLL DRIVEN ROTATION WITH GEARUNIT ONELECTRIC MOTOR Kw 11 SIDE ROLLERS BENDING POWERED ON ELECTRIC MOTOR Kw 3 UPPER ROLL DIA 380 mm SIDE ROLLERS DIA 350 mm CONTROL PANEL UPGRADED LATEST TECHNOLOGY ELECTRIC INVERTERS FULL POWER CONTROL WITH INFINITE VARIABLE SPEED COMMANDS ELECTRIC ON PORTABLE PUSH BUTTONS DIGITAL POSITION READOUT OF THE BENDING ROLLERS WEIGHT OF THE MACHINE 4,5 TON SAFETY AND EMERGENCY SYSTEM INSTALLED MACHINE WORK WITH VERTICAL SHAFTS
CNC Table Type Horizontal Boring Mill Doosan DBC 130II. S/No. MB0003-000435 New in 2013 Control Fanuc 31i-MA Spindle Dia. : 130mm Travel : XYZ – 3000/2000/1600 mm W – 700 mm Rotary Table (1/1000 ͦ) Size : 1600 x 1600 mm 2 Pallets Spindle Speed : 2500 rpm Tool type : BT50 ATC : 80 tools
Manufacturer: Vecoplan Model: VAZ 1300 Year of Manufacture: 2011 Type of Machine : Shredder System Technical Details: - Year of Manufacture: 2011 - Operating Hours: 4,718 - Throughput (depending on material): - Shredding stage P-3: approx. 1,300 kg/h - Shredding stage P-4: approx. 1,000 kg/h Performance Data: - Permissible load lifting device: 600 kg - Max. lifting speed: approx. 6 m/min Shredding performance (depending on screen hole size): - With 15 mm screen: approx. 700–800 kg/h - With 20 mm screen: approx. 1,000 kg/h - With 30 mm screen: approx. 1,300 kg/h Conveyor capacity: - Scraper chain conveyor: approx. 25 m³/h - Scraper chain conveyor speed: approx. 18.8 m/min - Screw conveyor speed: approx. 4.5 m/min Condition: - Shredder is disassembled. - In photos, hopper is rotated 90° and placed loosely. - No discharge conveying system (scraper chain conveyor) included. ...
Polar 137 N+, Year 2025 TFT Touchscreen Program Airtable Airtable left Airtable right Etc. Available: at short term
The Alfa Laval Pump SK series, including the SK 472-132 S/4TF model, are positive displacement pumps known for their reliability and efficiency in handling various fluid applications. Here are some key aspects typically associated with these pumps:, - Design: The Love Pump SK series often features a robust design suited for heavy-duty applications. The pumps are typically made of high-quality materials to resist corrosion and wear, ensuring longevity., - Operation: These pumps operate based on a positive displacement mechanism, meaning they move fluids by trapping a fixed amount and forcing it into the discharge. This design allows for precise flow rates and consistent pressure., - Applications: Alfa Laval Love Pumps are commonly used in industries such as food and beverage, chemical processing, and pharmaceuticals. They are suitable for viscous and shear-sensitive products, making them ...
TOS HULIN WD 130A – Universal Plate Boring Mill Year of construction : 1998 Spindle : 130 mm ( Ø ) ISO 50 X : 6,000 mm Y : 2,500 mm Z : 1,000 mm (spindle box) W : 800 mm ( spindle ) B : 360° (turntable) Z1: 1,500 mm (table) Universal Rotary Table : 2,200 x 2,200 mm – 25 T Spindle speed : 900 rpm Spindle motor : 37 kW Total power : 60 kW Machine weight : 36 T (approx.) Digital Display : Yes Angle plate : 2,000 x 500 mm (2 pieces) Vertical milling head : 90° Face Slider
A notching saw Elumatec for post-and-beam profile combinations is available. Lower saw blade: diameter: 550mm, tilt range: 45°-60°, max. cutting height: 210mm, speed: 2800rpm, power: 3kW. Upper saw blade: diameter: 500mm, tilt: 60°, max. notching depth: 190mm, speed: 2800rpm, power: 3kW. Stroke: 830mm, working height: 990mm, swivel left/right: 30°/30°. Machine dimensions X/Y/Z: approx. 3000mm/1450mm/1600mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.
Key data: 250 , 7
Rotary screw air compressor. Pressure: 7.5 bar. Power: 136 kW. Rotation speed: 1488 r/min. With new screen.
- Diameter 130 mm - Weight 18,4 Kg - Steel 400 N/mm2 = 6,0 mm - Inox 600 N/mm2 = 4,0 mm - Alu 250 N/mm2 = 7,0 mm
- Diameter 130 mm - Weight 18,5 Kg - Steel 400 N/mm2 = 6,0 mm - Inox 600 N/mm2 = 4,0 mm - Alu 250 N/mm2 = 7,0 mm
An FTH Fördertechnik bag palletizing system is available. Formation: 5-bag, palletizing capacity: approx. 1500 bags/h, pallet dimensions X/Y 1: 1200mm/800mm, pallet dimensions X/Y 2: 1200mm/1000mm, stacking pattern: variable, overall system dimensions X/Y: approx. 12600mm/5700mm. An on-site inspection is possible.
A Morlock single-color pad printing machine is available. Ink system: cup system, oval print image diameter range: 100mm-250mm, min. cliché print image dimensions X/Y: 100mm/210mm, max. cliché print image dimensions X/Y: 250mm/280mm, ink cup diameter: approx. 80mm, pressing force range: 1100N-1500N, max. cycle rate: 1400-1800 cycles/h, machine dimensions X/Y/Z: approx. 1050mm/500mm/650mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible.
Injection moulding machine Arburg 420S 1300-350 BJ 2000 without handling
Height=1.3 m, Overall length= 0.75 m, Overall width= 1 m, Net weight= 200 kg,
maximum number of results exceeded
please refine your search
