138,455 used machines on RESALE, but how to find them? Machine Search
Key data: 1770 A, 1220 , 70
The OPS INGERSOLL EDM machine GANTRY 1200 HSJ / 64 bit, built in 2006, has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts have been carefully checked. The following overhaul work was carried out on the above-mentioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axis. Replacement of all (4) ball screws of the tank drive. Inspection and test of the C-axis for tightness and accuracy Geometric verification of all axes according to OPS INGERSOLL protocol. Basic cleaning of the complete machine base. Cleaning of the complete working tank including replacement of the felt scrapers. Complete painting of the machine. Overhaul of the dielectric pumps. Replacemen ...
This CAMFIL Quantum Series 2 was manufactured in 2020. It features a robust steel construction, designed for continuous industrial use with a motor power of 4 kW and airflow of approximately 2,000 m³/h. Ideal for metalworking processes, it includes an energy-saving fan and a maintenance-friendly design with easily accessible filter elements. Consider the opportunity to buy this CAMFIL Quantum Series 2. Contact us for more information about this machine.
Key data: 750 mm, 650 mm, 60 A
Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition. ...
Consisting of: 3x impact wrench 2x sander 2x drill Auction-ID: A1-44050-343
This EUBAMA S6 rotary transfer was manufactured in 2006. It features a robust base frame, hydraulic fittings, a Stöber servo motor with planetary gearbox, and a milling unit with NC feed. Ideal for precision, it also includes a face turning head and a length control system with a pneumatic cylinder and laser. Contact us for more information about this machine.
length: 560 mm width: 730 mm height: 1150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This WIPOTEC SC 30 was manufactured in 2023. It features a high-speed operation with a capacity of up to 240 pieces per minute and a scan width of 320 mm. The system includes stainless steel construction, intuitive touchscreen controls, and an industrial high-performance X-ray unit for precise foreign object detection. Ideal for efficient and accurate sorting operations. Contact us for more information about this machine.
This HAAS TR160 with Sigma 5 was manufactured in 2016. It features a 2-axis table and is equipped with a Sigma 5 servo motor, ensuring precise and efficient operation. Ideal for those looking to enhance their machining capabilities. Contact us for more information.
This 3-axis LORENZ LS 150 was manufactured in 2015. It features a connected load of 60KVA, a rated current of 50A, and operates on a 400V system. Weighing 7000kg, this machine has been modernized to enhance performance. If you are looking to get high-quality milling capabilities, consider the LORENZ LS 150 machine we have for sale. Contact us for more information.
Amada HFE 80-25 Year: 11/ 1999 Working length: 2550 mm Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 mot. adjustable back gauge Stroke: 200 mm Projection: 420 mm Crowning Working height: 960 mm Engine power: 9 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons
Package Tool Holder VDI 30 Make: EWS Drill rod holder D= 8, 10, 12, 16, 20, 25, 32, 40mm Collet Holder ER 16, ER 25, ER 32 Turning steel holder outside left and right There are about 250 pieces available Also to be handed in individually Other images such as VDI 40, SK 40, HSK 63 and images on request
x-travel: 700 mm y-travel: 350 mm z-travel: 450 mm table surface area: 940 x 510 mm spindle taper: SK 40 spindle turning speed range: 32 - 1600 U/min feed - longitudinal/cross: 8 - 400 mm/min feeds vertical: 4 - 200 mm/min total power requirement: 4,5 kW weight of the machine ca.: t dimensions of machine L x W x H: 1,85 x 1,62 x 1,83 m Accessories: vertical head with quill retraction, univ. table, counter bearing, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X/Y/Z: 600mm/400mm/420mm, feed rate X/Y/Z: 6m/min, rapid traverse: 6m/min, spindle power: 8kW, speed: 4500rpm, quill stroke: 75mm, table dimensions X/Y: 900mm/450mm. Machine dimensions X/Y/Z: approx. 2800mm/2200mm/2100mm, weight: approx. 2800kg, control: Heidenhain 415B, hours: approx. 56193h. Includes cooling lubricant system and 3D measuring probe. The brake of the Z axis is to be replaced. Documentation available. An on-site inspection is possible.
Wire EDM machine Fanuc alpha IB BJ 2002
including: deep hole drilling, Auction-ID: A1-44050-268
: 560 mm : 320 mm : 400 mm : 950x450 mm : 1050x320 mm : 25-3600 U/min : SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
measuring range X-axis: 330 mm measuring range Z-axis: 400 mm 1 tool presetter Make: KELCH, type: Kalimat C34, year 2002 Measuring range X/Z 330 x 400 mm Easy-Wrap Set measuring software 2 adapters VDI / HSK, tool table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Without pallet box; Auction-ID: A1-44050-114
Tool cabinet with contents see pictures Auction-ID: A7-50523-915
Various insert drills, milling and thread tapping. Auction-ID: A1-49889-27
A used manual tool grinding machine from Saacke is offered. Table size X/Y approx.: 850mm/145mm, travels X/Y/Z approx.: 450mm/250mm/250mm, center height approx.: 125mm, max. grinding length approx.: 500mm, machine dimensions X/Y/Z approx.: 1500mm/1100mm/1500mm, weight approx.: 850kg. Inspection by appointment possible.
x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 4,4 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 222,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool diameter: 18 mm adjustability of the setting guage: 130 mm max. dia. of grinding wheel: 100 mm weight of the machine ca.: 0.15 t dimensions of the machine ca.: 0.55 x 0.4 x 1.11 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 710 mm y-travel: 600 mm z-travel: 500 mm NC-rotary table: 630 mm spindle taper: SK 40 spindle turning speed range: 18 - 6300 U/min control: DIALOG 4 feed: 2 - 3600 mm/min rapid traverse: 6 m/min table load: max. 485 kg quill stroke: 80 mm spindle drive: 9,5 kW total power requirement: 20 kVA weight of the machine ca.: 4,6 t dimensions: 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Various types, as well as 1x drill chuck mk3; various collets. Auction-ID: A1-49889-29
Horizontal transfer machine manufactured in 2012. This PFIFFNER HW 25-12 features a 12-station indexing rotary table and can accommodate up to 18 machining units. With a maximum clamping diameter of Ø 25 mm and a workpiece length of 100 mm, it offers versatile capabilities. Consider the opportunity to buy this PFIFFNER HW 25-12 machine. Contact us for further details.
x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
including 1 face mill, sk-50 mount, fixed centers Auction-ID: A1-44050-262
This 5-axis DMG ULTRASONIC 10/ DENTAL 10 was manufactured in 2010, featuring a universal machining center with X/Y/Z travels of 120/120/200 mm. It includes a rotating CNC table, work spindle with HSK-E 32 attachment, and a maximum rotation speed of 40,000 rpm. The machine also boasts an automatic tool changer with 16 stations and Siemens 840D control system. If you are looking to get high-quality milling capabilities, consider the DMG ULTRASONIC 10/ DENTAL 10 machine we have for sale. Contact us for more information.
maximum number of results exceeded
please refine your search
150 € 
