137,365 used machines on RESALE, but how to find them? Machine Search
Praezision clamping tool Kombi plug-on pins BestNo. 1052-018 2 stub SK60x40x27 Unused and ovp 1 x as good condition Only against bid! Special price
Rapid Original TRM 350 Quick Release Holder type TRM350 Indexing 0.005 With 7 alternating necks 4 Pcs 201/350 34mm 1 St 202/350 Prima 32mm 2 Pcs 216/350 Diameter 50mm
SK40 DIN 69871 Oil Feeder met Holder Weldon 40mm A= 65mm For internal cooling for rails without internal cooling through the spindle
SK40 DIN 69871 Oil Feeder Weldon 32mm
Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -Tool holder: 27 mm -Number: 9 recordings -Price: per piece -Dimensions: 73/67/H197 mm -Weight: 4.7 kg
conus taper: 0 mm with milling disc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool clamping area: SK50 mm weight: 1 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
16 pieces tool holder external machining 41 tool holders internal machining
Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -different recordings: 10 -from: WNT-Mastertool -Sale: only complete -Price: complete -Weight: 36 kg
Tool holder, milling holder, milling tool -Recording: MK4 -Length: 1103 mm -extendable to: 440 mm -Measurements see: drawing in the photos -Weight: 12.9 kg
Item tool holders for milling machine with SK40 (inner suit M16) DIN 2080 SK40-ER16 Long milling mandrels for Horzon valley milling in different diameters, partly with bearings Short milling mandrels for holding cutter heads Recordings with Morse cone in different sizes Everything according to photos
length: 34 mm internal diameter: 2 - 13 mm amount: 14 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tool holder, milling holder, milling tool -Recording: MK3 -Length: 973 mm -extendable up to: 440 mm -Measurements see: drawing in the photos -Weight: 11.1 kg
Quick-change tool holder, tool holder head, quick-change tool holder -Recording dimensions: see photos -Dimensions: 133/55/H113 mm -Weight: 2.8 kg
Quick-change tool holder, tool holder head, quick-change tool holder -Mounting dimensions: dovetail width 39 mm see photos -Price per piece -Quantity: 3 pieces -Dimensions: 86/38/H60 mm -Weight: 0.8 kg/piece
Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -Shaft: Ø 50 x 95 mm -Inside diameter: 40 x 90 mm -Dimensions: 215 x 80 x 110 mm -Weight: 5.5 kg
Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -Inside diameter: 62 mm -Dimensions: 130/100/H86 mm -Weight: 3.7 kg
Quick-change tool post, tool post head, quick-change tool post -Mounting dimensions: 112 mm -Number: 5x steel holders available -Price: per piece -Dimensions: 160/55/H170 mm -Weight: 3.7 kg/piece
Tool holder for SK 40 chucks -made from: Polypropylene copolymer Impact and scratch resistant, heat resistant -resistant to: mineral oil and various chemicals Price: complete
Key data: 40 mm, 6 kg
1x VDI 40 steel bracket holder C4 C4-RC2040-51030 L= ; B= ; WeightG:= 3kg 2.2)58760 Cylindrical C4 adapter diameter 50x90mm 9x Inner Extractor Bracket 10x External Swivel Holder 3x outer piercing holder visible as far as possible 1) C4_R166_4KF-12060 Female Thread Swivel Holder 2) C4-B_SNR-27042-12 3) C4-R166.4FGZ-27050-16 External Rotary Bracket Right Triangular Plate : 4) C4-SDJCR-27050-11 External Swivel Bracket Right Triangular Plate 5) C4-DSSNR-27042-12 External swivel holder right 1x with plate, clamped from above 6) C4-SVJBR-27050-16 External swivel bracket right 1x with insert, Torx screws 7) C4-SDUCR-13080-11 Coro Turn Drill Rod, Internal Rotary Square Plate-Torx Sxamuk 8) C4-PCLNR-17090-12 Internal torque with clamping 9) C4-SVQBR 13090-16 Internal Rotary Holder Copy Plate 10) 3pcs C4-RF15.1230-G20-27050B & 27060B Cut-off holder sword Shipping costs on re ...
collets: 3 - 20mm tool taper: Sk 430 weight: 4,5 kg dimensions: 350 x 250 x 100 mm Collet set 21 pieces Collets for 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 18, 19, 20mm. Recording SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tool assembly block high quality for ISO 40, OSO 50, HSK 40 + 63 + 80 +100. Tool head can be changed by quick-release fastener. Tool can be swivelled 8x 45°.
tool clamping area: Ø 30 mm Shipping weight: 50 kg Packing: ca. 600400200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tool holder, extension -Shaft mount on both sides: Ø 71 mm -Drawing with the pictures -Transport dimensions: 1650/800/H450 mm -Weight: 370 kg
diameter: 250 mm tool adaptor: 250 length: 700 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tool holder, chuck for collets SANDVIK COROMANT BD 225 AN ( BD225AN ) 10-27-1528-42003 Inner diameter: Ø 33 mm Dimensions: 138 x 86 x 86 mm
Shaft with tool holder MK4 PAGUS Tool holder MK4 345756 60.000000.00200 2 Ball bearing sets: Ø 90 / 80 mm Flange diameter: Ø 115 mm New ! Dimensions: 250 x 115 x 155 mm
Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -Number: 1x recordings Manufacturer: Komet -partially with internal water cooling -Weight: 12 kg
Tool holder, tool mount, milling tool -Milling chuck: SK40 chuck, 4 pieces -Type: various designs, see photos -Price/Sale: complete -Overall dimensions: 220/140/H110 mm -Weight: 4.2 kg
Tool holder, reducing sleeve for MK tools with tightening thread BENZ GmbH D 45 x 4 x 90 ( D45x4x90 ) 024.064 4 90 SK 45 Tool: MK 4 Dimensions: 173 x Ø 83 mm New !' Dimensions(Packing): 240 x 90 x 90 mm
Tool holder, reducing sleeve for MK tools with tightening thread BENZ GmbH D 45 x 1 x 45 ( D45x1x45 ) 024.064 1 45 SK 45 Tool: MK 1 Dimensions: 128 x Ø 83 mm New !' Dimensions(Packing): 240 x 90 x 90 mm
Tool holder, combi milling cutter mandrel / BENZ GmbH D 50 x 27 x 63 ( D50x27x63 ) 042.231 27 82 SK 50 mandrel: Ø 27 mm Dimensions: 220 x Ø 98 mm New !' Dimensions(Packing): 260 x 120 x 120 mm
Tool holder, reducing sleeve for MK tools WMW C 45 x 5 x 185 ( C45x5x185 ) TGL 27260 SK 45 Tool: MK 5 Dimensions: 268 x Ø 80 mm New !' Dimensions(Packing): 290 x 120 x 110 mm
amount: 18 STK - for workpiece clamping on lathes, grinding machines and dividing headswith high concentricity and holding force - for workpiece clamping (bar or chuck work) in conventional conventional single-spindle lathes and CNC lathes directly in the spindle the spindle or in the collet chuck - Smooth bores are mainly used in the counter spindle of CNC lathes - Price as a set = 18 pieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Die holder, notching tool, punching tool, punch, punching die, punching punch, punching die, round die, die reduction -Manufacturer: Mubea, punching tool holder die reduction -Type: 105 - 80 mm mounts -Dimensions total: Ø 150 x 60 mm -Weight: 4.7 kg
Quick-change tool holder, tool holder head, quick-change tool holder, quick-change drilling tool holder, quick-change boring bar holder, quick-change turning tool holder -Quick-change boring bar holder: clamping diameter 44 mm -Recording dimensions: see photos -Dimensions: 144/72/H155mm -Weight: 2.9 kg
Tool holder, tool mount, milling tool -Milling chuck: SK40 chuck, 4 pieces -Type: various designs, see photos -Cutting head: Walter type F 2010 Ø80 mm -Disc cutter: Ø100 x 5 mm -Price/Sale: complete -Dimensions: 300/100/H195 mm -Weight: 7.4 kg
collets: 3 - 20mm tool taper: Sk 40 weight: 4,5 kg dimensions: 350 x 250 x 100 mm Collet set consisting of: A box of 18 pcs collets for 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 18, 19, 20mm. and a box with collet holder and key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HSK 100 267 pieces tool holders from Haimer, Mapal, Hoffmann and Nikken including scrap chucks, Weldon holders, slip-on milling mandrels and collet chuck for use
Approx. 170 tool holders, some with tools
Prism support solid steel Metrics: Width: 137 cm Depth: 40 cm Height: 30 / 50 cm - Scope of application: D750-D2250 - Steel on steel: 100 tons - Steel on intermediate layer: 200 tons - Net weight: 1100 KG More items - new and used - can be found in our shop! International shipping costs on request!
Turning tool holder, CNC internal turning tool holder -Various sizes -Outer diameter: Ø 63 mm -Sale: as a package -Weight: 9.5 kg
Turning tool holder, CNC internal turning tool holder -Outer diameter: Ø 60 mm -Sale: as a package -Weight: 2 kg
Quick-change tool holder, tool holder head, quick-change tool holder -Receiver dimensions: 90 mm -5x: various types of steel holders available (pictures on request) Price: per piece -Length: 125 mm -Weight: 2.5 kg
We have numerous Multifix steel holders, size C in various designs in stock. Partly also with drills and turning steels. Please inquire about exact dates and requests.
Tool holder, turning tool holder, tool holder, turning tool, turning tool holder -Dimensions of perforated plate: see pictures -Dimensions: 175/165/H65 mm -Weight: 6.6 kg
We have several Multifix steel holders, size D1D in various designs in stock. Partly also with drills and turning steels. Please inquire about exact dates and requests.
gebr. Steel Bracket Insert Fabr. Tripan, Type 431 Kj Uregwt Ucehyxkonb Please request the respective quantity individually.
We have several Multifix steel holders, size D1D in various designs in stock. Partly also with drills and turning steels. Please inquire about exact dates and requests. Gladly also in larger quantities.
maximum number of results exceeded
please refine your search
