tool master used for sale

- First registration 03/2017 - only approx. 96,000 km - 125 kW / 170 hp 2.3 ltr. Diesel engine – low emission with AdBlue – Euro 6 - 6-speed manual transmission - DoKa (double cab) 7 seater - 3.5 to.- approval - Flatbed approx. 2.40x2.04 m with divider and aluminium side walls + tarpaulin bow in mint condition - permissible Total weight 3,500 kg - Ball head towbar 2,500 kg permissible Towing capacity (braked) - Driver's seat with heated seats, lumbar support and armrest on the right - 2-seater passenger bench seat (middle section, foldable backrest, with swivel shelf for laptop, etc.) - Rear bench seat 4-seater (seat can be opened with storage space underneath), unused. - Storage compartments above windshield - Airbag driver's side - Exterior mirrors can be electrically adjusted and heated - Outside temperature display - Tachometer - Fuel tank enlarged: 105 Ltr. - ...

turning length: 1000 mm turning diameter: 400 mm turning dia. in gap: 560 mm spindle bore: 52,0 mm turning speeds: 45 - 2.000 U/min bed width: 210 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 100 mm total power requirement: 2,0 / 2,4 kW weight of the machine ca.: 810 kg. range L-W-H: 1.890x800x1.600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 90 mm - Follow-on steady rest - passage diameter max. 70 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake f ...

turning length: 1000 mm turning diameter: 380 mm turning dia. in gap: 490 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 575 kg. range L-W-H: 1920 x 800 x 1660 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake  ...

turning length: 1000 mm turning diameter: 360 mm turning dia. in gap: 480 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 110 mm total power requirement: 1,5 kW weight of the machine ca.: 540 kg. range L-W-H: 1920 x 750 x 1600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake functi ...

A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

turning length: 1000 mm turning diameter: 360 mm swing diameter over bed slide: 220 mm turning dia. in gap: 502 mm spindle bore: 52,0 mm turning speeds: 70 - 2.000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 3 MK quill travel: 100 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 575 kg. range L-W-H: 1825 x 750 x 1600 mm Scope of delivery - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 60 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 280 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gear ...

A Dimeco Alipress coil-to-sheet line with decoiler, straightener, and shear is available. Sheet width range: 200mm-1300mm, sheet thickness range: 1mm-7mm, cross-section range: 1400mm²-3250mm², max. feed speed: 30m/min, max. stroke rate: 150/min, max. material feed: 1000mm/stroke, straightener: Schechtl MSB100. Documentation available. An on-site inspection is possible.

punkt-zu-punkt-Bohrmaschine mit numerischer Steuerung MASTERWOOD SPEEDY 207 für die kundenspezifische Möbelherstellung, Küchenmöbel, Badezimmermöbel und verschiedene Prozesse bohrkopf mit 5 unabhängigen vertikalen Spannfuttern und 1 doppeltem horizontalem Spannfutter säge für Längsschnitte maschinentisch mit 1390 x 750 mm Bohrkapazität und zwei seitlichen Hochfahranschlägen, die von der Steuereinheit gesteuert werden, um mit nur einem Programm und einem Zwischenhalt platten bis zu einer Größe von 2800 x 750 mm auszuführen möglichkeit zum Bohren von 2800-mm-Platten pneumatische Werkzeugverschiebung mm 60 max. plattendicke mm 50 drehzahl der spindeln U/min 4500 sägerotation U/min 6000 vakuumpumpenmotor PS 1.5 Saugnapfdurchmesser mm 80 frontanschlag komplett mit 4 Schließzylindern zum Bohren schmaler Werkstücke und Leisten multitasking-steuerung komplett m ...

SPECIFICATIONS: Work table size: 1000 x 310 mm Working depth: 130 mm Longitudinal stroke of the work table: 400 mm Transverse stroke of the work table: 150 mm Installed power: 2.95 kW EQUIPMENT: 02 Workpiece stop guides Accessories

Aufschnittmaschine / Slicer GRAEF MASTER 3020 Specifications: 230 Volt / 50 Hz / 2.2 A / 500 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 300 mm Stainless steel knife incl. grinder Luminous flux Machine with CERA 3 coating Weight: 37 kg External dimensions (L/W/H): 500 x 600 x 420 mm Cutting size: L 260 x H 195 mm Cutting thickness 0 – 24 mm Carriage dimensions: L 260 x W 300 mm Installation area: L 540 x W 440 mm External dimensions: L 600 x W 570 x H 420 mm Working area: L 680 x W 720 x H 570 mm Knife speed: 230 rpm with weighing function up to 0 - 5,000 g (not legal-for-trade) Year of manufacture: 2018 Function checked, machine ready for immediate use! RRP: EUR 5,057.50 Condition, see original pictures! If you have any questions, email or call.

General SKU383U1043 MakeNetzsch TypeMastermill 3 No.2404563 Year of construction2015 LocationBarneveld Main Features MaterialStainless steel Volume10 Ltr. Motor2.2 KW Specified Features - Sand mill Vertical sandmillBasket Mill Capacity9 Ltr. Housing dimensions Dia. 220x250 mm InletDia. 220 mm With sievecheck With jacketcheck Motor2,2 kW With variable speed drivefrequency converter Rotor speed1100-3000 rpm With ballscheck MaterialPlexiglass/acrylic glass, Stainless steel 1.4552 With jacketcheck General With switchgear(as is) Floorspace1,2x0,9 m Total height1,2 m Weight630 kg CEcheck ATEX designedcheck Extra information Drive power mill, 2,2 kW, drive power stirrer 0,75 kW, mill speed 1100-3000 rpm, mixer speed 180-2600 rpm, basket volume 0,5 ltr,  StarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarSand millsConfectioneryDyes & pigmentsM ...

Energy chain, energy guide, 9000 mm, Master L60, Kabelschlepp, mint condition Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new! The part comes from a spare parts warehouse at a manufacturing plant, has never been used, is new and has only very minor signs of storage. Energy chain, energy guide, Kabelschlepp company, as good as new, Master L60, KR135 /300x90mm open, inside 270x60mm, total length 9000mm, Includes 3 connecting parts, Various separating elements in the cable guide that can be removed.. Material: plastic and aluminium 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Al ...

: 0350 mm : 196 mm : 0650 mm : 170 mm : 42 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Article No.: 91256 // S. No.: 91228 Work Surface: 48,3 cm W x 34,3 cm H

Works well Machine is in Spain Standard configuration with cutting range 2500 × 1550 No. 1 Automatic CNC saw with milling unit and multi-spindle drill head, model MASTERCUT 2500 × 1550, with the following characteristics: Angle of rotation of the saw: ±90° Servo motors: Digital servo motors from YASKAWA Flywheels: Ø 800 mm made of cast iron Cleaning systems for the flywheels Saw Position Sensor Suction nozzle: Ø 150 mm Compressed air requirement: 6–7 bar Self-braking motor for the flywheels: 7.5 kW Automatic lubrication of all components Pneumatic Tensioning of Flywheels Maximum cutting length: 2500 mm Maximum cutting width: 1550 mm Maximum cutting height: 0–150 mm Minimum cutting radius (depending on the saw blade): 65 mm with 13 mm saw blade Dimensions of the saw blade: 5,450 × 13 × 0.6 mm or 5,450 × 16 × 0.8 mm  ...

Inv. Num. : 8951 Type: TDC 622 EDGE MASTER Producer: MECAL Created: 2023 Parameters: Maximum sawing speed: 2400 1/min Cutting length: max. 6000 mm Engine power: 13.5 kW Machine weight: 3200 kg

Type M14 M.A. 16,2 EFFICIENCY 27% TURN TO CLOSE 15 RATIO 16:1 MAX IT 136 MAX OT 2200Nm

used processing center brand: Masterwood Type: MasterDrill TF 600 SA Year: 2020 With the TF 600 SA processing center, panels of different sizes can be processed one after the other from all 6 sides without interruption. The workpieces are transported along the X-axis by means of two independent grippers. The grippers are NC-controlled and also serve as a reference stop for aligning the workpieces. They are also equipped with a device for automatically measuring the workpiece thickness. Max. Feed speed of the grippers: 130 m/min. Minimum and maximum workpiece dimensions: - Workpiece thickness: 8~ 60 mm - Workpiece length: 400 ~ 2500 mm - Workpiece width: 400 ~ 950 mm Drilling heads: - The drilling heads are made in one casting of aluminum alloy. Two drill heads machine the workpiece from above, one from below. This drilling head arrangement makes the TF 600 SA a versatile machine ...

This DMC MASTERBRUSH MB 1350 M4 woodworking machine was manufactured in 2011. It features a control computer with a 10.4 LCD color touch screen, a vacuum motor power of 11 Kw, and a feed motor power of 2.2 Kw. The machine can handle product thicknesses from 8 to 200 mm and speeds up to 18 m/s. Ideal for precise woodworking tasks, the DMC MASTERBRUSH MB 1350 M4 machine we have for sale. Contact us for further details.

This 6-axis PEDRAZZOLI Bend Master 42 MRV IMS CNC was manufactured in 2001. It features a max tube diameter of 42 mm, a min tube diameter of 6 mm, and a max bending radius of 270 mm. With a power of 22 kW and a bending length up to 3000 mm, consider the opportunity to buy this PEDRAZZOLI Bend Master 42 MRV IMS CNC roll bending machine. Contact us for more information about this machine.

Manufacturer: Rubble Master, • Model: RM80, • Year of manufacture: 2008, • Operating hours: approx. 6,000 h, • Engine: Deutz diesel engine – 163 HP, • Maksimale Produktionskapazität: bis zu 150 t/h, • Maximaler Vorschubgröße: 700 mm, • Impact Crusher: 4-hammer system, • Conveyor belt: 300 × 80 cm, • Machine length: 820 cm, • Machine height: 296 cm, • Machine width: 246 cm, • Machine weight: approx. 23,000 kg, Manufacturer: Rubble Master, • Model: RM80, • Year of manufacture: 2008, • Operating hours: approx. 6,000 h, • Maximum production capacity: up to 150 t/h, • Maximum feed size: 700 mm, • Impact crusher: 4-hammer system, • Conveyor belt: 300 × 80 cm, • Machine length: 820 cm, • Machine height: 296 cm, • Machine width: 246 cm, • Machine weight: approx. 23,000 kg

Dosing device for liquid nitrogen, manufacturer Terboven, type LIN-Master-SCT, year 2018, to increase the pressure of bottles / cans filled with non-carbonated beverages,, for displacement of oxygen in the headspace of filled bottles / cans, glasses., electr. operation of the valve to release the dosage,, up to 28,000 containers / h are possible (depending on the dosing time), The device is installed in such a way that the liquid nitrogen outlet of the dosing device is centered over the container. This ensures that the full cross-section of the opening can be used., Different signal detections determine the exact position of each individual container and give a corresponding release signal to the dosing head., In order to keep the outlet area dry and free of ice, there is a continuous flushing with gaseous nitrogen.

CARTOBOL ECOFILL MASTER "Bag in Box" automatic line for industrial liquid packaging (2021). Low usage. Designed for standard VITOP® DN15 Bag in Box fitments. Suitable for volumes from 3 to 20 litres. Complete line comprising ECOPACK MASTERFORM automatic case former for B1–B1 cartons with central sealing, minimum/maximum carton dimensions 100 × 220 / 115 × 225 mm and minimum/maximum carton height 210 / 400 mm; ECOFILL MASTER automatic filling machine with production capacities of approximately 780 bags/hour at 2.25 litres, 600 bags/hour at 5 litres and 290 bags/hour at 20 litres; 100-litre pressurised buffer tank; ECOPACK HOTMELT hot-melt case sealer; and automatic cartesian palletiser for 3 to 10 litre Bag in Box cartons, configured for continuous, accurate and reliable production.

Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Year of Make: 2014 Operating hours approx.: 7,024 Control: iMSNC Work surface: 3,000 x 2,000 mm 1 plasma torch power source Kjellberg HiFocus 280i neo with all-gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access through TeamViewer 15 m hose package Without suction 1 x Asper Win Basic nesting software + autom. Nesting on the machine control All-throttle = allows you to change the throttle to improve the quality of the cut and Adapt the cutting speed to the material.

Masterfill Filling Machine S 500, The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products., Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards., The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill ...

A defective CHC stone processing center Intermac is available. Travel X/Y: 2300mm/1000mm, material thickness range: 2mm-25mm, speed: 12000rpm, machine dimensions X/Y/Z: approx. 4700mm/2700mm/2700mm, weight: approx. 3500kg. A cost estimate from the manufacturer is available. Documentation available. An inspection on site is possible.

Tires, solid rubber tires, forklift tires, complete wheels -Handover: in its current condition as inspected -Tire condition: see photos -Manufacturer: Master Solid, solid rubber tires type Super Elastic, 2 pieces -Tire size: 6.50-10 RIM 5.00F-10 -Bolt circle: Ø 150 x 13 mm -Recess: Ø 120 mm -Price/Sale: complete -Dimensions each: Ø 570 x 160 mm -Weight: 96 kg

Finger end mill, end mill, milling cutter, roughing end mill, cylinder candle cutter -Manufacturer: Master Fraisa, roughing end mills, 3 pieces -Fraisa: 2 pieces Ø 40 mm type 40 0660 TG125 Stg250 -Master: 1 piece Ø 32 mm type 770 CX 120 STG 207 bf -Price/Delivery: complete: only complete -Transport dimensions: 205/110/40 mm -Weight: 3.3 kg

Sealing machine Dimensions de la clutch : 650 x 450 x 170 mm Sealing length : 650 mm Speed : 0 - 12 m/min Sealing temperature : 0 - 250 °C

Eppendorf Mastercycler Ep Gradient s Realplex 2 Thermal Cycler Thermal cycler model 5345 + 6300 EPgradient S Weight: 20 kg Voltage: 220V Dimensions 60×30×50 cm Without software

Used separator/muscle demusing machine from Meat Master type M18 / P-100-S. Year of manufacture 1999. Manufacturer's documentation. CE

Eppendorf Mastercycler 5332 Personal PCR Thermal Cycler Temperature range: 4°C - 99°C Temperature distribution: 95°C ± 1.0°C Temperature accuracy: ± 0.2°C Sample capacity: 25 x 0.2 mL tubes or 16 x 0.5 mL tubes

Code: 0359 Brand: MASTERWOOD Model: TEKNOMAT 2000-P - CE Standard Electronic anuba inserting machine with 2 controlled axis for inserting anuba hinges – CE Standard Technical specifications: Working stroke length 3100 mm – Displacement speed 72 mt/min Working stroke height 350 mm – Displacement speed 15 mt/min Working stroke depth 150 mm - Displacement speed 15 mt/min Working table mm 150 x 3800 N° 2 rear stops with manual positioning N° 4 rear bracket-type clamps with reference stops Side stops with manual positioning 1 right - 1 left 2 pneumatic front clamps Anuba unit with double magazine for male female anuba hinges - Diameter 14 mm Tilting head - 7 + 90° Double stem anuba screw device Front fences on machine table for machining of assembled doors and windows Control CNC 2: Microprocessor control unit – Digital display – Multitasking operating syst ...

STM WS 3015 MasterCut 2D waterjet cutting machine was built in 2013 in Germany by STM STEIN-MOSER GmbH. The machine has been regularly maintained throughout its service life, which means that it is in very good technical condition and ready for further use. The STM WS 3015 MasterCut 2D is an extremely versatile machine for precision machining of a wide range of materials, i.e. metal, plastics and glass. It is distinguished by the use of modern components and a robust design, which remains stable even under the most demanding challenges. The machining process is performed by a numerically-controlled workhead, which moves in three axes X,Y,Z with feeds of 3002 mm, 1502 mm and 180 mm respectively. Only water or water with an abrasive additive is used for cutting, making the process free of harmful fumes and safe for the environment. The use of waterjet cutting technology in production gu ...

Malvern Mastersizer 3000 + Hydro LV - Advanced particle size and size distribution system - Widest measurement from 0.01 – 3500 µm - Currency: MYR PIC: - Dr. Wong Sze Ting (013 939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)

This 4-axis MASTERWOOD Ks 21.31 wood boring machine was manufactured in 2019. It features an impressive XYZ working dimension of 3100 x 2150 x 100 mm and a tool magazine with a maximum capacity of 12 tools. The machine is equipped with an automatic loading and unloading system using suction cups and has a 360-degree rotation axis. If you are looking to get high-quality boring capabilities, consider the MASTERWOOD Ks 21.31 machine we have for sale. Contact us for further details.

CNC working center model BUSELLATO S-MASTER H150 second hand machine 3 axes working condition : very good CE mark : YES volt. 380/50 composition : 1. vertical router with automatic tools change 2. horizontal router 3. boring unit X / Y ( horinzontal and vertical ) 4. saw blade unit useful size (working range) mm. 3200 x 1350 working travel of the axes : X=4000 mm. Y=1430 mm. Z=265 mm. maximum panel thickness mm.120 maximum panel clearance mm.150 installed power 16 kW machine weight 4500 kg

Allen Bradley Guard Master 450L-E4FL1800 - safety barrier Brand: Allen Bradley Guardmaster Product type: Light curtain Series: 450L-E Beam Resolution: 14mm Component Type: Transceiver Protection Type: Type 4 Standards/Approvals: TUV, IEC Protection height: 1.8m Maximum protective width: 9m Maximum supply voltage: 24V Minimum Scanning Distance: 0.5m Maximum Scanning Distance: 9m Height: 1.8m Length: 30mm Width: 30 mm Maximum response time: 20ms Connector Type: Screw

This 3-axis MASTERWOOD OM B1 CN3KF was manufactured in 2010. It features a Bedano head and a horizontal milling motor, ideal for creating slots for shutters or blinds. With a working length of 2600 mm and a very good condition, it includes a PC with integrated software running Windows XP. Consider the opportunity to buy this MASTERWOOD OM B1 CN3KF CNC Wood Machining Centre. Contact us for more information.

Can filler CFT type Master Can Tronic RS 40/6 with 40 filling valves and 6 head can seamer isobaric filler year of manufacturing: 2013 capacity: 20 000 cph by 500 ml standard cans, on beer 24 000 cph by 330 ml standard cans, on beer can end: 202 Can diameter - min-max.: 50 - 66 mm Can height - min-max: 75- 190 mm pitch: 141 mm incl. lid feeding system incl. control system: PLC Siemens S 7 filling product: beer filling temperature: 2-4°C as nice range for beer The last major service combined with an upgrade of the machine was done in November of 2024. The machine is still in production until the end of June/ bginning of July 2026.

Max. size= 750 x 106 cm, Availability= 052026, Masterwork (Heidelberg) Automatic Diecutter with Stripping Station Max sheet size : 750 x 1060 mm Min Sheet size : 360 x 400 mm Max speed ; 7,700 sph Max cutting pressure : 260 tons Calliper : Min 90gsm Max 2000 gsm Complete with : Touchscreen machine operation Non-stop pallet feeder Belt table Centerline system by Punching- and Stripping stations Non-stop delivery LOT Loaded in truck or container

This 6-axis REIGNMAC 520 Moulding Master was manufactured in 2016. It features a working width of 20–200 mm and a working thickness of 8–120 mm, with a feed speed of 6–24 m/min. The machine is equipped with six spindles, with a spindle speed of 6000 rpm and a maximum tool diameter of Ø145 mm. If you are looking to get high-quality woodworking capabilities, consider the REIGNMAC 520 Moulding Master machine we have for sale. Contact us for further details.

Manufacturer: Rubble Master, Model: RM80GO!, Year of construction: 2013, Condition: Used, ready for operation, Operating hours: 8080 h, Dead weight: approx. 23,600 kg, Inlet opening: 860 × 650 mm, Rotor: 4 strike plates, Rotor diameter: 850 mm, Max. task piece size: about 650 mm, Engine: John Deere diesel engine, Cylinder: 6, Power: 40 kVA, Power: 40 kVA, Tension: 400 V, Sieve surface: 1.050 × 800 mm, Bandwidth: 800 mm, Drop height: approximately 2,990 mm, Volume: about 2.6 m³, Length: 9.275 mm, Width: 2.435 mm, Height: 2.990 mm

Generator Circuit Breaker Schneider Electric Merlin Gerin Masterpact NT 10 H1 1000 Ampere New and original packaging

diameter range 6 mm shaft length under head 25 mm output pieces/min 100