tool master used for sale

Bending tool, die, lower knife, lower tool, prism tool -Tool for: press brake -Prisms: 90° 12 mm -Drawing: in the photos -Length: 4200 mm (2 x 2100 mm) -Dimension: 20 x 75 mm -Weight: 44 kg

width: 800 mm depth: 380 mm height: 1800 mm weight: 70 Kg Tool cabinet from sheet steel split in the middle. Width of 100 cm. with 2 sliding doors and adjustable shelves 8 Brand new item with minor defects. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 120 mm -Price: per piece -Number: 2 pieces -Weight: 13 kg

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool: 2 pillars -Punch: 5 pieces 20 x 2 mm, distance 20 mm -Price: per piece -Number: 3 pieces available -Dimensions: 280/140/H160 mm -Weight: 18 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 3 pieces -Profile diameter: 1/2 1 1 1/4 , dimensions see photos -Socket: Ø 25 mm -Price: complete -Dimensions: 490/540/H190 mm -Weight: 8 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 6 pieces -Profile diameter: 32 to 80 mm, see photos -Socket: Ø 36 mm -Price: complete -Dimensions: 490/540/H190 mm -Weight: 50.1 kg

Sharpening machine for band saw blades Manafacture: Alber Sharpening machine for band saw blades Sharpening circuit Fabr. Alber Model: TB1 - AE2 Year of construction: 1978

Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine, die tool, hemming tool -Tool: for press brake, die / hemming tool -Measures: see drawing in the photos -Dimensions: 150/101 / H75 mm / 150/77 / H159 mm -Weight: 7.2 kg / 11.4 kg

Folding bench TEKO Sheet thickness 1.9 mm Usable length 2025 mm Length 2500 mm Width 650 mm Height 1080 mm Weight 500 kg

Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine, die tool, hemming tool -Tool: for press brake, die / hemming tool -Measures: see drawing in the photos -Dimensions: 150/101 / H77 mm / 150/77 / H160 mm -Weight: 6.9 kg / 11.2 kg

Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine -Tool: for press brake, 12 pieces -Prisms: 25 ° x 10 mm -Drawing: in the photos -Lengths: see parts list in the photos -Dimensions total: 30/79/2917 mm -Weight: 47 kg

WE OFFER VERY NICE CONDITION - MIKRON WF3 S technical details: X-travel longitudinal 500 mm Y-travel cross 500 mm Z-travel vertical 380 mm spindle speed 12-steps 50-2240 UpM /rpm feed 1-750 mm/min spindle taper SK40 table size 800x445 mm drive capacity 7 kW weight 1650 kg

Bending bench Geka Max width 2.03 m Thickness 1 mm Scale 180° Bending beam spring-assisted Length 2.40 m Width 0.80 m Height 1.10 m Weight 500 kg

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for press brake, 6 pieces -Tool: for closing folds -Drawing: in the photos -Dimension: 20 x 70 x 495 mm -Price / fee: complete -Length total: 2970 mm -Total weight: 31.3 kg

Inv. Num. : 6445 Type: BF 74 Producer: CDM ROVELLA Generated: 2008 Parameters: Workpiece length: 800 mm Workpiece width: 550 mm travel length of the X-axis: 700 mm Travel length of the Y-axis: 400 mm Travel length of the Z-axis: 350 mm Maximum table load: 2000 kg Maximum electrode weight: 90 kg Tank dimensions: 1200 x 750 x 505 mm Weight: 4400 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 14 pieces -Tool angle: 25° -Drawing: in the photos -Dimension: 25 x 158 mm -Length total: 2615 mm (lengths see parts list photo) -Weight: 47.3 kg

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Tensioning tool: 270 mm -Groove: 14 x 36 mm -Dimensions: 270/20/H50 mm -Weight: 2.0 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -Prisms: 90° x 75 mm -Dimensions: see drawing in the photos -Dimensions: 2500/270/H175 mm -Weight: 188 kg

Item tool holders for milling machine with SK40 (inner suit M16) DIN 2080 SK40-ER16 Long milling mandrels for Horzon valley milling in different diameters, partly with bearings Short milling mandrels for holding cutter heads Recordings with Morse cone in different sizes Everything according to photos

chamfer lenght: 1370 mm Various tooling: 65 x 40 mm with 4 openings: 8, 10, 10, 35 mm. 6 pieces: 1370 mm Prices excl. VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel: 350 x 250 x 220 mm [ X x Y x Z ] max. workpiece size Z: 220 mm max. workpiece weight: 450 kg Table size X: 600 mm Table size Y: 400 mm with automatic wire threading U- / V-axis: 80 x 80 mm Cutting in a water bath Conicity angle 20° at height 80mm

Universal milling machine UF20 LVQE Table Y 320 mm X 1200 mm Z 800 mm Table length 1.55 m Speeds: 45 - 2000 rpm 16 A 380 V Length 1.30 m Width 1.20 m Height 1.90 m Swivel head Coolant pump Feed Accessories

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 99 mm -Price: per piece -Number: 2 pieces -Weight: 9.7 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Long hole punching tool: 10.5 x 23.5 mm -Stamping dimension: see photo with dimensions -Socket: Ø 30 mm -Dimensions: 230/200/H230 mm -Weight: 18 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Stamping dimension: see photo with dimensions -Socket: Ø 40 mm -Dimensions: 370/270/H275 mm -Weight: 67 kg

Travel: X, Y, Z 595mm x 400 mm x 450 mm Speed range from 30 - 1,800 rpm for horizontal and vertical Milling head to turn to the right and left with quill 75 mm Tool holder SK 40 Machine number 80003 Accessories: 3-axis digital display Heidenhain

Stock Number: 3805 Machines vice Manufacturer: ROEHM, Type: RKK 2 Machine NO.: 983 004 N Specifications: Width 115mm Max. öfning das schaubstock 0-170 mm Length: 350 mm, Height: 133 mm, Width: 125 mm, Weight: 33 Kg

Tool holder, milling holder, milling tool -Recording: MK4 -Length: 1103 mm -extendable to: 440 mm -Measurements see: drawing in the photos -Weight: 12.9 kg

Tool holder, milling holder, milling tool -Recording: MK3 -Length: 973 mm -extendable up to: 440 mm -Measurements see: drawing in the photos -Weight: 11.1 kg

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 10000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: Machine stand and carrier plate ground Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker >  ...

Key data: 530 mm

KELCH KALI-tec A tool presetter built in Germany in 2004 is a high-tech device for accurate measuring, presetting and simultaneous tool shrinking. The state-of-the-art KELCH tool presetter with integrated induction coil is offered with equipment that includes e.g. the electronic measuring system with intelligent image processing KELCH EasyVision and the KELCH Easy Webset computer software for tool measurement and inspection. The tool length is determined by the setting adapters before the chuck heating phase. The KALI-tec A tool measuring and presetting machine then automatically sets the tool exactly to the target length during the chuck opening phase by heating, while for more complex measuring tasks or tools made of high-speed steel the KELCH i-tec shrink-fit device shrinks the tool to the target length using intelligent calculations and pre-positioning of the setting pins. Tech ...

Die holder, notching tool, punching tool, punch, punching die, punching punch -Corner notching tool: punching on both sides -Material width adjustable from: approx. 200 to 440 mm -Stamping dimension: approx. 20 x 20 mm, see photo -Take: Ø 50 mm -Dimensions: 610/245/H380 mm -Weight: 122 kg

1. Disk Spring 2093F Ø80 x Ø36 x 4 mm - 5,400 pcs 2. Clamping Tool Large - 6 pcs For OD: 28 inch (711.2 mm) to 64 inch (1625.6 mm) Includes: Clamping Adapter Large; Cylinder Revolving Connector; Pants Rotating Coupling (3 m); Pneumatic Foot Pump XA12G

Ref. -No.: 10164 Manufacturer: DECKEL MAHO Year of construction: 1986 Type of control: CNC Control: CNC 432 Storage location: Halberstadt Country of origin: Deutschland Total connected load: 40 kVA X-Travel: 800 mm Y-Travel: 450 mm Z-Travel: 500 mm Feed force (X, Y, Z): X 800, Y 24000, Z 8000 N Quill Stroke: 100 mm Speed work spindle: 20-4000 RPM Feeds X/Y/Z: 1-3000 m / min Rapid Traverse X/Y/Z: 8 m / min Tool Taper: ISO 40 Space requirements: 3680 x 3780 x 2720 LxWxH (mm) Further information: Additional information: - with controlled rotary table Ø800 (B axis) - simultaneously controlled axes: 3 - axes controlled one after the other: 4

Tool changer chain, chain magazine, tool changing system, tool magazine -Spare part comes: from a machining center BJM type ALBZ-145 -Tool change system -CUT changer -RIG changer: RIG 06-12-P003 VX VCP -Drive motors: MGM -Dimensions: 1400/950/H830 mm -Weight: 380 kg

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: Forming tool / Press tool -Profile: Ø 45 mm -Dimensions: 535/195/H140 mm -Weight: 35 kg

Type: Die-sinking EDM machine Number: 21958 Category: Die-sinking EDM machines / EDM Manafacture: Makino Model: EDAF 3 Year of construction: 2016 Travel: 450 x 350 x 350 mm [ X x Y x Z ] Table size X: 700 mm Table size Y: 500 mm max. workpiece size X: 850 mm max. workpiece size Y: 650 mm max. workpiece size Z: 400 mm max. workpiece weight: 800 kg C-axis Linear scales (X,Y,Z) Control Hyper i Super Spark iV Super Surface Super Edge (incl. MF 4) Super Surface Graphite EROWA Robot Interface (A-Type)

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Dimensions: 20 x 70 mm -Length: 3020 mm -Weight: 22 kg

Stock Number: 3806 Machines vice Manufacturer: ROEHM, Type: RKK 2 Machine NO.: 151953 0004 P, Year of manufacture: 0 Specifications: Width 115mm Max. öfning das schaubstock 0-170 mm Length: 350 mm, Height: 133 mm, Width: 125 mm, Weight: 33 kg

width: 920 mm depth: 420 mm height: 1950 mm weight: 70 Kg Practical tool cabinet with 4 shelves Color RAL 6035 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4-column punching tool, parting tool, punching tool, punch, punching die, punching punch -4 pillars: punching tool -Dimensions: 395/195/H240 mm -Weight: 54 kg

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -2 pillars: punching tool -Dimensions: 170/100/H130 mm -Weight: 5.3 kg

Beading tool, punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool with: bending function -Admission bolts: 50 mm -Dimensions: 495/495/H430 mm -Weight: 282 kg

range L-W-H: 790 x 460 x 960 mm weight: 70 kg : 7 St. Tool trolley with 7 drawers equipped with tools - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - Drawer 1 1/4 premium ratchet. 1/4 knee joint 45 mm. 1/4 extension 100mm. 1/4 socket wrench 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4 long buttons 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8 premium ratchet. 3/8 knee joint 55 mm. 3/8 extension 150mm. 3/8 socket wrench 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8 long socket wrenches 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2 premium ratchet. 1/2 knee joint 75 mm. 1/2 extension 125mm. 1/2 Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32mm. 1/2 Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm. - DRAWER 2 Ring, ratchet and socket wrench set consisting of. Sockets 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22 ...

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -2 column punching tool -Recording: Ø 32 mm bolt -Dimensions: 270/290/H325 mm -Weight: 39 kg

Quick-change tool holder, tool holder head, quick-change tool holder -Recording dimensions: see photos -Dimensions: 133/55/H113 mm -Weight: 2.8 kg

Quick-change tool holder, tool holder head, quick-change tool holder -Mounting dimensions: dovetail width 39 mm see photos -Price per piece -Quantity: 3 pieces -Dimensions: 86/38/H60 mm -Weight: 0.8 kg/piece

Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories -for T-slot: 48 mm -Clamping height up to: approx. 350 mm -Clamping depth: 120 mm -Price: per piece -Number: 5 pieces -Dimensions: 180/100/H510 mm -Weight: 4.2 kg

Key data: 250 mm, 400 mm, 210 mm

Inv. Num. : 2399 Type: 254Y/FF3 Producer: HITACHI Created: 2004 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 210 mm Feed length in the U-axis ( -): -100 mm Feed length in the V-axis ( -): -100 mm Rapid traverse X/Y/Z: 1500 mm/min Max. workpiece dimensions: 600x400x210 mm Max. workpiece weight: 400 kg