tool room milling used for sale

A Maho CNC universal milling machine is available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: SK40, table diameter: 630mm, speed: 3150rpm, feed rate: 4m/min, rapid traverse: 6m/min, machine dimensions X/Y/Z: approx. 3000mm/2800mm/2200mm, weight: approx. 3500kg, control system: Philips CNC 432. An on-site inspection is possible.

A Maho CNC universal tool milling machine is available. Travel X/Y/Z: 600mm/400mm/450mm, table dimensions X/Y: 900mm/450mm, max. table load: 400kg, tool holder: SK40, speed: 4000rpm, feed rate: 4m/min, rapid traverse: 5m/min, tool stations: 20, milling head swivel range: +/-90°. Machine dimensions X/Y/Z: approx. 2450mm/3200mm/1900mm, weight: approx. 3200kg, control: Maho CNC 432, operating hours: 62908h. An on-site inspection is possible.

x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm tool taper: SK40 Speed: 40-2000 U/min. control: Aktiv HEIDENHAIN table-size: 600 x 210 mm total power requirement: 2 kW weight of the machine ca.: 0,73 t dimensions of the machine ca.: TBH 1,20x1,10x1,60 m Comes from a vocational school - Powered feed in X, Y, and Z axes - Coolant system - Machine vice - Work light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a classic universal tool milling machine Deckel FP4A with Dialog 11 control. The machine comes from a company closure and was reliably in use until the end. The machine was stored and was not energized for a long time. Due to the downtime, the buffer batteries of the control system will probably have to be replaced and the machine parameters reset. Manufacturer: Lid Model: FP4A Control: Dialog 11 Tool holder: SK40 Working range approx.: X: 400mm / Y: 300mm / Z: 400mm The machine is at ground level and dry. The transport must be taken care of by the buyer himself. An indoor crane, pallet truck, forklift, etc. are available on site for loading. The machine can be viewed by appointment. To make an appointment, call 0171 216 414 3 from Mon. - Fri. 9:00 a.m. to 5:00 p.m.

A CNC high-speed machining center OPS Ingersoll in gantry design is available. Materials: graphite/copper/aluminum/plastics/hard machining, travel X/Y/Z: 700mm/550mm/450mm, table dimensions X/Y: 850mm/700mm, max. workpiece weight: 2000kg, tool holder to table distance range: 20mm-520mm, tool holder: HSK-E40, spindle: Fischer mW 9/10-4, speed: 42000rpm, spindle power: 17kW, spindle runout accuracy: µm, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3200mm/2500mm/2700mm, weight: approx. 9000kg, control: Andronic 2060. Documentation available. An on-site inspection is possible.

x-travel: 400 mm y-travel: 375 mm z-travel: 250 mm Control: CNC 432 total power requirement: 7 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 3 x 3 x 2 m Nr. 3666 Universal tool milling machine MAHO MH 400 C - in need of repair - unclear defect - Arbeitsbereich: 400 x 375 x 250 Steuerung: Philipps CNC 432 - Bahnsteuerung Spindle SK 40 Speed range 80 - 4000 rpm Dimensions: 2.20 x 1.60 x 1.70 m Weight approx. 1500 kg The machine comes from a trade-in, Screen appears, control cannot be switched on Unknown defects Machine is sold as a spare parts carrier / hobbyist machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm total power requirement: 3 kW weight of the machine ca.: 2,,2 t dimensions of the machine ca.: 2,522 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mm y-travel: 500 mm z-travel: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,22,22,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 870 mm y-travel: 370 mm z-travel: 400 mm table-size: 310 x 1370 mm distance vertical spindle / table: 50 - 450 mm feed - longitudinal/cross: 20 - 800 mm/min : 9 - 355 mm/min rapid traverse longitudinal and cross: 3000 / 1375 mm/min spindle taper: SK 50 spindle turning speed range: 40 - 1750 U/min spindle speed:: 12 Stück Control: total power requirement: 5,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,9 x 2,0 x 1,5 m - Powerful CNC universal milling machine - Includes Fanuc control system - Kneading milling head - Automatic feeds on X/Z/Y axes - Central lubrication system - Coolant system - Pivoting machine light - Splash guard tray - Separate transformer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: 50 mm driven tools: 5 Stück : 4 Stück : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Heidenhain 355 x-travel: 850 mm y-travel: 550 mm z-travel: 450 mm tool taper: SK50 hydraulic vise: documentation: weight of the machine ca.: 5,5 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm digital readout: 3 Achsen HEIDENHAIN spindle taper ISO: 40 DIN 69871A spindle turning speed range: 50 - 4000 U/min table-size: 800 x 400 mm table load: 400 kg feeds -stepless-: max. 2000 mm/min rapid traverse: 5 / 4 m/min power capacity - milling spindle: (S1) 10,5 kW quill stroke: 80 mm coolant: voltage: 400 V total power requirement: 17,5 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2,00 x 2,76 x 2,05 m - Serial-No.: 90395 - Digital display HEIDENHAIN ND780 - electr. handwheel - mechanical handwheels - stepless speed control - stepless feed drives - horizontal milling spindle - coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 40 - 2.000 U/min table-size: 750 x 320 mm feeds -stepless-: 10 - 380 mm/min rapid traverse: 1.200 mm/min power capacity: 2,2 kW quill stroke: 80 mm coolant: voltage: 400 V total power requirement: 4,7 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,15 x 1,40 x 1,85 m - Serial-No.: 148373 - 3-axis digital display - Horizontal milling device - Milling head swivels ±45° - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm control: TNC 320 HEIDENHAIN spindle taper ISO: 40 spindle turning speed range: 50 - 4.000 U/min table-size: 800 x 400 mm table load: 400 kg feeds -stepless-: 0 - 8000 mm/min rapid traverse: 8,0 m/min power capacity: 6,0 kW quill stroke: 80 mm coolant: voltage: 400 V total power requirement: 17,0 kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 1,90 x 2,70 x 2,05 m - Fabr.No.: 90288 - Control: TNC --- - electrical hand wheel - Horizontal milling spindle - Coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref.nr. 00937 Name of the tool milling machine Manufacturer: Hermle Model UWF 800 HS 57 Year of manufacture 1995 general overhauled (Investment of approx. 41,158 euros) Condition Functional Remark: Non-functional digital display of the setting values. The setting values can be read mechanically on the screw wheels. Accessory box: With clamping sets, shaft extensions, mounts, etc. The digital display for the setting parameters does not work. The machine can otherwise be used in full working order, the setting parameters can be read manually on the adjustment wheels. Extensive accessories including mounts, shaft extensions, etc. are attached according to photo. Customer writes: System is fully functional, except that the digital setting display no longer works. But all settings can be read analogously on the machine. Deadline CW 43/2026 [Oct. 19-23, 2 ...

Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 50 A Control: PHILIPS Tool holder: SK 40 Table dimensions: 550 x 280 m with 4 grooves and a vise attached, jaw width: 125 mm Travel X-axis: approx. 800 mm Travel Y-axis: approx. 400 mm Travel Z-axis: approx. 300 mm incl. documentation Reference: Süßen - Lot 12 Auction-ID: A7-49056-260

A universal precision drilling and milling machine by Optimum is available. Speed: 1750rpm, spindle sleeve travel: 120mm, milling head swivel: +/-45°, vertical reach range: 24mm-650mm, horizontal reach range: 0mm-185mm, spindle-to-cross table distance: 60mm-390mm, drilling capacity in steel: 30mm, max. face mill diameter: 100mm, max. end mill diameter: 25mm, cross table dimensions X/Y: 1000mm/240mm, max. table load: 160kg, travel X/Y/Z: 580mm/200mm/340mm, X-axis feed: 720mm/min, machine dimensions X/Y/Z: approx. 1300mm/1100mm/2200mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible.

: gebraucht : 2004 : 4540 : ca. 2 Wochen ab Auftragse : Österreich : 19900 € : 1 : 63 - 3150 (18) U/min : 700 x 500 x 500 mm : 900 x 500 mm : 6.6 kW : 2150 mm : 2220 mm : 2120 mm : 2550 kg : 500 kg : 100 mm CNCHeidenhain TNC 410 18. mech. feeds with rapid travel in X,Y,Z axes ball screw spindles toolmaker accuracyDIN 8615 hyd. tool clamping with holdersSK40 vertical und horizontal vertical spindle+/- 30° swiveling swing out device digital 3D edge finder work area protection coolant equiptment aut. central lubrication fixed angle table with 10 t-slots chip collecting tray machine lamp users manual in GERMAN + CE COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 450 mm z-travel: 500 mm Control: CNC 332 / TNC 355 total power requirement: 5,5 kW weight of the machine ca.: 4 t dimensions of the machine ca.: ca. 3 x 3 x 2,5 m No. 2213 Universal tool milling machine MAHO MH 800 T Working area: 800 x 450 x 500 (800 longitudinal / 450 vertical / 500 transverse) Drive: 5.5 kW Control: Heidenhain CNC 332 / TNC 355 Universal built-in rotary table Coolant device Chip tray Splash guard half cabin, tool clamp Technical documentation Tool holder ISO 40, Table clamping surface 600 x 900 m, max. table load 500 kg, quill stroke 80 mm Speed range 63 - 3150 rpm Feed rate 1 - 1500 mm/min Rapid traverse: 4.5 m/min Weight: approx. 4 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mm y-travel: 400 mm z-travel: 370 mm Control: Retrofit Dialog 11 - 7.07 table surface area: 1400 555 mm total power requirement: 5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 332,2 m Packing: 3 m Retrofit by FPS Alternate NC - Rotary Table available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 315 mm y-travel: 180 mm z-travel: 320 mm taper in main spindle: ISO 40 table surface area: 600 x 250 mm T-slots: 5 Stk. turning speeds: 45.0 - 1950 U/min feed stepless: 10 - 170 mm/min voltage: 400 V total power requirement: 5.1 kW weight of the machine ca.: 1300 kg range L-W-H: 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained () Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot clamping table - Axis feed with rapid traverse in Y-axis Rapid traverse continuously adjustable - Manual axis adjustment in Z+X axis - Control cabinet, installed on the left - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: iTNC 530 Heidenhain turning speed range - milling: 20 ~ 12.000 U/min power capacity - milling spindle: 35 / 25 kW tool taper: SK 40 tool piece magazine with: 100 pos. table surface area: 2.600 x 600 mm rapid traverse X-axis: 100 m/min rapid traverse Y-axis: 50 m/min rapid traverse Z-axis: 50 m/min max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg max. table load: 2.200 kg total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 7,0 x 4,2 x 2,7 m Chip conveyor: Coolantsystem: interface 4. axis: 4. axis: 560 mm Seperating wall: oil mist extraction: Tailstock: 350 mm / MK 5 elektr. hand wheel: through spindle coolant: 40 bar Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - in ...

pressure: 6 bar table diameter: / mm table load: / t Pneumatic drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mm y-travel: 270 mm z-travel: 355 mm tool taper: ISO 50 speeds of spindle (left/right): 25-1400 total power requirement: 3,8 kW weight of the machine ca.: 2 t dimensions of the machine ca.: m X-axis travel: 850 mm Y-axis travel: 270 mm Z-axis travel: 355 mm Tool holder: ISO 50 Spindle speed (clockwise / counter-clockwise, infinitely variable): 25 – 1,400 rpm Total power requirement: 3.8 kW Machine weight: approx. 2 t Infinitely variable feed rates on all axes (X, Y and Z) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain TNC 113 total power requirement: 4 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 222 m No. 5152 Universal tool milling machine Deckel FP 4 M (K) - 2203 Working area: 500 x 400 x 400 Drive: 4 kW Spindle holder SK 40 / DIN-2080 Speed range 50 - 2,500 min-1 Feed rates 8-630 mm/min stepless Rapid traverse 1.3 m/min Fixed table 800 x 460 mm Chip tray Heidenhain TNC 113 Active Digital readout Space requirement approx. 2 x 2 x 2m Weight approx. 1,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Contour 3 / Dialog 4 total power requirement: 5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 5268: Universal tool milling machine Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Working area: 300 x 300 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 400 mm z-travel: 500 mm Control: LINUX CNC total power requirement: 9 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 x 3 x 2,7 m 2025 RETROFIT mit LINUX CNC - PC Steuerung Fixed table Full protection cabin Electronic handwheel Documentation Spindle holder SK 40 / DIN 2080 Speed range up to 6300 min-1 Rapid traverse 10 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 300 mm z-travel: 350 mm total power requirement: 3 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 222 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Contour - 3 / Dialog 4 total power requirement: 5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 5267: Universal tool milling machines Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Working area: 300 x 300 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mm y-travel: 500 mm z-travel: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,2 m No. 4614 Mikron WF 31 SA Universal tool milling machine Working area: 560 x 500 x 400 Control: Heidenhain TNC 114 - active digital display Rigid angular table Spindle holder SK 40 Coolant device Speed range 40 - 4000 rpm Weight approx. 2450 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Dialog / Contour 3 total power requirement: 4 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 232 m Package price: 3 x DECKEL FP 2 EXW free lorry Stock no: 5267 FP 2 A Contour 3 5268 FP 2 A Contour 3 5290 FP 2 NC Dialogue 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 4 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 222 m No. 5124 Universal tool milling machine DECKEL FP 4M Working area: 500 x 400 x 400 Drive: 4 kW Control: 3-axis digital display Heidenhain Spindle holder SK 40 / M16 Speed range 50-2500 min-1 Feed rates 8-630 mm/min Rapid traverse 1.3 m/min Fixed table 800 x 460 mm Chip tray documentation Space requirement approx. 2 x 2 x 2 m Weight approx. 1500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 4 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 222 m 1 x UWF 700 Digi 3 x UWF 801 TNC 135 + 124 1 x UWF 802 M From stock liquidation, partly not functional / in need of repair Price VHS / against bid The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mm y-travel: 500 mm z-travel: 400 mm control: Heidenhain TNC 114 Aktiv turning speed range: 40 - 4000 U/min spindle drive, 2-steps: 3,3 / 4 kW total power requirement: 9 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,3 x 2,3 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 500 mm z-travel: 500 mm Control: CNC 432 total power requirement: 10 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3 x 3 x 2,6 m No. 0052 Universal tool milling machine MAHO MH 700 C Working area: 700 x 500 x 450 Drive: 10 kW Control: Philips CNC-432 Fixed table Fully protected cabin with 3 sliding doors Tool holder: ISO-40. Speeds: 20-3150 min-1 Feed rate: 1-3000 mm/min, rapid traverse 6 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 11 total power requirement: 7,5 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4 x 3,5 x 2,5 m No. 4430 Universal tool milling machine Working area: 710 x 600 x 455 mm Drive: 7.5 Control: Dialog-11 control Spindle holder SK 40 Speed range up to 6,300 Fixed table Cabin Coolant container Space requirement see data sheet Weight approx. 5 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm total power requirement: 2 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,5 x 2 x 2 m Nr. 3287 Universal tool milling machine DECKEL FP 1 Working area: 300 x 160 x 340 Control: Active digital display Drive: 1.5 kW Speed range 2000 rpm Tool holder SK-40 Rigid angled table 210 x 600 mm Documentation Optional / available on request: - Universal table - counter holder - Rotary table Ø 380mm - Dividing head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 410 mm y-travel: 310 mm z-travel: 400 mm total power requirement: 2,2 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 222 m Universal tool milling machine HERMLE UWF 700 Spindle holder SK 40 Speed range 40-2000 min Space requirement approx. 2 x 2 x 2 m Weight approx. 1100 kg For further data see attached PDF Rigid table 700 x 285 Horizontal milling machine vertical - milling head enclosed - partially rep. conditioned Documentation Working area: approx. 410 x 310 x 400 Drive: 2,2 Heidenhain digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm total power requirement: 2 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,5 x 2 x 2 m No. 3934 Universal tool milling machine DECKEL FP 1 Working area: 300 x 160 x 340 Control: Active digital display Drive: 1.5 Tool holder SK 40 Speed range 2000 rpm Rigid table Documentation On request / optionally available: -Universal table / fixed table - Hydraulic machine vice - Tool cabinet - Rotary table Ø 380 mm -Cutting attachment -Collets and arbors The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 220 mm z-travel: 400 mm Control: Dialog 2 total power requirement: 1,6 / 2 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,2 m No. 5290 Universal tool milling machine DECKEL FP 2 NC / 2801 Working area: 300 x 220 x 400 Drive: 1.6/2 kW Control: Dialog 2 contouring control Fixed table with chip tray Spindle SK 40 Speed range up to 3150 min-1 Quill stroke 65 + 60 mm Space requirement c.3 x 3.5 m Transport dimensions approx. 2 loading meters Weight approx. 1300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 300 mm z-travel: 400 mm total power requirement: 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 222 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm total power requirement: 3 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,52,52 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 350 mm z-travel: 375 mm digital readout: AKTIV - Digitalanzeige turning speed range: 63 - 4000 U/min spindle taper ISO: 40 table surface area: 800 360 mm total power requirement: 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2 2 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 315 mm y-travel: 180 mm z-travel: 320 mm taper in main spindle: ISO 40 table surface area: 600 x 250 mm T-slots: 5 Stk. turning speeds: 45.0 - 1950 U/min feed stepless: 10 - 170 mm/min voltage: 400 V total power requirement: 5.1 kW weight of the machine ca.: 1300 kg range L-W-H: 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained () Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot clamping table - Axis feed with rapid traverse in X+Z+Y axis Rapid traverse continuously adjustable - Swiveling machine light - Control cabinet, installed on the left - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 4546 : prompt, Zwischenverkauf v : Taiwan : 32800 € : 1 : 65 - 2600 U/min : ISO 40 : 420 x 220 x 380 mm : 840 x 390 mm : 2.2 kW : 1600 mm : 1700 mm : 2000 mm : 1145 kg : 840 x 390 mm : 1000 mm/min : 5 : 14 x 63 mm : 200 kg : 420 mm : 220 mm : 380 mm : 0 - 600 mm/min. : 0 - 600 mm/min. : 65 - 2600 : 90 - 310 mm : 65 - 2600 : +/- 90° ° : 100 mm : manuell : 2,2 kW : 950 x 250 mm : 90 - 310 mm : 100 - 480 mm demo machine / mint condition net price (price for new machine € 41.800,00) swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle pro ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 48800 € : 932.08 € : 40 -3200 U/min : ISO 40 : 600 x 500 x 400 mm : 1000 x 500 mm : 3.75 kW : 1814 kg : 1000 mm/min : 8 : 14 x 63 mm : 300 kg : 600 mm : 500 mm : 400 mm : 0 - 600 mm/min. : 0 - 600 mm/min. : 40 - 3200 : 40 - 3200 : +/- 90° ° : 100 mm : manuell : 3,75 kW : 1200 x 250 mm : 160 - 660 mm : 95 - 495 (2. T-Nut), 180 mm swiveling operating panel 3 axes digital read out Fagor 400ib Innova motor for horizontal- and vertical spindle: 3,75 kW feed motors with inverter for X/Y/Z: 0,75 / 0,75 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp autom ...

Object Extensive range of milling tools, tool holders and accessories for metalworking. Contents - Numerous disc, shape and profile milling cutters - Various milling heads and milling tools - Tool holders and milling mandrels - Collets and chucks - Drilling and shank tools - Adapters, sleeves and other mounts - Various fixture and machine parts - Other cutting accessories Remarks Extensive used tool inventory from metalworking. In some cases, clear signs of use and storage customary in operation. Scope of delivery according to pictures. Auction-ID: A7-49302-179

Offered for sale is an Optimum toolroom milling machine. Drilling capacity in steel: 30mm, continuous drilling capacity in steel: 25mm, spindle taper: ISO40, quill travel: 120mm, milling head swivel range: +/-45°, cross table X/Y: 1000mm/240mm, max. cross table load: 160kg, X/Y/Z travel: 580mm/200mm/340mm, X-axis table feed: 720mm/min. Including accessories. The tray has been cut open on the right-hand side so that longer workpieces can also be machined. Dimensions X/Y/Z: approx. 2270mm/1500mm/2100mm, weight: approx. 900kg. An on-site inspection is possible.

MAHO MH 800 P - Tool Milling Machine - Recording: ISO40 - X/Y/Z: 700 / 450 / 500 mm - Occasionally problems with the measuring system due to contamination - Occasional failures during rapid traverse - in this case the machine must be switched off and on - Year of construction 1980 Technical data Main Gear: - Sliding gear geometrically stepped: 1.25 - Number of gears: 18 Horizontal & vertical milling spindle: - Speed range: 40 - 2000 rpm - Tool holder: ISO 40 - Tool clamping: hydromechanical - Quill stroke vertical/horizontal: 100 mm Quill feed gear (vertical): - Autom. Quill feeds: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Workspace (manual & automatic): - Longitudinal adjustment (X-axis): 700 mm - Vertical adjustment (Y-axis): 450 mm - Headstock (Z-axis): 500 mm Feeds: - Infinitely variable in X/Z: 10 - 500 mm/min - Infinitely variable in Y: 5 - 250 mm/m ...

Table size: 400 x 800 mm Travel x/y/z: 620/420/400 mm Quill Hub: Spindle holder: SK 40 Vertical milling head can be swivelled in 2 planes Spindle speeds: 63 - 3150 rpm electr. Connection: 400 V Space requirement: 1800 x 1700 x 1900 mm Weight approx.: 1.9 t