tornos 13 ca used for sale

2 units and 1 large drying cabin made of stainless steel incl. piping, for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying. Drying below 40°C, only permitted for indoor use. Very solidly built. Dimensions: Aggregates - 1.95 x 1.25 x 2.00 m, Drying cabin: 7.40 x 2.67 x 2.50 m, Stainless steel: 1.4301 Aggregate 1 : Built in 2012, Aggregate 2 : Built in 2014, Drying cab: Built in 2015. The Blue Evolution XL steam cleaning device from Beam can also be purchased. We will be happy to send you the data sheet. Price VB

Type: KB600LB Serial number: 409.11.1 Year of construction: 2011 Belt width: 700 mm Model: 90 degrees, right hand side Radius: 1200 mm Power: 3 x 400V, 50Hz, 0.2kW Dimensions: 2200 x 1050 x 1100 mm

A SULT dust extraction and filtration system with cartridges is available. Air volume flow: 3000m³/h, filter area: 84m², air pressure: 6bar, compressed air consumption: approx. 10Nm³/h, max. operating temperature: 70°C, fan speed: 2980rpm, total pressure drop: 4100Pa, number of cartridges: 4. Machine dimensions X/Y/Z: approx. 2000mm/900mm/5000mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

Type: 11248A Serial number: E050970105174 Year of construction: 2018 Belt width: 400 mm Pitch: 100 x 15 mm Infeed height: 900 mm Outfeed height: 1250 mm Power: 3 x 400V, 50Hz, 0.8kW Dimensions: 1900 x 1250 x 1550 mm With Packo FP/66-32/064 centrifugal pump

Becker BZ-2 Atomic - Packaging System - 2 identical, mirror-inverted packaging lines available - without cutting machine - Year of construction 2020 In the system, a trimming is first carried out at the front of the cardboard in order to to cut off possible damage to the van. After trimming, a Edge trimming on both sides of at least 30 mm each. Furthermore, if necessary, a corner is cut off from the cardboard. This is depending on the type of Fefco different. Finally, the cardboard is creased at the folding points and removed from the machine. The waste that is generated is transported by means of a waste belt underneath outside the machine. At the machine outlet there is a Conveyor belt, which disposes of the waste into a container. If the edge trim is too long, it must be cut inside the system so that it can be easily removed from the of the plant. The blanks and the ...

Folding box cartoning machine Uhlmann C 100 LA • Format range folding box W 30-100, H 15-75, L 70-200 mm • Output 15-100 folding cartons/min • For offset buckle on both sides • Product feed for blister via blister stacking chute • Code reading Laetus Argus for 2x brochure code (front + back), 1x folding box code, 1x brochure presence in folding box • Brochure folding and inserting machine from the GUK FA 21/4 Cartonac 91 magazine • Colour embossing station for folding flap opposite the insertion side, 2 lines, with embossing numbers • Poor ejection with ejection counter-control • Vacuum generators • PLC Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color touch panel - Code Reader Cognex Camera Reader System - Validation documentation - Hot melt machine

C100 LB Cup Chain for Cans, Bottles/Blisters DESCRIPTION: • Format range folding box W 30-100, H 15-90, L 70-200 mm • Output 15-100 folding cartons/min • For offset buckle on both sides • Centrally adjustable cup chain • Product feed for blisters via blister stacking chute (manual packaging) • Monitoring of the height of the packaged goods in the cup chain • Code reading Laetus Argus 4 for 2x brochure code (front + back), 1x folding carton code, 1x brochure presence in folding box via Lumat • Brochure folding and inserting machine from the GUK FA 21/4 Cartonac 91 magazine • Colour embossing station for folding flap opposite the insertion side, 2-line • Poor ejection with ejection counter-control • Vacuum generators • PLC Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color touch panel - Code Rea ...

Marchesini BA400 automatic horizontal cartoner for round products - with infeed for tubes. Marchesini BA400 continuous motion horizontal cartoning machine with mechanical output up to 300 boxes per minute (with average production tested output of 260 boxes per minute) - suitable to pre-break and to open either reverse or straight tuck-in three flap cartons, insert product, which has been delivered to infeed, close cartons and discharge. With integrated Marchesini tube infeed and 3-lane tube infeed conveyor (please see photos). Sectors of use: pharmaceutical, chemical, cosmetics, food, dietary, medical devices, contract manufacturing. Year: 1993; S/N: 393000117 Originates from a high-profile Pharma environment, where machine was well looked after, serviced on regular basis and it is in excellent overall condition. Used for round / cylindrical products and lastly run on tubes, be ...

JWell cast film line 160cm widht CPE CPP microembossed cast film line 15-100 gram m2 CPP, CPE embossed film line

IMA Matic 90 Automatic Capsule Filler with 7 sets of tooling - Specs: The machine requires work and service; therefore, it is sold on as seen” / as is”. Available with 7 sets of tooling in excellent – As New condition, with suitable storage cases - for tooling info please get in contact with us IMA Matic 90 capsule filler - technical characteristics: Output up to 90,000 capsules per hour. Capable of filling powders, pellets, and granules - currently set for powder. Including: • Capsule sorter • Vacuum Pump - for capsule separation and cleaning. • Aspiration – Dust Extraction Unit - manages dust collection during the filling process. Matic 90 was the first IMA Italy design for fully automated capsule filling and closing machine - "no operator required" operation once set up. All sanitary stainless steel contact parts. Dosing Method: typically utilizes a do ...

Hydr. 25 ton plate punching machine with sliding head Work area 1600 x 500 mm Weight approx. 1500 kg Height 210 cm

Plant for the production of caustic soda PROMINENT SYSTEMS Tank and dosing system for cleaning systems in the food sector, such as bottling plants - Storage tank DVS 2205 made of PE-100 - Fall arrester - Dosing system - Container diameter: 1,640 mm - Container height: 2,000 mm - Net volume: 4 m³ - Everything regularly maintained and TÜV tested - Condition: Mint Viewing by arrangement

Used KHS bottle filling line with crown capper - overhauled by HORMES - Filling rotary - Bottle cap bunker - Feeding of the crown caps by magnetic tapes - Conveyor belts The plant has been completely overhauled by HORMES and is currently out of operation. Viewing possible. We will be happy to send you further information on request.

Stock number: F288, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Capsule machine, Capsule: For plastic screw capsules, Theoretical capacity: Max. 60 units/min., Conveyor: Prepared for laminar conveyor, Manufacturer: MSM, Type: 2-head - Vertical turning with capsule sort out, Other: Excl. control box

Horstmann SEW Elevator Cable Winch RA2467 Technical data: Frame dimensions: 1380x100x600 mm (HxLxW) Winch diameter: Ø = 450 mm (1420 mm circumference) Steel rope thickness: 10 mm Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 7.5 S1 Rope length: 14200 mm (14.2 m) Speed (v m/s): 0.54 Pulling force: 11600 N /1160 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG

Camera module, max. passage width 650mm, max. 420mm camera scan width, own drive with servo motor, vacuum transport belt at the top, module length 800mm, order evaluation and documentation, connection to HHS quality assurance system possible.

Leutenegger (Starrag) Wash Box Technical data Bathroom capacity: approx. 0.9 m3 Chemistry: Henkel P 3 Voltage: 3x400V/230V 50 Hz Supply line: 40 A Control voltage: 24 V DC Temperature max: 50° C Electric heating Heating capacity: 3x3.25 kW = 9.75 kW Work pump: 3 kW Exhaust fan: 0.37 kW Exhaust air volume: 400 m3/h Data sheet at this link Shipping costs on request More items - new and used - can be found in our shop! International shipping costs on request

We offer a new unused cable peeling machine from a small German company specializing in recycling machines. The machine is new and unused and can be used for different cable diameters. from 10 - approx. 50 mm the machine is very robustly constructed

Racking hall consisting of cantilever racks and pallet racks, OHRA, floor area approx. 867m2 – used - : Price from location: 99.500.-€ (net), for self-dismantling! Price for disassembly on request. For an extra charge, the material for closing a gable side is also available! Manufacturer: OHRA Year of construction: 2019, the sheets 2021 Dimensions of the hall: Width approx. 17.35m Length: approx. 50m Height: Shelf approx. 6,385mm Height ridge approx. 7.10m After dismantling, one long side of the hall is open (where it now stands at the existing hall) Cantilever rack: 2 rows of 25 double-sided frames = a total of 50 pieces of cantilever rack frames double-sided Arm length: 1.20m Arm Load: 1,400kg Load center of gravity: 600mm Stand load per side: 4,200kg Wheelbase: 2m Arms are plugged in Arms with load deflector, device for roll-off protection Incl. palle ...

length: 560 mm width: 730 mm height: 1150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer a variety of control cabinets, one-, two- and three-door. With equipment (relays, automation, switches, UPS, etc.) I can send photos of all 50 cabinets by email. The price is negotiable.

Overview  This pilfer proof capping machine was manufactured in 2022 by the Spanish company CTM Ingeniería. It has been used for only 1.5 years under light operating conditions as part of an in-house production line. The company is now outsourcing its bottling operations, and therefore the machine is available for sale. It is in excellent condition and ready for immediate integration into a new production setup. Technical data  Capacity: approx. 1,200 bottles/hour (in a fully automated line) Cap type: Pilfer proof screw caps Head: Configured for 28 mm caps (interchangeable with other sizes) Bottle compatibility: Adjustable height, currently configured for small bottles Construction: Compact stainless-steel design Condition: Excellent, used for only 1.5 years Operation: Suitable for integration into automated bottling lines  

A Kematec MBK 1 AR clocked rotary bottle capper is available. On-site viewing is possible.

Key data: 1250 mm, 1400 mm

Inv. Num. : 8970 Type: BT 1250 C2 Producer: TOS HULIN Created: 2016 Parameters: Switch-on hours: 15429 h Equipment: C-axis Powered tools Max. turning diameter: 1,400 mm Face plate diameter: 1,250 mm Max. workpiece height: 1,400 mm Max. workpiece weight: 8,000 kg Speed range faceplate: 2–400 rpm (2-stage infinitely variable control) Main drive SIEMENS: 44 kW Driven tools: 4–3,000 rpm Power tool drive SIEMENS: 22 kW Max. cutting force: 50,000 N Dimensions and weight: Machine height: 5,555 mm Space requirement incl. protective cover: 7,470 x 5,725 mm Total weight: approx. 34,000 kg Ideal for heavy-duty machining, energy plant construction and large rotationally symmetrical components.

Key data: 1600 mm, 2000 mm, 1500 mm

Inv. Num. : 8971 Type: BT 1600 S2 Producer: TOS HULIN Created: 2018 Parameters: Switch-on hours: 11910 h Max. turning diameter: 2,000 mm Face plate diameter: 1,600 mm Max. workpiece height: 1,500 mm Max. workpiece weight: 12,000 kg Speed range faceplate: 2–315 rpm (2-stage infinitely variable control) Main drive SIEMENS: 58 kW Max. cutting force: 45,000 N Working stroke ram: 1,060 mm Feeds: Working feed: 1–4,000 mm/min Rapid traverse: 12,000 mm/min Feed per revolution: 0.001–50 mm/rev Threading: 0.01–400 mm/rev Dimensions and weight: Machine height: 5,655 mm Space requirement incl. protective cover: 8,685 x 5,325 mm Total weight: approx. 46,000 kg

Used Used Erector Apsol Ace 30 Hm: Year: 2007 Condition: Good Used Erector Apsol Ace 30 Hm Year: 2007 Speed: 1.500 Boxes | Hour Model: ACE 30 HM Gluer Formats: Boxes of 6 and 12 bottles Safety protections Code: G 78 More details: https://bottlingscout.com

Used Used Packaging Line Ital Pal: Year: 2008 Condition: Good Used Packaging Line Ital Pal Year: 2008 Speed: 5.000 bph Box forming machine Boxes: american Type of closure: with glue Case packer Number of heads: 12 Type of heads: fixed heads Box closing machine Safety protections Code: JM 87 More details: https://bottlingscout.com

Used Used Feed Boxes Bortolin-Kemo: Year: 2004 Condition: Good Used Feed Boxes Bortolin-Kemo: Model: feed boxes Year: 2004 Speed: 15.000 b/h Safety protection Code: G 36 More details: https://bottlingscout.com

Used Used Bag In Box Line 3 LT 2012: Year: 2012 Condition: Good Used Bag In Box Line: Case erector: Sacmi Packaging EC 25 ? 2012 Ultra Clean filling: Sacmi Pakim FB-2 ? 2007 Closing: Sacmi Pakim C.R.C.E. bib ? 2007 Handler: Sacmi Pakim ? 2007 Speed on the format 3 LT: 1.200 pz/hour Equipped for 3 liters Safety Protections Gluer Case Erector MELER Micron 4/2 120P ? 2012 Gluer Closing machine MELER Micron 4/2 100P ? 2007 Conveyors boxes included Codice: OP 10 Code: OP 10 More details: https://bottlingscout.com

A 3-compartment filter housing is sold On request and for an extra charge with new filter elements

8-fold cartridge filter housing with new filter elements on request for an extra charge

Key data: 5000 mm, 8000 mm, 4000 mm

Berthiez Vertical Turning Lathe • Year of manufacture: 1982 • CNC type: older system (CNC axes) Dimensions and Working Parameters • Table diameter: 5000 mm • Maximum turning diameter: 8000 mm • Maximum turning diameter at center: 5000 mm • Maximum workpiece height: 4000 mm • Ram travel (T): 3600 mm • Saddle travel (TA): 650 mm Speed and Power • Table rotation range: 0.6 – 60 rpm • Table motor power: 140 kW • Maximum load on hydraulic support: 160 t • Ram feed speed: 400 mm/min • Saddle feed speed: 2500 mm/min • Spindle rotation for milling: 0.01 – 0.50 rpm • Positioning speed: 0.001 – 0.50 rpm Tool Carriages 1. Hand-Operated (Primary) Carriage • Kulannum section size: 360 × 360 mm • Axial travel (CA): 2500 mm • Horizontal travel (CB): 3400 mm • Tilt range (E-F): 15° – 45° 2. Side Tool C ...

Item condition: well maintained, fully functional Availability: immediately Pick-up: via truck with lifting platform

Used Used 2001 Robino&Galandrino pvc 3.000 bph: Year: 2001 Condition: Good Model: Vulcan 3000 L Year: 2001 Direction: clockwise Suitable for PVC capsules Max speed: 3.00 bph Plate capsule magazine Machine speed adjustable with potentiometer Entry Cap presence control Safety protections Code: BC 383 More details: https://bottlingscout.com

Used Used Bertolaso Natural Straight Cork: Year: 1994 Condition: Good Model: s. Gloria 500 r Year: 1994 Speed: 1,500 bph Direction: clockwise Single-head corker for still wine in glass bottles Diameters of bottles: ?130mm, h360mm Vacuum system before corking Head adjustment: manual Cork diameter and height measurements: ? 31 mm x h 48 mm Safety protections Complete with vacuum pump Machine dimensions: 1000mm x 800 mm, h 2300mm Code: X 451 More details: https://bottlingscout.com

Various spare parts for capsule filling machine BOSCH, type GKF1500.

Pneumatic can opener, make Edlund, type 625 M, powerful compressed air operated lid punch, (crown punch),, industrial can opener for large cans,, self-sufficient can opener for industrial use,, Output: approx. 2,000 cans per day, Characteristics:, completely made of stainless steel, for thorough cleaning can be hosed down from top to bottom, IP 65,, Suitable for opening cans of almost any size thanks to the height adjustability, Two - hand - operation, Compressed air requirement: 56.6 l / min at 6 bar,, format range:, minimum box height: 40 mm,, max. box height: 300 mm,, max. can diameter: 230 mm,, Info:, - Existing punching crown for can diameter 153 mm, - Additional punching crown optional, - With magnetic lid remover

metal detector spec. for jars, make Loma type IQ4, year 2005/2021, With search head, make LOMA IQ4 (search head - opening: width: 150 mm, height: 250 mm), Search head design: stainless steel housing, protection class IP 69k,, · 3-frequency technology to better adapt to different product effects and package sizes, Conveyor belt year 2005, unused, with Intralox tape, IP 67,, ejection by means of an air nozzle,, Drive with Danfoss frequency converter,, · Output: up to max. approx. 200 packs / min., Tape data:, Protection class: IP 67, · Total length: approx. 2,000 mm,, Useful width of the Intralox belt: 100 mm,, · Lockable box for rejected products, Plastic side guide in the inlet: length: 560 mm, height: 130 mm,, · With transfer rollers in the infeed and outfeed for gentle transfer of the containers.

The GPI Marksman 1600 is a high-performance cartoning system engineered for precision and speed in beverage packaging. Ideal for high-throughput operations, it handles a variety of formats including: 4 x 330ml sleek cans 4 x 500ml cans 4 x 250ml cans 8 x 250ml cans Reliable and efficient, the Marksman 1600 offers consistent performance for multipack applications, making it a versatile solution for breweries, soft drink manufacturers, and co-packers seeking flexibility without sacrificing speed. The System comes with Spare parts and is available now

A complete Respecta epoxy resin metering and casting system is available. 1) Big bag station for supplying fillers, max. particle size: 0.7mm, max. bulk density: 0.5g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, volume: approx. 230l. Including level sensors and automatic IBC filling. 4) Volumetric metering to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring of the resin temperature and the epoxy hardener, viscosity range: approx. 350-450mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting unit, volume: approx. 50l. Overall system control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC, overall system casting capacity: approx. 30l/min. ...

Ready-to-use, well-maintained film wrapping machine SOLLAS type 17, with tool for cartons height 65 mm x width 75 mm x length 137 mm. Max. size cartons height 85 mm x width 200 mm x length 300 mm. cycles 40/min, storage belt L 1600 mm, built in 1989, for processing sealable polypropylene film. No tear tape possible. The machine was in production until March 2024. More information on request. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Packaging capacity: approx. 30pieces/min, side belt height: 50mm, max. carton dimensions X/Y: 515mm/505mm, min. carton dimensions X/Y/Z: 140mm/90mm/80mm, tape width: 50mm, weight: approx. 200kg. An on-site inspection is possible.

Folding Unit – Lang Apparatenbau (Switzerland) For sale is a high-quality folding unit manufactured by Lang Apparatenbau, Switzerland, a company well known for precision mechanical solutions used in the printing, packaging and paper converting industry. The unit is designed for precise and reliable folding operations and can be easily integrated into existing production lines. Technical details Manufacturer: Lang Apparatenbau (Switzerland) Number of fold plates: 4 First fold plate adjustment: up to 450 mm Table extension: up to 600 mm Robust mechanical construction ensures long service life and consistent folding quality. Additional equipment A major advantage of this offer is the large amount of spare parts and additional fold plates included in the package. This allows flexible setup and long-term operation. The machine is in very good technical condition.  ...

We are offering for sale a cable recycling plant .The plant is composed of the following elements: Main Granulator - Manufacturer: IRS SRL - Model: Easy - Type: 180 - Installed power: 8.8 kW - Year of manufacture: 2021 - CE certified Pre-Shredder - Manufacturer: ISVE - Model: MS 2260 Matching Conveyor Belts Find more here - / Contact us at -

faceplate diameter: 1400 mm swing diameter: 1600 mm turning height: 1200 mm turning speed range - milling: 1 - 240 U/min Control: Siemens SIN 820T ram head - cross travel: 1000 mm total power requirement: 55 kW weight of the machine ca.: dimensions of the machine ca.: m A.T.C. 12 positions Tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mm swing diameter: 2700 mm turning height: 1600 mm turning speed range - milling: 1,18 - 32,5 U/min turning speed range - milling: 4,25 - 117 U/min workpiece weight: 10000 kg side head - cross travel: 800 mm ram head - cross travel: 45 degrees - 1000 mm ram head - cross travel: 30 degrees - 1000 mm total power requirement: 80 kW weight of the machine ca.: t dimensions of the machine ca.: m 2-Axis D.R.O. 5 positions turret The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24 camshaft tappets with the partnr. 483182 for sale.

Used cartoning machine with sealing device made by Italian company SIAT, model F144 DX. New: 2006.

Relco MICS 2 Induction cap sealing machine Serial: 3493 2018, The MICS-2 is a powerful self contained induction cap sealing machine designed to fit into most line arrangements without modification. Its in-built castors allow the machine to be moved easily from line to line. Stainless construction, seals 20mm - 110mm diameter caps. ask for further spec.

For packing ampoules in trays and trays in folding cartons. The ampoules are first packed in trays (5 ampoules), and these trays are then packed in folding cartons by the cartoner. • Format range for folding cartons: W 35\endash90, H 15\endash95, L 65\endash150 mm • Output: max. 150 folding cartons/min, cycled • Product feed: Ampoules in trays, 5 ampoules per tray • For double-sided flap, hot melt, Nordson Problue 7 • With format sets for 1, 2, 3, 5, 10 ml ampoules in accordance with DIN EN ISO 9187-1 • Centrally adjustable chain • Filling inspection Scanware Lynx Signum CL (built in 2020) • Operation via B&R HMI touch panel • Friction feeder for inserting brochures • Reject ejection with ejection countercheck • Servo drives with B&R servo controller Acopos • IPC B&R X20 • Modem for remote monitoring • Electronic batch protocol with audit trail • 21 CFR  ...