tool master used for sale

: gebraucht : 2004 : 4540 : ca. 2 Wochen ab Auftragse : Österreich : 19900 € : 1 : 63 - 3150 (18) U/min : 700 x 500 x 500 mm : 900 x 500 mm : 6.6 kW : 2150 mm : 2220 mm : 2120 mm : 2550 kg : 500 kg : 100 mm CNCHeidenhain TNC 410 18. mech. feeds with rapid travel in X,Y,Z axes ball screw spindles toolmaker accuracyDIN 8615 hyd. tool clamping with holdersSK40 vertical und horizontal vertical spindle+/- 30° swiveling swing out device digital 3D edge finder work area protection coolant equiptment aut. central lubrication fixed angle table with 10 t-slots chip collecting tray machine lamp users manual in GERMAN + CE COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0042 : 950 € : 1 : 835 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0081 : 177 € : 1 : 835 mm : 1 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0180 : prompt, Zwischenverkauf v : 1800 € : 1 : 3100 mm : 80 mm : 80 mm : 86° 10/15/20/30/40/50mm mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: for profile steel shears, flat steel shears, 2 pieces -Hole spacing: 135 x Ø17 mm -Dimensions: see photos -Submission/Price: complete -Dimensions each: 175/107/H125 mm -Weight: 6.1 kg/pc.

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Notching die for profile steel shears, flat steel shears -Dimensions: see photos -Dimensions: Die 240/90/H125 mm / Punch 200/85/H170 mm -Weight: 33.9 kg

Key data: 1250 , 174 , 43

SANDRETTO serie 9 T 430/125 Clamping force : 125 T / 1250 KN Distance between tie bar : 475 x 475 mm Platen dimensions : 600 x 600 mm Mould thickness min / max : 150 - 480 mm Opening strocke : 470 mm Screw diameter : 43 mm Injectable volume : 274 cm3 Pressure on material : 1566 bars Weight : 6200kg

Spindle cut-off device Schaublin 102 - Type F. Mint condition, never used, with traces of storage.

Quick-release drilling device for milling machine, drilling machine. Drilling barrel diameter 5 mm. DIN 6348 - size 0.

Set of 5 multi-spindle heads from the Swiss brand Pibomulti. Incomplete, lack of clamps and nuts for tightening the bits.

Wooden box of individually wrapped clamps with plastic film. The accuracy class is 0.008 mm. ER20: 12 clamps with diameter 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

Wooden box of individually wrapped clamps with plastic film. The accuracy class is 0.008 mm. ER25: 15 clamps with diameter 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16

Wooden box of individually wrapped clamps with plastic film. The accuracy class is 0.008 mm. ER30: 18 clamps with diameter 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20

: gebraucht : WA0178 : 279 € : 1 : 835 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0102 : 292 € : 1 : 835 mm : 80 mm : 25 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0147 : 890 € : 1 : 3050 mm : 105 mm : 85 mm (screwed 5x from above) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 450 mm z-travel: 500 mm Control: CNC 332 / TNC 355 total power requirement: 5,5 kW weight of the machine ca.: 4 t dimensions of the machine ca.: ca. 3 x 3 x 2,5 m No. 2213 Universal tool milling machine MAHO MH 800 T Working area: 800 x 450 x 500 (800 longitudinal / 450 vertical / 500 transverse) Drive: 5.5 kW Control: Heidenhain CNC 332 / TNC 355 Universal built-in rotary table Coolant device Chip tray Splash guard half cabin, tool clamp Technical documentation Tool holder ISO 40, Table clamping surface 600 x 900 m, max. table load 500 kg, quill stroke 80 mm Speed range 63 - 3150 rpm Feed rate 1 - 1500 mm/min Rapid traverse: 4.5 m/min Weight: approx. 4 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mm y-travel: 400 mm z-travel: 370 mm Control: Retrofit Dialog 11 - 7.07 table surface area: 1400 555 mm total power requirement: 5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 332,2 m Packing: 3 m Retrofit by FPS Alternate NC - Rotary Table available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool taper: VDI shaft cross cut: 40 tool taper: Okuma ratio: ? turning speeds: ? U/min : ? coolant: ? Set of tool holders VDI 40 with drive ( 8 pieces ) suitable e.g. for OKUMA box dimensions approx. 500 x 300 x 200 mm weight approx. 50 kg 3 x EPPINGER 4.200.231 drilling and milling head 3 x EPPINGER 4.200.289 drilling/milling head 1 x Drill- Milling head WTO 4 1 06 1 6006 - 40 1 x COROMANT 410 1200 72 - 40 drilling and milling head 1 x 2-jaw chuck KH 1-40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Dialog 3 / 4 type of control: CNC Fräsen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 610/710 mm width: 625 mm height: 830 mm weight: ca. 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool taper: VDI 40 DIN 69880 number: 22 Stück A range of tool holders in good condition. Tool holder size: VDI 40, DIN 69880 Were used on a Gildemeister CTX 500 E CNC lathe. Quantity: 1 driven tool holder, angled design. 18 driven tool holders, straight design. 3 standard tool holders. Only sold in a package! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 315 mm y-travel: 180 mm z-travel: 320 mm taper in main spindle: ISO 40 table surface area: 600 x 250 mm T-slots: 5 Stk. turning speeds: 45.0 - 1950 U/min feed stepless: 10 - 170 mm/min voltage: 400 V total power requirement: 5.1 kW weight of the machine ca.: 1300 kg range L-W-H: 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained () Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot clamping table - Axis feed with rapid traverse in Y-axis Rapid traverse continuously adjustable - Manual axis adjustment in Z+X axis - Control cabinet, installed on the left - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 15.000 kg height: 790 - 1350 mm width: 1200 mm weight: 65.0 kg Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 60 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0043 : 129 € : 1 : 835 mm Phase: 1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0007 : 217 € : 1 : 835 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0031 : 228 € : 1 : 835 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0088 : 290 € : 1 : 835 mm divided The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: WA0136 : 3150 € : 1 : 8 mm : 3 x 1.000 & 1 x 1.050 mm complete 30° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0022 : 288 € : 1 : 415 mm : 6 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0041 : 790 € : 1 : 835 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0125 : 122 € : 1 : 835 mm : 0,4 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working range: 1.050 x 650 x 250 mm max. workpiece weight: 400 (800) kg control: Agievision AGIE max. conicity: 30° / 100mm travel -x axis: 500 mm travel -y axis: 350 mm travel -z axis: 426 mm travel U x V-axis: +/-70 / +/-70 mm rapid traverse X-axis: 3 m/min rapid traverse Y-axis: 3 m/min rapid traverse U-axis: 0,6 m/min rapid traverse V-axis: 0,6 m/min rapid traverse Z-axis: 0,6 m/min wire dia.: 0,2...0,33 mm total power requirement: 12,1 kVA weight of the machine ca.: 3,9 t dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m Documents: Wire Eroding Machine AGIE - Agiecut Progress 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: iTNC 530 Heidenhain turning speed range - milling: 20 ~ 12.000 U/min power capacity - milling spindle: 35 / 25 kW tool taper: SK 40 tool piece magazine with: 100 pos. table surface area: 2.600 x 600 mm rapid traverse X-axis: 100 m/min rapid traverse Y-axis: 50 m/min rapid traverse Z-axis: 50 m/min max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg max. table load: 2.200 kg total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 7,0 x 4,2 x 2,7 m Chip conveyor: Coolantsystem: interface 4. axis: 4. axis: 560 mm Seperating wall: oil mist extraction: Tailstock: 350 mm / MK 5 elektr. hand wheel: through spindle coolant: 40 bar Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - in ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 430 mm table width: 300 mm x-travel: 260 mm y-travel: 160 mm z-travel: 300 mm weight of the machine ca.: 0,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 125 mm plate thickness: 2 mm straightening feed: 5-30 m/min total power requirement: 1,5 kW weight of the machine ca.: 460 t Sheet width: 125 mm Sheet thickness: 2 mm Straightening speed: 5 – 30 m/min Total power requirement: 1.5 kW Machine weight: approx. 460 kg (The value 460 t is almost certainly a typo, based on this machine size, 460 kg is the plausible specification.) Strip infeed height: 1,250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 0,5...5 mm punching force: 20 t travel -x axis: 1250 mm travel -y axis: 750 mm number of strokes: 20 per min ram stroke max. - stepless: 40 mm total power requirement: 14 kW weight of the machine ca.: 5 t - max. thickness: 0,5 … 5 mm - travel in X : 1250 mm enlargeable to 2000 mm - travel in Y axis: 750 mm enlargeable to 1000 mm - number of strokes: 20 per min - stroke: 40 mm - Stanz- Ø 100 mm 1,5 mm -( punch diam. and thickn.) Ø 50 mm 3,5 mm Ø 16 mm 12,0 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 6 bar table diameter: / mm table load: / t Pneumatic drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 500 mm material thickness: 0,8-5 mm no. of straightening rolls: 7 sheet width: 500 mm plate thickness: 0,8 - 5 mm straightening roll diameter: 80 mm 2 pinch rolls, diameter: 80 mm Adjustable entry height Pass line: 505 mm Oiling system Roller cage Strip guide: 505 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mm y-travel: 270 mm z-travel: 355 mm tool taper: ISO 50 speeds of spindle (left/right): 25-1400 total power requirement: 3,8 kW weight of the machine ca.: 2 t dimensions of the machine ca.: m X-axis travel: 850 mm Y-axis travel: 270 mm Z-axis travel: 355 mm Tool holder: ISO 50 Spindle speed (clockwise / counter-clockwise, infinitely variable): 25 – 1,400 rpm Total power requirement: 3.8 kW Machine weight: approx. 2 t Infinitely variable feed rates on all axes (X, Y and Z) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 200 x 25 mm Shaft diameter: 20 mm turning speeds: 2.800 U/min saw band speed: 20 m/s total power requirement: 0,75 kW machine weight ab.: 17 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

movement of X-axis: 500 mm movement of Y-axis: 350 mm vert. movement Z-axis: 256 mm workpiece weight max.: 800 kg weight of the machine ca.: 4.5 t : +/- 70 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: tool taper: SK50 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitudinal travel: 400 mm cross travel: 160 mm table length: - mm table width: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain TNC 113 total power requirement: 4 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 222 m No. 5152 Universal tool milling machine Deckel FP 4 M (K) - 2203 Working area: 500 x 400 x 400 Drive: 4 kW Spindle holder SK 40 / DIN-2080 Speed range 50 - 2,500 min-1 Feed rates 8-630 mm/min stepless Rapid traverse 1.3 m/min Fixed table 800 x 460 mm Chip tray Heidenhain TNC 113 Active Digital readout Space requirement approx. 2 x 2 x 2m Weight approx. 1,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitudinal travel: 400 mm cross travel: 160 mm table length: - mm table width: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Contour 3 / Dialog 4 total power requirement: 5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 5268: Universal tool milling machine Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Working area: 300 x 300 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.