128,672 used machines on RESALE, but how to find them? Machine Search
length: 720 mm width: 730 mm height: 1150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pipe peeling device, rotary peeling device, plastic pipe cutter, plastic pipe peeler, plastic pipe welding device -Diameter: Ø 32 mm -Weight: 0.4 kg
Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories
Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories
X-axis measuring range (tool diameter) approx. 400 mm Measuring range Z-axis (tool length) approx. 400 mm max. tool weight 10 kg Tool holder/basic holder SK 50 Tool adapter SK50 to SK40 with calibrated calibration balls Measured value display with operating instructions/manuals Well-maintained tool presetter in very good condition.
Adapters for tool presetters The adapter is inserted into the SK50 base holder of the tool presetter and thus serves as an intermediate module for Tool holders with size SK30 or BBT30. The adapter is calibrated and equipped with calibration balls.
A cassette set of bending tools for FASTI MAK
Various tools, Please note! without pallet / pallets Auction-ID: A1-43992-240
Tool trolley, 400kg load capacity - used - : Price per piece: 550.-€ (net) Manufacturer: unknown, probably Fetra Type: unknown Year of manufacture: unknown Payload: 400kg 2 fixed castors, 2 swivel castors, Wooden top with 3-sided edge 4 drawers, 1 cabinet door Width of wooden panel: approx. 1.20m Depth: approx. 69cm Height incl. wooden plate: 93cm Length with handle: approx. 1.30m Width steel structure: 1.04m Width door: approx. 46cm Height door: approx. 56cm Drawer width: approx. 43cm Depth of drawers: approx. 55cm Condition: good Available: immediately Location: Frankenberg camp / Saxony
Travel X/Y/Z: 290mm/150mm/330mm, vertical head stroke: 100mm, tool holder: SK40, speed: 2000rpm, feed rate: 500mm/min, rapid traverse: 1200mm/min, table dimensions X/Y: 600mm/195mm, max. table load: 150kg. Machine dimensions X/Y/Z: approx. 1250mm/1200mm/1400mm, weight: approx. 1800kg. On-site inspection is possible.
Key data: 600 mm, 400 mm, 350 mm
For sale Sodick CNC wire EDM machine type ALC 600G. Used CNC wire EDM machine with minimal soot traces. Type ALC600G Premium • With linear motors in X, Y, U and V directions • With Smart Pulse (SP) CNC generator • High-speed wire feeder unit • Smart Linear • Automatic wire feeder in 9 seconds • Triple filtration system •Jumbo 20kg wire roll feeder is standard • Smart control with 19" TFT multi touch screen Technical data machine: Travel X-Y axis: 600 x 400 mm Travel U-V axis: 150 x 150 mm Travel Z-axis: 350 mm Max. workpiece dimensions: 800 x 570 x 310 mm (in a water bath) 800 x 570 x 340 mm (coaxial flushing) Working tank dimensions: 1050 x 710 mm Max. workpiece weight: 1000 kg Distance between floor and top of the table: 995 mm Controlled axes: 5 (X, Y, Z, U, V) Max. positioning speed m/min: 2.0 Wire diameter ø: 0.1–0.3 mm (optionally 0 ...
Tool Milling Machine Cover FP4MK 2203 Travel XYZ: 500-400-400 mm Spindle mount: ISO 40 Spindle speeds: 50-2500 Universal Rotary Table 2038 incl. Angle Counter VRZ560 Active Digital Display 3 Axes Heidenhain TNC113 Hydraulic drawbar for DIN 2080 Quill with 90 mm stroke Coolant system Incl. vice Weight approx. 1700 kg Year of construction approx. 1992
CONTROLS PLC Press tool size Total weight max. 9,000 kg Weight of upper part of tool max. 4,500 kg Dimensions max width x depth 3,000 mm x 1,800 mmTool height max. 1,300 mm The turning table is as good as new. The pictures are example pictures.The original is grey, otherwise exactly the same.
Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.
Axles X 160 to infinity Y to max 1300 mm Z up to max 60 mm 6-fold tool changer
The machine is in good technical condition, after prior agreement it is possible to test it. , connected = can be demonstrated in operation. Machine system completely backed up on ext. HDD. Disconnection, reconnection and possibly future service agreed with EDM (exclusive importer and seller)
: mit Zubehör serial number: 71309 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, step blocks, clamping screws, T-slot screws, slotted screws, T-slot nuts -Clamping tool: Clamping bolt with T-slot nut -Bolt: Ø 27.5 mm -T-nut: 35/54 mm -Dimensions: Ø 100 x 700 mm -Weight: 5.5 kg
Die holder, notching tool, punching tool, punch, punch die, punch stamp -Punch tool: Ø 23.5 mm -Hole: Ø 122 mm -Matrix: Mounting diameter 70 mm -Overall dimensions: Ø 122 x 172 mm -Weight: 3.8 kg
Offer 25434 Technical data: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Autom. Quill feed - Quill stroke - Wind cutting device 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories
This ASYS Divisio 5100 is an automatic depaneling system manufactured in 2023. Contact us for more information.
This PROFILATOR DV370-HL-05 was manufactured in 2020. A robust and reliable unit, it is ideal for those looking to enhance their machining operations. Consider the opportunity to buy this PROFILATOR DV370-HL-05. Contact us for more information.
This M-PULSE 2k6e was manufactured in 2020. It features a modular controlling system, high-quality European components, and is designed for optimal integration into production lines or as a standalone solution. Safety is prioritized with triple redundant voltage measurement and internal safety discharge mechanisms. Energy capacity is 6060 Ws with a maximum voltage of 2000V. Contact us for more information about this machine.
This DEPO HF milling machine was made in the year 2012 and has 7 axis. The Stable 7-axis machine is specially developed for the manufacture of tools, molds and matrices.
This Emmegi VEGAMATIC was manufactured in 2008. It is an automatic cutting centre for aluminium profiles, featuring a feeder travel of 7395 mm and feed speed up to 60 m/min. The blade rotation angle ranges from -45° to +45°, with a standard blade diameter of 500 mm. Ideal for precise large-scale cutting tasks. Contact us for more information about this machine.
This HOFMANN CVK11-BH4 was manufactured in 2019. It is an balancing machine designed for precise and reliable operations. Ideal for applications requiring precise balancing of rotating components. Contact us for more information about this machine.
This COMCO CTR201-2 was manufactured in 2022. It features 1,264 machine hours and comes with a variety of options including a magnifier MB4320-1, abrasive hose MB1233-25, and replacement HEPA filter assembly CTR280-1. Additional parts include conductive nozzles and a 100 Micron Wheat Starch supply. Contact us for more information.
This Other FSW head was manufactured in 2023. Designed to integrate seamlessly with milling machines, it features friction welding technology. Ideal for enhancing your milling setup with advanced welding capabilities. Contact us for more information.
This OTEC DF10 was manufactured in 2016. It features a stainless steel process container and jog mode for easy workpiece changes. Includes additional storage for workpieces and holders, accommodating up to 10 holders. Equipped with water cooling DF-7 and a cooling compressor, its suitable for ambient temperatures between 10-40°C. Ideal for efficient media mixing and tool handling. Reach out for more information.
This 5-axis Mazak INTEGREX j-200S was manufactured in 2023. Ideal for complex machining tasks, it offers precision and versatility in a compact design. Consider the opportunity to buy this Mazak INTEGREX j-200S. Contact us for more information.
maximum number of results exceeded
please refine your search
50 € 
