tor used for sale

Torsionally flexible claw coupling, elastomer coupling, claw coupling JAKOB EKM 60 shaft diameter: Ø 15 / 24 mm 2x divided e Clamping hub Clamping hub diameter: Ø 60 mm, thickness: 22 mm Material: aluminum, elastomer (sprocket ) Coupling diameter: Ø 60 mm New Dimensions( single coupling ): 61 x 60 x 60 mm Dimensions( packaging ): 80 x 72 x 70 mm

Torsion gauge, force gauge PAGUS, PESOLA 0 - 10 kp (kg) pitch: 0.1 kg shaft diameter: Ø 12 mm measuring wheel diameter: Ø 40 mm Measuring distance: 140 mm used ! Dimensions: 620 x 310 x 140 mm

Torque transducer ASI DATAMYTE 1KFM0025 5206.1212.0020 max. 20 Nm 18.68 Nm / 2 mV Square mount: 6.5 x 6.5 mm used, tested ! Dimensions: 72 x 68 x 31 mm

Torque limiter, slip hub, slip clutch, safety clutch MORSE 250M TORQUE LIMITER shaft diameter: Ø 20 mm shaft width: 48 mm groove width: 6 mm with double sprocket: Ø 70 / 90 mm, width: 4.5 mm, 21 teeth new ! Dimensions: 90 x 90 x 48 mm

Torque limiter, slip hub, slip clutch, safety clutch PAGUS Ø 170 x 95 mm TORQUE LIMITER shaft diameter: Ø 28 mm shaft width: 95 mm for sprocket with bore diameter: Ø 100 mm New ! Dimensions: 170 x 170 x 95 mm

Torque limiter, slip hub, slip clutch, safety clutch FLEXTORY GERMANY FT700 TORQUE LIMITER shaft diameter: Ø 60 mm shaft width: 98 mm groove width: 18 mm for sprocket with bore diameter: Ø 95 mm New ! Dimensions: 180 x 180 x 98 mm

Strong cutting torch ZIS, MWW ZIS485 Torch neck length: 0.7 m inclusive Nozzle set for cutting range: up to 300 mm Acetylene pressure: 0.5 bar Heating oxygen pressure: 2.0 bar New ! Dimensions: 1000 x 200 x 100 mm

Cutting torch, for flame cutting machine AUKA REKORD Burner neck length: 200 mm Burner neck diameter: Ø 25 mm Gas connection: G 3/8 L Oxygen connections: G 1/4 R New ! Dimensions: 355 x 115 x 75 mm

Torque wrench with square socket, reversible KNIPEX 9843 Torque range: 8 - 54 Nm insulated up to 1000 V Inner square: 1/2 ( inch ) used, tested ! Dimensions: 325 x 50 x 52 mm

Torque transducer, torque sensor KISTLER Type 5413-1803 Art. -No.: 90370005 measuring range: 0 - 50 Nm connection cable: approx. 5.0 m, with plug square holder: 10 x 10 mm ( 3/8 inch ) with rotating measuring shaft used, tested ! Dimensions ( without cable ): 82 x 65 x 45 mm Dimensions (packaging): 250 x 250 x 60 mm

Torque Transducer, Torque Sensor KISTLER Type 5413-1805 Art. -No.: 90370007 measuring range: 0 - 150 Nm connection cable: approx. 5.0 m, with plug square mount: 12.5 x 12.5 mm ( 1/2 inch ) with rotating measuring shaft used, tested ! Dimensions (without cable): 88 x 65 x 45 mm Dimensions (packaging): 250 x 250 x 60 mm

Torque Transducer, Torque Sensor KISTLER Type 5413-1407 Art. -No.: 90380104 Measuring range: 0 - 500 Nm connection cable: approx. 5.0 m, with plug square holder: 19 x 19 mm ( 3/4 inch ) with fixed measuring shaft used, tested ! Dimensions ( without cable ): 102 x 59 x 50 mm Dimensions (packaging): 250 x 250 x 60 mm

Torque wrench, torque tool -Recording: 1/2 inch -Torque: 4-13 mkp -Dimensions: 630/110/H40 mm -Weight: 1.2 kg

Heating torch, flame straightening torch -Fuel gas/oxygen -Nozzles: 5 -Nozzle distance: 30 mm -without handpiece -Number: 1x burner available -Price: per piece -Dimensions: 570/210/H90 mm -Weight: 1.3 kg

Flame cutting machine, torch, oxy-fuel cutting machine -Shaft diameter: 28mm - Shaft length: 200mm - Rack length: 140 mm -Total length: 320mm -Socket diameter: 42 mm -Weight: 2kg

Torque wrench, torque tool -Manufacturer: Stahlwille, torque wrench manoscope type 721NF/100 -Intake: 3/4 -Torque: 300 - 1000 Nm -Accessories: incl. see photos -Transport dimension: 880/150/H90 mm -Weight: 20 kg

Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench, rivet gun, rivet gun, blind rivet gun, -Drive: torque module for Hilok assembly -Torque: adjustable via touch screen -Number of press-in cylinders: 1 piece -Number of helical gears: 1 piece -Working platform: 800 x 500 mm -Travel: Y 400 mm, X 955 mm -Dimensions: 1555/1470/H2110 mm -Weight: 794 kg

Flame cutting machine, torch, oxy-fuel cutting machine -Shaft diameter: 30 mm -Shaft length: 220 mm (260 mm with sleeve) -Total length: 405 mm -for: 16 mm nozzle diameter -Weight: 1.3 kg

Measurement data acquisition device, test device, telemetry system -Axon: J1-CS10 Torque Telemeter -Dimensions: 205/60/H110 mm -Weight: 0.8 kg

Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench -Torque module: for mounting water meters or other screw connections -Frequency converter: from Yaskawa type VARISPEED 616G5 -Mounting device: for water clocks -Speed and torque: adjustable -various Recordings: for water clocks -Dimensions: 1500/650/H2060 mm -Weight: 314 kg -The two geared motors each have a power: of 1.5 kW and a speed of 38 rpm -Dimensions: 880/600/H920 mm -Weight: 132 kg

Torque Transducer, Torque Sensor URYU SEISAKU, LTD. JAPAN Type UMS-30-19 Measuring range: 150 - 300 Nm connection socket slightly damaged square socket: 19 x 19 mm ( 3/4 inch ) with rotating measuring shaft used, tested ! Dimensions: 143 x 92 x 61 mm

Mori Seiki NL 2500 SY. Year 2008. 5 axis machine. Sub-spindle. Turret with 12 stations all of them motorized. Y-axis travel +- 60 mm. C-axis on both spindles. Integrated main spindle motor 18,5 KW. Integrated sub-spindle head motor 11 KW. Direct motor for driven tools 5,5 kW. Motor starting torque 640 N/M. Motors without belts or steps. Main spindle size A2-8. Secondary spindle size A2-6. Bar pitch 80 mm. Main spindle chuck Kitagawa B-210 of 250 mm with metric system. Kitagawa B-165 sub-spindle chuck 170 mm with metric system. Prismatic guides on all axes. Main spindle speed 4.000 rpm. Speed of motorized tools 6.000 rpm. Turning diameter 755 mm. Machinable diameter 365 mm. Machinable length 755 mm. Oil cooler for both Daikin spindles. Mapps 4 automatic conversational programming system. Automatic effort control and tool consumption monit ...

Bosch Rexroth - 63x10Rx6 A-No.: 000940968393

1x KGT 50x5Rx3,5, S.Nr.: 000940968392 1x KGT 50x25xRx1329x75x146xFxF,

Description: ATLAS COPO RT20 Hydraulic Torque Wrench with accessories Approx. Onsite Dimension. (l x w x h): 420 x 251 x 170 mm, weight approx.: 200 kg

Description: Adjustable 10-60 Nm Approx. Onsite Dimension. (l x w x h): 400 x 400 x 100 mm, weight approx.: 15 kg

tester, torque wrench, torque tool, torque wrench tester, torque wrench tester -Manufacturer: Norbar, Digital torque tester with case -Type: TruCheck 2 Plus -Part No.: 43521 -Measuring range: 3 - 65 Nm -Mounting: 3/8 -Accessories: see photos -Dimensions: 205/60/H110mm -Weight: 3.8 kg

Extraction system Donaldson Torit DCE-DEFPRO 16 Year of construction: 2011 Power: Motor 22 kW, approx. 16,000 cbm/h, Net weight: approx. 2200 kg Facility immediately available.

Material: Stainless steel Built: 1993 Content: 1770 ltr Pressure inside: 0.5bar Pressure outside: 10bar Weight: 5000 kg L x W x H: 4700mm/900mm/1200mm An indirect heat exchanger with mechanical material transport. Very good condition. YOU ARE A NEW, OUTDATED AND USED

CNC plasma cutting system working range: 1500 x 3000mm OTC Superplasma 12000 Cutting up to 20mm quality cutting New control ProDNC from Micompan data transfer via USB; ready to use

CNC plasma cutting system Work area: 1500 x 3000 mm OTC Super plasma 12000 Cut quality cutting up to 20 mm New control ProDNC from Micompan Data transfer via USB

Make: LDF LONGONI, plug-in ready Height: 190 cm - with integrated refrigeration unit, refrigerant R404A - with shelf (5 pcs.)

No.2 "O.M. LESMO" No.2 CORDATRICI TORSION "O.M. LESMO" TORSIONE BOBINE 1250 MM No.9 CONSS FOR BOB DIA 1250 AND No. 9 TRANSPALLET ECLTS No.5 BAR ABAR WITH BILANCINO FOR BOB - 1000

High-pressure cleaning device, high-pressure rinsing, high-pressure washer on hot-dip galvanized and painted high-quality steel frames with forklift slacks. PTC Tornado 60/200, 75/150, 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Tornado 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW Tornado 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW Tornado 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW Tornado 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW Tornado 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW DIMENSIONS / WEIGHT: Dimensions and weight with 680l water tank LxWxH: approx. 2.300x1.310x1.310 mm, approx. 640 kg Dimensions and weight with 1000l water tank LxWxH: approx. 2.300x1.310x1.630 mm, approx.  ...

- High pressure cleaner PTC Torpedo Eco Compact 16/200 and 21/160 similar but no Dynajet, Oertzen, Falch, DIBO, - Cold water / hot water approx. 95°C, steam 32 bar to 140°C and chemical-free weed-killing function with approx. 99°C The following models are available: - Torpedo Eco Compact 16/200 | 16l/min. at 200bar | Diesel engine: Yanmar L100N 8.5kW - Torpedo Eco Compact 21/160 | 21l/min. at 160bar | Diesel engine: Yanmar L100N 8.5kW - Dimensions and weight without water tank: 1200x930x1080mm, approx. 230kg - Dimensions and weight with 300 l water tank: 2000x1050x1100mm, approx. 300kg - Dimensions and weight with 500 l water tank: 2000x1050x1100mm, approx. 350kg Bhdw89emgf - 80/100 kW diesel burner with electronic temperature control - High pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hours - Manometer - Pressure regulator - Safe ...

- High pressure cleaner PTC Torpedo Compact 21/250, 21/350 and 15/500 similar but no Dynajet, Oertzen, Falch, - Cold water / hot water approx. 95°C and steam 32 bar to 140°C + high pressure steam up to 150°C at 200 bar (only for versions with 250 and 350 bar) and chemical-free weed-killing function with approx. 99°C The following models are available: - Torpedo Compact 23/250 | 23l/min. at 250bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23l/min. at 350bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16l/min. at 500bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 hp (high-pressure steam) | 16l/min. at 250bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 hp (high pressure steam) | 16l/min. at 350bar | Di ...

PTC Torpedo Hot Water 140°C and Steam 140°C/32bar Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... - Skid on hot-dip galvanized frames with forklift tabs. The following hot water models are available: Torpedo 21/200 | 21l/min. at 200bar | Engine: Kohler KDW 702 12.6kW Torpedo 23/250 | 23l/min. at 250bar | Engine: Kohler KDW 1003 19kW Torpedo 23/350 | 23l/min. at 350bar | Engine: Kohler KDW 1404 26kW Torpedo 20/500 | 20l/min. at 500bar | Engine: Kohler KDW 1404 26kW Torpedo 30/500 | 30l/min. at 500bar | Engine: Kohler KDW 2204 37.5kW - Dimensions with 680l water tank: 2,300 x 1,310 x 1,310 - Dimensions with 1000l water tank: 2,300 x 1,310 x 1,630 Bhgo2w7wfd - Empty weight: approx. 600 kg - High pressure pump: Comet RW/TW Premium - HD reel: manual or automatic with max. 1/2" or 50 m. 3/8" hose (included) - Water supply reel: manually with 50 m. 3/4" hose - Dies ...

-Hot air oven Torero Store 4 -for 4 sheets 60x40cm -Built in 2012 -10 kw -2 floors Matador Store 6.4 -per floor one sheet 60x40cm -Built in 2012 -per floor 6.7 kW -Base 6.4.600

- High pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, - Cold water / hot water / steam 32 bar to 140°C / high pressure steam 150 or 200 bar to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and weight: 110x64x98cm, approx. 150kg - incl. 10 m high-pressure hose, spray gun, lance and flat jet dues 25°

Multi-turn lathe make HAHN & KOLB type TORNOMAT 2Masch. -No: 668273 Year 1973Working area hexagonal: 3 - 36 mmWorking area 4-edge: 3 - 24 mmhydr. Feed per revolution: 0 - 0.5 mmRapid traverse: 3.7 m / min.Switching time: 1.0 sec.Speed of the rotor: 250/355/450 rpm.Speed of the spindle: 2250/3200/4050 rpm.Drive power: 2.2 / 1.5 kWWeight approx: 1.25 tOutside dimensions approx: 670 x 1530 x 1220 mmWith- Electric control cabinet- Accessories and tool cabinet complete with content- Cabinet with collets- conveyor beltused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Thread cutting machine make REMS type Tornado 2000Fabr. -No: 34022697for the efficient production of pipe and bolt threads, thread cutting, cutting off, deburring, nipple cutting in the workshop and on the construction siteTechnical specifications:Pipe thread size: 3/8 - 2 Speed: 60 rpm.Power connection: 220 V, 50 HzDrive power: 1200 WExternal dimensions L x W x H (without basement): 730 x 435 x 280 mmWeight of the machine without accessories: 31 kgWith- foot switch- thread cutting head- pipe cutter- pipe support- deburrerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Description Tapping machine Rems Tornado Type 2010 220V, 50Hz Second-hand machine Tapping machine for pipe threads (1/16) 1/8 – 2", 16 – 63 mm, Bolt thread (6) 10 – 60 mm, 1/4 – 2". With maintenance-free gearbox, safety foot switch with emergency stop, 2 automatic chucks, automatic lubrication cooling. With tool set, consisting of a universal automatic cutting head for all threads, also long thread, automatically opening, with automatic thread length for tapered threads, cutting jaws for pipe threads tapered ISO 7-1, EN 10226 (DIN 2999, BSPT) R 1/2- 3/4 and R 1 – 2 right, pipe cutter, internal tube deburring device, pressure lever. Height-adjustable material support. Pole-changing capacitor motor 230 V, 50 Hz, 2100 W. 52/26 min-1, also under full load. Very quiet running. Portable, 3 tubular legs, roller support

thread dia.: 1/16 - 2 threading length: 165 mm thread pitch: mm turning speed range: 40 - 53 U/min voltage: 230 V total power requirement: 1,7 kW weight of the machine ca.: 50 kg dimensions of the machine ca.: 1,10 x 1,10 x 1,10 m - Serial-No.: 34024750 - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multi-edge lathe Multi-edge lathe Manufacturer: Hahn + Kolb Type: TORNOMAT 2 Year of construction: 1981 Working range 6-edge: 3 – 36 SW mm Working range 4-edge: 3 – 24 SW mm Maximum turning length: 60 mm hydraulic feed per revolution: 0 – 0.5 mm Rotor speed: 250 / 335 / 450 rpm. Hydraulic pump: 23 l /min. Pressure hydraulic system max.: 45 bar Oil filling 36 cSt/50° C: 125 liters Motor for lubrication pump: 1000 min. -1 Weight without accessories: approx. 1300 kg Space requirement without control cabinet: 1530 x 670 mm Accessories: Collets Knife head

Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Nominal consumption: 650 W -Mains connection: 230 V -Drill -Weight: 15 kg

PFM Flow wrapper Model: Tornado-BBLDSS Serial: C-6096 2001, Stainless, The Tornado LD is a horizontal flowrapping machine that produces up to 100 packs/min with hermetic seals from a flat reel of heat seal wrapping material. The Tornado LD is specifically designed for M.A.P.” (Modified Atmosphere Packaging). with smartdate X40 coder, infeed length 2400mm, flow wrapper length 3200mm, jaw width 220mm, various belt for infeed, 3Ph

Used flow wrapper PFM; Type: Tornado LD SS S Horizontal flow wrapper for gas-tight packs for M.A.P. applications. El. Connection : 380 V, 50 Hz, 17.3 A, 9.7 kW Net weight: approx. 1,800 kg Further data on request. Visits and test runs are possible by arrangement.

Multi-side processing machine, multi-edge automatic lathe KEKEISEN type Tornomat 2 Multi-edge impact lathe for 4-edge and 6-edge machining, square automatic lathe Masch. No. 668 361 Year of construction approx. 1975 Workpiece diameter max. 35 mm Working range 6-edge: max. SW 32 mm Working range 4-edge: max. SW 24 mm Spindle speed 250, 355 , 450 rpm. Mains connection 380 Volt, 50 Hz - equipped with 3 fold knife head for hexagonal hydraulic feed movement 0.1 to 0.5 mm/rev - Hydro-mechanical collet clamping- Workpiece clamping diameter in the built-in collet 10 mm- Control cabinet adjacent (L x W x H 700 x 350 x 1300 mm) Space requirement automatic lathe L x W x H 1250 x 850 x 1250 mm Space requirement on pallet L x W x H 1650 x 850 x 1300 mm Weight 1.4 ton. good condition; used

Working condition - without extraction - saw blade can be placed under 45 degrees - loading options available