tools windows used for sale

Welding Machine Urban Plastic Window Welding Machine Type: AKS 3610 Year of manufacture: 2/92 Connected load 2.7 kW Mains voltage 220 V, 50/50 Hz Operating pressure 8 bar Air requirement per weld/stroke 15 l at 6 bar Adjustment range angle 30° - 180° Profile height min. 30 – max. 105 mm Profile width at 90° max. 157 mm Compressed air connection NW 8, 7 bar - Heated blade bead limitation 0.2 mm - Angle welding from 30° - 180° with excellent accuracy. - Above-average welding results of the AKS 3610 for acrylic and foil-coated profiles. - Optimization of the welding result through parallel welding processes. - Individual setting of all welding parameters - Quick change of the outer contour allowances with holding magnets. Machine dimensions: L 770 mm x W 880 mm x H 1500 mm Weight: 320 kg

Wing Attachment Table Dimensions approx. L 2700 mm x W 1300 mm with glazing bead saws right and left Handle drilling unit with 3 drills Automatic screwdriver Lock box milling machine Drill bits for corner trestles Good, ready-to-use condition.

Dimensions (L/W/H): 660x460x1200 mm Weight: 49 kg Total power requirement: 0,85 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: mm Width: mm Height: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single Head Corner Welding Machine

Rotox Water Slot Mill

Length: 5000 mm Width: 100 mm Height: 2800 mm Year: 2011 0 Range+Heine coating system for coating individual wooden window components and frames for sale on behalf of a client ----------------------------------------------------------- Manufacturer’s technical description: Part dimensions: Length: 5,000 mm Height: 2,800 mm Width: max. 100 mm Coating system: Intended use of material from the relevant coating manufacturer with a low solvent content (VOC value), water-based and non-flammable. Capacity: min. 40 crossbars/shift, i.e. approx. 60 window units/shift (without forced drying) Process (1 cycle is run twice): - Flooding - Drying - Checking and applying joint sealant - Spraying - Drying -------------- -------------------------- Item 1 Conveyor technology 1 Power + Free circular conveyor Layout as per drawing 11-138-010a Essentially comprising: 3 drives with gear motors for the main  ...

In need of repair - temperature controller defective! Single Head Welding Machine Technical data: heated blades, welding bead limitation 0.2 mm, optimisation of the welding result by means of parallel thrust welding processes, individual setting of the welding parameters, quick change of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/stroke, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, mains voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg.

Year: 2006 - technically efficient, ready to work – after full service - flash limit: 2 mm - angle range: 30-180 degrees - large heater - side supports - air preparation station

Technical data: heated blades, welding bead limitation 0.2 mm, optimisation of the welding result by means of parallel thrust welding processes, individual setting of the welding parameters, quick change of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/stroke, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, mains voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg.

Double mitre saw Haffner DGS 1873400 for PVC profile blanks Technical data: Built in 1994 Diameter of the saw blades mm 500 2 motors per Kw 2.2 - speed 2800 Cutting length max mm 3400 Cutting length min mm 230 Cutting depth approx. mm 150 Swivel range 45-90 degrees Hydropneumatic saw feed Pneumatic workpiece clamping Control panel with double buttons 2 suction nozzles diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Glazing bead saw: Sawing Units 1 Length of scanning rod 1,500 mm and 3,000 mm Cutting length max 90 mm Diameter saw blade 175 mm Cutting height 25 mm Support length 1,500 mm Main motor 0.5 kW Saw blades fixed 45° For plastics Pneumatic clamps Saw feed manual

Year: 2014 - technically efficient, ready to work – after full service - motor: 2 x 0.75 kW - pneumatic clamping of the strips - discs with undercutting cutters (2 x 250 mm, 2 x 150 mm) - glass simulator – lateral strip support – stepless (adjustable with a crank and counter) adjustment of the simulator position - manual height adjustment of the work table

Year: 2014 - technically efficient, ready to work – after full service - working dimensions: 2750 x 1300 mm - tilting stop pins - pneumatically tilted - sliding/brush strips

Year: 2006 - technically efficient, ready to work – after full service - screwdriver - automatic screw feeding system - tilting table top - fittings punch (straight cut)

Year: 2014 - technically efficient, ready to work – after full service - working dimensions: 2750 x 1300 mm - tilting stop pins - pneumatically tilted - sliding/brush strips

Window suspension conveyor Tiger Surface area on the ceiling approx. 8.50 m x 3.20 m 20 hooks with 2 points already dismantled and ready for loading Shipping Dimensions 1 pallet 2800 mm x 800 mm x H 500 mm Weight 119 kg 1 pallet 1200 mm x 800 mm x H 600 mm Weight 120.5 kg

Year: 2007 - technically efficient, ready to work - after full service - pneumatically operated rotary table -90°/0°/+90° - working range: 200 x 240 x 2500 mm - 4 kW motor - speed ​​control (inverter) - 2 electronic position indicators - pneumatic profile clamping - cooling and lubrication system - copying template

Year: 2002 New-exhibition machine, never used in production. - 3 motors - pneumatic profile clamping - adjustable milling length

Year: 1999 - technically efficient, ready to work – after full service - for the upper and lower hinge - centering the element - SPS control

Year: 2006 - technically efficient, ready to work – after full service - flash limit: 0.2 – 2 mm - maximum welding dimension: 3000 mm - support path - programmable PLC controller - automatic welding process

Year: 2002 New-exhibition machine, never used in production. - option to use up to 4 heads - top and bottom mortising - automatic operating cycle; easy adjustment of milling depth and height

Year: 2002 New-exhibition machine, never used in production. - flash limit: 0,8 – 2 mm - angle range 30-180 degrees - maximum welding height: 200 mm - maximum welding width: 215 mm (at 90°)

Used press / assembly machine for woodworking, suitable for assembling and pressing wooden windows, frames, skeletons, panels and glued wood parts. Suitable for joinery workshops and furniture or window production. Brand, exact model and technical specifications (press force, working dimensions, electrical connection, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-36

Lot 2205 – B&R PROVIT IPC 5000 industrial PC – Celeron 366 MHz – Windows NT – working Specifications: Brand: B&R Series: PROVIT IPC 5000 Type: Industrial PC / Machine Control System unit: 5C5601.11 System: Intel 82440BX Processor: Intel Celeron 366 MHz Processor socket: Socket 370 RAM: 64 MB SDRAM PC100 Hard disk: 6 GB Supply voltage: 115/230 V AC Mains frequency: 50/60 Hz Power supply: 150 W Operating System: Microsoft Windows NT Dimensions: approx. 270 x 200 x 100 mm Weight: approx. 4 kg CE marking available Features: VGA Graphics Connector Ethernet network connection RS232 serial connectors RS232/422 interface Parallel LPT interface PS/2 keyboard and mouse connection USB connection External VGA monitor connection Floppy interface PCI/ISA expansion options Internal fan cooling Various connection cables and connectors as shown Pa ...

Code: 0506 Brand: SAOMAD Model: UT 4 - CE Standard 4 Spindles tenoning machine for door and window frames, doors and windows - CE Standard Safety guards CE Standard Cutter heads lenght mm 100 Max distance between 2 heads mm 0/68 Horizontal displacement of upper head mm 30 Working table width mm 420 Table and square inclination +- 45 degrees Disk saw diameter mm 250 Diameter of counter profile disk max mm 300 Router shaft diameter mm 35 - Motor Hp 4 Cutter heads and disk saw motor Hp 3 Pneumatic workpiece clamping Heads suction mouth diameter mm 120 Router suction mouth diameter mm 120 Disk saw suction mouth diameter mm 120 Overall dimensions mm 1700 x 1150 x 1400 h Weight kg 500

Operation not tested Auction-ID: A1-40333-65

Without lattice box Auction-ID: A1-51211-142

Mixed lot of heavy-duty plumbing, pipe-working, lifting and general workshop equipment supplied with a large stackable steel storage container. Main equipment visible: Manual pipe threading die head with long operating handle Additional large manual threading/die stock with twin handles Large adjustable tap/die holder with long handles Additional long-handled threading/tool holder Assorted threading dies/cutters in small box Heavy-duty blue lifting/snatch block with large hook Hydraulic bottle jack, green/red Additional hydraulic bottle jack Heavy-duty pipe vice / pipe clamping stand Folding metal pipe/work support stand Bench-type screw vice/clamp Large pipe wrenches and open-ended spanners Various long operating bars, handles and extensions Assorted steel brackets, discs, fittings and miscellaneous workshop tools Auction-ID: A1-51282-56

Arntz Blue Line saw blade Length: 5800 mm Specification: 41 x 1.3 mm 2/3 K Carbide band saw blades with pre-cutting and post-cutting geometry for machining non-ferrous metals and graphite. The specialist for: - Aluminium alloys - Aluminium bronzes - Copper alloys - Sand-cast aluminium and magnesium castings - Graphite

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Complete wheel sets for the production and subsequent sharpening of HSS and carbide tools. Single diamond and CBN discs. for the manufacturing and Resharpening. Grinding wheel shots short and long run. Spacer discs for grinding wheel flanges.

Accessories fur WU 3 ms, apparatus of part of, round loop facility, etc. More info on request

Manufacturer: Homag, Type: Schnellwechselköpfe FK 11 / FK 13, FREE TEXT: Preis je Stck,

Manufacturer: Homag Nutsäge mit Winkelgetriebe, Type: 4-00570, Saw blade quantity: 1, Tool diameter mm: ca.160, Used: yes, Anschlussspindel mm: HSk 63, Available: sofort, FREE TEXT: HSK 63 ,

Post driven tools from a Traub CNC lathe VDI 40 As well as some measuring geraete for Traub Rest according to photos Special price

6 x 50/105, right, Ø13 mm 6 x 50/105, left, Ø13 mm 8 x 60/115, right, Ø13 mm 10 x 70/125, left, Ø13 mm

Technical data: -maximum working length 1250 mm -Stand round 1050 mm -Max pressing force 80 t -Stroke 250 mm -Stand RADIUS 300 mm -Max height betw. Table - press bar 560 mm -Lifting speeds -Backward speed idle max 100 mm / sec. -Forward speed 100 mm / sec. -Backward press speed max. 12 mm / sec. -Total power 15 kW -Space requirement approx. B 1750 x H 3400 X 2000 mm -Weight approx. 8500 kg -with: - CNC - control CYBELEC DNC 7400 PSGY -controlled X - axis back gauge 5-1000 mm -Pneum. Z - axis in three stages. height-adjustable -manually movable and foldable stop fingers -controlled pneumatic die shift - hydr. Tool clamping -Manual crowning - 2 piece support arms -Pointed tool shared H 320 x L 1000 mm -Foot tool H 320 mm x L 1000 mm - universal matrix L 1000 mm

Control cabinet for roller conveyor used from stock All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own ...

Manufacturer: Homag, Type: 4-00570, Tool diameter mm: ca.160, Used: yes, HSK 63: yes, Angle saw: yes, FREE TEXT: Aggregat ohne Hauben mit Tastschuh/ 9000 U/min,

Technical data: -Pressure capacity 2000 kN -Max working width 3100 mm -Stand round 3200 mm -Stand RADIUS 300 mm -Max mounted height 965 mm -Hub, or insertion depth Steplessly adjustable 0-400 mm -Plunger speed forward + reverse per 100 mm / sec -Operating speed in 9 steps selectable 1-10 mm / sec -Drive 400 V / 26.5 kW - space requirement approx. B H 4400 x 3500 X 2200 mm -Weight approx. 18500 kg -with: - CNC - control CYBELEC ModEva 15s BJ. 2007 -Back gauge with 4 controlled pneum. on the side and height-adjustable stop fingers -controlled bending AIDS in the velocity range -Hydr. -Pneum.. Clamp of the upper tool + substation witness -mot. Crowning / hydro cushion in the table -laterally movable support arms -E - foot switch -split pointed tool R 1-100 t / m, split die

Technical data: -Get well plate surface -Length approx. 2000 mm -Width approx. 1000 mm -Height approx. 1600 mm -Top plate thickness approx. 95 mm -Top plate with internal ribbing - 4 piece t grooves on the surface of the table length 2000 mm -Centre distance of the T-slot table top 230 mm each -Table side L 2000 mm with 12 holes M27 -T - slot width approx. 40 / 67 mm -T - groove depth approx. 35 / 60 mm -Space requirement L 2200 x T 1200 x H 1600 mm - weight approx. 4980 kg

6 x 50/105, right, Ø13 mm 17.40 eur 6 x 50/105, left, Ø13 mm 17.40 eur 8 x 60/115, right, Ø13 mm 17.40 eur 10 x 70/125, left, Ø13 mm 18.00 eur

HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM

2 pcs. molds with 1-1 cavity, automat with hot runnel control, PP material molds sizes both: 300x245x213 mm machine size min. 25 T

Manufacturer: Sägeaggregat, Type: für CNC, Werkzeugdurchmesser mm: 180, Bohrung mm: 30, Zustand: gut, HSK 63: yes, pm: 6000,

1 cavity from PP material mold sizes: 383x450x384 mm machine size min. 100 T

Used injection molding tools for the manufacture of plastic slippers. Offer total 43 pcs. refers to two cavities tooling and accessories. From small children (23) to men (45) in size, it is suitable for the manufacture of slippers of various types and colors. For sale total 12,900 Euro

Omschrijving Lengte mm Aantal Bovenmes H=66,5mm, R=0,8 85gr 835 2 Bovenmes H=66,5mm, R=0,8 85gr 415 2 Bovenmes H=66,5mm, R=0,8 85gr 300 1 Bovenmes H=66,5mm, R=0,8 85gr 150 1 Bovenmes H=66,5mm, R=0,8 85gr 50 1 Bovenmes H=66,5mm, R=0,8 85gr 40 1 Bovenmes H=66,5mm, R=0,8 85gr 20 1 Bovenmes H=66,5mm, R=0,8 85gr 15 2 Bovenmes H=66,5mm, R=0,8 85gr 10 1 Bovenmes H=66,5mm, R=0,8 85gr LEFT 100 1 Bovenmes H=66,5mm, R=0,8 85gr RIGHT 100 1 Ondermatrijs V10, R=0,8, 85gr 835 2 Ondermatrijs V10, R=0,8, 85gr 415 2 Ondermatrijs V10, R=0,8, 85gr 300 1 Ondermatrijs V10, R=0,8, 85gr 150 1 Ondermatrijs V10, R=0,8, 85gr 50 1 Ondermatrijs V10, R=0,8, 85gr 40 1 Ondermatrijs V10, R=0,8, 85gr 20 1 Ondermatrijs V10, R=0,8, 85gr 15 2 Ondermatrijs V10, R=0,8, 85gr 10 1 Totaal 26 Price € 2250,-- New prijs € 3250,--

Travel x 350 mm y 250 mm z 220 mm Water bath machine Automatic wire threading Glass scales x / y incl. box for large coils incl. cooler incl. functional guarantee