tool master used for sale

: Italien Eurostamp Tooling is quality, competence and precision. Since 1970, we have been producing exceptionally precise tools and offering extremely high-quality solutions for all those customers who constantly require the highest level of performance and reliability. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0187 : prompt, Zwischenverkauf v : 2912 € : 1 mint condition 3 x 835 + 1 x 835 mm sectioned ATTENTION: 50T tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

voltage: 20-250 VAC V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

voltage: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered for sale is an Optimum toolroom milling machine. Drilling capacity in steel: 30mm, continuous drilling capacity in steel: 25mm, spindle taper: ISO40, quill travel: 120mm, milling head swivel range: +/-45°, cross table X/Y: 1000mm/240mm, max. cross table load: 160kg, X/Y/Z travel: 580mm/200mm/340mm, X-axis table feed: 720mm/min. Including accessories. The tray has been cut open on the right-hand side so that longer workpieces can also be machined. Dimensions X/Y/Z: approx. 2270mm/1500mm/2100mm, weight: approx. 900kg. An on-site inspection is possible.

MAHO MH 800 P - Tool Milling Machine - Recording: ISO40 - X/Y/Z: 700 / 450 / 500 mm - Occasionally problems with the measuring system due to contamination - Occasional failures during rapid traverse - in this case the machine must be switched off and on - Year of construction 1980 Technical data Main Gear: - Sliding gear geometrically stepped: 1.25 - Number of gears: 18 Horizontal & vertical milling spindle: - Speed range: 40 - 2000 rpm - Tool holder: ISO 40 - Tool clamping: hydromechanical - Quill stroke vertical/horizontal: 100 mm Quill feed gear (vertical): - Autom. Quill feeds: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Workspace (manual & automatic): - Longitudinal adjustment (X-axis): 700 mm - Vertical adjustment (Y-axis): 450 mm - Headstock (Z-axis): 500 mm Feeds: - Infinitely variable in X/Z: 10 - 500 mm/min - Infinitely variable in Y: 5 - 250 mm/m ...

Robotic Brushing Cabin manufactured in 2015. This M.A.I. ASD 1 features a KUKA 6-axis industrial robot arm and a Siemens SIMATIC Touch Panel for intuitive control. It includes a mobile Ruwac industrial dust extraction system and a central vertical clamping fixture for workpiece positioning. With comprehensive safety features such as a fully enclosed booth and emergency stop controls, this machine ensures a secure working environment. If you are looking to get high-quality brushing capabilities, consider the M.A.I. ASD 1 machine we have for sale. Contact us for further details.

HAAS Schleifmaschinen MULTIGRIND CA ist eine CNC Werkzeugschleifmaschine mit hoher Präzision, hoher Genauigkeit und Zuverlässigkeit. Sie verfügt über 5 Achsen: X 630 mm, Y 345 mm, Z 430 mm; Schleiflänge 500 mm; Schleifdurchmesser 260 mm; max. Schleifscheibendurchmesser 250 mm; C-Achse (Spindel) Auflösung 0,001°; Schwenkwinkel -225° bis +70°; Auflösung 0,0001 mm. Anschluss 50 Hz, 3x 400 V; Maschinengewicht ca. 8500 kg; Abmessungen L 2650 x B 2400 x H 3200 mm. Ausgestattet mit Lade- und Entlade-Roboter sowie Feuerlöschanlage. Entwickelt für enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

Table size: 400 x 800 mm Travel x/y/z: 620/420/400 mm Quill Hub: Spindle holder: SK 40 Vertical milling head can be swivelled in 2 planes Spindle speeds: 63 - 3150 rpm electr. Connection: 400 V Space requirement: 1800 x 1700 x 1900 mm Weight approx.: 1.9 t

Tool changers from HOMAG Shipping also abroad. Viewing: Basically, I would like to point out that the item can be viewed before buying in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Table 600 x 300 mm Travel distances X / Y / Z: 400 / 300 / 350 mm Spindle holder SK 40 Spindle speeds: 50 - 2500 rpm Drive power 2.2 kW Accessories: Vise, dividing head, rotatable vertical milling head, Weight 1,500 kg Machine dimensions: L 1485 x W 1475 x H 1680 mm Instruction manual in German

table length: 840 mm table width: 600 mm ampere: 60-120 A total power requirement: 15-23 kVA weight of the machine ca.: 2,75 t dimensions of the machine ca.: 2760 x 1110 x 1840 m With controlled C-axis and 16-position tool changer. WORKTABLE Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance table to quill without chuck (max / min): 595 / 180 mm WORKHEAD X - Y travel: 565 x 400 mm Z travel: 415 mm X - Y - Z resolution: 0.001 mm C-axis resolution: 0.001 deg. Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Rated current: 60 – 120 A Power rating: 15 – 23 kVA Dimensions (height x width x depth):  ...

measuring range X-axis: 300 mm measuring range Y-axis: 250 mm measuring range Z-axis: 600 mm tool diameter: mm Table dimensions: mm Control: weight: 700 kg dimensions of machine: 2600 x 1400 x 1900 mm coolant tank: 800 x 600 x 920 mm Presetting, shrinking and measuring machine Software saturn 1 Zoller Multivision II Without toolholders. On 30. May 2022 the machine was checked by a technician from ZOLLER. Shrinking is currently not possible. The induction spool and the control unit for it must be renewed. The purchase price of a comparable new machine (incl. software) from ZOLLER is approx. 100.000 EUR, with a current delivery time of approx. 52 weeks ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 780 mm table width: 500 mm ampere: 60 / 120 A Control: Heidenhain total power requirement: 14,0 KVA weight of the machine ca.: 4,0 t dimensions of the machine ca.: 3,0 x 2,0 x 2,1 m Sinker EDM machine Control: Heidenhain / Erocom Table: 780 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A pallet of clamping devices – threaded rods – collets – clamps – clamping clamps – threaded rods – clamping devices – clamping aids – means for clamping – clamping tool

max. grinding diameter: 175 mm grinding length: mm workpiece length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: SAACKE Model No.: UWIE Year: 2003 Condition: Used Stock No: 9484 Switch-on hours: 134460 h Hours: 15884 h X-axis travel: 340 mm Travel Y: 240 mm Travel distances Z-axis: 840 mm Maximum spindle speed: 10000 1/min Machine height: 2090 mm Machine length: 2450 mm Machine width: 2050 mm Machine weight: 3900 kg

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...

Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...

consisting of approx. 69 pieces , mostly equipped with lathe accessories such as turning steels, cutter heads, indexable insert milling cutters and holders Auction-ID: A7-49089-218

Key data: 500 mm, 350 mm, 300 mm

Technical data: Manufacturer: Mitsubishi Type: FA20 S Advance Year of Make: 2012 Control: Mitsubishi Advance Travel distances X/Y/Z: X 500 mm, Y 350 mm, Z 300 mm Travel U/V: +/- 75 mm Feed rate in X/Y/Z: 1,300 mm/min Conical angle at workpiece width: 15° Max. workpiece dimensions: 1,050 x 800 x 295 mm Max. workpiece weight: 1,500 kg Wire diameter: 0.07 – 0.3 mm Condition Condition: Used Functional: Tested and fully functional

consisting of approx. 122 pieces , most of which are equipped with cutting tools such as cutter heads, indexable insert milling cutters, carbide milling cutters, taps, twist drills, internally cooled drills and solid drills, as well as boring tools Auction-ID: A7-49089-29

consisting of approx. 73 pieces , most of which are equipped with internally cooled indexable insert drills, indexable insert holders and turning steels including tool carrier system from the manufacturer GARANT Auction-ID: A7-49089-327

consisting of approx. 59 pieces , most of which are equipped with lathe accessories such as turning steels, cutter heads, indexable insert milling cutters and holders Auction-ID: A7-49089-217

consisting of approx. 110 pieces , most of which are equipped with cutting tools such as cutter heads, indexable insert milling cutters, carbide milling cutters, taps Auction-ID: A7-49089-28

the exact circumference cannot be determined, as two layers including the loading of cutting tools such as indexable insert drills, internally cooled drills, milling cutters including a pallet with tool carrier boxes Auction-ID: A7-49089-221

consisting of approx. 87 pieces , most of which are equipped with cutting tools such as indexable insert milling cutters, twist drills, internally cooled indexable insert drills, turning steel holders and turning steels including tool carrier system from the manufacturer LUTZ Auction-ID: A7-49089-330

consisting of approx. 69 pieces , mostly equipped with cutter heads, long drills incl. tool carrier trolley Auction-ID: A7-49089-224

incl. indexable insert drill and indexable insert holder Auction-ID: A7-49089-365

the exact circumference cannot be determined, as two layers including the loading of cutting tools such as taps and drills including a pallet with tool carrier boxes Auction-ID: A7-49089-222

Key data: 470 A, 550 , 60

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Boring heads in different designs and sizes, mainly from the manufacturer KELCH , including a device for indexable inserts, as well as various clamping devices Auction-ID: A7-49089-31

Machine number: 344169 Operating voltage: 400 V Frequency: 50 Hz Rated current: 20 A Connection: 12 kVA Control: HEIDENHAIN Table dimensions: 650 x 350 mm with 5 grooves Groove spacing: 63 mm Max. load: 250 kg Travel X-axis: 400 mm Travel Y-axis: 320 mm Travel Z-axis: 400 mm Max. distances top of the table to horizontal spindle center: 140 - 540 mm Top of the table to vertical head bottom edge: max. 430 mm Tool holder: SK 40 Speed: from 0 - 4000 rpm Quill stroke vertical: 60 mm Vertiakl head swivel on both sides: 90° Feed longitudinal and transverse: 0 - 2000 mm/min Rapid traverse longitudinal and transverse: 5 m/min Feed vertical: 0 - 2000 mm/min Rapid traverse vertical: 4 m/min Auction-ID: A7-49089-475

consisting of approx. 163 pieces , most of which are equipped with cutting tools such as milling cutters, drills, taps, internally cooled drills and boring tools including the GARANT tool carrier system Auction-ID: A7-49089-207

CNC lathe with driven tools, year 2004, CNC 18i-T. Used machine. More info & price on IndustrialBuyer.

Wire EDM Machine Charmilles FI 240 SP BJ 2008

IMPORTANT - PLEASE READ If you are interested, please contact us by phone. Location of the machine on request Sale preferably from location, buyer organizes dismantling and transport For sale is a high-precision tool milling machine from the Austrian manufacturer EMCO, model FB-5 (Emcomat). This industrial machine is appreciated in toolmaking, prototyping and training workshops for its excellent geometry and reliability. Equipped with universal table as well as horizontal & vertical spindle for maximum versatility in milling and drilling work including extensive accessory package (various cutter holders/SK40 taper; clamping devices etc.)

B-Stock / Transport Damage · Sheet steel construction with resistant powder coating · equipped with drawers and pull-out shelves, with rim on all sides, height 30 mm, on ball-bearing precision pull-outs, 100 % extendable · Drawers, H 100 mm and shelves in 25 mm increments height-adjustable · Load capacity per shelf/drawer 35 kg · upper shelf with roll-off edge · Hinged door lockable with cylinder lock and twist bolt lock with 3-point locking Other technical features: · Load capacity per drawer: 35 kg - Tool cabinet with 1 large-capacity drawer 2 pull-out tray shelves - Dimensions: 1000 x 1000 x 500 mm - Drawers, H 100 mm and shelves in 25 mm increments height-adjustable - Load capacity per shelf/drawer 35 kg Auction-ID: A7-49816-95

Tool quick coupler for drills 'Recording MK4 (with adapter MK5 ) Inserts : 8 MK3 pcs, 6 pcs MK2 1 MK1 pc, suitable for drilling machines, boring mills, lathes, ...

Universal tool grinder DECKEL S 11 with accessories & tool cabinet -Grinding stroke 190mm -Grinding stroke for twist grinding 190mm -Longitudinal adjustment grinding spindle approx. 5mm -Vertical adjustment grinding head approx. 320mm -Transverse adjustment tool carriage approx. 100mm -Adjustment ranges: -Grinding head carrier approx. 800mm -Tool carrier approx. 215mm -Universal / part head approx. 330mm -Swivel angle / grinding head carrier 360 degrees / grinding head 360 degrees / tool carrier 360 degrees -Clamping surface tool carriage approx. 500x180mm -Max workpiece diameter between the tips 130mm -Max. workpiece diameter / flying clamping (universal parting head) 620mm -Digital display -Measuring optics -Other accessories ( SEE PICTURES) -Documentation -Tool cabinet

Various Machine Tools and Measuring Instruments Type: Assorted machine tools and precision measuring equipment Contents: Mixed lot including micrometers, internal measuring rods, dial indicators, tool holders and gauge blocks Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49922-54

Hexagon M&H RWP38 – Tool Setting Probe 3D ISO50 Auction-ID: A1-49922-67

CNC lathe with driven tools, year 2018, CNC NGC. Used machine. More info & price on IndustrialBuyer.

Various Tool Quick Couplers, PARAT, WDR 4 , WDL4, WD4, WB4 , Price per quantity on request

7 pcs Index VD30 mounts with capto interface, 3 pcs driven by it, mint condition!

Approx. 100 pcs Capto C4 adapter, see photos

Approx. 23 Pcs. Preciflex Adapters - Used