6750 results top seal

Category: 107 sheet metal working / Mandrel Pipe Bending Machines
Latest update: 19.04.2026
approved
dealer
item-No.: 167396553
New in: 2014

used

Location: Land-de

tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm bending angle: 0 - 180 ° gas tube pipelines: 2 (60.,3mm) mm speed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kW weight of the machine ca.: 0,7 t - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers / Vertical Processing Centers
Latest update: 19.04.2026
approved
dealer
item-No.: 167397119

used

Location: Land-ch

Control: Manufacture: FANUC 18i-MB x-travel: 510 mm y-travel: 360 mm z-travel: 300 mm table surface area: 600 x 360 mm spindle turning speed - stepless: 12000 U/min dimensions of the machine ca.: 1400 x 2300 x 2300 mmxmmxmm weight of the machine ca.: 2.6 t tool piece magazine with: 24 Plätzen tool piece magazine with: 20 Plätzen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 203 planing machines / Surface planing and thicknessing machines
Latest update: 02.06.2025
approved
dealer
item-No.: 167407801

used

Location: Land-pl
Price: 3.100 €

Key data: 410 mm, 220 mm

Dressing and thickness planing machine TOP Master FS 410 Function tested Working width: 410 mm Max. planing thickness: 220 mm 4-knife shaft Dressing table length: 2000 mm 2 feed speeds Feed and Pull Roller: Steel Table rollers Tiltable stop Very good condition Weight approx. 900 kg

Category: 302 extruders
Latest update: 19.04.2026
approved
dealer
item-No.: 167451196

new

Location: Land-it

TWIN SCREW EXTRUSION LINE, Top Italian Constructor, for PVC both soft and rigid, max infeed 10-12 mm size, forced feeding hopper, dosing unit, 2 parallel, counter-rotating screws 118 mm diam. 25 L/D, pressure control;, nitrided steel barrel with degassing vent 2,2 kW, Barrel heating bands kW 76,00, Extruder cooling barrel motors power 4x 0,37 kw, n.7 Heating zones, Extruder a.c. motor 120 KW, Extruder tot power 205 kw, Extruder average absorbed power 105,00 kW, Extruder rpm 8-45, Lubrication pump 1,50 kW, Electric cabinet with inverter and modem for remote diagnosis, semi automatic screenchanger for PVC, granulating head, die face dry pelletizer, cooling unit, Installation and start up included (boarding and travel costs on Buyers charge), Total installed power: 205 kw - 105 kw average in use

Category: 101 boring mills and machining centers / Universal processing centres
Latest update: 18.04.2026
approved
dealer
item-No.: 167461413
New in: 2008

used

Location: Land-cz

Inv. Num. : 8503 Type: Topper TMV-510T Producer: Tongtai Created: 2008 Parameters: Control system: Fanuc 0i-MF Plus Operating hours: 2532 h Work table length: 600 mm Work table width: 360 mm X-axis travel: 510 mm Y-axis travel: 360 mm Travel Z axis: 300 mm Speed: 8000 1/min Spindle power: 5.5 kW Cone: BT-30 Number of all tools: 20 pieces Number of axles: 5 pieces Rapid traverse X/Y/Z: 48 m/min Machine height: 2310 mm Machine length: 2700 mm Machine width: 1600 mm Machine weight: 2000 kg Equipment: Renishaw tool probe Grips CNC-controlled 5th axis TSUDAKOMA TN-101

Category: 201 saws wood / Band resaws
Latest update: 25.02.2026
approved
dealer
item-No.: 167498225
New in: 1996

used

Location: Land-it

SICAR band saw mod. TOP 9 -Diam. flywheel mm. 900 - Year 1996 - Matr. 008037280596

Category: 1300 other machines and plants
Latest update: 09.02.2026
item-No.: 167633546
New in: 2020

used

Location: Land-my
Price: 6.200 USD

GLOVE'S WATER TIGHT TEST MACHINE MANDRELS : 80 (40 LEFT T5863094 AND 40 RIGHT) TRANSPARENT T5863094 seller offer No. resale 167424183

Category: 702 breadmaking and confectionery machines / Interrupters of fermentation
Latest update: 24.02.2026
approved
dealer
item-No.: 167640264
New in: 2022

used

Location: Land-de

2 pieces HEIN fully automatic proofers, type: TopLine -as good as new- - incl. 2 trolleys, front axle, 20 cushions, 80 x 60 cm - incl. 2 trolleys, front axle, 19 cushions, 80 x 60 cm The 2 proofers are in very good condition. Sold due to closure. Hardly been in use. More pictures and information on request.

Category: 702 breadmaking and confectionery machines
Latest update: 19.04.2026
approved
dealer
item-No.: 167867573

used

Location: Land-nl

Height=1.44 m, Overall length= 1.15 m, Overall width= 2.6 m, Net weight= 98 kg,

Category: 103 milling machines / CNC Milling Centers
Latest update: 23.09.2025
item-No.: 167965793
New in: 2008

used

Location: Land-de

Topper TMV-510 Built in 2008. Travel distances of X = 510 mm, Y = 360 mm, Z = 300 mm. Table surface 600 × 360 mm Controllers Fanuc 0i-MF

Category: 501 granulation plants
Latest update: 19.04.2026
approved
dealer
item-No.: 168015252

used

Location: Land-it

BRUNO FOLCIERI TOP 800, Infeed Size 800x700 mm., Rotor length 800 mm., rotor Ø 530 mm., construction year 1998, 110 kW drive, n.3 rotating blades, n.2 still blades, complete with loading conveyor belt, metal detector, Soundproof case, installed power - used power in work: about 60-65% : 110 kW, availability: 3 weeks from confirmation for reconditioning, working width: 800 mm., conditions: recnditioned, type: heavy duty

Category: 401 filling machines
Latest update: 19.04.2026
approved
dealer
item-No.: 168126882
New in: 2008

used

Location: Land-uk

Tetra Pak tetra top fillers are a type of equipment used in the food and beverage industry for packaging products in Tetra Pak cartons. Here’s some more information about them:, - Purpose: Tetra top fillers are designed to efficiently fill cartons with liquid products, such as dairy, juice, and sauces, in a sterile environment, ensuring product safety and shelf life., - Technology: These fillers utilize advanced technology to maintain hygiene and optimize filling speed and efficiency. They often incorporate features such as easy cleaning and maintenance., - Carton Design: The tetra top cartons have a unique shape that provides good stackability and shelf stability. They often come with a separate opening mechanism, allowing for easy pouring., - Sustainability: Tetra Pak emphasizes sustainability in their products, utilizing renewable materials and ensuring that their packaging can be r ...

Category: 110 accessories for machine tools / Compressors
Latest update: 19.04.2026
approved
dealer
item-No.: 168205252
New in: 1998

used


output: 22 kW suction power: 3.020 l/min turning speeds: 4.860 U/min overpressure: 10 bar dimensions of machine L x W x H: 1,40 x 0,80 x 1,40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 401 filling machines
Latest update: 19.04.2026
approved
dealer
item-No.: 168126883
New in: 2008

used

Location: Land-uk

Tetra Pak tetra top fillers are a type of equipment used in the food and beverage industry for packaging products in Tetra Pak cartons. Here’s some more information about them:, - Purpose: Tetra top fillers are designed to efficiently fill cartons with liquid products, such as dairy, juice, and sauces, in a sterile environment, ensuring product safety and shelf life., - Technology: These fillers utilize advanced technology to maintain hygiene and optimize filling speed and efficiency. They often incorporate features such as easy cleaning and maintenance., - Carton Design: The tetra top cartons have a unique shape that provides good stackability and shelf stability. They often come with a separate opening mechanism, allowing for easy pouring., - Sustainability: Tetra Pak emphasizes sustainability in their products, utilizing renewable materials and ensuring that their packaging can be r ...

Category: 201 saws wood / Edge trimming saws
Latest update: 14.01.2026
item-No.: 168219624
New in: 2025

new

Location: Land-de

JRIMAC Slitting Saw "TOP" - NEW - · Cutting length 2200 - 9200 mm · Cutting width 420 - 2120 mm · Cutting direction left - right (on request right - left) · Cutting height max. 210 mm with high-quality saw blade Ø 620 mm. · Precise and clean cut due to strong, self-supporting welded construction of the machine stand. · Carriage guide via linear guides, with ball-bearing, maintenance-free rollers. · Safety beam mounted above the machine table with 6 mm thick slat protection. · Suction connection Ø 160mm installed at table height at top right and bottom left ready for connection. · Flexible and efficient working thanks to the 250 mm opening of the slat guard above the top edge of the table. · Stepless, frequency-controlled, performance-stable feed of the carriage. · The max. feed speed can be adjusted. · Automatic stepless saw blade height adjustment. · Stepl ...

Category: 1200 machines and plants for process engineering
Latest update: 19.04.2026
approved
dealer
item-No.: 168241763

used

Location: Land-nl

General SKU366W1210 LocationBarneveld MakeQVF Year of construction1999 Specified Features - Distillation Distillation installationcheck Column sizesdia. 225x4440 mm Number of columns:1 With condensercheck Heating surface6m² MaterialBorosilicate Glass 3.3, Glass, Stainless steel 2.4602 (Hastelloy C-22) Information Floorspace0,25x0,25 m Total height5 m Extra SpecificationsPacking CY Hastelloy C22, Top condensor QVF SS-tube condenser (6 m²) DistillationQVF GlasstechnikColumns > DistillationBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Category: 1014 formworks
Latest update: 16.12.2025
item-No.: 168423929

used

Location: Land-at
Price: 41 €

⚙ 🔧 In this package you will find multi-purpose waling WU12 Top50 in various lengths 🚧 The walings have the same function as the multi-purpose walings WS10 Top50. Due to the larger profile dimension, they are suitable for higher loads. The hole pattern is identical to that of the multi-purpose walings WS10 Top50 - they are used to transfer the load and give the formwork element stability and rigidity. Depending on the requirements, the support can be attached to the steel wall bar using different fastening devices. 💡 The multi-purpose walings are bundled on support wood. If required, we will also be happy to take care of the delivery 🚛 or you can simply pick up your multi-purpose walings yourself from the Form-on warehouse. Price: from € 41,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sa ...

Category: 1014 formworks
Latest update: 16.12.2025
item-No.: 168423958

used

Location: Land-at
Price: 4.999 €

Used RINGER Master formwork , galvanized, well-maintained, and ready to use †incl. 3.30  m hinged corner! Only while supplies last. 🟠 👉 Don’t miss out: just €4,999 for the complete set! 🔹 Durable steel panels with plastic facing †clean, long-lasting, ready-to-use 🔹 System compatible †perfect for existing RINGER inventories 🔹 Sustainable & cost-efficient †smart building with second-hand gear ♻ Pre-owned formwork is trending †and just as powerful on-site. Think sustainable, build economically †with used wall formwork that delivers. 📦 It’s that easy: add your package to the inquiry cart †receive your custom quote in no time. 💸 Once paid, we deliver straight to your site or prepare for pick-up. 💡 Buying used formwork? Now it’s easy  ...

Category: 1014 formworks
Latest update: 16.12.2025
item-No.: 168423994

used

Location: Land-at
Price: 1.295 €

Dont miss this deal: Doka floor props Eurex 20 top 250 in ⭐⭐⭐ star quality! 👀 All the advantages at a glance: individually tested - the thread can be opened and screwed together durable thanks to impact protector inner and outer tube hot-dip galvanized easy height adjustment thanks to permanent hole numbering extension length from 1.48m - 2.50m can be loaded with 20kN at any extension length 💡  40 props are supplied in 1 Doka stacking pallet 1.55x0.85m. This is already included in the total price. We will also be happy to supply you with all the other components you need, such as beams, 3-layer panels or even 4-way heads and removable folding tripods. Simply get in touch with us by phone 📞 or email 📧. Price: from € 1295,00 / Stapelpaletten (excl. VAT).Price valid: per full multi-trip container Partial quantity: possible S ...

Category: 1014 formworks
Latest update: 16.12.2025
item-No.: 168424002

used

Location: Land-at
Price: 62 €

⚙ 🔧 In this package you will find multi-purpose waling WU12 Top50 in various lengths 🚧 The walings have the same function as the multi-purpose walings WS10 Top50. Due to the larger profile dimension, they are suitable for higher loads. The hole pattern is identical to that of the multi-purpose walings WS10 Top50 - they are used to transfer the load and give the formwork element stability and rigidity. Depending on the requirements, the support can be attached to the steel wall bar using different fastening devices. 💡 The multi-purpose walings are bundled on support wood. If required, we will also be happy to take care of the delivery 🚛 or you can simply pick up your multi-purpose walings yourself from the Form-on warehouse. Price: from € 62,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sa ...

Category: 1014 formworks
Latest update: 16.12.2025
item-No.: 168424004

used

Location: Land-at
Price: 41 €

Used Doka removable folding tripods top in a very good quality. The folding tripods get used for securing floor props. The Doka tripods show traces of a careful usage. The material is single inspected and professionally cleaned. The material get delivered in Doka skeleton transport box 1.70x0.80m (36 pcs. / box). The transport box is not included in the price / pc. Price: from € 40,30 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suitable for standard up to demanding requirements. 2595 x Removable folding tripod top (Art-No. 586155500), 3 stars, € 40.3 / pc

Category: 1014 formworks
Latest update: 16.12.2025
item-No.: 168424008

used

Location: Land-at
Price: 52 €

⚙ 🔧 In this package you will find multi-purpose waling WU12 Top50 in various lengths 🚧 The walings have the same function as the multi-purpose walings WS10 Top50. Due to the larger profile dimension, they are suitable for higher loads. The hole pattern is identical to that of the multi-purpose walings WS10 Top50 - they are used to transfer the load and give the formwork element stability and rigidity. Depending on the requirements, the support can be attached to the steel wall bar using different fastening devices. 💡 The multi-purpose walings are bundled on support wood. If required, we will also be happy to take care of the delivery 🚛 or you can simply pick up your multi-purpose walings yourself from the Form-on warehouse. Price: from € 52,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sa ...

Category: 109 other metal working machines
Latest update: 18.04.2026
item-No.: 168582239
New in: 2018

used


Manufacturer: Top Automazioni Model: ETL 10-65 Year of Manufacture: 2018 Machine Type : Automatic bar loader CE marked: Yes Technical data Maximum bar length: up to 3200 mm Weight: approx. 2500 kg Configuration and compatibility Originally installed on: Emco Maxxturn 65 Supplied as: Top Load version via Emco, manufacturer is Top Automazioni Included in sale: Bar loader including control unit Condition : The bar loader is in good, age-appropriate condition. No known damage. Fully functional before shutdown. Find more here - / Contact us at -

Category: 109 other metal working machines / End Processing Machinery
Latest update: 23.01.2026
item-No.: 168618462
New in: 2011

used

Location: Land-de
VS

We offer this used Sinico SIN-O-MATIC TOP 2000 saw and end processing machine, built in 2011. Model: SIN-O-MATIC TOP 2000 Type: TR110/2-350-CL-S CNC Serial Number: 1459 Year of manufacture: 10/2011 Weight: 7200 kg (plus magazine) Workpiece diameter: 110 mm Maximum workpiece length: 350 mm Installed power: 65 Max kW CNC control from NUM Automatic machine for cutting to length and machining the ends. Transfer machine with horizontal axis table for cutting and end processing of tubes and bars. Flexible and highly adaptable CNC machine. It guarantees high productivity, up to 2500 parts/hour, and is designed for the machining of small to large workpieces: bar diameters up to 110 mm, finished part lengths up to 350 mm. Maximum versatility in the processing of tubes and rods It is able to carry out the following machining operations Chamfering – Face Milling – Threading ...

Category: 201 saws wood
Latest update: 19.04.2026
approved
dealer
item-No.: 168660361
New in: 2018

used

Location: Land-es

This MACMAZZA Top Saw was manufactured in 2018. Ideal for precise panel cutting, this panel saw represents a reliable choice for your woodworking needs. Contact us for more information.

Category: 109 other metal working machines
Latest update: 19.04.2026
approved
dealer
item-No.: 168682111
New in: 2000

used

Price: 680 €

current intensivity: 475 A water cooling unit: ja weight of the machine ca.: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 202 milling machines wood
Latest update: 19.04.2026
approved
dealer
item-No.: 168660392
New in: 2020

used

Location: Land-pl

This 3-axis COMEC MD TOP XL CNC Wood Machining Centre was manufactured in 2020. It features a robust mono-block structure, high-speed axes positioning up to 70 m/min, and versatile electro-spindles for drilling, milling, and cutting. The machine includes a CAD-CAM control unit with a 17 touchscreen and full safety enclosures. If you are looking to get high-quality woodworking capabilities, consider the COMEC MD TOP XL machine we have for sale. Contact us for more information.

Category: 202 milling machines wood
Latest update: 19.04.2026
approved
dealer
item-No.: 168660394
New in: 2024

used

Location: Land-de

This 3-axis COMEC MD TOP XLS CA2 was manufactured in 2024. Ideal for precise and efficient woodworking, this CNC Wood Machining Centre is a robust choice for professionals. Consider the opportunity to buy this COMEC MD TOP XLS CA2 CNC Wood Machining Centre. Contact us for more information.

Category: 103 milling machines / CNC Milling Centers
Latest update: 17.02.2026
approved
dealer
item-No.: 168757807
New in: 2011

used

Location: Land-de

Tongtai / Topper TMV - 720 A / Fanuc OI-MD Vertical Machining Center -CE marking -Year of construction 2011 -Control Fanuc Oi-MD -Travel X / Y / Z 720x480x530mm -Distance spindle nose / table 100-630mm -Table size 800x480mm -Max. table load 500Kg -Spindle holder BT-40 -Spindle speed 8000 rpm -Spindle motor 7.5 / 5.5 KW -Rapid traverse X / Y / Z each 48 M/min -Feed speed 1-10000 MM/min -Tool changer / 24 compartment -Tool change time (T-T) 3 sec. -Max. tool weight 7Kg -Max. tool diameter 80mm -Work light -Coolant device -Chip conveyor -Electric handwheel Dimensions: LxWxH 2.8x2.2x2.8 meters / Weight 4400Kg

Category: 209 other wood working machines
Latest update: 19.04.2026
approved
dealer
item-No.: 168660511
New in: 2015

used

Location: Land-de

This Hebrock TOP 2000 PLUS was manufactured in 2015. A used edge banding machine, it features a gluing unit, cutting unit, and combination milling unit. It handles edge material thickness from 0.5 to 3 mm and can manage workpieces from 10 mm to 45 mm in thickness. Ideal for precise edge finishing tasks. Contact us for more information about this machine.

Category: 205 boring mills, machining centers / Dowel hole drilling machines
Latest update: 20.02.2026
approved
dealer
item-No.: 168758852
New in: 2008

used

Location: Land-it

SCM multiple drilling machine model TOP35E PLUS: - drilling from above, with electro-pneumatic positioning of the drilling head, tiltable at all angles from 0 to 90° - with digital displays for horizontal and vertical positioning, and 0–90° rotation of the drilling unit (with decimal magnetic strips) - 35-spindle drilling head with quick couplings - Drilling head with 2 motors, total power kW 4.4 (HP 6) - Motor for head rotation kW 0.26 (HP 0.35) - maximum stroke of the drilling unit 127 mm - 6-position drilling depth revolver - hydraulic brake with 50 mm adjustable stroke - Worktop dimensions 1255 x 500 mm - min. thickness / max. of panel 10 / 70 mm - 4 pressure pistons for locking the panels - with aluminium guides and reference stops - with 45-degree horizontal drilling guide - overall dimensions about 1.7 x 1.5 x h = 1.7 m Year 2008, machine according to CE regulat ...

Category: 2305 other automation equipment
Latest update: 19.04.2026
approved
dealer
item-No.: 168660756
New in: 2020

used

Location: Land-pl

This TOP Automazioni FUSION 352 SX was manufactured in 2020. It is a single-channel bar feeder supporting bar lengths up to 3200 mm and diameters from 8 to 50 mm. Features include a tray width of 235 mm and a manual axial shift for easy spindle access. Dimensions are 4375 x 9000 x 1545 mm, weighing 1200 kg. Consider the opportunity to buy this TOP Automazioni FUSION 352 SX. Contact us for more information.

Category: 409 other packaging machinery
Latest update: 18.04.2026
item-No.: 168729203
New in: 2022

used


Manufacturer: Widmann Model: SI 100 - Top Year of Manufacture: 2022 Certification: CE Electrical Data: - Apparent Power: 42 kVA - Frequency: 50/60 Hz - Voltage: 3 x 400 V / N / PE - Current: 80 A Machine Cycles: 695,067 - Total Cycles: 810,321 - Total Operating Hours: 268 h Find more here - / Contact us at -

Category: 107 sheet metal working
Latest update: 19.04.2026
approved
dealer
item-No.: 168791884
New in: 2011

used

Location: Land-lv

This ERCOLINA Megabender TOP 030 die bending machine was manufactured in 2011. It features a maximum pipe diameter of 2 (60.3 mm) and a pipe slide length of 3,000 mm. With 30 programs and the capability to work with various materials, consider the opportunity to buy this ERCOLINA Megabender TOP 030 die bending machine. Contact us for further details.

Category: 1300 other machines and plants
Latest update: 19.04.2026
approved
dealer
item-No.: 168799069
New in: 1990

used

Location: Land-de

A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction ro ...

Category: 201 saws wood / Bandsaw machines
Latest update: 24.02.2026
approved
dealer
item-No.: 168801104
New in: 1991

used

Location: Land-it

SIPA Band Saw Model 800 TOP made of steel: - upper spoke flywheel, full lower flywheel - Motor 4 kW / 5.5 HP, 380 volts - with upper and lower blade guide - tilting table

Category: 203 planing machines / Thicknessing machines
Latest update: 03.03.2026
approved
dealer
item-No.: 168816648

used

Location: Land-it

Code: 0304 Brand: CASOLIN Model: TOP 530 Automatic thickness planer for carpentry workshops, furniture, custom-made furnishings, wooden carpentr, , wooden window frames , plastics and various materials Technical data: Cast iron table supported by four ground columns with inner rise screw sinchronously 4-speed feeding system Steel feed rollers Useful working width 530 mm Max working height 300 mm Min working height 3 mm Useful thickness 8 mm N° 4 knives Feed speed 4-7-11-17 mt/min Main motor 5,5 Hp Automatic table lifting Overall dimensions mm 960 x 1080 x 1110 h Weight kg 970

Category: 403 labeling machines
Latest update: 19.04.2026
approved
dealer
item-No.: 168856602
New in: 2017

used

Location: Land-nl

VWS Nederland – Top/Base Labeling Machine (R → L), Manufacturer: VWS Nederland, Type: Top / Base Labeling Machine (Right → Left), Year of manufacture: 2017, Description, The VWS Nederland Top/Base Labeling Machine is designed for automatic labeling of products on both the top and bottom sides. The system operates from right to left (R → L) and is suitable for integration into automated packaging and production lines., This labeling system is commonly used in the food, pharmaceutical, and consumer goods industries where accurate and consistent label placement is required., Technical Specifications, - Manufacturer: VWS Nederland, - Machine type: Top and bottom labeling machine, - Labeling direction: Right → Left (R → L), - Label positions: Top and base (bottom), - Year of manufacture: 2017, - Application: Automatic labeling of trays, containers, and packaged products, - Integra ...

Category: 706 beverage machines
Latest update: 19.04.2026
approved
dealer
item-No.: 168856649
New in: 2011

used

Location: Land-de

Overview This KRONES Topmatic labelling machine was manufactured in 2011 and was previously operated in a returnable glass production line. The machine is designed as a head machine with parallel bottle infeed and discharge and is suitable for high-speed labelling applications. The system is equipped with two labelling aggregates: one for neck and front labels and one for back labels. The neck label is applied using hot glue for closure sealing, while the remaining labels are applied using cold glue. The machine is fitted with two glue pumps and includes one spare hot glue unit. The back labelling station is disengageable, while the front station is permanently installed. With 36 bottle plates and a production capacity of up to 33,000 bottles per hour, the machine is suitable for demanding returnable glass operations. The machine has accumulated approximately 44,350 operating hours as of ...

Category: 201 saws wood
Latest update: 24.03.2026
approved
dealer
item-No.: 168922465
New in: 1999

used

Location: Land-be

Table dimensions 1080 x 700 mm, 30? tiltable Wheel diameter 800 mm. Wheel width 40 mm. Max. cutting height 350 mm. Max. cutting width 660 mm. Cutting length: 5620 mm. Motor power 4 kW. Extraction nozzle diameter 120 mm.

Category: 205 boring mills, machining centers / Dowel hole drilling machines
Latest update: 25.03.2026
approved
dealer
item-No.: 168928712
New in: 2002

used

Location: Land-it

SCM multiple drilling machine model TOP35: – drilling from above, with motorized positioning of the drilling head, tiltable at all angles from 0 to 90 ° – 35-spindle drilling head with threaded connections – drilling head with 2 motors, total power kW 4.4 (HP 6) – motor for head rotation kW 0.26 (HP 0.35) – maximum stroke of the drilling unit 127 mm – 6-position drilling depth revolver – hydraulic brake with adjustable stroke 50 mm – worktop dimensions 1255 x 500 mm – min. thickness / max. of panel 10 / 70 mm – 4 pressure pistons for locking the panels – with 1500mm aluminum guides and reference stops – overall dimensions about 1.7 x 1.5 x h = 1.7 m Year 2002, machine according to CE regulations Good overall condition VISIBLE INSTALLED AND OPERATING UNTIL JUNE 2026

Category: 815 presses: digital
Latest update: 25.03.2026
approved
dealer
item-No.: 168928774

used

Location: Land-de

Linotype-Hell AG Flat Bed Scanner It has a 5080 dpi true optical resolution, a 4.0 d-max, and can easily accommodate materials up to 12? x 18? in size. The quality of its film scanning rivals that of any drum scanner.

Category: 409 other packaging machinery
Latest update: 18.04.2026
item-No.: 168959091

used


Manufacturer: GAI Model: 1730 TOP Type of Machine : Automatic bottle filling and corking/capping machine - Designed for still wine production from 1,000 to 3,000 bottles per hour - Functions include rinsing, deaeration, gravity filling, inert gas injection, and vacuum corking - Stainless steel construction with CE certification - Single-head corker Find more here - / Contact us at -

Category: 706 beverage machines / Labelling machines
Latest update: 01.04.2026
approved
dealer
item-No.: 168968596
New in: 2018

used

Location: Land-pl

Krones Topmatic Year of manufacture: 2018 Output: 45,000 bottles/pc / 500ml

Category: 204 grinding machines wood / Wide belt grinding machines
Latest update: 01.04.2026
approved
dealer
item-No.: 168968580

used

Location: Land-at

Kündig ENORM PRIMO – TOP CONSTANT TABLE MACHINE / automatic Headhead delivery Wide-belt calibration fine grinding machine Combination unit contact roller and pneum. - Sanding pad unit Enormatic Digital thickness display for workpiece thickness Belt drive motor power approx. 9 kW Contact roller level infinitely variable according to grain scale Infeed table and run-out table with roller support Working width 1100 mm Feed speed 2.5 - 15 m/min Machine is WORKSHOP OVERHAULED from stock Lieboch  

Category: 1107 other energy machinery
Latest update: 18.04.2026
approved
dealer
item-No.: 169148953

used

Location: Land-de
Price: 640 €

fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger with attachments -Type: Top 4000 2-stage 153000452036 -Power: 20.3/23.3 kW -Operating pressure: max 10 bar -Number: 2x air heaters available, 1x with additional bracket -Price: per piece -Dimensions: 700/680/H1020 mm / 700/680/H900 mm -Weight: 45 kg / 40 kg

Category: 1707 other computer and office equipment
Latest update: 18.04.2026
approved
dealer
item-No.: 169175467
New in: 2021

used

Location: Land-de

Filter system, air conditioning unit, air conditioning, fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Filter unit (from an air conditioning system) -Manufacturer: Wolf -Type: KG Top 4040 -Power: Fan 4x 5.0 kW -Volume flow: 47000 m³/h -Dimensions: 2950/2800/H2800 mm -Weight: 1400 kg

Category: 1403 other storage equipment
Latest update: 18.04.2026
approved
dealer
item-No.: 169196990

used

Location: Land-de
Price: 25 €

Impact protection, crash protection, shelf protection, column protection, column impact protection, shelf impact protection, corner crash protection -Manufacturer: Topregal, shelf impact protection, corner guard -Type: L-shape -Height: 400 mm -Quantity: 3 pieces available -Price: €70 per piece/ for the whole set. -Dimensions: 240/120/H400 mm -Weight: 3.1 kg/piece

Category: 204 grinding machines wood
Latest update: 18.04.2026
approved
dealer
item-No.: 169256519
New in: 1994

used

Location: Land-de

Manufacturer: DMC Breitbandschleifmaschine, Type: Topsand, Year: 1994, Monting of the machine: Walze/Schuh/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Shore roller 1: ca.85, Längsschleifaggregate: 22,5, Belt 2 shoe unit: 15, Belt 2 synchronous and reverse run: 15, Belt 4 pressure segment belt: no, Combi unit roller/shoe: 8-25, Table hight adjustment by engine: ca.5, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: Struckturbürste von unten, Vacuum table: Bürste, Pressure pads for short workpieces: 180, Segment sanding shoe: von Unten, Year :1994

Category: 109 other metal working machines
Latest update: 19.04.2026
approved
dealer
item-No.: 169268713

new

Price: 39.500 €

: neu : ca. 8 Wochen ab Auftragse : Italien : 39500 € : 754.45 € : 127 mm : 850 mm : 1200 mm : 850 mm : 720 kg : 80 cm³ : 127 x 7,1 mm : 4 x 8,56 mm : 127 x 7,1 mm : 114,3 x 5,6 mm : 114,3 x 5,6 mm : 139,7 x 8,8 mm : 139,7 x 8,8 mm : 64 x 6 mm : 88,9 x 3,65 mm : 50 x 4 mm : 90 mm : 130 x 25 stehend, 130 x 6 mm : 700 mm : 36 mm : 10 mm : 0 - 0,75 U/min : 3.5 kW digital read out for bending angle 4 hexagonal tool holders (40, 50 80 and 110 mm) Possibility to bend left and right Users manaul Tools on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

maximum number of results exceeded
please refine your search

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information