137,138 used machines on RESALE, but how to find them? Machine Search
Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece
Tool cabinet for bending tools suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allows the two-sided access to the tools -any adjustment of the inserting -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Tray width usable 130mm - Depth usable 980mm - Number of intermediate boeden: 3 stueck
Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece
Standard performance connection to 380 V, 50 Hz, 3-phase. Equipment: 2 grinding spindles zubehoer ample tool weight:600 kg Flue requirements:1.5x2.6 m -cooling agent device with electric pump
Technical data: -maximum working length 1250 mm -Stand round 1050 mm -Max pressing force 80 t -Stroke 250 mm -Stand RADIUS 300 mm -Max height betw. Table - press bar 560 mm -Lifting speeds -Backward speed idle max 100 mm / sec. -Forward speed 100 mm / sec. -Backward press speed max. 12 mm / sec. -Total power 15 kW -Space requirement approx. B 1750 x H 3400 X 2000 mm -Weight approx. 8500 kg -with: - CNC - control CYBELEC DNC 7400 PSGY -controlled X - axis back gauge 5-1000 mm -Pneum. Z - axis in three stages. height-adjustable -manually movable and foldable stop fingers -controlled pneumatic die shift - hydr. Tool clamping -Manual crowning - 2 piece support arms -Pointed tool shared H 320 x L 1000 mm -Foot tool H 320 mm x L 1000 mm - universal matrix L 1000 mm
Technical data: -Pressure capacity 2000 kN -Max working width 3100 mm -Stand round 3200 mm -Stand RADIUS 300 mm -Max mounted height 965 mm -Hub, or insertion depth Steplessly adjustable 0-400 mm -Plunger speed forward + reverse per 100 mm / sec -Operating speed in 9 steps selectable 1-10 mm / sec -Drive 400 V / 26.5 kW - space requirement approx. B H 4400 x 3500 X 2200 mm -Weight approx. 18500 kg -with: - CNC - control CYBELEC ModEva 15s BJ. 2007 -Back gauge with 4 controlled pneum. on the side and height-adjustable stop fingers -controlled bending AIDS in the velocity range -Hydr. -Pneum.. Clamp of the upper tool + substation witness -mot. Crowning / hydro cushion in the table -laterally movable support arms -E - foot switch -split pointed tool R 1-100 t / m, split die
6 x 50/105, right, Ø13 mm 17.40 eur 6 x 50/105, left, Ø13 mm 17.40 eur 8 x 60/115, right, Ø13 mm 17.40 eur 10 x 70/125, left, Ø13 mm 18.00 eur
Convolute (excerpt) from different tools - see picture
Technical data: -Get well plate surface -Length approx. 2000 mm -Width approx. 1000 mm -Height approx. 1600 mm -Top plate thickness approx. 95 mm -Top plate with internal ribbing - 4 piece t grooves on the surface of the table length 2000 mm -Centre distance of the T-slot table top 230 mm each -Table side L 2000 mm with 12 holes M27 -T - slot width approx. 40 / 67 mm -T - groove depth approx. 35 / 60 mm -Space requirement L 2200 x T 1200 x H 1600 mm - weight approx. 4980 kg
HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM
! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=2140 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Weight: approx. 517 kg Fully assembled as a set included 6 Tool Holders WKH 210 6 Tool Holders WKH 211 5 Tool Holders WKH 212 5 Tool Holders WKH 213 4 Tool Holders WKH 214 4 Tool Holders WKH 215 Dimensions: 1,040 w x 2,140 h x 1,050 t Curb weight: 517 kg Structure powder-coated in Gentian blue RAL 5010 (body) and Off-white RAL 9002 (excerpts)
2 pcs. molds with 1-1 cavity, automat with hot runnel control, PP material molds sizes both: 300x245x213 mm machine size min. 25 T
1 cavity from PP material mold sizes: 383x450x384 mm machine size min. 100 T
Used injection molding tools for the manufacture of plastic slippers. Offer total 43 pcs. refers to two cavities tooling and accessories. From small children (23) to men (45) in size, it is suitable for the manufacture of slippers of various types and colors. For sale total 12,900 Euro
Travel x 350 mm y 250 mm z 220 mm Water bath machine Automatic wire threading Glass scales x / y incl. box for large coils incl. cooler incl. functional guarantee
Zoller tool pre-setr with change adapter for index GE / GB / ER / machines as well as Gildemeister GM / Schuette lathes partly universally applicable (VDI etc) - with Heidenhein measuring device - various base holders - Measuring table Etc.
Alu window profiles Punching tool for end hole ventilation 4 stations
Key data: 500 , 350 , 300
Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler
This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: Premus Precitool Type: Preciset 420 Measuring range X: 420 mm Measuring range Z: 420 mm Pressure: 6-8 bar Frequency: 50/60 Hz Power: 600 VA Voltage: 100-120 V~ / 200-240 V~ Weight: ~120 kg Accessories: Data clips incl. coding section zidCode Scanner All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".
Machine number: 20932 Operating voltage: 3 x 400 VAC Frequency: 50/60 Hz. Rated Current: 46A 63A Control voltage: 200-240 VAC Power: 28 kW Control: Tool holder: Grinding head: Grinding spindle: Spindle can be swivelled by motor Drive power: 7.5 kW Speed: 0 – 9000 rpm Lens mount: Disc diameter: Max. number of slices: Travel: X: 380 mm Y: 280 mm Z: 280 mm Feed: X and Y axis: 20000 mm/min Z-axis: 10000 mm/min Swivel axes: Designation: C-axis Swivel angle: 340° Feed: max. 66°/s Axis: A-axis: Rotation endless Feed: max. 167°/s Incl. oil cooling and cooling system from the manufacturer ARO Incl. various matching machine accessories such as tool holders, coolant lines and other clamping devices
Wire EDM machine SODICK A 600 manufactured in 1997. Technical parameters of the SODICK A 600 EDM machine: - table travel (X axis): 600 mm - table travel (Y axis): 400 mm - Z axis travel: 270 mm - maximum dimensions of the processed part (width x depth x height): 800 x 550 x 260 mm - maximum weight of the workpiece: 900 - auxiliary table travel (U axis x V axis): 70 x 70 mm - wire diameter: 0.1 ~ 0.3 mm - maximum wire speed: 250 mm / sec. - wire tension: 0.2 ~ 2.8 kgf - cutting inclination at an angle: + -15 degrees per 100 mm of thickness - height from the floor to the surface of the working table: 1000 mm - machine tool dimensions (width x depth x height): 2188 x 2645 x 2100 mm - machine tool weight: 3700 kg
Rapid Original TRM 350 Quick Release Holder type TRM350 Indexing 0.005 With 7 alternating necks 4 Pcs 201/350 34mm 1 St 202/350 Prima 32mm 2 Pcs 216/350 Diameter 50mm
SK40 DIN 69871 Oil Feeder met Holder Weldon 40mm A= 65mm For internal cooling for rails without internal cooling through the spindle
SK40 DIN 69871 Oil Feeder Weldon 32mm
Omschrijving Lengte mm Aantal Bovenmes H=66,5mm, R=0,8 85gr 835 2 Bovenmes H=66,5mm, R=0,8 85gr 415 2 Bovenmes H=66,5mm, R=0,8 85gr 300 1 Bovenmes H=66,5mm, R=0,8 85gr 150 1 Bovenmes H=66,5mm, R=0,8 85gr 50 1 Bovenmes H=66,5mm, R=0,8 85gr 40 1 Bovenmes H=66,5mm, R=0,8 85gr 20 1 Bovenmes H=66,5mm, R=0,8 85gr 15 2 Bovenmes H=66,5mm, R=0,8 85gr 10 1 Bovenmes H=66,5mm, R=0,8 85gr LEFT 100 1 Bovenmes H=66,5mm, R=0,8 85gr RIGHT 100 1 Ondermatrijs V10, R=0,8, 85gr 835 2 Ondermatrijs V10, R=0,8, 85gr 415 2 Ondermatrijs V10, R=0,8, 85gr 300 1 Ondermatrijs V10, R=0,8, 85gr 150 1 Ondermatrijs V10, R=0,8, 85gr 50 1 Ondermatrijs V10, R=0,8, 85gr 40 1 Ondermatrijs V10, R=0,8, 85gr 20 1 Ondermatrijs V10, R=0,8, 85gr 15 2 Ondermatrijs V10, R=0,8, 85gr 10 1 Totaal 26 Price € 2250,-- New prijs € 3250,--
Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Perthel, pipe bending tool for profile bending machine -Profile diameter: Pipe size 16 - 76 mm / 3/8 to 3 1/4 -Dimensions: 1020/310/H170 mm -Weight: 28 kg
Tool grinding machine, grinding machine, angle grinder, turning tool grinding machine, steel grinding machine -3x grinding wheels: Ø 340 mm, speed 1500 rpm -1x grinding wheel: Ø 170 mm, speed 3000 rpm -Max. steel cross-section: 80 x 80 mm -Dimensions: 1300/900/H1450 mm -Weight: 500 kg
Tool Revolver 8-speed Mazak Quick Turn 10N Machine used, good condition from assembly of a MAZAK Quick Turn 10N CNC lathe My. 1985 satted with 8 tool-places Turret 290 mm Space requirement LxWxH: 580 x 460 x 380 mm Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8904
Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -Tool holder: 27 mm -Number: 9 recordings -Price: per piece -Dimensions: 73/67/H197 mm -Weight: 4.7 kg
Notching tool, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch stamp -Release tool: pneumatic -Notch: 18 x 9 mm -Dimensions: 180/200/H270 mm -Weight: 4.8 kg
Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos -Dimension: 4050/45 / H130 mm -Weight: 147 kg
Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg
Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for press brake, die tool -Measures: see drawing in the photos -Dimension: 3060/20 / H79 mm -Weight.: 30.3 kg
Base for press brake tool, bending tool, die, bottom knife, lower tool, prism tool, reversible prism, 1-piece die block for die bending machine, die tool, folding tool -Tool: for press brake, base for press brake tool -Dimensions: see drawing in the photos -Dimensions: 2500/70/H22 mm -Weight: 26.1 kg
Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Punching tool for: holding dies -Borry hole diameter: 50 mm -Dimensions: 335/220/H180 mm -Weight: 42 kg
Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 90° -Drawing: in the photos -Dimension: 33 x 170 mm -Length: 1485 mm (1 x 855/630 mm each) -Weight: 44.6 kg
Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 90° -Drawing: in the photos -Dimension: 29 x 171 mm -Length: 1570 mm (1x 650/500/420 mm each) -Weight: 41.2 kg
Cup grinder, swivel arm grinder, carbide chipbreaker groove grinder, tool grinder, grinder, angle grinder, lathe tool grinder -Grinding head: swiveling -Clamping table: 410 x 410 mm -Magnetic disk Hitachi: 470 x 160 mm -Abrasive tool diameter: 90 mm -Dimensions: 1440/760/H1745 mm -Weight: 712 kg
Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Angle: 90° -Dimensions: 55 x 133 mm, see drawing in the photos -Length: 365 mm -Weight: 9.8 kg
measuring range X-axis: 300 mm measuring range Y-axis: 300 mm Table dimensions: 800 x 800 mm taper ISO: 30 voltage: 220 V / 50 Hz total connected load: 0,3 kW weight: 0,5 t dimensions of the machine ca.: 1,5 x 1 x 1,6 m Use: no definition: : • Tool presetter with taper SK 30, SK 40 is also optionally possible, • Display of measured value ZOLLER DA 6050 / 0266, serial no: H320/066 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool for: Press brake -Dimensions: 3000/30/H116 mm -Weight: 48 kg
Crimping tool, cable lug crimping tool, hydraulic crimping tool -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 79 x 250 mm -Weight: 4.0 kg
maximum number of results exceeded
please refine your search
